[ANN] Best sgminer so far for x25x/lyra2Z/phi2/allium/lyra2REv3/yescrypt on AMD

[katar14]

HI

I use your mine software.(Beta5ip2)
I use RX580 8G run MTP is normal(hash is 1.4Mh). But I use the Vega 56 run MTP is not normal.（hash is 1.0Mh）
Please Help me. Whether it is necessary to set parameters specifically for vega video card.  Or the software does not support vega running MTP？

wow 1.4 mh/s??? for MTP alga for RX580??? I have 700 kh/s - what do you do?

[1713980178]

1713980178

[1713980178]

1713980178

[1713980178]

1713980178

[katar14]

Miner 5.6.1.3.b5h driver Adrenalin 18.6.1 RX 470 4GB 1100/1900
x22i 3.6 Mhs
ethash 26.25
lyra2Zz 1.4 Mhs
allium 3.0 Mhs (no change)
phi2 2.6 Mhs (no change)
lyra2Z 1.4 Mhs (no change)
lyra2rev2 22.7 Mhs
P.S. On the ethash algorithm on the same cards (in the same settings) Claymore's Dual Miner 12 gives 28.2 Mhs. Good job!

hello - mkxminer 4.2 have for lyra2Z 3.2 Mhs for rx480 8 gb - your rx470 4gb ebaut 2,8 mhs  

[fancyIX]

MTP have a lot of rejected shares (duplicate) in all pools less zergpool, but in zergpool less hashrate

Which version are you using?

5.6.1.3.b5ip3

Did you try another pool. Mintpond seems working well

[fancyIX]

HI

I use your mine software.(Beta5ip2)
I use RX580 8G run MTP is normal(hash is 1.4Mh). But I use the Vega 56 run MTP is not normal.（hash is 1.0Mh）
Please Help me. Whether it is necessary to set parameters specifically for vega video card.  Or the software does not support vega running MTP？

wow 1.4 mh/s??? for MTP alga for RX580??? I have 700 kh/s - what do you do?

Latest version can do 1.6mhs. You need oc memory and maybe bios mod.

[twotwosix]

MTP have a lot of rejected shares (duplicate) in all pools less zergpool, but in zergpool less hashrate

Which version are you using?

5.6.1.3.b5ip3

Did you try another pool. Mintpond seems working well

Tried

http://i64.tinypic.com/2ntbgx0.jpg

Work fine 20-50 shares and after a round of duplicate shares, then valid shares and then duplicates, only work good zergpool but with low hash

[fancyIX]

MTP have a lot of rejected shares (duplicate) in all pools less zergpool, but in zergpool less hashrate

Which version are you using?

5.6.1.3.b5ip3

Did you try another pool. Mintpond seems working well

Tried



Work fine 20-50 shares and after a round of duplicate shares, then valid shares and then duplicates, only work good zergpool but with low hash

I suggest add "-w 64".
If it still not working, try "-d 0" to see if one card works or not.

[serg_25]

@fancyIX works good for me without rejects. Only needed to lower intesity to 20 from 21.
 mintpond works better than 2miners.

Only one question what could be a possible issue that i can't use -g 2 option? error -33\43 different.
Rig has 8gb ram. linux.  6gpu
-w 64 -I 20 works good. If add -g 2 = error.

Btw you kernel works faster than djm34.  https://github.com/zcoinofficial/sgminer/releases

[ep690d]

Hi,

please add support to yescrypt algo.

Thanks

[alucard20724]

FYI... MTP showing up on nicehash

https://www.nicehash.com/marketplace/mtp

[DMCivan]

How to setup Vega56 for Lyra2rev3?

I only get 55 mhs pet Vega56?

[alucard20724]

How to setup Vega56 for Lyra2rev3?

I only get 55 mhs pet Vega56?

-k lyra2v3 -g 1 -w 256 -I 24
i get about 70mh

[fancyIX]

How to setup Vega56 for Lyra2rev3?

I only get 55 mhs pet Vega56?

Use teamredminer, should be faster

[HaloGenius]

@fancyIX

FYI Nicehash recently added MTP algo. Ofc there no miners which compat with their stratum

[styleshifter]

@fancyIX

Great work!
I would like to give some feedback to help you to get even more users.

You should update your first post in this thread.

• In the subject you didn't write that your miner supports ethash.
• You should mention the dev fee. Is it still zero?
• How about a simpler versioning? 5.6.1.3.b5ip3 is hard to read.

[dazzmore]

Anyone has hashrate for vega 56 on MTP?

[UnclWish]

Miner needs nicehash support!

[NCarter84]

FancyIX, is this project now dead?

[fancyIX]

FancyIX, is this project now dead?

The new release with x25x support will come soon.
But I don't have so much time for this project as before, because I am busy with other stuff.
In any case, what features do you expect?

[fancyIX]

Supports Windows and Linux. Supports windows driver and Linux AMDGPU Pro driver. Supports most cards. Comes with pre-built binary kernels to speed up Ellesmere and Vega cards.


https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b4b

Estimated speed:
phi2, rx 580: 1800khs; vega 56: 3300khs
lyra2Z, rx 580: 830khs; vega 56: 1620khs

I know that's far below the speed of tdxminer or teamredminer, but it's supports windows and Vega on Linux. And I am working on improving it. Hope one day it can be comparable with tdxminer.

Beta5 release, about 30% faster
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5

Beta5b release:
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5b
Speed compare of release (beta5b) than previous release (beta5): 580 +25%, Vega56 +35% for phi2, and 580 -15%, Vega56 +35% for lyra2Z .

Beta5c release, added allium support. Others are the same as beta5b.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5c

Beta5d release, much faster than beta5c, especially for 580.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5d

Beta 5e release, now support x22i. Others keep the same as beta5d:
https://github.com/fancyIX/sgminer-phi2-branch/releases
Will improve the performance further.

Beta5f release. x22i over 25% faster than beta5e, lyra2rev2 over 4x faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5f+ release, for x22i, 580 5% faster, Vega56 15% faster. ADL added so that you can monitor your GPU. https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5f++: little bit faster. https://github.com/fancyIX/sgminer-phi2-branch/releases

Windows version may hang. If so, please revisit the release page and download the fixed file.

Beta5f++++ release, vega 10% faster. 580 improved a bit, for x22i.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5fp5 release, x22i around 5% faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5gp1 release, lyra2REv3 support. Comes with prebuilt bin kernels for better performance.
Estimated speed: Vega56 64mhs, 580 41mhs.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5gp1

Beta5gp3 release, added lyra2Zz support.
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beat5h release, starts to support ethash:
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5hp1, starts to support argon2d. Maybe a little bit faster or slower than Dynamic-GPU-Miner-AMD
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5i, added mtp support (still under testing)
https://github.com/fancyIX/sgminer-phi2-branch/releases

Beta5ip1, fixed mtp crash problem
https://github.com/fancyIX/sgminer-phi2-branch/releases

0.6.0.0, support x25x
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b6

[dragonmike]

Hah, nice one FancyIX.
Shame SUQA/SIN yields virtually nothing for GPU miners anymore with the lowered block reward etc. That x25x fork is basically completely useless unfortunately.