GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[angelbbs]

Gminer 1.39, Win 7, driver 419.67

16:31:14 Anti-hacking system detected modification of the miner memory. If you u
sing an antivirus, add miner to antivirus exceptions
16:31:14 Miner terminated, watchdog will restart process after 10 seconds

No antivirus, firewall , debugger, etc.
Only reboot helps...

2dev: Please, improve or disable anti-hacking system.

[serhanni]

Will there be any support on Aion for AMD cards in the future?

[impynick]

Gminer is faster on my 1080ti than miniZ but my 1070s are better on miniZ

My GTX1060 and GTX1070 are faster a little bit while mining different Equihash coins with mini-Z miner. But, in my opinion, Gminer is the best on Grin.

Sorry forgot to mention I’m talking about 144,5

[Zminer777]

Will there be any support on Aion for AMD cards in the future?

do you think it will be profitable for AMD cards? I'm not sure

[Shaddyr]

GMiner v1.39 available for download

v1.39
+ Fixed anti-hacking error on newest Nvidia drivers

Looks like it didn't. (nVidia 25.21.14.2531)

[iRonNuke]

Planning to support AMD at Grin31? I think many Radeon VII would love to mine Grin31 because it loves memory

[Zminer777]

GMiner v1.40 available for download

v1.40
+ Significant performance improvements for BEAM (Equihash 150,5) on Nvidia cards

Performance on stock GPU settings:
Beamhash(Equihash 150,5):
Palit GTX 1060 JetStream 3GB ~12.5 Sol/s
Palit GTX 1060 JetStream 6GB ~14.5 Sol/s
Palit GTX 1070 Dual 8GB ~22.5 Sol/s
Palit GTX 1070 Ti JetStream 8GB ~26.5 Sol/s
MSI GTX 1080 SEA HAWK EK X 8GB ~29 Sol/s
Gigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~40 Sol/s
MSI RTX 2070 Armor 8GB ~30 Sol/s
MSI RTX 2080 DUKE 8GB ~41 Sol/s

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/1.40

[Divinity666]

GTX1070@132Wt - 25.5Sol\s
GTX1080@160Wt - 30.0Sol\s
GTX1080Ti@205Wt - 41.0Sol\s

lets see what pool will report after a while.

[VasilyS]

GTX1660Ti is only 17 sol/s, for these cards x16r algo is the best. GTX1050Ti gives about 8-9 sol/s - very good result.

[topteam]

Not stable for me
Crash on one card, intensity 90 not help

Code:

Error on GPU2: an illegal memory access was encountered

Too much connection error

Code:

Connection Error: Write timed out
Connect to eu-beam.ss.btc.com:1800 Failed: Host not found (non-authoritative), try again later
Connected to eu-beam.ss.btc.com:1800

[Shaddyr]

GMiner v1.39 available for download

v1.39
+ Fixed anti-hacking error on newest Nvidia drivers

Looks like it didn't. (nVidia 25.21.14.2531)

1.40 - no changes about above

[CuChO]

Love the new UI Launcher MiniZ

Oops sorry I meant GMiner

[Dr_Victor]

GTX1070@132Wt - 25.5Sol\s
GTX1080@160Wt - 30.0Sol\s
GTX1080Ti@205Wt - 41.0Sol\s

lets see what pool will report after a while.

Did you run the pill? What is your overclock, pls?

[Divinity666]

Did you run the pill? What is your overclock, pls?

No pill, as I didn't notice that it gives any boost to Beam. OC in different for every card, for TI i use 0.8V and clocks can be 1670mhz or 1721mhz depending on card. In don't OC their memory, so its 5499mhz, so its even -5mhz - I noticed it give a little bit of boost over default 5503mhz in games\mining, probably there is timings step at 5500 and going over it by 3mhz is pointless. So for 1080 I set mem. clock to 5499 as well since it's basically the same gddr5x. For 1070 I tried to set 4498mhz mem for all, but some cards we unstable, so I lowered it until they stopped crashing. With core voltage you'll just have to find the value that will give you desired power consumption and then find max. stable clock for it(though raising clock would increase power consumption a bit as well:) ) It's just impossible to make a generalization on OC'ing polaris cards of the same model: some cards work 1746mhz@813mV and another 1860@881mV and later would have less power consumption...

[Dr_Victor]

Did you run the pill? What is your overclock, pls?

No pill, as I didn't notice that it gives any boost to Beam. OC in different for every card, for TI i use 0.8V and clocks can be 1670mhz or 1721mhz depending on card. In don't OC their memory, so its 5499mhz, so its even -5mhz - I noticed it give a little bit of boost over default 5503mhz in games\mining, probably there is timings step at 5500 and going over it by 3mhz is pointless. So for 1080 I set mem. clock to 5499 as well since it's basically the same gddr5x. For 1070 I tried to set 4498mhz mem for all, but some cards we unstable, so I lowered it until they stopped crashing. With core voltage you'll just have to find the value that will give you desired power consumption and then find max. stable clock for it(though raising clock would increase power consumption a bit as well:) ) It's just impossible to make a generalization on OC'ing polaris cards of the same model: some cards work 1746mhz@813mV and another 1860@881mV and later would have less power consumption...

As I mentioned the pill, I meant gtx 1080 ti. It looks like TDP is about 70%.

[rednoW]

Did you run the pill? What is your overclock, pls?

No pill, as I didn't notice that it gives any boost to Beam. OC in different for every card, for TI i use 0.8V and clocks can be 1670mhz or 1721mhz depending on card. In don't OC their memory, so its 5499mhz, so its even -5mhz - I noticed it give a little bit of boost over default 5503mhz in games\mining, probably there is timings step at 5500 and going over it by 3mhz is pointless. So for 1080 I set mem. clock to 5499 as well since it's basically the same gddr5x. For 1070 I tried to set 4498mhz mem for all, but some cards we unstable, so I lowered it until they stopped crashing. With core voltage you'll just have to find the value that will give you desired power consumption and then find max. stable clock for it(though raising clock would increase power consumption a bit as well:) ) It's just impossible to make a generalization on OC'ing polaris cards of the same model: some cards work 1746mhz@813mV and another 1860@881mV and later would have less power consumption...

As I mentioned the pill, I meant gtx 1080 ti. It looks like TDP is about 70%.

Palit Jetstreams 1080ti, 88% tdp, the pill and +200 mem clock, mem clock compute mode disabled in nvprofileinspector resulting 5702mhz effective mem clock. Gpu clock by curve and fixed to 1683mhz@775mv (afterburner)
42sols @ 195 watt

[IceMaNoFF]

i test again...1.40vs1.38
https://c.radikal.ru/c19/1905/ab/3f0981e52f94.png

[Zminer777]

i test again...1.40vs1.38

Hi,

v1.40 has no changes for 144.5/192.7, we will improve 144.5/192.7 in next updates, we will add note about this in release description.

Best Regards.

[VanDeinsberg12]

GTX1660Ti is only 17 sol/s, for these cards x16r algo is the best. GTX1050Ti gives about 8-9 sol/s - very good result.

Hey vas, just curious about your opinion which is better in your opinion regarding this case. Im a bit interesting to buy 1660Ti but after seeing your post and it looks like i can get some 1050ti with the amounts that i can use it to buy one 1660TI. Which is better a few 1050Ti or a single 1660Ti? Any thought? Feeling free to get an opinion from others too.

[joseph32]

GTX1660Ti is only 17 sol/s, for these cards x16r algo is the best. GTX1050Ti gives about 8-9 sol/s - very good result.

Hey vas, just curious about your opinion which is better in your opinion regarding this case. Im a bit interesting to buy 1660Ti but after seeing your post and it looks like i can get some 1050ti with the amounts that i can use it to buy one 1660TI. Which is better a few 1050Ti or a single 1660Ti? Any thought? Feeling free to get an opinion from others too.

I still have 3x 1050 Ti EVGA running. In ETH all 3 makes 44-45 MH/s with just 144W (equals ~$0.60/day minus your electricity). BEAM needs 225W at nearly same earnings. If you have to pay electricity, ETH is your way. If not, BEAM is fine. But I wouldnt buy 1050 Ti's anymore. Low earnings, extremely low resale value.