GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[highlander1992]

Can anybody help me with memory controler load below 20% which mean asus rog strix rtx 2060 gets very low hash rate and low power consumption.Cant get it stable more than 1 hour.
My settings are:

GPU clock: 1410 mhz
Memory clock : 7651 mhz
voltage:781V

I had problem with phoenix,t-rex and now gminer.Cannot find stable hash rate more then one hour,then some kind of memory leak happens.I tried many oc settings and nothing helps.

Core -502 mem +2100-2290 Linux. Windows core -502 mem 1100-1300

I even tried stock settings after completly unistaling nvidia driver with DDU and problem is there! Is my gpu defective with some memory leaking problem???

[aypro]

The information in the --help screen is not accurate:
The --kernel/-k option doesn't do anything in the command line nor in the config file, i had to use --oc to switch kernels.

[skablast]

Its just me or using
--cache_dag on for eth +zil
and SAFE Dag 2 for safe dag generation at extreme overclock
produce a 5-/6 % Hashrate decrease on RT 30xxs family ?

[Wotan Wipeout]

Well done on GMiner 2.50.

Still testing how high i can boost the vram. I wait days to be sure it works.

-----+----+-----+-----------+--------+----+-----+-----+-------------+
| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-------+----+-----+-----------+--------+----+-----+-----+-------------+
| 0 3070 38 C 0 % 62.07 MH/s 1621/0/0 1440 8100 112 W 554.18 KH/W |
| 1 3070 35 C 0 % 62.18 MH/s 1514/0/0 1290 8100 112 W 555.18 KH/W |
| 2 3070 35 C 0 % 62.18 MH/s 1514/0/0 855 8100 113 W 550.22 KH/W |
| 3 3070 33 C 0 % 62.18 MH/s 1565/0/0 1200 8100 112 W 555.16 KH/W |
| 4 3060Ti 65 C 32 % 61.42 MH/s 1515/0/9 1365 8000 120 W 511.86 KH/W |
| 310.02 MH/s 7729/0/9 569 W 544.86 KH/W |
+---+-------+----+-----+-----------+--------+----+-----+-----+-------------+
12:47:28 Uptime: 2d 15:55:40 Shares/Minute: 2.02 Electricity: 36.371kWh
12:47:31 New Job: 569fe870 Pool: eth.2miners.com:2020 Diff: 8.72G

[Zminer777]

GMiner v2.50 available for download

v2.50
+ auto fan feature, now you can set target fan temperature (--tfan, --tfan_min, --tfan_max, Windows only)
+ reset overclocking before DAG generation (Windows only)
+ improved beamhash performance (~+2%)
+ improved cuckatoo32 performance (~+5%)
+ added display of GPU model in statistics table
+ added --worker parameter to specify worker name for ETH pools thats doesn't support wallet.worker notation
+ added option to display date in log (--log_date)
+ added option to log stratum (--log_stratum)
+ display epoch and block number on new job
+ updated Web UI for --api
+ uses --proto stratum for NiceHash by default
+ removed algorithms: VDS, BFC
+ bug fixes and stability improvements

Ethash fee is 0.65%
KAWPOW fee is 1%

[Akyboy]

2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?

[WARMANGALAXY]

2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?

check if the pool and your wallet address are specified correctly in the configuration file of the miner

[Akyboy]

2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?

check if the pool and your wallet address are specified correctly in the configuration file of the miner

I didn't change anything in my bat file. Just replaced old version .exe with new one

[TBOEMC]

2.50 is broken.
Not reporting to the pool but mining

...i have similar problem
RTX 2080 cannot start - miner stops right before cards recognizing.
No "green" list with card names.

my other cards are OK (2070 and 2070S, 2080S, 30xx)

[limis]

hi,
using GMiner 2.50 with ethermine ant see some 1-3% stales everyday but GMiner statistics windows show no stales.
It is always  like shares X/0/0

Is it normal ?

[magicxs]

2.50 is broken.
Not reporting to the pool but mining

similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker name

[ztaz]

2.50 is broken.
Not reporting to the pool but mining

similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker name

a similar situation with version 2.50 - everything was lost to the worker from the pool, there was only one eth1.0

[hopfi2k]

2.50 is broken.
Not reporting to the pool but mining

similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker name

Adding the

Code:

--worker

parameter resolved the issue for me...

[Papa Piddin]

How do you add the --worker command ? Do you delete the worker name and "." after the eth wallet address, then add worker command with space then worker name?

I am in work for 12 hours so only noticed the "problem" on my pool dashboard

I have the same problem with my 2 workers just showing as 1 worker named eth1.0 at the pool.

Shares looks normal for my total hashrate of 180mh, but my reported hashrate are a lot lower and spiking with variable figures.

On Gminer 2.49, pool reported numbers matched my Hashrate on local screen.
 

[Akyboy]

How do you add the --worker command ? Do you delete the worker name and "." after the eth wallet address, then add worker command with space then worker name?

I am in work for 12 hours so only noticed the "problem" on my pool dashboard

I have the same problem with my 2 workers just showing as 1 worker named eth1.0 at the pool.

Shares looks normal for my total hashrate of 180mh, but my reported hashrate are a lot lower and spiking with variable figures.

On Gminer 2.49, pool reported numbers matched my Hashrate on local screen.
 

Yes papa.

Like this:
miner.exe -a ethash  --server eth-us-east.flexpool.io:5555 --ssl 1 -u YOURADDRESS --worker RIGNAME
pause

[Papa Piddin]

Yes papa.

Like this:
miner.exe -a ethash  --server eth-us-east.flexpool.io:5555 --ssl 1 -u YOURADDRESS --worker RIGNAME
pause

Thanks will give it a go when I get home from work 

[Akyboy]

Yes papa.

Like this:
miner.exe -a ethash  --server eth-us-east.flexpool.io:5555 --ssl 1 -u YOURADDRESS --worker RIGNAME
pause

Thanks will give it a go when I get home from work 

Welcome!

[WARMANGALAXY]

Does this miner support and RX 580/570 cards to mine Raven.  when ever I try to use it, I get this error message!

12:01:14 Failed to initialize miner on GPU0: MSI Radeon RX 570 Series 4GB [0000:01:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU1: ASUS Radeon RX 570 Series 4GB [0000:04:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU2: SAPPHIRE AMD Radeon (TM) RX 470 Graphics 4GB [0000:05:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU3: SAPPHIRE Radeon RX 570 Series 4GB [0000:06:00.0]: Device not supported for this algorithm
12:01:14 No devices for mining

thanks

you need used linux

[TBOEMC]

Does this miner support and RX 580/570 cards to mine Raven.  when ever I try to use it, I get this error message!

12:01:14 Failed to initialize miner on GPU0: MSI Radeon RX 570 Series 4GB [0000:01:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU1: ASUS Radeon RX 570 Series 4GB [0000:04:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU2: SAPPHIRE AMD Radeon (TM) RX 470 Graphics 4GB [0000:05:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU3: SAPPHIRE Radeon RX 570 Series 4GB [0000:06:00.0]: Device not supported for this algorithm
12:01:14 No devices for mining

thanks

you need used linux

Ravencoin doesnt have big DAG, so 4GB cards are OK, for example ETC, BeamhashIII and others...

[miner29]

Does this miner support and RX 580/570 cards to mine Raven.  when ever I try to use it, I get this error message!

12:01:14 Failed to initialize miner on GPU0: MSI Radeon RX 570 Series 4GB [0000:01:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU1: ASUS Radeon RX 570 Series 4GB [0000:04:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU2: SAPPHIRE AMD Radeon (TM) RX 470 Graphics 4GB [0000:05:00.0]: Device not supported for this algorithm
12:01:14 Failed to initialize miner on GPU3: SAPPHIRE Radeon RX 570 Series 4GB [0000:06:00.0]: Device not supported for this algorithm
12:01:14 No devices for mining

thanks

you need used linux

I am using Linux!  That is where I get that error!

Since AMD i suggest TeamRedMiner  see if you get the same error