GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[sxemini]

GMiner v2.66 available for download

v2.66
+ improved KAWPOW (Ravencoin) performance under Linux on Nvidia GPUs
+ added AMD implementation for KAWPOW (Ravencoin)
+ improved compatibility with Ethash pools

Any plans for ERG+Zil support? Do you plan to support verthash?

[Lucky - Luciano]

Performance for Raven coin (KAWPOW) is much lower than with Team Red Miner. GMiner gives me only 9.60 MH / s and Team Red Miner even 14.25 Mh / s on the RX480 4 GB graphics card ( to the left is GMiner and to the right is Team Red Miner )  :

[ferk]

Any chance to set up Gminer with the variable hashrate from 2.64? I use the pc while mining and it's better this way because I know when something (chrome tab, app window) is consuming excessive GPU resources that lowers Gminer performance so I can close them.

[Shivoreun]

Hi to all. Sorry, if this quiestion was already asked and answered...
How to configure Gminer for ETH+ZIL mining, but with different pools for each coin?

[WARMANGALAXY]

Hi to all. Sorry, if this quiestion was already asked and answered...
How to configure Gminer for ETH+ZIL mining, but with different pools for each coin?

Look in the folder with the miner there is already configured binary on the example of Shardpool EZIL and 2Miners

[WARMANGALAXY]

Any chance to set up Gminer with the variable hashrate from 2.64? I use the pc while mining and it's better this way because I know when something (chrome tab, app window) is consuming excessive GPU resources that lowers Gminer performance so I can close them.

You need to increase the PL

[doctorman]

switching over from Phoenixminer, 
would appreciate some quick help on RTX 3000 series  (no LHR)
what parameters are recommended for these cards? 

3060ti
3070
3090

I use cclock and clock and power limit

is there a use for  lock clock , lock voltage and ccdvc  on RTX 3000 series?

would locking clock better than limiting ?

[dedizonesv2]

switching over from Phoenixminer,  
would appreciate some quick help on RTX 3000 series  (no LHR)
what parameters are recommended for these cards?  

3060ti
3070
3090

I use cclock and clock and power limit

is there a use for  lock clock , lock voltage and ccdvc  on RTX 3000 series?

would locking clock better than limiting ?

on hiveOs

3060Ti 1410 / 2200 or 2400 / 150
3070 1070 / 2200 or 2400 / 150
3080 1060 / 2200 or 2400 / 230 ( on my rig suprim X 3080)

Fan 65%

[Sergey2015]

Hello Everyone, help me set up a batch file with  parameters mt
miner.exe --algo etchash --server etc-eu2.nanopool.org:19999 --user 0x...........0.MyRiG --mt 4

[WARMANGALAXY]

Hello Everyone, help me set up a batch file with  parameters mt
miner.exe --algo etchash --server etc-eu2.nanopool.org:19999 --user 0x...........0.MyRiG --mt 4

'--mt' - space-separated list of memory tweak numbers for each device (range from 0 to 6, 0 - disable tweaks), only Nvidia GPUs with GDDR5X and GDDR5 memory are supported, requires running miner with admin privileges (for example: '1 3 5')

[rme30]

Will GMiner include the Autolykos2 algo for ERGO mining in next versions?

[WARMANGALAXY]

Will GMiner include the Autolykos2 algo for ERGO mining in next versions?

no

[Ramsete2]

I noticed that GMiner is consuming system RAM over time, till forcing the reboot of the rig.
This is happening just on my AMD rig, not on the NVidia ones.
Any solutions/ideas?

[Zminer777]

GMiner v2.67 available for download

v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal

Ethash fee is 0.65%
KAWPOW fee is 1%

[aclass]

Should the power draw be highly volatile... jumping up and down every couple of seconds?

GMiner v2.67 available for download

v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal

Ethash fee is 0.65%
KAWPOW fee is 1%

[ManuBBXX]

GMiner v2.67 available for download

v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal

Ethash fee is 0.65%
KAWPOW fee is 1%

How much can we expect without rejects / lock shares with a 3080 lhr ?

[Ramsete2]

I noticed that GMiner is consuming system RAM over time, till forcing the reboot of the rig.
This is happening just on my AMD rig, not on the NVidia ones.
Any solutions/ideas?

Nobody could help me?
Unfortunately I'm forced to use another miner, since I got this problem just with GMiner...

[darkdrive]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

[dedizonesv2]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

what rugle on firewall, possible post here your script firewall ?

tks

[miner29]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

Why do you have any info on your mining rig?

Rig should only be for mining.  As for access to ip its usually for dev pool update / check for miner update.