arielbit
Legendary
 Offline
Activity: 3402
Merit: 1059
|
 |
January 17, 2019, 05:01:07 PM |
|
note crosspost from bminer: v. 12.1.0
both windows 7 and driver 417.35
1080ti 1 card rig: ~6 G/s
1080ti 4 card rig: ~3 G/s per card
any possible problem with the 4 card rig?, power and temps are down too in the 4 card rig..nothing power limit and clocks can do, increasing to 120 power limit will gain 0.2 G/s max. with occasional miner crash/restart.
with 391.35 on 4 card rig, no occasional miner crash/restart but still ~3 G/s per card
while bminer turns my 4 card rig to 3 G/s per 1080ti, this one..gminer 1.19 gives only 1.5 G/s per card |
|
|
|
|
|
|
|
|
|
Bitcoin addresses contain a checksum, so it is very unlikely that mistyping an address will cause you to lose money.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
ol92
|
|
January 17, 2019, 05:59:24 PM |
|
why doesn't c29 work with 8gb win10?
Because windows 10 doesn't allow use entire video memory, miner require about 7GB of memory, however windows 10 doesn't allow to allocate 7GB. I suggest use linux, under linux you will even never think about page file size, it always work on standard system settings with any number of devices. why is win10 so stupid  The problem is between wddm 2 (the video driver model of win 10) and nvidia driver. On my amd vega (8G), I have no problem running the miner with 7G allocation on win 10, whereas with the nvidia 8G, this doesn't work. Nvidia has tcc driver which put the card in compute mode (pure mode without wddm) but it is restricted to pro card or titans., not for geforce. |
|
|
|
|
freedom777
Newbie
Offline
Activity: 49
Merit: 0
|
|
January 17, 2019, 10:58:59 PM |
|
Hi! We have several rigs on windows 7. Windows 10 rigs works fine on "Grin" algo, but on win 7 all GPU(1080Ti) show 0.9H/s with last driver also! You have any idea whats wrong? |
|
|
|
|
Balandar
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 18, 2019, 12:21:44 AM |
|
Not sure if this has been posted, but BEAM on a GTX 1050 Ti 4GB fails to run on Win10.
|
|
|
|
|
|
Elder III
|
|
January 18, 2019, 12:32:46 AM |
|
Not sure if this has been posted, but BEAM on a GTX 1050 Ti 4GB fails to run on Win10.
Beam does not work on cards with 4gb of vram. |
|
|
|
|
joenuno1
Newbie
Offline
Activity: 4
Merit: 0
|
 |
January 18, 2019, 02:59:33 AM |
|
To Zminer777, thank you for such an incredible miner. You continue to be the most efficient and best miner out there for your algos.
You just introduced Grin with Cuckaroo29 and want to give you my feed back:
It is smooth as always and very dependable. Your competition is always behind you EXCEPT 1, Bminer. Bminer is running 25% faster than your miner. Bminer is also much less cpu intensive compared to all the other grin29 algo miners. For mining rigs with weaker cpu's, it's difficult for them to function with the cpu maxed out. Issues I'm seeing after running all available miners is: regardless that all gpu's are the same, they hash at much different rates. not good. Also the cpu issue is a big problem and maybe that is part of the reason for different hashing rates on identical gpu's. High virtual memory size is more demanding. Love to see all those problems go away like you have done with previous updates. Gminer also doesn't need this Microsoft core update which some miners need to function (not sure if that is an issues at all).
Bminer isn't very good at updates and you are! Cuckaroo29 is an incredible and profitable coin right now when the rest of the market isn't seeing much of any growth. It's feeling like the market is in a bull run with this coin and the money it makes right now. Please work your magic in your coding to make Gminer the top miner that it is. I'm so excited right now and haven't had this feeling in a year with the market. Let's make some excitement!
Thanks so much for what you do for Crypto! Thanks again for your hard work and time.
ps, Currently, Gringold, Bminer, NBminer are the Nvidia miners for Windows along with the others listed on pool sites are the competition.
Sincerely,
Billy
|
|
|
|
|
Balandar
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 18, 2019, 04:09:18 AM
Last edit: January 18, 2019, 01:59:38 PM by Balandar |
|
Beam does not work on cards with 4gb of vram.
Beam works on AMD 4gb cards. Also Gminer checks when starting if the card has 4gb, which it confirms, but Crashes with an out of memory message. Are nvidia 4gb cards not up to the task then? Edit: the amd 290x 4gb card is using the OpenCL miner, which also doesn’t work on the 1050 to 4gb. I get a fatal error message. |
|
|
|
|
obm_dan
Member
Offline
Activity: 112
Merit: 13
|
|
January 18, 2019, 05:13:43 AM |
|
Support for gminer has been added to Foreman. Now you can monitor your rigs remotely.  |
|
|
|
|
Ike2k
Newbie
Offline
Activity: 7
Merit: 1
|
|
January 18, 2019, 05:17:06 AM |
|
why doesn't c29 work with 8gb win10?
Because windows 10 doesn't allow use entire video memory, miner require about 7GB of memory, however windows 10 doesn't allow to allocate 7GB. I suggest use linux, under linux you will even never think about page file size, it always work on standard system settings with any number of devices. nope for me it works great with 1070 and 1070 TI but you have to increase the virtual Memory significant from Windows.  http://swissforce-clan.ch/1.jpg |
|
|
|
|
arielbit
Legendary
Offline
Activity: 3402
Merit: 1059
|
|
January 18, 2019, 09:07:03 AM |
|
note crosspost from bminer: v. 12.1.0
both windows 7 and driver 417.35
1080ti 1 card rig: ~6 G/s
1080ti 4 card rig: ~3 G/s per card
any possible problem with the 4 card rig?, power and temps are down too in the 4 card rig..nothing power limit and clocks can do, increasing to 120 power limit will gain 0.2 G/s max. with occasional miner crash/restart.
with 391.35 on 4 card rig, no occasional miner crash/restart but still ~3 G/s per card
while bminer turns my 4 card rig to 3 G/s per 1080ti, this one..gminer 1.19 gives only 1.5 G/s per card found the issue, to run at 5.x G/s for 1080ti ---->max of 3 cards only for bminer..seems amount of cards is an issue.. |
|
|
|
|
freedom777
Newbie
Offline
Activity: 49
Merit: 0
|
|
January 18, 2019, 10:10:00 AM |
|
note crosspost from bminer: v. 12.1.0
both windows 7 and driver 417.35
1080ti 1 card rig: ~6 G/s
1080ti 4 card rig: ~3 G/s per card
any possible problem with the 4 card rig?, power and temps are down too in the 4 card rig..nothing power limit and clocks can do, increasing to 120 power limit will gain 0.2 G/s max. with occasional miner crash/restart.
with 391.35 on 4 card rig, no occasional miner crash/restart but still ~3 G/s per card
while bminer turns my 4 card rig to 3 G/s per 1080ti, this one..gminer 1.19 gives only 1.5 G/s per card found the issue, to run at 5.x G/s for 1080ti ---->max of 3 cards only for bminer..seems amount of cards is an issue.. Yes! The same problem! Win 7, Rig with 6 1080ti - 1.95 G/s per GPU , gminer only 0.9 G/s per card. Rig with 5 1080ti - ~ 2.6G/s per card. Driver 417.35(was try 411 also). |
|
|
|
|
avirdoz
Legendary
Offline
Activity: 1191
Merit: 1001
|
|
January 18, 2019, 03:36:08 PM |
|
note crosspost from bminer: v. 12.1.0
both windows 7 and driver 417.35
1080ti 1 card rig: ~6 G/s
1080ti 4 card rig: ~3 G/s per card
any possible problem with the 4 card rig?, power and temps are down too in the 4 card rig..nothing power limit and clocks can do, increasing to 120 power limit will gain 0.2 G/s max. with occasional miner crash/restart.
with 391.35 on 4 card rig, no occasional miner crash/restart but still ~3 G/s per card
while bminer turns my 4 card rig to 3 G/s per 1080ti, this one..gminer 1.19 gives only 1.5 G/s per card found the issue, to run at 5.x G/s for 1080ti ---->max of 3 cards only for bminer..seems amount of cards is an issue.. Yes! The same problem! Win 7, Rig with 6 1080ti - 1.95 G/s per GPU , gminer only 0.9 G/s per card. Rig with 5 1080ti - ~ 2.6G/s per card. Driver 417.35(was try 411 also). On win10 machine - h/r is ok, but on win7 I have two times lower h/r (for bminer and gminer). |
|
|
|
|
asumar
Newbie
Offline
Activity: 24
Merit: 0
|
|
January 18, 2019, 04:30:58 PM |
|
bminer has no issues, and it finds about 1 solution every 2 seconds. Needs a lot more optimisation it seems  . Come on, you can do it! I'd like to switch away from bminer. +1 I also have that opinion! |
|
|
|
|
joginvik1
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 18, 2019, 10:17:39 PM
Last edit: January 18, 2019, 10:35:18 PM by joginvik1 |
|
Need some help for green for f2pool.
1 of 1070 card not responding on green - on other algo all is good. rig 7 cards. 50 g virtual.
|
|
|
|
|
|
Dr_Victor
|
|
January 19, 2019, 06:35:55 AM |
|
Did anyone solve the problem with low speed for gtx 1080ti? I have one rig on 4+ and another 2.8 only. Win10, 417+ driver. Virtual memory is 70+
|
yobit.net is banned from signatures
|
|
|
|
|
kromsatell1
Newbie
Offline
Activity: 20
Merit: 0
|
|
January 19, 2019, 03:47:40 PM |
|
Hyжнa пoмoщь для зeлeнoгo для f2pool. oчeнь |
|
|
|
|
Zminer777 (OP)
Member
Offline
Activity: 488
Merit: 37
|
|
January 19, 2019, 03:53:35 PM |
|
Hyжнa пoмoщь для зeлeнoгo для f2pool. oчeнь
What's problem? ask your question in telegram. |
|
|
|
|
Howardroid
Newbie
Offline
Activity: 16
Merit: 0
|
|
January 19, 2019, 04:14:00 PM |
|
v1.19 take 21%+ CPU load for me, Thanks for update v1.20 ~10% CPU load now.
|
|
|
|
|
joenuno1
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 19, 2019, 04:58:00 PM |
|
Thanks for version 1.20. Cpu load has improved on my 8-card rig to 85% cpu load which is ok. But I get Memory Error on GPU and the miner fails after a minute or two. It's getting close for 8-card rigs. my smaller rigs do good with it. Hopefully the efficiency will increase soon. Bminer is still faster. Gminer is more consistant with all matching Gpu's mining at the same rate. I trust Gminer so much more than all the other miners. I always try the other ones to make sure I'm making the most coin and Gminer has remained the leader since it first came out. Thanks for the hard work!
|
|
|
|
|
|
