GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[DarkMoose]

When will Gminer be updated to support Grin mining at 1060 (6 GB) under Windows 10? Other miners can already do this.

[1713575554]

1713575554

[1713575554]

1713575554

[1713575554]

1713575554

[1713575554]

1713575554

[maryoush]

1080ti evga ftw3
this is what i've got at the moment - just started at nicehash

[INFO] [2019-02-14T12:35:38 01:00] Total 2.77 G/s Accepted shares 30 Rejected shares 2
[INFO] [2019-02-14T12:35:47 01:00] Received new job 1802124025585
[INFO] [2019-02-14T12:35:56 01:00] Accepted share
[INFO] [2019-02-14T12:36:02 01:00] Received new job 1802124025685
[INFO] [2019-02-14T12:36:06 01:00] Accepted share
[INFO] [2019-02-14T12:36:07 01:00] Received new job 1802124025820
[INFO] [2019-02-14T12:36:08 01:00] [GPU 0] Speed: 1.40 G/s Fidelity 0.877 Temp: 62C Fan: 40% Power: 191W 0.01 G/J
[INFO] [2019-02-14T12:36:08 01:00] [GPU 1] Speed: 1.41 G/s Fidelity 0.981 Temp: 54C Fan: 40% Power: 189W 0.01 G/J
[INFO] [2019-02-14T12:36:08 01:00] Total 2.80 G/s Accepted shares 32 Rejected shares 2
[INFO] [2019-02-14T12:36:09 01:00] Received new job 1802124025967
[INFO] [2019-02-14T12:36:19 01:00] Received new job 1802124026112

[grib69]

gminer 1.31
pool - nicehash
algo - equihash150_5
os - win10
drv - 418.81, 418.91

gtx 1080ti - all good
gtx 1070 - "illegal memory access was encountered" random card

[supervitek]

Hi guys,

I'm mining Beam and one of the cards is used for the system (Windows 8.1). Any idea how can I avoid windows freeze by setting single card intensity lower? Or is it any way to set total intensity lower?

Thank you!

[Zminer777]

GMiner v1.32 available for download

v1.32
+ improved performance for Grin29/Aeternity
+ added AMD support for Beam
+ --list_devices command to show available devices

Please use Windows 7 or Linux, because Windows 10 reserves a lot of memory.
On Windows 10, some algorithms may not run due to lack of memory or demonstrate worse performance, because the miner uses the implementation for less memory.

Performance on stock GPU settings:
Grin29(Cuckaroo29):
Palit GTX 1060 JetStream 6GB ~2.8 G/s
Palit GTX 1070 Ti JetStream 8GB ~4.8 G/s
MSI GTX 1080 SEA HAWK EK X 8GB ~5.0 G/s
Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~7.5 G/s
MSI RTX 2070 Armor 8GB ~6.7 G/s
MSI RTX 2080 DUKE 8GB ~8.0 G/s

Aeternity(Cuckoo29):
Palit GTX 1060 JetStream 6GB ~3.0 G/s
Palit GTX 1070 Ti JetStream 8GB ~5.1 G/s
MSI GTX 1080 SEA HAWK EK X 8GB ~5.4 G/s
Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~8.0 G/s
MSI RTX 2070 Armor 8GB ~7.3 G/s
MSI RTX 2080 DUKE 8GB ~8.5 G/s

Beam(Equihash150,5):
Sapphire VEGA 56 8GB ~18 Sol/s
PowerColor RX580 Red Devil 8GB ~12 Sol/s

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A
GitHub: https://github.com/develsoftware/GMinerRelease/releases

UPDATE: lastest update contains bug with fidelity, please don't use 1.32 for cuckoocycle algorithms, use 1.31 instead.

[cirlama]

1080ti: 7.6 G/S on grin29 win10 latest drivers, @+135 core +400 mem 75% power => quite good
1070: 4.5 G/S on grin29 win10 latest drivers, @+165 core +550 mem 75% power => quite good

RX480 (4 gb)  & RX580 (8 gb) on Beam win10 18.5.1 drivers, @1300 & 1350 core give 12 & 13 sol/s => similar to lolMiner 0.7
(but my bios are tweaked for eth)

(just for info: grin31 on 11 GB 1080 ti gives 0.05 G/S, I don't know why...)

[Dripac]

Because you dont read

On Windows 10, some algorithms may not run due to lack of memory or demonstrate worse performance, because the miner uses the implementation for less memory.

[Quake4]

+ added AMD support for Beam

Please, add  (-d) --devices AMD or --devices NVIDIA (without key (-d) --devices select to mine all supported devices)
To select proper devices.

[Zminer777]

Please, add  (-d) --devices AMD or --devices NVIDIA (without key (-d) --devices select to mine all supported devices)
To select proper devices.

Will do it in next update

[Juniormkl]

GMiner v1.32 (Windows/Linux) added to https://www.minermonitoring.com/



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[cirlama]

1080ti: 7.6 G/S on grin29 win10 latest drivers, @+135 core +400 mem 75% power => quite good
1070: 4.5 G/S on grin29 win10 latest drivers, @+165 core +550 mem 75% power => quite good

RX480 (4 gb)  & RX580 (8 gb) on Beam win10 18.5.1 drivers, @1300 & 1350 core give 12 & 13 sol/s => similar to lolMiner 0.7
(but my bios are tweaked for eth)

(just for info: grin31 on 11 GB 1080 ti gives 0.05 G/S, I don't know why...)

it seems much slower on grin pool side (tested on f2pool only, and it's not reject rate shown around 2% pool side)

[dafuzz_rsa]

glad its not just me

Posted in their telegram group but ive been reporting this for a while now and doesnt get noticed.

[mo35]

can we ever expect 5gb solvers ? to be able to run 1060 6gb on win10 , bminer did it and it works just fine , but would prefer to use yours.

[Mapuo]

it seems much slower on grin pool side (tested on f2pool only, and it's not reject rate shown around 2% pool side)

Same at nanopool. Fake hashrate, slower than 1.31 and lower wattage.

[Divinity666]

Doesn't work with AMD Fury cards...

Same at nanopool. Fake hashrate, slower than 1.31 and lower wattage.

I see higher wattage now, not sure yet about h\r at pool though

upd. ok, I can confirm h\r dropped at pool for me too, rolling back to 1.31

[jebidia]

Having trouble with this miner on Grin29 crashing my 1080 ti rigs after a little while...Seems any algo on this miner crashes my 2080ti's instantly...Using 80GB for Virtual memory and very conservative clocks...Thoughts?

[misterkit]

Miner is reporting slightly lower numbers than the leading competitor (at least for BEAM).

I do like the stats being displayed.  It has helped to reduce overall wattage.

It would be nice if bus ID and fan speed could be displayed in the stats.  I'm running Vegas.

I'll run this for awhile and compare with poolside results.

[SaiyanPrynz26]

Awesome thank you so much for the update to the miner. Appreciate much!!!

[jebidia]

Miner is reporting slightly lower numbers than the leading competitor.

I do like the stats being displayed.  It has helped to reduce overall wattage.

It would be nice if bus ID and fan speed could be displayed in the stats.  I'm running Vegas.

I'll run this for awhile and compare with poolside results.

Who is the leading competitor?

[misterkit]

I edited my post above... but I am mining BEAM on AMD.

The miner I was referring to is lolminer.