Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

[Wolf6270]

Hi guys! please tell me how to change the firmware on Dayun Zig Z1 remotely?

hi! I am glad to present you a new asic dayun zig z1 firmware with overclocking to 7.5-8 gigahesh! the cost of firmware for one device is $ 75, for two and more than $ 60 apiece. This price includes a flash drive with firmware, delivery to any part of our universe, and when Ilon Musk announces a flight to Mars, then delivery to Mars will be possible) the firmware is based on the official kernel from 09.30.18 with numerous modifications, replacement of the source code.
telegramm channel https://t.me/Dayun_zig_z1

[1714020867]

1714020867

[1714020867]

1714020867

[metnet]

https://www.nicehash.com/algorithm/lyra2re

this nicehash tool is very useful. it is available for all popular algos.
you can see and follow difficulty and paying changing.


https://www.nicehash.com/profitability-calculator

this one is the different than above. it is easy and fast to find your device earning.

nicehash earning raised to 0.0013 btc again

[VoskCoin]

what are you guys finding most profitable currently w/ this miner?

[Andartis]

what are you guys finding most profitable currently w/ this miner?

Probably nicehash, when you aim to get btc at the end...

[alex.asic]

what are you guys finding most profitable currently w/ this miner?

Probably nicehash, when you aim to get btc at the end...

Using the minerstat site blockmasters has consistently been the highest pool for the last few weeks. While sometimes individual coins will be higher.

[Keops09]

Hi guys! please tell me how to change the firmware on Dayun Zig Z1 remotely?

hi! I am glad to present you a new asic dayun zig z1 firmware with overclocking to 7.5-8 gigahesh! the cost of firmware for one device is $ 75, for two and more than $ 60 apiece. This price includes a flash drive with firmware, delivery to any part of our universe, and when Ilon Musk announces a flight to Mars, then delivery to Mars will be possible) the firmware is based on the official kernel from 09.30.18 with numerous modifications, replacement of the source code.
telegramm channel https://t.me/Dayun_zig_z1

can ı use on z1+?

[VoskCoin]

Just put together my own review on the Dayun Zig Z1+ miner if anyone is interested

https://www.youtube.com/watch?v=xnHpz_f2MR0

[Wolf6270]

Hi guys! please tell me how to change the firmware on Dayun Zig Z1 remotely?

hi! I am glad to present you a new asic dayun zig z1 firmware with overclocking to 7.5-8 gigahesh! the cost of firmware for one device is $ 75, for two and more than $ 60 apiece. This price includes a flash drive with firmware, delivery to any part of our universe, and when Ilon Musk announces a flight to Mars, then delivery to Mars will be possible) the firmware is based on the official kernel from 09.30.18 with numerous modifications, replacement of the source code.
telegramm channel https://t.me/Dayun_zig_z1

can ı use on z1+?

Yes, there is a firmware and on z1 + but so far it is damp) join our telegram channel) t.me/Dayunzigz1

[btc2017btc2017]

Did anyone find a solution is reducing the fan speed?

[Keops09]

Zig Z series of miners in the deplorable state is obvious. The correct coin boilers in the first areas have probably saved the money but the later fields like us are now crawling. In this case, the new method of party mining can help us save money. If you're currently mining, you mining either solo or shared. it is hard to capture profitability with low hash power as a solo. Here comes party mining. So you like to mining solo, but this time you're just mining together not with yourself but with the participants. Your hash power is the sum of the hash powers of the participants. also distributes the block awards in the rate of hash power of the pool participants. Isn't it quite fair? Maybe that's how we can save our money. If you want to join the party settings are below.

*this invitation is not only zig miners. if you mining in lyra2rev2 on zergpool, you are invited.*

*come to join us our party...*

Settings:
if you use BTC wallet
pool url ........: stratum+tcp://lyra2v2.mine.zergpool.com:4533
pool username ...: <BTC wallet>.<machine name>
pool password ...: c=BTC,mc=MONA,m=party.56N3e1Lg28698,d=512

if you use MONA wallet
pool url ........: stratum+tcp://lyra2v2.mine.zergpool.com:4533
pool username ...: <XVG wallet >.<machine name>
pool password ...: c=MONA,mc=MONA,m=party.56N3e1Lg28698,d=512

if any question ; https://t.me/Partymining 

*note ; we are mining MONA but . it will be changed according to our profitability and strength in the future.

[Andartis]

I am getting tons of rejects at the miner dashboards and a low hashrate on nicehash. it fluctuates and persists on any server. some times it is normal. Any ideas how to solve this? Reboot etc. did not help.

[lennujuht]

I am getting tons of rejects at the miner dashboards and a low hashrate on nicehash. it fluctuates and persists on any server. some times it is normal. Any ideas how to solve this? Reboot etc. did not help.

many pool like "block master" rejects in average 40%, others like nicehash  do not show rejects, so just keep trying other pools. I am using sergpool

[Andartis]

I am getting tons of rejects at the miner dashboards and a low hashrate on nicehash. it fluctuates and persists on any server. some times it is normal. Any ideas how to solve this? Reboot etc. did not help.

many pool like "block master" rejects in average 40%, others like nicehash  do not show rejects, so just keep trying other pools. I am using sergpool

Nicehash worked great so far. The rejecrs are show  in the miner, not on nicehash. Nicehash just reports low hashrate ..

[Pangolinripoff]

Hi guys! please tell me how to change the firmware on Dayun Zig Z1 remotely?

hi! I am glad to present you a new asic dayun zig z1 firmware with overclocking to 7.5-8 gigahesh! the cost of firmware for one device is $ 75, for two and more than $ 60 apiece. This price includes a flash drive with firmware, delivery to any part of our universe, and when Ilon Musk announces a flight to Mars, then delivery to Mars will be possible) the firmware is based on the official kernel from 09.30.18 with numerous modifications, replacement of the source code.
telegramm channel https://t.me/Dayun_zig_z1

So let me get this straight. At approx $1 a day profit, you want me to give up 75 days of profit to take a flyer on some random guys coding skills?

[Pangolinripoff]

Hey guys. I have read all the posts here. Yes all 50+ pages and cannot find a way to stabilize my miners. I have had them since before the HDAC bomb and they have always jumped between 0 and some high hashrate - sometimes over 20. This often occurs with one board hashing very high while the others sit idle. This is the first miner Ive had that doesn't use all the boards at one time, and the only one that acutally has boards sitting idle. Ive read some posts where people claim their hashrate stablizes into nearly a flat line but I have not been able to replicate this. My Z!+ are all averaging far less than the advertized 7.2 while spiking to insane speeds at times. Is there anywhere someone can point me to for info on how to solve this?

Edit - Also, is there any difference between the Z1 and Z1+ firmware? Both files are exactly the same size...

[Phuripat]

Hey guys. I have read all the posts here. Yes all 50+ pages and cannot find a way to stabilize my miners. I have had them since before the HDAC bomb and they have always jumped between 0 and some high hashrate - sometimes over 20. This often occurs with one board hashing very high while the others sit idle. This is the first miner Ive had that doesn't use all the boards at one time, and the only one that acutally has boards sitting idle. Ive read some posts where people claim their hashrate stablizes into nearly a flat line but I have not been able to replicate this. My Z!+ are all averaging far less than the advertized 7.2 while spiking to insane speeds at times. Is there anywhere someone can point me to for info on how to solve this?

Edit - Also, is there any difference between the Z1 and Z1+ firmware? Both files are exactly the same size...

my miner is stabilized. I use last firmware ZigZ1 spec is 6.8 but actully is stable at 6.3-6.4

https://uppic.cc/d/KiZL

[Pangolinripoff]

I have 4 Z1+ from the same batch and they all do basically the same thing. I am running the latest firmware for them but they exhibit the same behavior no matter what firmware I use. https://imgur.com/pif1YCu. I have all but given up hope of them becoming anywhere near stable. I have them set at auto freq at 1000 but the behavior is the same at all the permutations, i.e factory settings, auto freq on and off, various frequencies from 800 to 1100. Any help would be appreciated.

[Andartis]

I am getting tons of rejects at the miner dashboards and a low hashrate on nicehash. it fluctuates and persists on any server. some times it is normal. Any ideas how to solve this? Reboot etc. did not help.

many pool like "block master" rejects in average 40%, others like nicehash  do not show rejects, so just keep trying other pools. I am using sergpool

Nicehash worked great so far. The rejecrs are show  in the miner, not on nicehash. Nicehash just reports low hashrate ..

I replaced the USB stick with another. It seems the one it came with became defective and really slow. Problem solved.

[Andartis]

Is there a way to prevent the miner from destroying the flash memory of the usb sticks? I guess it writes permanently some logs on the stick and degrades the memory over time.

[Pangolinripoff]

Are there no mods here to get rid of the guy advertizing?