[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[kerney666]

Hi Guys
Im mining Graft and Massary with this miner but its not accepting shares it only shows the hashrate and my GPU is working but no shares are accepted.
i dont have this problem with XMR i have this problem with Grafts algo and massary algo.
Anyone have same problem ?

Hmm that is odd. Can you show your command line and some stats output? Does the miner find shares but the pool is rejecting them? Or no shares found at all?

[ggarbi]

finding shares but there is no (green share accepted line) and my pool (cryptoKnight) not showing any hashrate in it.
This is my command line

teamredminer.exe -a cnv8_rwz -o stratum+tcp://graft.ingest.cryptoknight.cc:9112 -u MyIntegratedWalletFromTradeOgre.WorkerName -p x

[Sadopwnz]

Dev pool connection was closed due to an error

how can i solve it?

[jazz1984]

Hi what driver is best for win7 RX550/2 for cryptonight?

I'll have to hope that someone in the general audience can give you a hint here, we have done zero testing on win 7 unfortunately.

So it must be win 10 or linux for better result? For linux, as i understand, it must be rocm or gpupro, and for win 10 what driver best?

Try latest 19.3.2. I use it for RX 580. Speed is good.

Hi what driver is best for win7 RX550/2 for cryptonight?

I'll have to hope that someone in the general audience can give you a hint here, we have done zero testing on win 7 unfortunately.

So it must be win 10 or linux for better result? For linux, as i understand, it must be rocm or gpupro, and for win 10 what driver best?

Try latest 19.3.2. I use it for RX 580. Speed is good.

Ok, ill report here when chek that.
Thank you for reply.

[kristikun]

Hello im trying to get running Sapphire Nitro radeon rx 470  8gb , when i flash pimped bios from Pimp My Straps in SRB Polaris Bios Editor Or polarisbios editor , the Gpu shows with error and miner or  overdrive software  doesnt even notice the GPU in devices i get errror code 43...  when i try custom modded bioses i get  Subsystem Id errors.... just what should flash so it would work

[kerney666]

finding shares but there is no (green share accepted line) and my pool (cryptoKnight) not showing any hashrate in it.
This is my command line

teamredminer.exe -a cnv8_rwz -o stratum+tcp://graft.ingest.cryptoknight.cc:9112 -u MyIntegratedWalletFromTradeOgre.WorkerName -p x

Well, there's nothing wrong with that command line, and it works fine for me. I assume you're using a real wallet though . You are choosing to use the diff 200k port. If your hashrate is small it will be a while between shares. Can you try port 9111 to make sure?

[P00P135]

Hello im trying to get running Sapphire Nitro radeon rx 470  8gb , when i flash pimped bios from Pimp My Straps in SRB Polaris Bios Editor Or polarisbios editor , the Gpu shows with error and miner or  overdrive software  doesnt even notice the GPU in devices i get errror code 43...  when i try custom modded bioses i get  Subsystem Id errors.... just what should flash so it would work

You need to run pixel patch after you modify the BIOS in windows.

[bigassboy]

finding shares but there is no (green share accepted line) and my pool (cryptoKnight) not showing any hashrate in it.
This is my command line

teamredminer.exe -a cnv8_rwz -o stratum+tcp://graft.ingest.cryptoknight.cc:9112 -u MyIntegratedWalletFromTradeOgre.WorkerName -p x

Move WorkerName to the password field. It should submit shares after that

[jazz1984]

Ok, i run my rx550/2 on win 10. Without flashing bios i got 370 from card - memory 1950 in Afterburner, core 1190 in stock, cn_config L3+3. So to obtain more hashes i need to flash straps i think? or can use some softmod like AB?
Update: 600 accepted/ 22 rejected shares its normal?

[ggarbi]

Hey folks
 Do you have any recommendation for Vega 64 Drivers for this miner ?
should if stay on 18.6.1 ? or should change it to newer one ?
If yes please tell me whats is the best. tnx a lot dear community !

[ggarbi]

finding shares but there is no (green share accepted line) and my pool (cryptoKnight) not showing any hashrate in it.
This is my command line

teamredminer.exe -a cnv8_rwz -o stratum+tcp://graft.ingest.cryptoknight.cc:9112 -u MyIntegratedWalletFromTradeOgre.WorkerName -p x

Move WorkerName to the password field. It should submit shares after that

This Worked !
Thank you very much
i removed my WorkerName form end of my wallet address and it worked.
Really well done creating this miner its really working grate

[kerney666]

Ok, i run my rx550/2 on win 10. Without flashing bios i got 370 from card - memory 1950 in Afterburner, core 1190 in stock, cn_config L3+3. So to obtain more hashes i need to flash straps i think? or can use some softmod like AB?

Hi, I've been dodging this a little since I'm no expert in the 550s. I do know we have 550 farms (mostly lexa pros) running 500-550 h/s after proper tuning. So, your stock mem straps seems like sh*t to be honest, you def need better straps .

[pbfarmer]

Hey folks
 Do you have any recommendation for Vega 64 Drivers for this miner ?
should if stay on 18.6.1 ? or should change it to newer one ?
If yes please tell me whats is the best. tnx a lot dear community !

I never saw any reason to stick w/ 18.6.1 w/ TRM - that was a wolf0/xmr-stak/variant requirement.  I always updated drivers when released with no issues, and the last I used (before moving to linux) was the latest 18.x.  19.x should be fine tho - only reason I couldn't use it when it first came out because ODNT wasn't caught up yet.

That being said, I don't think you're going to see any real improvement on newer drivers, so unless you have some other reason to upgrade, it may not be worth it.

[dragonmike]

What could potentially give you more hashrate, however, is this:

https://bitcointalk.org/index.php?topic=5123724.0

Fresh from the eliovp factory!

Shame all my Vegas are on Win10 currently. I'd like to know how much these could gain from tuned straps on XMR...

[mindstorms54]

What could potentially give you more hashrate, however, is this:

https://bitcointalk.org/index.php?topic=5123724.0

Fresh from the eliovp factory!

Shame all my Vegas are on Win10 currently. I'd like to know how much these could gain from tuned straps on XMR...

Have you tested how much gain can this do?
If I'm understanding right, isn't the hashrate lower on cn algo compared to win10?

[pbfarmer]

What could potentially give you more hashrate, however, is this:

https://bitcointalk.org/index.php?topic=5123724.0

Fresh from the eliovp factory!

Shame all my Vegas are on Win10 currently. I'd like to know how much these could gain from tuned straps on XMR...

Fun!  Just when I thought i was getting away from the tinkering - another major timesink

EDIT: Btw, between TRM, Phoenix, GrinPro/kbminer all being available (w/ competitive h/rs) on linux, not much reason for putting up w/ Windows nonsense anymore afaic.  Main thing missing now is CN-heavy/haven/saber/waltz (which I use JCE for) but hopefully kerney666 & todxx will free us soon.

I have a big ol 'manual' for a 30 min ubuntu mining rig setup.  Guess I should try to get that online somewhere.

[Iamtutut]

DEVS, there is a memory pill for AMD

Could you implement it on windows ? Right now it's linux only.

See here: https://bitcointalk.org/index.php?topic=5123724.0

[ku4eto]

DEVS, there is a memory pill for AMD

Could you implement it on windows ? Right now it's linux only.

See here: https://bitcointalk.org/index.php?topic=5123724.0

Please, do not call it a Memory Pill.

Or pill at all.

This has nothing to do with OGAC/OGAG. OGAG mentioned, they are working on Vega Pill, but DO NOT GIVE HER CREDIT for this. She does not deserve it.

Also, why would they implement 3rd party software, that currently works only on Linux, since its not ported?

[scryptr]

DEVS, there is a memory pill for AMD

Could you implement it on windows ? Right now it's linux only.

See here: https://bitcointalk.org/index.php?topic=5123724.0

Please, do not call it a Memory Pill.

Or pill at all.

This has nothing to do with OGAC/OGAG. OGAG mentioned, they are working on Vega Pill, but DO NOT GIVE HER CREDIT for this. She does not deserve it.

Also, why would they implement 3rd party software, that currently works only on Linux, since its not ported?

THE CODE IS STRAIGHT C++ --

Someone has it running on Windows already; check the thread that Iamtutut is referencing.  And, I agree that it is not a "pill", because it is a very basic application.  The AMD memory can be tweaked, but the user needs to understand how to adjust the memory code on his own.

Hopefully an experienced programmer will further develop the application.       --scryptr

[neuromancer4867]

Sup? I have a fair amount of R9 cards (Fury) and have a question and a statement.

Question: Has anyone gotten TeamRedMiner to work on R9 cards? (AMD) and specifically R9 Fury?
Statement: If not, I am willing to sponsor development for an implementation/development (Feel free to give me a ballpark idea of $$/BTCBTC)

Feel free to PM me. This is an alt-account since I don't feel super comfortable with my main account here since the many database hacks and doxxing etc. I can verify ownership of my mining farm etc. and if needed pay for part of development up-front if developer is a community known or whatever is needed. If it matters I intend to run the miner under EthOS mainly for Monero (new cryptonite algo). If you are in the U.S and need it I can supply development hardware rig with relevant hardware to serious developer (3x Sapphire Nitro Fury 4GB HBM, Micro-ATX, 8GB, SSD, Celeron in metal frame).