commandera
Member
 Offline
Activity: 243
Merit: 71
|
 |
February 06, 2021, 11:44:28 AM |
|
TRM hiveOS flight sheet for ETH+ZIL
any Extra config arguments ?
|
|
|
|
|
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, but full nodes are more resource-heavy, and they must do a lengthy initial syncing process. As a result, lightweight clients with somewhat less security are commonly used.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
|
th00ber
|
|
February 06, 2021, 01:46:04 PM |
|
i got it.
the vega runs with 54 mh/s at 1100 on core and 1028 on mem with 850 mv on both.
tweak timings cl 20 ras 26 rcdrc 12 rcdwr 12 rc 38 rp 12 rrds 3 rrdl 5 rtp 6 faw 12 cwl 8 wtrs 4 wtrl 9 wr 13 ref 15600 rfc 239
is there better settings with the new trm v8.0?
i run it on windows, with 4 vega 56 power coler at 48 mh and 1 vega 56 phantom on 51mhs (morpheus cooler) mem temp set on 62
i've i try to overclock in hive i got many errors with powerplay table.
What do i wrong?
Is there an hashrate increase of switching to hive? when it runs?
thx
50+ MH/s is already good for Vega 56 I'm in HiveOS and my settings are : SAMSUNG MEM CHIPS --ras 26 --rcdrd 13 --rcdwr 12 --rc 38 --rp 12 --rrds 3 --rrdl 5 --rtp 6 --faw 12 -- cwl 8 --wtrs 4 --wtrl 9 --wr 13 --ref 24000 --rfc 239 HYNIX MEM CHIPS --cl 18 --ras 23 --rcdrd 13 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 17000 Then I find the lowest power consumption settings to stay in the 50.xx range per card (If I don't mind the power, I can run stable 51-52.xx per card) This way I can hash with the whole rig at 352 MH/s for 1145W at wall (with Platinium PSU and H110 MB + 4Go DDR4 + G4400 + SSD + 8 case fans) https://imgur.com/a/ik95H8I And for your information TRM 0.7.2 is more stable with aggresive OC and timing than TRM 0.8.0 but it consume more power. After some tweaking to find the good clock and voltage per card, I'm really happy with TRM 0.8.0 |
|
|
|
|
waywoos
Jr. Member
Offline
Activity: 124
Merit: 2
|
|
February 06, 2021, 03:32:51 PM |
|
new to this. is there an way to enter your config like in phoenix. telling what values you want your clocks and such to be?
i have a modded 5700xt i want to try.
|
|
|
|
|
|
Dr_Victor
|
|
February 06, 2021, 04:02:56 PM |
|
Beware! Scam and virus^
|
yobit.net is banned from signatures
|
|
|
|
pamungkas
|
|
February 06, 2021, 04:07:43 PM |
|
Beware! Scam and virus^
this is my project and i have source code. You can also check files on virusstotal |
|
|
|
|
|
PeaMine
|
|
February 06, 2021, 05:59:16 PM |
|
Looks like 0.8.1 was released on the github 3 days ago, anyone play around with it yet?
How did it go?
|
Datacenter Technician and Electrician. If you have any questions feel free to ask me as I am generally bored looking at logs and happy to help during free time.
|
|
|
|
baga105
|
|
February 06, 2021, 06:13:30 PM |
|
Can someone confirm Hashrate of Rx 5700XTs? 68 mh/s??
|
Ass, Gas or Grass! No one rides for free!
|
|
|
|
malyan
|
|
February 06, 2021, 06:22:12 PM |
|
Can someone confirm Hashrate of Rx 5700XTs? 68 mh/s??
I got around 67-69 mh/s, I'll put it to work for a day |
((^_^))
|
|
|
|
baga105
|
|
February 06, 2021, 06:25:06 PM |
|
Can someone confirm Hashrate of Rx 5700XTs? 68 mh/s??
I got around 67-69 mh/s, I'll put it to work for a day With this miner? Are you mining on Win10 or Linux? Are you willing to mod a bios for me? |
Ass, Gas or Grass! No one rides for free!
|
|
|
waywoos
Jr. Member
Offline
Activity: 124
Merit: 2
|
|
February 06, 2021, 09:04:56 PM |
|
its a scam
|
|
|
|
|
N2DCRYPT
Jr. Member
Offline
Activity: 148
Merit: 5
|
|
February 06, 2021, 09:11:53 PM |
|
Looks like 0.8.1 was released on the github 3 days ago, anyone play around with it yet?
How did it go?
0.8.1 release was for basic support for rx 6000 cards. I have a 6900xt that's run on the new release quite stably for the last several days, just under 64 MH/s for 130W. |
|
|
|
|
zzzzxxxxzzzz
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 07, 2021, 03:46:13 AM |
|
I'm in HiveOS and my settings are : SAMSUNG MEM CHIPS --ras 26 --rcdrd 13 --rcdwr 12 --rc 38 --rp 12 --rrds 3 --rrdl 5 --rtp 6 --faw 12 -- cwl 8 --wtrs 4 --wtrl 9 --wr 13 --ref 24000 --rfc 239 HYNIX MEM CHIPS --cl 18 --ras 23 --rcdrd 13 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 17000 Hey what kind of black magic is it?  I want to know how to use it, I'm only using oc in hiveon that is available, standard clocks with bios moded cards. and how much are taking case fans? |
|
|
|
|
|
Dr_Victor
|
|
February 07, 2021, 05:56:19 AM |
|
Beware! Scam and virus^
this is my project and i have source code. You can also check files on virusstotal Give us proof instead of advertising. |
yobit.net is banned from signatures
|
|
|
scryptr
Legendary
Offline
Activity: 1793
Merit: 1028
|
|
February 07, 2021, 11:32:55 AM |
|
Beware! Scam and virus^
this is my project and i have source code. You can also check files on virusstotal Give us proof instead of advertising. THE ORIGINAL POST HAS BEEN DELETED-- And there have been constant scam posts offering fake, "improved" software that contains malware. Some of the packages have been offered on GitHub. Don't trust a "last post" from an unfamiliar user. --scryptr |
|
|
|
|
th00ber
|
|
February 07, 2021, 12:21:20 PM |
|
I'm in HiveOS and my settings are : SAMSUNG MEM CHIPS --ras 26 --rcdrd 13 --rcdwr 12 --rc 38 --rp 12 --rrds 3 --rrdl 5 --rtp 6 --faw 12 -- cwl 8 --wtrs 4 --wtrl 9 --wr 13 --ref 24000 --rfc 239 HYNIX MEM CHIPS --cl 18 --ras 23 --rcdrd 13 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 17000 Hey what kind of black magic is it? I want to know how to use it, I'm only using oc in hiveon that is available, standard clocks with bios moded cards. and how much are taking case fans? Basically, modded BIOS will just hard code the memory timing, frequency and voltage to apply. But you also can apply them on the fly with OC and amdmemtweak. So my Vega are stock BIOS in case of resale, it's fine. The easiest way on HiveOS to pass a command is on your worker in the top menu, use the "Run Command" (on the left of the Rocket Ship) Then ... type your command https://imgur.com/a/Q2hGCV4But because it's on the fly ... in case of reboot, you have to execute the command again. So to be sure that the command is passed when I start the miner, I just customize /hive/bin/miner script to add my amdmemtweak before it start. It's works great |
|
|
|
|
christiano88
Member
Offline
Activity: 161
Merit: 10
|
|
February 07, 2021, 01:53:48 PM
Last edit: February 07, 2021, 03:55:23 PM by christiano88 |
|
Above post is probably a scam, the numbers are waaay off. SO, BEWARE!
|
|
|
|
|
|
th00ber
|
|
February 07, 2021, 07:19:53 PM |
|
Above post is probably a scam, the numbers are waaay off. SO, BEWARE!
+1 The account was a guy with last post in 2017. Probably a hacked account |
|
|
|
|
|
Blisk
|
|
February 08, 2021, 10:25:37 AM |
|
Can someone help me with this.
I still mine on 4Gb GPUs and when I set --eth_epoch=374 to test I get about 10 MH/s
When I remove that and start to mine I get only 1.3 MH/s.
Why is that?
|
|
|
|
nbminer
Newbie
Offline
Activity: 29
Merit: 0
|
|
February 08, 2021, 10:51:35 AM |
|
Can someone help me with this.
I still mine on 4Gb GPUs and when I set --eth_epoch=374 to test I get about 10 MH/s
When I remove that and start to mine I get only 1.3 MH/s.
Why is that?
With 4gb cards you would be better off using lolminer v1.22 as they give a hashrate of about 26 mh/s. |
|
|
|
|
FloppyPurpleGherkin
Jr. Member
Offline
Activity: 306
Merit: 2
|
|
February 08, 2021, 12:57:08 PM |
|
Can someone help me with this.
I still mine on 4Gb GPUs and when I set --eth_epoch=374 to test I get about 10 MH/s
When I remove that and start to mine I get only 1.3 MH/s.
Why is that?
With 4gb cards you would be better off using lolminer v1.22 as they give a hashrate of about 26 mh/s. 26-28mh with the card in the x16 slot (not using a riser) if using a riser.. It will be 14-16mh currently. |
|
|
|
|
|
