[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[Dowper_]

Polaris GPUs are finally on profit:
6x RX 580 4GB - AI Power Grid on Profit with TRM - https://www.youtube.com/watch?v=Ep3ntppV3RA

[zsoca72]

With Phoenixminer I can mine coins with over 4GB Dag.

Please.. Any idea???

Drivers!
If you have old drivers, then update them. I noticed this problem with AMD video cards, when they gave such an error with the amount of information exceeding 4 GB, which needs to be used for the DAG file.

You are right. After my post, I tried to mine ETHW with TRM, which had about 6GB DAG, and it worked fine. I see at DAG generation "dual buffer mode":
GPU 0 Running kernels in dual buffer mode.
GPU 0 Starting DAG generation for epoch 618, 5.83 GB (dual buffer mode).

Kawpow algo run in "single buffer mode". I found command "--eth_dag_buf" to force buffer mode to Dual, but looks like it doesnt work under kawpow algo.

In usage.txt file I found, that older drivers not supported single buffer mode over 4GB. Unfortunately I really use very old driver (19.12.1), because all my cards works perfectly with it.
When I upgraded it to ANY newer, I had always some problems.

Can I somehow forced this Dual buffer mode on Kawpow algo??

[fenomenyaa]

Latest update 5-6months ago, hope that it's not dead project 

[safar1980]

Latest update 5-6months ago, hope that it's not dead project 

No. TeamRedMiner is a very good and stable miner for AMD video cards. The developer has not released updates for new coins for almost 6 months, although the hashrate on the supported algorithms is no worse than on miners from other developers.

[waywoos2]

He still interacts on his official discord. 

[waywoos2]

he just released a new version for small fix. from his comments it seems he might become more active again

[fenomenyaa]

he just released a new version for small fix. from his comments it seems he might become more active again

nice to hear that,Hope they add heavyhash variants and at least kawpow support for RDNA3 cards.

[fmz89]

its been a while not mining almost 1,5 year. buckle up some rigs. and get ready after upcoming correction to be expected
4 year cycle only 2year in profit mode. i'm not expecting to be good for amd card these day

[FP91G]

Latest update 5-6months ago, hope that it's not dead project  

No. TeamRedMiner is a very good and stable miner for AMD video cards. The developer has not released updates for new coins for almost 6 months, although the hashrate on the supported algorithms is no worse than on miners from other developers.

Team Red Miner v0.10.16


Chipping away at the backlog by adding three new algos (karlsen, pyrin, abel) and RDNA3 kawpow support. We're aware of planned algo changes and will likely follow forks. Abel has R-mode support. We don't expect this version of kawpow on RDNA3 to run well on display gpus without throttling with a manual --prog_config setting.

README highlights:

GPU: Added support for karlsen.
GPU: Added support for pyrin.
GPU: Added support for abel (R-mode supported, stats support on pools included).
GPU: Added kawpow support for RDNA3 GPUs.
FPGA: Fixed bug with ironfish on JC13.

https://github.com/todxx/teamredminer/releases/tag/v0.10.16

Check all links with this post from the developer.

[sxemini]

i waited long for this trm update. Glad it is here now. I had some fear that TRM leaving the space, because the guys do also stuff for industrial mining for big companies.

[FP91G]

Team Red Miner v0.10.17

Follow-up release enabling dual mining for abel as primary algo (in general) and karlsen/pyrin as dual algo. Also fixed various small issues in v0.10.16.

README highlights:

GPU: Added support for dual mining abel and kaspa/ironfish/karlsen/pyrin (and triple with zil).
GPU: Fixed pyrin invalid/dup shares on large gpus running high hashrates.
GPU: Moved dual zil session to R-mode as the default choice when mined together with ethash or abel.
GPU: Fixed some failed allocations for abel+zil.
GPU: Fixed abel dag allocation in R-mode on 6GB gpus like the 5600XT. It will run for a while longer.

https://github.com/todxx/teamredminer/releases/tag/v0.10.17

Check all links with this post from the developer.

[FP91G]

Team Red Miner v0.10.18

Dusting off TON/GRAM mining, and a lots of other small fixes.

README highlights:

GPU: Added TON/GRAM for RDNA3 gpus.
GPU: Fixed TON/GRAM dual mining with abel and autolykos2.
GPU: Fixed broken kawpow on RDNA3 gpus.
GPU: Fixed loading Radeon VII kernels in general on newer drivers.
GPU: Fixed broken abel+ironfish dual mining.
GPU: Fixed old bug for ironfish mining on pools like Kryptex using email as wallet/username.
GPU: Fixed broken power read for some gpus on newer linux drivers.
GPU: Fixed broken kawpow mining on vultaic.
GPU: Patched broken job messages for new TON/GRAM pools.
GPU: Added --debug logging of network traffic for out-of-band stats for ABEL pools.

https://github.com/todxx/teamredminer/releases/tag/v0.10.18
Check all links with this post from the developer.

[fenomenyaa]

Radeon VII still problems with newer drivers,older drivers like 22.4.1 running without problem.

[igotek]

I didnt understand properly. How to use it ?
For example: ABEL + GRAM dual mining.
I can do dual mining. but I need to know intensity setting properly.
Someone explain it please ?

Code:

teamredminer
intensity: 100:1:0
The dual mining tuner needs scoring weights for how much 1 MH/s of the primary and dual algo are worth. There are defaults built into the miner that were valid when each algo was implemented and added, but as network hashrates and market prices move, new values may need to be provided. This argument provides three values X:Y:Z all expected to be positive numbers

X  Score for 1 MH/s of the primary algo (typically ethash).

Y  Score for 1 MH/s of the secondary algo (typically TON).

Z  Cost per 1 W of measured power. We recommend setting this to zero for now.

For example ETH+TON:

100:1:0 
+
  - based on manual relat-ive value: each MH/s of ETH is worth 100 MH/s of TON

[FP91G]

Team Red Miner v0.10.19

This release adds support for mining Alephium for both GPUs and FPGAs.
GPU support includes support for dual/triple mining with memory hard algos/zil, check example scripts for details.
FPGA support is limited to vu33p/vu35p boards for this release. Vu9p and vu13p boards will be added in a future release.

NOTE: Due to the extraordinary amount of effort it takes to develop bitstreams and the decreasing competitiveness of current FPGAs compared to modern GPUs, we will be pausing FPGA development for the foreseeable future.

README highlights:

GPU: Added support for alephium for all gpus, including dual mining using --alph .. --alph_end.
FPGA: Added support for alephium for most common FPGAs (vu33p and vu35p variants).

https://github.com/todxx/teamredminer/releases/tag/v0.10.19

Check all links with this post from the developer.

[energy_xxx]

Team Red Miner v0.10.21


Team Red Miner v0.10.21

This release adds support for the fishhash algo, incl A/B/C/R-mode like for TRM ethash. This first release only supports Vega family, Navi10, and Navi20 gpus. Polaris and RDNA3 will be added in a subsequent release, as well as support for dual mining.

README highlights:

GPU: Added fishhash support for Vega family, Navi10 and Navi20 (use -a fishhash).


https://github.com/todxx/teamredminer/releases/tag/v0.10.21

[fenomenyaa]

Hi dev,

Very soon, Xelis hash change algorithm to xelishashv2 (it's based on old cryptonight) will you add support to xelishashv2 for all AMD cards?

[fenomenyaa]

Long tinme have been passed since last update.Any update plans for progpow variants like quai,zano etc.., or newer algos ?

[fenomenyaa]

It seems like it's a dead project now.Last update a year ago, I've written several times, but we haven't received any updates or responses. There's no support for the new generation of AMD cards, and the new or variant mining algorithms are also not supported. It used to be the best mining software for AMD—such a shame.

[..XyZ..]

It seems like it's a dead project now.Last update a year ago, I've written several times, but we haven't received any updates or responses. There's no support for the new generation of AMD cards, and the new or variant mining algorithms are also not supported. It used to be the best mining software for AMD—such a shame.

SRBMiner still alive and supports RX 9xxx