jstefanop (OP)
Legendary
Offline
Activity: 2156
Merit: 1400
|
|
July 30, 2019, 05:44:29 PM |
|
I recd my new PSU - thanks! But, I notice it only has one output plug whereas the Apollo has two plug receptacles. My off-the-shelf PSU had a cable with an extra head on the end and that worked fine. How should I plug in the new PSU to the Apollo unit?
Just plug it into the right port. Remember to never plug another PSU/PSU cable into the spare port, this will either blow up one of the PSUs or cause a fire. What? your only supposed to plug in ONE PSU cable? the quick start guide says to "Plug in both 6 Pin PCIE power cables from your ATX or server power supply" never mind I think I miss read that... Yes thats for ATX power supplies. We designed our PSU to run with one cable because it has thicker wires, some ATX supplies come with really thin wires which can overheat them.
|
|
|
|
jchotz
Newbie
Offline
Activity: 6
Merit: 0
|
|
July 30, 2019, 10:27:46 PM |
|
I recd my new PSU - thanks! But, I notice it only has one output plug whereas the Apollo has two plug receptacles. My off-the-shelf PSU had a cable with an extra head on the end and that worked fine. How should I plug in the new PSU to the Apollo unit?
Just plug it into the right port. Remember to never plug another PSU/PSU cable into the spare port, this will either blow up one of the PSUs or cause a fire. Thanks! That worked. For clarity the "right" port is as viewed from the back. Maybe better noted as the VGA power port nearest the edge of the box?
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2156
Merit: 1400
|
|
July 30, 2019, 10:47:58 PM |
|
I recd my new PSU - thanks! But, I notice it only has one output plug whereas the Apollo has two plug receptacles. My off-the-shelf PSU had a cable with an extra head on the end and that worked fine. How should I plug in the new PSU to the Apollo unit?
Just plug it into the right port. Remember to never plug another PSU/PSU cable into the spare port, this will either blow up one of the PSUs or cause a fire. Thanks! That worked. For clarity the "right" port is as viewed from the back. Maybe better noted as the VGA power port nearest the edge of the box? Yea were working on "official" support docs that will have all this stuff clarified. Its does not really matter which, they are both electricaly connected the same, the right one is just closer to the mosfets.
|
|
|
|
TopMiningMiner
Newbie
Offline
Activity: 20
Merit: 0
|
|
July 31, 2019, 06:05:13 PM |
|
Has anyone who ordered an Apollo+PSU on/after the middle of June gotten their shipping notification yet?
|
|
|
|
Harbingold
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 31, 2019, 08:49:22 PM |
|
my miner is acting funny. not mining. started from scratch, new sd card, new image, new etch. it loads up, see it on the dashboard, starts mining then goes offline within 10 seconds starts back up. repeat. repeat. this pops up. Error: ECONNREFUSED 127.0.0.1:4020 thoughts?
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
July 31, 2019, 09:02:53 PM |
|
my miner is acting funny. not mining. started from scratch, new sd card, new image, new etch. it loads up, see it on the dashboard, starts mining then goes offline within 10 seconds starts back up. repeat. repeat. this pops up. Error: ECONNREFUSED 127.0.0.1:4020 thoughts?
It's an error in your pool setup. Are you trying to use a switching pool? If so, disable the donation pool. If not, double check your pool setup. Maybe....
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2156
Merit: 1400
|
|
August 01, 2019, 09:52:18 AM |
|
my miner is acting funny. not mining. started from scratch, new sd card, new image, new etch. it loads up, see it on the dashboard, starts mining then goes offline within 10 seconds starts back up. repeat. repeat. this pops up. Error: ECONNREFUSED 127.0.0.1:4020 thoughts?
Do you see a Red LED when it does this?
|
|
|
|
mickeykool
Newbie
Offline
Activity: 40
Merit: 0
|
|
August 01, 2019, 02:14:58 PM |
|
I received the PSU the other day and went to check on it after a few days of being used. The PSU is warm which is normal but the cable from PSU to the miner is warm too. i would say just 1/4 of length from PSU to miner is warm. I'm not sure if the cable is supposed to be warm?
When i had my other PSU plugged in the cable wasn't warm. So just want to double check on this.
|
|
|
|
Harbingold
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 01, 2019, 03:47:53 PM |
|
my miner is acting funny. not mining. started from scratch, new sd card, new image, new etch. it loads up, see it on the dashboard, starts mining then goes offline within 10 seconds starts back up. repeat. repeat. this pops up. Error: ECONNREFUSED 127.0.0.1:4020 thoughts?
Do you see a Red LED when it does this? I do yes. It seems to be in a cycle of restarting.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2156
Merit: 1400
|
|
August 01, 2019, 07:08:47 PM |
|
I received the PSU the other day and went to check on it after a few days of being used. The PSU is warm which is normal but the cable from PSU to the miner is warm too. i would say just 1/4 of length from PSU to miner is warm. I'm not sure if the cable is supposed to be warm?
When i had my other PSU plugged in the cable wasn't warm. So just want to double check on this.
Thats fine, that's just residual heat from the PCB being dumped back into the copper cables. You only have to worry if the black housing on the 6 Pin connector or the cables near it is super hot...this means some sort of bad electrical connection, and you should shutdown, unplug, and replug the connector and make sure its firmly in there.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2156
Merit: 1400
|
|
August 01, 2019, 07:09:18 PM |
|
my miner is acting funny. not mining. started from scratch, new sd card, new image, new etch. it loads up, see it on the dashboard, starts mining then goes offline within 10 seconds starts back up. repeat. repeat. this pops up. Error: ECONNREFUSED 127.0.0.1:4020 thoughts?
Do you see a Red LED when it does this? I do yes. It seems to be in a cycle of restarting. When it boots go set the fan speed manually to around 25% and see if it stops.
|
|
|
|
Jota_US
Newbie
Offline
Activity: 53
Merit: 0
|
|
August 01, 2019, 10:06:04 PM Last edit: August 01, 2019, 10:22:27 PM by Jota_US |
|
Received the miner, configured the pool but I get this on the dashboard
Error: connect ECONNREFUSED 127.0.0.1:4028
Not sure what to do now. I restarted the miner, rebooted the system but same thing. Led blinks yellow and I can see that miner is ONLINE (but 0.0 H/s) on the top of the dashboard
Edit: After a while, miner goes offline with red led
edit: So I switched off and on the donation pool and it looks like it did the trick
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2156
Merit: 1400
|
|
August 01, 2019, 11:26:59 PM |
|
Received the miner, configured the pool but I get this on the dashboard
Error: connect ECONNREFUSED 127.0.0.1:4028
Not sure what to do now. I restarted the miner, rebooted the system but same thing. Led blinks yellow and I can see that miner is ONLINE (but 0.0 H/s) on the top of the dashboard
Edit: After a while, miner goes offline with red led
edit: So I switched off and on the donation pool and it looks like it did the trick
What pool were you trying to connect too?
|
|
|
|
TheGasManII
Newbie
Offline
Activity: 8
Merit: 0
|
|
August 02, 2019, 12:05:14 AM |
|
Has anyone who ordered an Apollo+PSU on/after the middle of June gotten their shipping notification yet?
I ordered May 11 and just got mine today. And that brings me to why I am here. I got it hooked and mining. All good there. I went to setup WiFi, scanned, found and entered password for WiFi. Error returned...There was a problem connecting to the wifi, please doucle check the password. Internal error Password is correct, confirmed multiple times.
|
|
|
|
Jota_US
Newbie
Offline
Activity: 53
Merit: 0
|
|
August 02, 2019, 12:23:06 AM |
|
Received the miner, configured the pool but I get this on the dashboard
Error: connect ECONNREFUSED 127.0.0.1:4028
Not sure what to do now. I restarted the miner, rebooted the system but same thing. Led blinks yellow and I can see that miner is ONLINE (but 0.0 H/s) on the top of the dashboard
Edit: After a while, miner goes offline with red led
edit: So I switched off and on the donation pool and it looks like it did the trick
What pool were you trying to connect too? Litecoinpool. It looks like when I turn donation pool off I get this error.
|
|
|
|
TheGasManII
Newbie
Offline
Activity: 8
Merit: 0
|
|
August 02, 2019, 12:37:49 AM |
|
Received the miner, configured the pool but I get this on the dashboard
Error: connect ECONNREFUSED 127.0.0.1:4028
Not sure what to do now. I restarted the miner, rebooted the system but same thing. Led blinks yellow and I can see that miner is ONLINE (but 0.0 H/s) on the top of the dashboard
Edit: After a while, miner goes offline with red led
edit: So I switched off and on the donation pool and it looks like it did the trick
What pool were you trying to connect too? Litecoinpool. It looks like when I turn donation pool off I get this error. Do you have a worker setup @ litecoinpool.org?
|
|
|
|
Jota_US
Newbie
Offline
Activity: 53
Merit: 0
|
|
August 02, 2019, 03:10:07 AM |
|
Received the miner, configured the pool but I get this on the dashboard
Error: connect ECONNREFUSED 127.0.0.1:4028
Not sure what to do now. I restarted the miner, rebooted the system but same thing. Led blinks yellow and I can see that miner is ONLINE (but 0.0 H/s) on the top of the dashboard
Edit: After a while, miner goes offline with red led
edit: So I switched off and on the donation pool and it looks like it did the trick
What pool were you trying to connect too? Litecoinpool. It looks like when I turn donation pool off I get this error. Do you have a worker setup @ litecoinpool.org? Yes I'm mining now. As I said it looks like I need to have the donation pool ON in order to not get this error. While I don't mind donating I'd like to have the option. I'll try again later to turn donation pool off and see.
|
|
|
|
TheRipler
Newbie
Offline
Activity: 9
Merit: 0
|
|
August 02, 2019, 03:25:24 AM |
|
Has anyone who ordered an Apollo+PSU on/after the middle of June gotten their shipping notification yet?
I ordered May 11 and just got mine today. And that brings me to why I am here. I got it hooked and mining. All good there. I went to setup WiFi, scanned, found and entered password for WiFi. Error returned...There was a problem connecting to the wifi, please doucle check the password. Internal error Password is correct, confirmed multiple times. The easiest way I found to get wifi working is through the shell. - SSH to the system. (futurebit:futurebit)
- run 'sudo armbian-config'
- go to Network->wlan0->
- If you tried to configure through the web interface, select "Forget" (otherwise continue to WiFi)
- select WiFi, and activate your wifi network here
- once connected, cancel out.
Once you reboot without ethernet plugged in, it should come up on WiFi.
|
|
|
|
TheGasManII
Newbie
Offline
Activity: 8
Merit: 0
|
|
August 02, 2019, 11:35:15 AM |
|
Has anyone who ordered an Apollo+PSU on/after the middle of June gotten their shipping notification yet?
I ordered May 11 and just got mine today. And that brings me to why I am here. I got it hooked and mining. All good there. I went to setup WiFi, scanned, found and entered password for WiFi. Error returned...There was a problem connecting to the wifi, please doucle check the password. Internal error Password is correct, confirmed multiple times. The easiest way I found to get wifi working is through the shell. - SSH to the system. (futurebit:futurebit)
- run 'sudo armbian-config'
- go to Network->wlan0->
- If you tried to configure through the web interface, select "Forget" (otherwise continue to WiFi)
- select WiFi, and activate your wifi network here
- once connected, cancel out.
Once you reboot without ethernet plugged in, it should come up on WiFi. Thank you very much! I will try this, this evening when I get home.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2156
Merit: 1400
|
|
August 02, 2019, 12:33:30 PM |
|
Received the miner, configured the pool but I get this on the dashboard
Error: connect ECONNREFUSED 127.0.0.1:4028
Not sure what to do now. I restarted the miner, rebooted the system but same thing. Led blinks yellow and I can see that miner is ONLINE (but 0.0 H/s) on the top of the dashboard
Edit: After a while, miner goes offline with red led
edit: So I switched off and on the donation pool and it looks like it did the trick
What pool were you trying to connect too? Litecoinpool. It looks like when I turn donation pool off I get this error. Do you have a worker setup @ litecoinpool.org? Yes I'm mining now. As I said it looks like I need to have the donation pool ON in order to not get this error. While I don't mind donating I'd like to have the option. I'll try again later to turn donation pool off and see. Donation pool has no effect on this unless you are on a multi pool or mining a different coin other than litecoin. Are you sure your even mining to your account and not 100% to donation pool? Sounds like your credentials are wrong so it’s defaulting to donation pool.
|
|
|
|
|