Alright since my price point is competing with both gridseeds at $200 each for 330Kh/s scrypt and antminers at $700 each for 200Mh/s SHA256 I've decided to put these rigs into an auction format.
Details on the hardware below price will include shipping to the continental US. Escrow at buyers expense w/ trusted forum member if requested.
Starting bid 1
BTCincrements .01
BTCStarting when I click post
auction ending 3/19/14 at 11am EST to highest bidder above 1
BTCBuy it now 1.65
BTC shipped in the US
Stats from where they are currently pointed
2.8 MH/s 24-hour Average
Rejected: 0.3 MH/s (9.8%)
Rig 1MSI MS-7390 Motherboard - 2 16x 2 1x pcie slots
7 gigs ram total all 4 slots occupied
Quad Core CPU (socket am2) + Heatsink/fan
power switch
2 1x to 16x non-powered risers included
HP/Delta Electronics 1050 watt power supply - 80 plus certified
sata to pcie and/or molex to pcie connectors included
XFX 6950 flashed to 6970
Gigabyte HD7850
4 gig jump drive running BAMT 1.1 can be included if needed would be default install
This is currently running at 770Kh/s with no overclocking those 2 cards are capable of 850+Kh/s when overclocked
Rig 2HP DC5800 motherboard - 1 16x 2 1x pcie slots
2 gigs ram total all 4 slots occupied
socket 775 cpu + heatsink/fan
power switch
2 1x to 16x non-powered risers included
HP/Delta Electronics 800 watt power supply
sata to pcie and/or molex to pcie connectors included
XFX 6870
AX6870 w/ arctic accelero twin turbo
HD5850 w/ arctic accelero L2 plus
4 gig jump drive running BAMT 1.1 can be included if needed would be default install
This is currently running at 900Kh/s with no overclocking those 3 cards are capable of 1+Mh/s when overclocked
Rig 3HP xw4300 motherboard - 1 16x 1 8x 1 1x pcie slots
2 gigs ram total all 4 slots occupied
socket 775 cpu (says processor not supported on boot (core 2 duo I believe, but boots and runs bamt fine) + heatsink/fan
power switch
2 1x to 16x non-powered risers included
HP/Delta Electronics 800 watt power supply
sata to pcie and/or molex to pcie connectors included
MSI 6850 - occasionally has to be reset as temp shows 510* and quits mining has been mining 2+ days currently stable
HD5830 Extreme - has an aftermarket fan clipped on the heatsink (runs cooler than any other cards I own, but can include a brand new arctic accelero L2 plus)
H6790 - 679F1GD - different fan is glued and spliced on this one as well temp runs fine
4 gig jump drive running BAMT 1.1 can be included if needed would be default install (this one is wrapped in black electrical tape since the casing broke)
This is currently running at 690Kh/s with no overclocking those 3 cards are capable of 780-800Kh/s when overclocked
2 of the cards are hanging from their metal brackets from wires attached to the ceiling they are not magic or floating without assistance!
Rig 4HP DC5800 motherboard - 1 16x 2 1x pcie slots
3 gigs ram total all 4 slots occupied
socket 775 cpu + heatsink/fan - This socket 775 bracket did not fit right so had cardboard on the underside of the mobo to pull the heatsink tight and the fan is screwed right into the heatsink.
power switch
2 1x to 16x non-powered risers included
HP/Delta Electronics 800 watt power supply
sata to pcie and/or molex to pcie connectors included
HD 5830 Extreme - occasionally artifacts fine after reboot
HIS 6870 - fickle - starts at 0KH/s but mines fine after restart of mining software
No jump drive or hard drive included - this is currently running fine on win7 because bamt complained and would show GPU errors so unknown if BAMT works with this one.
This is currently running at 550Kh/s between the 2 cards with no overclocking those cards are capable of 600+Kh/s when overclocked. No new pic, but both cards are in this rig now in a "milk crate" frame. This rig takes time to get working correctly. Currently win7 64 bit, bfgminer 3.10, 13.12 catalyst, sdk 2.9, cgwatcher restarting bfgminer on hashrate drop or dead/sick cards. Do not think you will plug this in and go as I kept getting gpu faults within BAMT which is why I switched to Win7, but has been mining fine for 3 days on the above config (bfg miner relaunches 1-2 times a day).
Extra Card GraveyardHD5830 Extreme - Bare Card does not detect in win or bamt
VT5850 - fan/heatsink - does not detect in win or bamt
6950 - H695FN1G2M - Bare - can throw in a gel icy vision cooler with no mounting screws or hardware with this one - this card had heavy artifacts and would not mine last time I tried installing it
Diamond 6970 - detects by both win and bamt will mine for a second then lock up showing a negative temp reading?
Radeon Ref 5870 - fan driller and oiled - detects in win and bamt - will mine for a few minutes then rate drops to 0
Understanding this is mining hardware and as I did the best to describe any issues it can be fickle as many of you know so would prefer escrow be released on delivery and can work with the buyers.
The 3 HP motherboard do not include system/case fans or USB headers, but they complain on boot about those not being installed so require you to hit F1 on boot.
The PSUs are larger than standard size. They have the same bolt pattern to attach to a frame etc, but are longer.
