Updates :V2.6.7+ Fixed 'low difficulty share' issue on algorithm 'verushash' for CPU mining
+ Minor bug fixes
V2.6.6+ Added algorithm 'hoohash' (Hoosat coin) for GPU mining [AMD/NVIDIA/INTEL], fee 2.00%
+ Added support for dual mining FISHHASH/HOOHASH on AMD RDNA/RDNA2/RDNA3, NVIDIA (except Pascal) and INTEL GPU's
+ Added support for dual mining KARLSENHASHV2/HOOHASH on AMD RDNA/RDNA2/RDNA3, NVIDIA (except Pascal) and INTEL GPU's
+ Added support for dual mining AUTOLYKOS2/HOOHASH on AMD RDNA/RDNA2/RDNA3, NVIDIA and INTEL GPU's
+ Added parameter 'autolykos2-preload' which enables preloading of the next dataset on Autolykos2/Blocx if GPU has enough free memory
+ Fixed mining of algorithm 'verushash' on Nicehash
+ Removed algorithm 'memehash'
+ Removed dual mining support on INTEL GPU's for : AUTOLYKOS2/SHA256DT-RADIANT-HEAVYHASH-PYRINHASH-KARLSENHASH
V2.6.5+ Added algorithm 'astrixhash' (Astrix coin) for GPU mining [AMD/NVIDIA/INTEL], fee 1.00%
V2.6.4+ Added algorithm 'pyrinhashv2' (Pyrin coin) for GPU mining [AMD/INTEL], fee 0.85%
+ Added support for dual mining KARLSENHASHV2/PYRINHASHV2 on AMD RDNA/RDNA2/RDNA3 and INTEL GPU's
+ Added support for dual mining FISHHASH/PYRINHASHV2 on AMD RDNA/RDNA2/RDNA3 and INTEL GPU's
+ Added support for dual mining AUTOLYKOS2/PYRINHASHV2 on AMD RDNA/RDNA2/RDNA3 and INTEL GPU's
+ Improved performance of algorithm 'autolykos2' on INTEL ARC GPU's
+ Algorithm 'autolykos2' not showing dataset related information by default anymore (enable --extended-log to see it)
+ Fixed a bug that produced 'validation errors' on algorithm 'autolykos2' after switching back from ZIL mining
+ Reminder : Algorithm 'karlsenhashv2' supported since version 2.5.8 on AMD/NVIDIA/INTEL GPU's - ready for HF at sept. 13
V2.6.3+ Added algorithm 'blocx_autolykos2' (Blocx coin) for GPU mining [AMD/NVIDIA/INTEL], fee 1.00%
+ Every dual mining combination that is available for 'autolykos2' can be used with 'blocx_autolykos2' [ decred / blake3_alephium / heavyhash / sha512_256d_radiant / sha256dt / karlsenhash / pyrinhash ]
V2.6.2+ Added algorithm 'xelishashv2_pepew' [Pepepow] for CPU mining, fee 1.5%
+ Improved hashrate for all progpow based algorithms on AMD VEGA and ELLESMERE GPUS
+ Minor hashrate improvement on 'progpowz' and 'progpow_telestai' algorithms on NVIDIA GPUS
+ Minor hashrate improvement on 'progpow_telestai' algorithm on AMD RDNA2 GPUS
+ Lowered devfee on algorithm 'xelishashv2' to 1.5%
+ Removed algorithm 'memehash_apepepow'
+ Removed parameter '--gpu-progpow-mode'
+ Minor bug fixes
V2.6.1+ Added algorithm 'progpow_telestai' (TELESTAI coin) for GPU mining [AMD/NVIDIA/INTEL], fee 0.85%
V2.6.0+ Added parameter '--dns-over-https' , accepts values 0-3 [0 - Google, 1 - Cloudflare, 2 - AhADNS, 3 - Belnet]
+ Added support for mining algorithm 'verthash' on NVIDIA/INTEL GPU's
+ Fixed a bug that crashed miner when mining algorithm 'randomepic' with another randomx algorithm
+ Fixed a bug that produced many stale shares when mining algorithm 'progpow_epic' with another algorithm
+ Algorithm 'firopow' now prepends prefix '0x' with submit messages which fixes StakeCubeCoin invalid shares issue
+ Minor bug fixes
V2.5.9+ Added AVX512 support for CPU algorithm 'xelishashv2'
V2.5.8+ Added algorithm 'xelishashv2' [Xelis] for CPU mining, fee 2.0%
+ Added algorithm 'karlsenhashv2' [Karlsen] for GPU mining [AMD/NVIDIA/INTEL], fee 1.0% *
+ Fixed miner crashing on 'ghostrider' based algorithms if no huge pages were available
+ Minor bug fixes
V2.5.7+ Improved performance on algorithms 'ghostrider' and 'mike'
+ Improved performance on algorithm 'flex' for AVX2 CPU's
+ Miner now automatically allocates the needed number of huge pages on Linux (must run with root privileges)
+ Removed parameters: '--disable-cpu-optimisations', '--disable-hw-aes'
+ Randomx bug fixes
+ Minor bug fixes
V2.5.6+ Added algorithm 'flex' [Kylacoin] for CPU mining, fee 2.0%
+ Added algorithm 'randomxeq' [Equilibria] for CPU mining, fee 0.85%
V2.5.5+ Added support for mining 'xelishash' algorithm on INTEL ARC GPU's
+ Added support for dual mining FISHHASH/KARLSENHASH on AMD RDNA/RDNA2/RDNA3 and INTEL GPU's
+ Performance improvement on algorithm 'xelishash' for AMD GPU's and AVX2 CPU's [up to ~13% depending from gpu]
+ Minor bug fixes
V2.5.4+ Added support for GPU mining algorithm 'xelishash' [Xelis] on AMD GPU's, fee 2.0%
+ Performance improvement on algorithm 'xelishash' for CPU's
+ Fixed mining of algorithm 'blake3_decred' broke in previous version
+ Minor bug fixes
V2.5.3+ Added algorithm 'randomtuske' [Tuske Network] for CPU mining, fee 0.85%
+ Added algorithm 'xelishash' [Xelis] for CPU mining, fee 0.85%*
+ Minor performance improvement on 'randomx' based algorithms
+ DevFee for 'randomscash' algorithm lowered to 0.85%
+ Fixed mining on AMD BC-250 for algorithms : AUTOLYKOS2, AUTOLYKOS2/BLAKE3_ALEPHIUM/BLAKE3_DECRED, ETHASH/BLAKE3_ALEPHIUM, ETHASHB3/BLAKE3_ALEPHIUM, FISHHASH/BLAKE3_ALEPHIUM
+ Fixed invalid shares on a few algorithms broke in previous version
+ Minor bug fixes
V2.5.2+ Added algorithm 'randomscash' [Satoshi Cash] for CPU mining, fee 1.00%
+ Performance improvement on algorithm 'fishhash' for AMD Rx400/500 GPU's
V2.5.1+ Added support for AMD BC-250 Mining GPU's
+ DevFee for 'fishhash' algorithm lowered to 0.85%
V2.5.0+ Added algorithm 'fishhash' [IronFish] for GPU mining on AMD/NVIDIA/INTEL, fee 1.00%
+ Added support for dual mining FISHHASH/BLAKE3_ALEPHIUM on AMD RDNA/RDNA2/RDNA3, NVIDIA and INTEL GPU's
+ Added support for dual mining FISHHASH/BLAKE3_DECRED on AMD RDNA/RDNA2/RDNA3, NVIDIA and INTEL GPU's
+ Added support for dual mining FISHHASH/SHA512_256D_RADIANT on AMD RDNA/RDNA2/RDNA3, NVIDIA and INTEL GPU's
+ Added support for dual mining FISHHASH/PYRINHASH on AMD RDNA/RDNA2/RDNA3 and INTEL GPU's
+ Added support for mining 'yescrypt' algorithms on AMD gfx1100 GPU's (RDNA3)
+ Fixed dual mining of AUTOLYKOS2/PYRINHASH on INTEL ARC GPU's
+ Auto setup (threads/affinity) for 'yespower' and 'yescrypt' algorithms on CPU should now work better
+ Removed support for AMD RX550/560 GPU's
+ Removed algorithm 'blake3_ironfish'
+ Removed algorithm 'xdag'
+ Removed parameter 'gpu-progpow-preload'
+ Minor bug fixes
V2.4.9+ Added support for GPU mining algorithm 'meowpow' [Meow coin] on AMD/NVIDIA/INTEL GPU's, fee 0.85%
+ Fixed possible invalid shares on PROGPOW algorithms [AMD Ellesmere GPU's]
+ TLS/SSL pool connections now supported over socks5 proxy (--proxy parameter)
V2.4.8+ Added support for mining PROGPOW algorithms on INTEL GPU's [kawpow, firopow, progpow_epic, progpow_zano]*
+ Added support for GPU mining algorithm 'aurum' on AMD/NVIDIA/INTEL GPU's
+ Added support for dual mining ETHASHB3/SHA512_256D_RADIANT on INTEL ARC GPU's
+ Added support for algorithm 'heavyhash' on AMD VEGA GPU's on Linux (ROCM)
+ Performance improvement on PROGPOW algorithms on AMD/NVIDIA GPU's
+ Performance improvement on algorithm 'aurum' for CPU's
+ Returned support for mining algorithm 'cryptonight_ccx' on CPU and AMD GPU's [ UltraNote Infinity coin ]
+ Setting any cclock or mclock OC parameter's value to 0 will now reset the value of core clock / memory clock to the default value
+ Fixed broken DUAL AUTOLYKOS2/BLAKE3_ALEPHIUM on some AMD RDNA2 GPUs
+ Fixed a bug with 'autolykos2' that could cause bad dataset creation (invalid shares)
+ Fixed a bug with nonce distribution for algorithm 'randomepic' on EpicMine pool
+ Removed parameters and functionality for : '--gpu-buffer-mode', '--gpu-disable-auto-buffer', '--max-difficulty', '--start-block-height', '--gpu-autolykos2-preload', '--multi-algorithm-job-mode', '--gpu-auto-tune', '--gpu-ethash-mode'
+ Linux releases will be packed with tar.gz from now on [ not tar.xz as before ]
V2.4.7+ Performance improvement on algorithm 'aurum' for AVX2 supported CPU's
+ Fixed broken 'yespower' algorithms
+ Fixed broken algorithm 'blake3_decred'
+ Fixed broken --gpu-coffset and --gpu-moffset parameters (Linux)
+ Added parameter '--cpu-numa-bind' which can force binding of CPU worker threads to a specific NUMA node (per algorithm)*
+ Default --esm (ethereum stratum mode) value for algorithms 'ethash' and 'etchash' is now 2 (EthereumStratum 1.0 + nicehash mode)
+ Renamed parameter 'disable-numa' to 'disable-numa-binding'
+ Minor bug fixes
V2.4.6+ Added algorithm 'aurum' (BitNet) for CPU mining, fee 2.00%
+ Minor performance improvement on algorithm 'blake3_alephium'
+ Added support for algorithm 'cryptonight_turtle' on AMD gfx1100
+ Added Vega56/64 rocm binary for algorithm 'cryptonight_turtle'
+ Minor bug fixes
V2.4.5+ Minor performance improvement on algorithm 'karlsenhash' for AMD RDNA2 GPU's
+ Minor performance improvement on algorithm 'sha3d'
+ OC parameters (NVIDIA) should now work as expected on both WINDOWS and LINUX
+ Fixed issue with lower poolside hashrate on algorithm 'blake3_alephium' introduced in previous version
+ Fixed an issue that caused higher difficulty to be used than what the pool sent - on some algorithms, introduced in previous version
+ Removed algorithms : blake2b, blake2s, yespowerlitb, yespoweriots, yespoweritc, yespowerres, yespowerarwn, cryptonight_talleo, cryptonight_ccx, randomhash2, scryptn2, k12, keccak, dynamo, minotaur, kaspa
V2.4.4+ Added algorithm 'pyrinhash' (Pyrin) for GPU mining on AMD/INTEL, fee 0.85%
+ Added algorithm 'blake3_decred' (Decred) for GPU mining on AMD/NVIDIA/INTEL, fee 1.0%
+ Added support for dual mining AUTOLYKOS2/PYRINHASH on AMD RDNA/RDNA2/RDNA3 and INTEL GPU's
+ Added support for dual mining AUTOLYKOS2/BLAKE3_DECRED on AMD/NVIDIA/INTEL GPU's
+ Added support for dual mining ETHASH/BLAKE3_DECRED on AMD/NVIDIA/INTEL GPU's
+ Added support for dual mining ETCHASH/BLAKE3_DECRED on AMD/NVIDIA/INTEL GPU's
+ Added support for dual mining ETHASHB3/BLAKE3_DECRED on AMD/NVIDIA/INTEL GPU's
+ Improved efficiency on algorithm 'blake3_alephium' for AMD RDNA2/RDNA3, NVIDIA GPU's
+ Miner will now create '--gpu-id' parameter values internally (if not already defined) when using an OC parameter that has multiple different values.
+ Minor bug fixes
V2.4.3+ Performance improvement on algorithm 'karlsenhash' for some AMD GPUs and INTEL ARC GPU's
+ Added support for dual mining AUTOLYKOS2/KARLSENHASH on AMD RDNA/RDNA2/RDNA3 and INTEL ARC GPU's
+ Added support for dual mining ETHASHB3/KARLSENHASH on AMD Ellesmere, RDNA/RDNA2/RDNA3 and INTEL ARC GPU's
+ DevFee for 'karlsenhash' algorithm lowered to 0.85%
+ Minor bug fixes
V2.4.2+ Minor performance improvement on algorithm 'karlsenhash'
+ Added support for AMD gfx906 (VII) GPU's on Linux for drivers > 22.40
+ Added telemetry for INTEL ARC GPU's on Windows
+ Fixed power draw metric for AMD RDNA3 GPU's on Windows
+ Minor bug fixes
V2.4.1+ Added algorithm 'karlsenhash' (Karlsen) for GPU mining [AMD/NVIDIA/INTEL], fee 1.0%
+ Added algorithm 'randomnevo' (NevoCoin) for CPU mining, fee 0.85%
+ Added support for dual mining ETHASHB3/SHA256DT on AMD/NVIDIA/INTEL GPU's
+ Lowered devfee on algorithm 'memehash' to 0.85%
+ Removed algorithms 'randomxl' and 'randomwow'
+ Added parameter '--gpu-disable-oc' which completely disables built-in OC functionality
+ Minor bug fixes
V2.4.0+ Added support for algorithm 'cryptonight_xhv' on NVIDIA GPUs
+ Added support for algorithm 'cryptonight_gpu' on NVIDIA GPUs
+ Added support for algorithm 'ethashb3' on INTEL ARC GPUs
+ Added support for dual mining ETHASHB3/BLAKE3_ALEPHIUM on AMD Ellesmere GPUs
+ Added support for dual mining ETHASHB3/SHA512_256D_RADIANT on AMD Ellesmere GPUs
+ Added support for dual mining ETHASHB3/BLAKE3_ALEPHIUM on INTEL ARC GPUs
+ Improved performance on algorithm 'autolykos2' for NVIDIA, INTEL ARC and some AMD GPU's
+ Improved auto tuner for DUAL mining [control A0/A1 ratio with --gpu-dual-max-loss]
+ Removed algorithm 'dynex'
+ Removed built-in AMD GPU memory tweaking options
+ Minor bug fixes
V2.3.9+ Fixed invalid shares issue on algorithm 'dynex' [introduced in v2.3.8]
+ Performance improvement on algorithm 'dynex' for some GPU's
+ Reduced devfee for algorithm 'dynex' to 2.0%
+ Added accepted/rejected/compute error stats per GPU in json API->algorithms
+ Minor bug fixes
V2.3.8+ Added support for NVIDIA 'Volta' architecture - displayed as 'unknown_nvidia' but supported algorithms should work
+ Dynex bug fixes
+ Minor bug fixes
V2.3.7+ Performance improvement on algorithm 'dynex' on AMD and NVIDIA GPUs
+ Minor bug fixes
V2.3.6+ Added support for algorithm 'dynex' on NVIDIA GPUs
+ Performance improvement on algorithm 'dynex' on AMD GPUs
+ Removed Dynex optimised dual kernels
+ Lowered devfee for algorithm 'ethashb3' to standard 0.85%
+ Added parameter '--busy-wait-recheck' which sets the NVIDIA/INTEL GPUs OpenCL busy wait recheck value per algorithm
V2.3.5+ Added support for dual mining ETHASHB3/BLAKE3_ALEPHIUM on NVIDIA and AMD RDNA1/2/3 GPUs
+ Minor performance improvement on algorithm 'ethashb3'
+ Minor performance improvement on algorithm 'dynex'
+ Lowered devfee for algorithm 'ethashb3' to 1%
+ Added field 'wallet' to API->algorithms->pool
+ Minor bug fixes
V2.3.4+ Added algorithm 'ethashb3' (RETHEREUM coin) support for NVIDIA GPUs
+ Added support for dual mining ETHASHB3/SHA512_256D_RADIANT on NVIDIA and AMD RDNA1/2/3 GPUs
+ Added gfx906 (Vega VII) binaries for algorithm 'dynex' on newer drivers (tested on 22.40.6)
+ Fixed gfx900 mining on algorithm 'dynex' broke in previous version
V2.3.3+ Added algorithm 'ethashb3' (RETHEREUM coin) for GPU mining, fee 2% [AMD only]*
+ Minor performance improvement on algorithm 'dynex' [Dynexcoin]
+ Bug fixes for algorithm 'dynex'*
+ Minor bug fixes
V2.3.2+ Performance improvement on algorithm 'dynex' [Dynexcoin]
+ Added parameter '--gpu-dynex-r' (performance tuning for algorithm 'dynex' - min 1, max 16)
+ Removed auto tuner for algorithm 'dynex' [it was causing data reporting issues]
+ Minor bug fixes
V2.3.1+ Updated algorithm 'dynex' to support dynexsolve 2.3.0 (new job types, FP64, etc.)
+ Removed support for INTEL GPU's on algorithm 'dynex'
+ Removed support for NVIDIA GPU's on algorithm 'dynex' [temporary]
+ Fixed dual ERG/ETC/ETH + SHA256DT kernels on some GPU's broken since V2.2.6
+ Minor bug fixes
V2.3.0+ Improved mining performance on algorithm 'dynex' for AMD/NVIDIA/INTEL GPU's*
+ Added algorithm 'memehash_apepepow' (APEPEPOW coin) for CPU mining, fee 2%*
+ Added shares (accepted/rejected) statistics for CPU mining
+ Reduced miner binary size
+ Minor bug fixes
V2.2.9+ Improved mining performance on algorithm 'memehash' for AMD/NVIDIA/INTEL GPU's
+ Added VerusCoin PBAAS support
+ Minor bug fixes
V2.2.8+ Added algorithm 'memehash' (PEPEPOW coin) for CPU/GPU mining, fee 2% [AMD/NVIDIA/INTEL]
+ Minor improvement for algorithm 'dynex' in dual mining mode
+ Fixed hashrate regression on 'sha512_256d_radiant' algorithm for RX6600 GPU's [single mode]
+ Fixed algorithm 'lyra2v2_webchain' on NVIDIA GPU's broken in previous versions
+ Fixed algorithm 'autolykos2' in dual mining with 'sha512_256d_radiant' for some GPU's broken in previous version
+ Added sum of accepted/rejected/hw error shares to stats
+ Added parameter '--disable-gpu-dual-kernels' [disables usage of optimised dual kernels]
V2.2.7+ Significantly improved mining performance of dual kernels for algorithm 'dynex' [AMD/NVIDIA/INTEL]
+ Added kernels for DUAL mining : DYNEX/BLAKE3_ALEPHIUM, DYNEX/SHA256DT
+ Improved mining performance on algorithm 'dynex' for some GPU's
+ Fixed algorithm 'sha256dt' broken in previous versions
+ Fixed algorithm 'dynamo' broken in previous versions
+ Fixed algorithm 'autolykos2' in dual mining for Nvidia Turing GPU's broken in previous version
+ Fixed low hashrate issue (again) when connecting to some ALEPHIUM pool/s [alph-pool.com, coinhunters.space, woolypooly for ex.]
+ Minor bug fixes
V2.2.6+ Improved mining performance on algorithm 'blake3_alephium' for AMD/NVIDIA/INTEL [Alephium]
+ Improved mining performance on algorithm 'sha256dt' for AMD/NVIDIA/INTEL [Novo]
+ Improved mining performance on algorithm 'dynex' for some AMD/NVIDIA GPU's [Dynexcoin]
+ Improved mining performance on algorithm 'sha512_256d_radiant' for NVIDIA (Pascal, Turing) and AMD gfx1100 [Radiant]
+ Improved mining performance on algorithm 'sha3d' for NVIDIA GPUS [Kylacoin]
+ Improved mining performance on many dual algorithms for AMD gfx1100
+ Added kernels for DUAL mining : DYNEX/BLAKE3_IRONFISH, DYNEX/KASPA
+ Added support for AMD gfx1100 on algorithm 'sha3d'
+ Better auto tune for algorithm 'dynex'
+ Fixed low diff shares issue when connecting to some RXD,NOVO and KYLACOIN pool/s [vipor.net for ex.]
+ Fixed low hashrate issue when connecting to some ALEPHIUM pool/s [alph-pool.com, coinhunters.space, woolypooly for ex.]
+ Fixed some bugs when using --multi-algorithm-job-mode 3
+ Removed keyboard shortcut 'h'. Hashrate stats will be displayed periodically.
+ Minor bug fixes
V2.2.5+ Significantly improved mining performance on algorithm 'dynex' for AMD/NVIDIA/INTEL
+ Improved mining performance on algorithm 'blake3_ironfish' for AMD/NVIDIA/INTEL in single and dual modes
+ Added support for algorithm 'sha3d' on NVIDIA/INTEL GPU's
+ Ironfish is now compatible with pools using stratum v2
+ Added optimised kernel for DUAL mining : DYNEX/SHA512_256D_RADIANT
+ Added auto tune for algorithm 'dynex' that will try to find an optimal gpu intensity value
+ Removed CPU POW [algorithm 'dynex']
+ Algorithm 'xdag' is now compatible with xdagj 0.6.1
+ Fixed broken RXD/ALEPH mining on RDNA gpus [linux]
+ If using '--gpu-reset-oc' parameter, it will get applied also on miner shutdown
+ Bug fixes
V2.2.4+ Improved mining performance on algorithm 'dynex' for AMD/NVIDIA/INTEL
+ More chips can now fit in VRAM on algorithm 'dynex'
+ Lowered devfee for algorithm 'dynex' to 2.5%
+ Small hashrate improvements on algorithm 'blake3_alephium' & lower power consumption
+ Small hashrate improvements on algorithm 'blake3_ironfish' & lower power consumption
+ Fixed --gpu-coffset and --gpu-moffset parameters on Windows
+ Minor bug fixes
V2.2.3+ Improved mining performance on algorithm 'dynex' for AMD/NVIDIA
+ Added fan control for NVIDIA GPU'S : --gpu-fan0, --gpu-fan1, --zil-fan parameters
+ Added support for gfx900 on ROCM drivers for algorithm 'dynex'
+ Minor bug fixes
V2.2.2+ Moved CPU part of the POUW work for algorithm 'dynex' on NVIDIA GPU's to the GPU*
+ Better utilization of CPU's that have more threads than running GPU's for algorithm 'dynex'
+ Parameter '--dynex-cpu-pow' now expects GPU id's of devices on which you want to use the old CPU POW method
+ Increased value of auto intensity a little bit under Linux OS for algorithm 'dynex'*
+ Minor bug fixes
V2.2.1+ Moved CPU part of the POUW work for algorithm 'dynex' on AMD and INTEL GPU's to the GPU*
+ Added parameter '--dynex-cpu-pow' which uses the old way of 'dynex' hashing
+ Added parameter '--gpu-reset-oc' which resets OC settings to their default values on miner start [NVIDIA]
+ Reduced default value for intensity (number of chips) on algorithm 'dynex'
+ Removed auto-tune for algorithm 'dynex'
+ Bug fixes for algorithm 'dynex'
V2.2.0+ Added algorithm 'dynex' (DYNEX coin) for GPU mining, fee 3.0%* [AMD/NVIDIA/INTEL]
+ Added INTEL ARC support for algorithms : autolykos2, etchash, ethash, ubqhash, blake3_ironfish
+ Added INTEL ARC support for dual mining : autolykos2/kaspa, autolykos2/heavyhash, autolykos2/sha512_256d_radiant, autolykos2/sha256dt, autolykos2/blake3_alephium, autolykos2/blake3_ironfish
+ Added dynex specific parameter '--mallob-endpoint'
+ Fixed 'blake3_ironfish' algorithm [also for DUAL modes]
+ Fixed 'sha256dt' algorithm for Nvidia ADA and HOPPER architectures
+ Added parameter '--disable-ptx-check' [nvidia]
+ Fixed bugs with NVIDIA OC parameters
V2.1.0+ Added support for INTEL Alchemist architecture (INTEL ARC 300/500/700)
+ ZIL is now mineable in any single/dual algorithm combination [triple mining]*
+ Added ZIL parameters '--zil-enable', '--zil-pool', '--zil-wallet', '--zil-password', '--zil-esm', '--zil-epoch', '--zil-oc-script'
+ Added ZIL OC parameters '--zil-cclock', '--zil-mclock', '--zil-coffset', '--zil-moffset', '--zil-plimit'
+ Added auto buffer mode for ZIL mining*
+ Added parameters '--disable-gpu-intel', '--gpu-disable-auto-buffer'
+ Added OC parameters '--gpu-cclock1', '--gpu-mclock1', '--gpu-coffset1', '--gpu-moffset1', '--gpu-plimit1'
+ Removed parameters '--gpu-ethash-dag-cache', '--a0-is-zil'
+ Renamed parameters '--a0-start-script' to '--a0-oc-script' , '--a1-start-script' to '--a1-oc-script', '--start-script-delay' to '--oc-delay'
+ Added '--esm 2' which indicates that 'EthereumStratum/1.0.0' + nicehash mode is used for communication with the pool*
+ Allowed separator ',' (comma) which can be used as an alternative for the current '!' separator in all parameters except in '--password'
+ Added custom miner version for Hiveos so you can run 2 SRBMiner instances on the same rig*
+ Minor bug fixes
V2.0.2+ Improved mining performance on 'sha512_256d_radiant' for AMD RDNA/RDNA2 GPU's and NVIDIA Ampere GPU's
+ Improved mining performance on dual ETCHASH/ETHASH + SHA512_256D_RADIANT for AMD RDNA2 GPU's
+ Added experimental support for NVIDIA architectures older than 'Pascal'
+ Added GPU OC parameters '--gpu-coffset', '--gpu-moffset' [ NVIDIA - LINUX only ]
+ Fixed bug with --gpu-cclock , --gpu-mclock and --gpu-plimit getting applied in dual mining mode
+ Removed obsolete algorithms: cosa, circash, 0x10, frkhash, balloon_zentoshi
+ Minor bug fixes
V2.0.1+ Added support for NVIDIA 'Hopper' architecture
+ Added NVIDIA support for algorithms : UBQHASH, DYNAMO, BLAKE3_IRONFISH
+ Added GPU OC parameter '--gpu-plimit' [ NVIDIA only ]
+ Re-added kernels for dual ETHASH/ETCHASH/AUTOLYKOS2 + BLAKE3_IRONFISH because of testnet3 [ NVIDIA support added ]
+ Fixed detection of NVIDIA GPU's
+ Fixed compatibility with older NVIDIA drivers
+ Various fixes for mining on nicehash pools / nicehash mode
+ Minor bug fixes
V2.0.0+ Added support for NVIDIA architectures : Pascal, Turing, Ampere, Ada Lovelace
+ Added parameters '--disable-gpu-amd', '--disable-gpu-nvidia'
+ Added GPU OC parameters '--gpu-cclock' and '--gpu-mclock' [NVIDIA Volta and newer]
+ Added GPU efficiency to stats & API
+ Removed kernels for dual ETHASH/ETCHASH/AUTOLYKOS2 + BLAKE3_IRONFISH
V1.1.4+ Added support for gfx1100 (RDNA3 : RX 7900) GPU's
+ Fixed hashrate regression on 'autolykos2' algorithm for Vega/Ellesmere GPU's that was introduced unintentionally in an earlier version
+ Renamed '--adl-disable' parameter to '--gpu-sensors-disable'
+ Minor bug fixes
V1.1.3+ Fixed miner crashing on ETHASH/ETCHASH + KASPA/HEAVYHASH dual mining options that appeared in previous version [ 1.1.2 ]
+ Added parameters '--a0-start-script' and '--a1-start-script' which run a user defined script every time algorithm 0 or 1 become active*
+ Added parameter '--start-script-delay' which delays mining for x seconds after a0 or a1 startup script was executed
V1.1.2+ Added algorithm 'sha256dt' (NOVO coin) for CPU/GPU mining, fee 0.85%
+ Added ETHASH/ETCHASH + SHA256DT dual mining mode
+ Added AUTOLYKOS2 + SHA256DT dual mining mode
+ Lowered devfee for 'sha512_256d_radiant' algorithm to 0.85% (CPU/GPU)
+ Reworked auto-tune procedure for GPU's
+ Added parameter '--gpu-disable-interleaving' which disables interleaving of threads (only when same GPU runs 2+ threads) - might get better hashrate in some cases
+ --gpu-buffer-mode 1 should work more stable on 4GB GPU's now
+ Bug fixes & minor improvements
V1.1.1+ Added algorithm 'evrprogpow' (EVRMORE coin) for CPU/GPU mining, fee 0.85%
+ Performance increase on 'cryptonight_gpu' algorithm for RDNA/RDNA2 GPU's
+ Performance increase on 'sha512_256d_radiant' algorithm for RDNA2 GPU's
+ Performance increase on 'lyra2v2_webchain' algorithm for GPU's
+ Progpow algorithms bugfixes [kawpow, firopow, epic, sero, veil, veriblock, zano]
+ Added parameter '--force-msr-tweaks' which forces usage of MSR tweaks for CPU mined algorithm/s *
+ Added support for gfx1036
+ Fixed detection of RX550 GPU's on newer AMD drivers
V1.1.0+ Performance increase on 'sha512_256d_radiant' algorithm for GPU's
+ Small performance increase on 'sha512_256d_radiant' algorithm in DUAL mining modes [ ETHASH/ETCHASH/AUTOLYKOS2 ]
V1.0.9+ Added algorithm 'pufferfish2bmb' for Polaris/Vega cards
+ Performance increase on 'sha512_256d_radiant' algorithm for GPU's
+ Reworked ZIL mining modes*
+ Added automatic caching of ZIL DAG for ETHASH/ETCHASH + ZIL (if GPU has enough VRAM to hold both DAG's)
+ Added nicehash compatibility for algorithm 'verushash'
+ Added parameter '--disable-auto-affinity'
+ Bug fixes
V1.0.8+ Added algorithm 'blake3_ironfish' (IRONFISH coin) for CPU/GPU mining, fee 0.85% *
+ Added ETHASH/ETCHASH + BLAKE3_IRONFISH dual mining mode
+ Added AUTOLYKOS2 + BLAKE3_IRONFISH dual mining mode
+ Added algorithm 'pufferfish2bmb' for RDNA cards [ 5xxx ]
+ Performance increase on 'autolykos2' algorithm for RX5700/XT GPU's
+ Small performance increase on 'kaspa' algorithm for RDNA cards [ 5xxx ]
+ Algorithm 'autolykos2' possible fix for situation when miner isn't creating dataset
+ Algorithm 'autolykos2' now uses 1 thread per GPU as default (was 2) - hashrate should be more stable
+ Possible fix for miner crashing when it's trying to reconnect to the pool
V1.0.7+ Added algorithm 'pufferfish2bmb' (BMB - Bamboo) for GPU mining [ rdna2 only ], fee 1.00%
+ Small performance increase on 'pufferfish2bmb' algorithm for CPU's
+ Reduced devfee for 'autolykos2' (ERGO) to 1.00%
+ Possible fix for 'Can't switch to algorithm 1' issue when using --multi-algorithm-job-mode 3
+ Bug fixes
V1.0.6+ Added algorithm 'pufferfish2bmb' (BMB - Bamboo) for CPU mining, fee 1.00%*
+ Algorithm 'xdag' is now compatible with the new XDAGj network protocol
V1.0.5+ Added algorithm 'sha512_256d_radiant' (RAD - Radiant Layer One) for CPU/GPU mining, fee 1.00%
+ Added ETHASH/ETCHASH + SHA512_256D_RADIANT dual mining mode
+ Added AUTOLYKOS2 + SHA512_256D_RADIANT dual mining mode
+ Fixed issue with dual mining ethash using nicehash mode
+ Added automatic caching of ZIL DAG in dual mining mode [ETH/ETC] (if GPU has enough VRAM to hold both DAG's)
+ Added parameter '--gpu-ethash-dag-cache' to set caching of specific ETH/ETC epoch in dual mining mode [ def. is epoch 0 - ZIL ]
V1.0.4+ Improved performance on all dual mineable algorithms for RDNA2 GPU's
+ Minor bug fixes
V1.0.3+ Added algorithm 'mike' (Vkax coin) for CPU mining, fee 0.85%
+ Significantly improved performance on 'curvehash' algorithm for GPU's
+ Reduced devfee for 'kaspa' and 'heavyhash' to 0.85%
+ Using any of the supported dual mining combinations, automatically enables auto tune
+ Added possibility to disable an algorithm in dual mining mode per GPU*
+ Default value for '--gpu-dual-max-loss' is lowered from 5% to 3%*
V1.0.2+ Added ETHASH/ETCHASH + HEAVYHASH (OBTC/PBTC) dual mining mode
+ Added AUTOLYKOS2 + HEAVYHASH dual mining mode
+ Faster DAG creation on RDNA2 GPU's
+ Possible fix for case when some RDNA/RDNA2 GPU's won't create DAG for ETHASH/PROGPOW algorithms on Linux based OS
V1.0.1+ Added auto tune for dual mining (use --gpu-auto-tune 1 to enable)*
+ Added parameter '--gpu-dual-max-loss' which defines the maximum loss of A0 hashrate we allow while auto tuning in dual mode, defined in percent
+ Minor bug fixes
V1.0.0+ Added ETHASH/ETCHASH + BLAKE3_ALEPHIUM dual mining mode
+ Added AUTOLYKOS2 + BLAKE3_ALEPHIUM dual mining mode
+ Fixed ETHASH/ETCHASH + KASPA mining on nicehash
+ Added parameter '--gpu-table-slow-build' which slows down DAG/Datatable creation for ETHASH/ETCHASH/UBQHASH/PROGPOW/AUTOLYKOS2 algorithms (might help in avoiding crash)
+ Parameter '--gpu-dual-mode' isn't needed anymore, miner will auto check if selected algorithms are eligible for dual mining
+ Fixed a few bugs related to dual mining mode
V0.9.9+ Improved performance of KASPA mining in dual mode for ETH/ETC+KASPA and AUTOLYKOS2+KASPA for some GPU's
+ Added algorithm 'curvehash' for GPU mining
+ Fixed compatibility of KawPow with miningpoolhub pool
V0.9.8+ Added ETHASH/ETCHASH + KASPA dual mining mode
+ Added AUTOLYKOS2 + KASPA dual mining mode
+ Performance increase on 'curvehash' algorithm for CPU ( up to ~40% )
+ Added parameter '--gpu-dual-mode' which must be used to enable the new dual mining mode
+ Upgraded command line parser*
+ Bug fixes
V0.9.7+ Performance increase on 'kaspa' algorithm for RDNA2 GPU's
+ Performance increase on 'heavyhash' algorithm for RDNA2 GPU's
+ Lower power consumption on 'kaspa' algorithm for RDNA2 GPU's
+ Lower power consumption on 'heavyhash' algorithm for RDNA2 GPU's
+ Added limited support for some algorithm's on Vega's (gfx900) for drivers newer than 20.40 (Linux - ROCm) *
+ Added GPU power reading capability for Polaris/Vega on Windows
+ OpenCL variables will be now set automatically from miner
V0.9.6+ Added algorithm 'kaspa' (KAS - Kaspa coin) for CPU/GPU mining, fee 1.00%
+ Small performance increase on 'heavyhash' algorithm for RDNA2 GPU's
+ Lower power consumption on 'heavyhash' algorithm for RDNA2 GPU's
+ Minor bug fixes
V0.9.5+ Added algorithm 'yescryptr8' for GPU mining, fee 0.85%
+ Added algorithm 'yescryptr16' for GPU mining, fee 0.85%
+ Added algorithm 'yescryptr32' for GPU mining, fee 0.85%
+ Added algorithm 'frkhash' (Expanse's next algorithm) for CPU/GPU mining, fee 0.85%
+
Lowered devfee for 'autolykos2' algorithm to 1.5%+ Lowered devfee for 'blake3_alephium' algorithm to 0.85% (CPU/GPU)
+ Small performance increase on 'autolykos2' algorithm for RDNA2 GPU's
+ Small performance increase on 'dynamo' algorithm for GPU's
+ A little bit faster dataset creation on 'autolykos2' algorithm for some GPU's
+ A little bit lower power consumption on 'autolykos2' algorithm for Ellesmere GPU's
+ A little bit lower power consumption on 'ethash' algorithm for RDNA2 GPU's
+ A little bit lower power consumption on 'etchash' algorithm for RDNA2 GPU's
+ If using --cpu-threads parameter, affinity is now auto set for CPU's with 64+ threads too
+ Added parameter '--set-console-title' (Windows only) [set custom title to miner console window]
+ Added parameter aliases for --algorithm, --cpu-threads, --password, --pool, --wallet ( -a, -t, -p, -o, -u )
+ Parameter '--diff-factor' now accepts values in decimal format too
+ Removed support for older GPU's (pitcairn, tahiti, hawaii, fiji, tonga)
+ Minor bug fixes
V0.9.4+ Added algorithm 'sha3d' (Bsha3, Kylacoin, Yilacoin) for CPU/GPU mining, fee 0.85%
+ Added algorithm '0x10' (CHOX - ChainOX) for CPU/GPU mining, fee 0.85%
+ Performance increase on 'curvehash' algorithm (Pulsar coin) ( ~25% )
+ Removed 'astrobwt' algorithm
+ Removed parameter '--gpu-cn-mode'
+ Fixed issue [
https://github.com/doktor83/SRBMiner-Multi/issues/100 ]
V0.9.3+ Performance increase on 'curvehash' algorithm (Pulsar coin) (up to ~40% on some CPU's)
+ Removed algorithm 'argon2id_ninja'
+ Minor bug fixes
V0.9.2+ Added algorithm 'dynamo' (DYNAMO - Dynamo coin) for GPU mining
+ Algorithm 'dynamo' supports only 'pool' mode (yiimp stratum compatibility removed)
+ Lowered devfee for 'dynamo' algorithm to 1% (CPU/GPU)
+ Added parameters '--gpu-progpow-safe' and '--gpu-dynamo-experimental'
V0.9.1+ Added algorithm 'dynamo' (DYNAMO - Dynamo coin) for CPU mining, fee 3.00% (~ 20x-24x (+2000%) faster than the available public miner)
+ Small performance increase on 'blake3_alephium' algorithm for CPU's with AVX2
+ Added '--gpu-auto-tune 3' mode (auto tuning goes through every algorithm, but tuning one at a time - not all simultaneously)
+ If creating DAG/Dataset but mining multiple algorithms, miner now pauses work on other algorithms while the DAG/Dataset is created
+ Possible fix for 'not connected to pool' bug that appeared in previous version (0.9.0)
+ Better auto setup values for eth/etc + alph 'dual' mining
+ Added a workaround for 'blake3_alephium' algorithm pools that send both set_difficulty and set target in job
+ Minor bug fixes
V0.9.0+ Added algorithm 'blake3_alephium' (ALPH - Alephium coin) for CPU/GPU mining, fee 1.00%
+ Added algorithm 'xdag' (XDAG - Dagger coin) for CPU mining, fee 1.00%
+ Fixed broken 'yespower' algorithms (broke in previous 0.8.9 version)
+ Rewrote miner restarting mechanism on Windows
+ Removed algorithm 'rx2'
+ Bug fixes
V0.8.9+ Added algorithm 'randoml' (LOZZ - Lozzax coin) for CPU mining, fee 0.85%
+ Performance increase on 'ghostrider' algorithm with dynamic thread management
+ Performance increase on 'verushash' algorithm for CPU's with AES
+ Performance increase on 'scryptn2' algorithm
+ MSR tweaks are now allowed for every CPU mineable algorithm
+ Dataset for 'autolykos2' algorithm is now created differently, so hopefully video driver won't time-out on slower gpu's
+ Added file Help\Tdr_Fix\tdr_fix.reg for Windows, to increase driver time-out value (helps with DAG/dataset creation)
+ Removed algorithm 'eaglesong'
+ Removed algorithm 'kadena'
+ Removed algorithm 'bl2bsha3'
+ Removed algorithm 'phi5'
+ Removed algorithm 'cryptonight_cache'
+ Removed algorithm 'cryptonight_heavyx'
+ Minor bug fixes
V0.8.8+ Added socks5 proxy support (--proxy parameter)+ Added algorithm 'argon2d_16000' (ADOT - Alterdot coin) for CPU/GPU mining, fee 0.85%
+ Performance increase on 'heavyhash' algorithm for Vega GPU's (up to ~13%)
+ Performance increase on 'argon2id_chukwa2' algorithm for RDNA/RDNA2 GPU's (up to ~12%) & lower power consumption
+ Performance increase on 'argon2d_dynamic' algorithm for RDNA/RDNA2 GPU's (up to ~45%) & lower power consumption
+ Removed devfee for 'yespoweric' algorithm
+ Removed devfee for 'yespowerlitb' algorithm
+ Removed devfee for 'yespowerres' algorithm
+ If using '--multi-algorithm-job-mode 3' miner now auto sets --max-no-share-sent to 45 minutes if no other value was set
+ Rewrote restarting mechanism on Linux so it shouldn't spawn a new process anymore on miner auto restart
+ Minor bug fixes
V0.8.7+ Fixed hashrate regression on 'heavyhash' algorithm for Navi cards
+ Fixed 'progpow' algorithms that got broken with previous release (0.8.6)
V0.8.6+ Performance increase on 'heavyhash' algorithm for Polaris GPU's up to ~10%
+ Performance increase on 'heavyhash' algorithm for VEGA GPU's ~5%
+ Fixed 'heavyhash' algorithm for RX6500/6600/6700 GPU's
+ Fixed detection of GPU's on some linux systems
V0.8.5+ Performance increase on 'heavyhash' algorithm for VEGA/RDNA/RDNA2 GPU's
+ Fixed 'verushash' algorithm 'invalid solution version' error
V0.8.4+ Performance increase on 'heavyhash' algorithm for GPU's
+ Fixed display of hashrate while doing gpu auto tune process
+ Changed GPU temperature to show 'edge' value instead of 'hotspot'
V0.8.3+ Performance increase on 'heavyhash' algorithm for GPU's (up to ~20% on some cards)
+ Fixed issue with recognising some GPU's on newer drivers (broken since v0.8.1)
+ Reworked hashrate reporting/stats - now reporting average for 1 min / 1 hr / 6 hr / 12 hr (in API too)
V0.8.2+ Added possibility to preload dataset/s on 'autolykos2' algorithm with '--gpu-autolykos2-preload' parameter (even on 4Gb cards!)
+ Little faster dataset creation on some GPU's
+ Job notifications are now displayed in console less frequently, unless extended log is enabled
+ Reverted 'autolykos2' kernels for hawaii, tonga and fiji to the ones from ver. 0.7.3
+ Bug fixes in algorithm switching mode ('--multi-algorithm-job-mode 3')
V0.8.1+ Added algorithm 'firopow' (FIRO - Firo coin) for CPU/GPU mining, fee 0.85%
+ Added algorithm 'kawpow' (RVN - Raven coin) for CPU/GPU mining, fee 0.85%
+ Added algorithm 'progpow_sero' (SERO - Super Zero coin) for CPU/GPU mining, fee 0.85%
+ Added algorithm 'progpow_veil' (VEIL - Veil coin) for CPU/GPU mining, fee 0.85%
+ Added algorithm 'progpow_zano' (ZANO - Zano coin) for CPU/GPU mining, fee 0.85%
+ Added algorithm 'progpow_veriblock' (VBK- Veriblock coin) for CPU/GPU mining, fee 0.85%
+ Added algorithm 'progpow_epic' (EPIC - EpicCash coin) for CPU/GPU mining, fee 0.85%
+ Added algorithm 'astrobwt' (DERO - Dero coin) for CPU mining, fee 0.85%
+ Added algorithm 'minotaurx' (LCC - LiteCoin Cash coin) for CPU mining, fee 0.85%
+ Lowered devfee for 'lyra2v2_webchain' algorithm to 0.85%
+ Small improvements on 'autolykos2' algorithm for RX550 & RX560 GPU's
+ Added shares statistics per GPU ( accepted | rejected | gpu validation errors )
+ Added watchdog for CPU workers (detect if a cpu thread stops hashing)
+ Added parameter '--gpu-progpow-mode' (which progpow program to use)
+ Added parameter '--gpu-progpow-preload' (how many periods to pre-create)
+ Fixed crashing on Ryzen 3000 series CPU's on 'autolykos2' algorithm
+ Fixed compatibility with p2p-spb.xyz P2P pools
+ Fixed 'Internet not found' issue on some linux distributions
+ Changed default value for '--max-no-submit-responses' parameter from 0 to 5
+ Renamed parameter '--disable-gpu-watchdog' to '--disable-worker-watchdog'
+ Reduced miner binary size (Windows)
+ To fix miner disconnects on 'autolykos2' with 'WoolyPooly' pool, try --keepalive true
+ Minor bug fixes
V0.8.0+ Added algorithm 'randomgrft' (GRFT - Graft coin) for CPU mining, fee 0.85%
+ Performance increase on 'ethash' algorithm for RX6800/6900 GPU's
+ Performance increase on 'etchash' algorithm for RX6800/6900 GPU's
+ Performance increase on 'ubqhash' algorithm for RX6800/6900 GPU's
+ Performance increase on 'verthash' algorithm for RX6800/6900 GPU's
+ Performance increase on 'heavyhash' algorithm for RX6800/6900 GPU's
+ Performance increase on 'autolykos2' algorithm on ZEN2+ AMD CPU's (up to ~90%) (*)
+ Fixed 'cryptonight_gpu' algorithm for RDNA/RDNA2 GPU's
+ Fixed 'cryptonight_xhv' algorithm for RDNA/RDNA2 GPU's
+ Added GPU power consumption details to stats & api
+ Decreased time needed for algorithm switch when using --multi-algorithm-job-mode 3 with cpu mining
+ Minor bug fixes
V0.7.9+ Added algorithm 'cosa' (COSA - Cosanta coin) for CPU mining, fee 2.0%
+ Fixed hashrate regression on 'heavyhash' algorithm for Navi cards
V0.7.8+ Added algorithm 'circcash' for GPU mining, fee 0.85%
+ Performance increase on 'heavyhash' algorithm on GPU's (~15-25%)
+ Performance increase on 'verushash' algorithm on CPU's supporting SSE4.2 and AES (~4%)
+ Added parameter '--gpu-manual-tuning' for real time editing of memory timings (check Help\Gpu_Manual_Tuning.txt)
+ Added parameter '--log-file-mode' (check Help\Cmd_Common_Parameters.txt)
+ Fixed auto setup on Ethash algorithm for Navi/Navi2 cards that broke in previous version
+ Removed devfee for 'randomwow' algorithm
+ Removed devfee for 'bl2bsha3' algorithm
+ Removed devfee for 'eaglesong' algorithm
+ Removed devfee for 'k12' algorithm
+ Removed devfee for 'kadena' algorithm
+ Removed devfee for 'minotaur' algorithm
+ Minor bug fixes
V0.7.7+ Added algorithm 'lyra2v2_webchain' (MINTME - MintMe.com coin) for CPU/GPU mining, fee 2%
+ Added algorithm 'ghostrider' (RTM - Raptoreum) for CPU mining, fee 0.85%
+ Added algorithm 'cryptonight_turtle' for CPU/GPU mining, fee 0.85%
+ Added algorithm 'randomyada' (YDA - Yada coin) for CPU mining, fee 0.85%
+ Added algorithm 'yespowerarwn' (ARWN - Arowana coin) for CPU mining, fee 0.85%
+ Better auto setup for 'yespower' algorithms
+ Removed devfee for 'cryptonight_cache' algorithm
+ DevFee for 'heavyhash' algorithm lowered to 1%
V0.7.6+ Fixed auto-tune option for 'autolykos2' algorithm that broke in previous version
+ Fixed hashrate regression on 'autolykos2' algorithm for Baffin, Hawaii, Tonga, Fiji cards
+ Small improvements on 'ethash' algorithm
+ Small improvements on 'etchash' algorithm
+ Added possibility for escaping separator characters in --password field with # (use #; and #!)
+ Minor bug fixes
V0.7.5+ Fixed hashrate for 'autolykos2' algorithm on RDNA and RDNA2 GPU's that broke on previous version (0.7.4)
+ Fixed 'autolykos2' algorithm for Tonga, Fiji and Hawaii GPU's that broke on previous version (0.7.4)
V0.7.4+ Dataset creation for 'autolykos2' algorithm faster
+ Small improvements on 'autolykos2' algorithm & lower power consumption on Windows OS
+ Small improvements on 'ethash' algorithm
+ Small improvements on 'etchash' algorithm
+ --gpu-tweak-profile and --gpu-boost should now work with latest AMD drivers
+ Added parameter '--gpu-buffer-mode', can be used with ZIL dual mining (check Help\Other\Dual-mining-ZIL.txt)
+ Added '--gpu-ethash-mode 3' for older cards, no DAG is created on Ethash, Etchash (use it if you feel really lucky)
+ Changed the way how 'ignored jobs' are displayed. If you want to see 'ignored job' messages, you need to enable extended logging
+ More bug fixes with ZIL 'dual' mining
+ Minor bug fixes
V0.7.3+ Small improvement on 'cryptonight_xhv' algorithm for some GPU's
+ Fixed '--gpu-off-temperature' parameter
+ Fixed bugs with 'dual' mining ZIL + any other algorithm (check Help/Other/Dual-mining-ZIL.txt)
+ Removed parameters '--gpu-target-temperature' and '--gpu-target-fan-speed' - use external application instead
+ Minor bug fixes
V0.7.2+ Added algorithm 'heavyhash' (oBTC - Optical Bitcoin) for GPU mining, fee 2.5%
+ Dataset creation for 'autolykos2' algorithm on 'ellesmere' GPU's faster ~3%
+ DevFee for 'verthash' algorithm lowered to 1%
+ DevFee for 'rx2' algorithm lowered to 1%
+ Parameter '--disable-workers-ramp-up' changed back to '--enable-workers-ramp-up', so default value of ramp-up is now disabled
+ Api doesn't report 0 h/s anymore while creating dataset for 'autolykos2' algorithm, so HiveOs shouldn't trigger a restart procedure
+ Added parameter '--max-no-submit-responses' (for details check --help )
+ Minor bug fixes
V0.7.1+ Added algorithm 'heavyhash' (oBTC - Optical Bitcoin) for CPU mining, fee 0.85%
+ Added algorithm 'yespowermgpc' (MagPieCoin) for CPU mining, fee 0.85%
+ Small improvements on 'autolykos2' algorithm
+ Fixed crash on 'panthera' algorithm on non-ryzens
+ Minor bug fixes
V0.7.0+ Reduced power consumption on 'autolykos2' algorithm for Ellesmere GPU's ~2-3%
+ Reduced power consumption on 'verthash' algorithm for Ellesmere GPU's ~5%
+ Reduced power consumption on 'verthash' algorithm for Vega GPU's ~10%
+ Performance increase on 'verthash' algorithm for Vega GPU's ~3%
+ Performance increase on 'verthash' algorithm for CPU's ( ~5% )
+ Added parameter '--verthash-dat-path'
+ Fixed 'verthash' algorithm stack smash issue
+ Fixed watchdog not triggering on dead GPU issue
+ Fixed crash on 'panthera' algorithm
+ Removed parameters : --gpu-watchdog-disable-mode, --watchdog-rounds
+ Minor bug fixes
V0.6.9+ Added algorithm 'verthash' for CPU & GPU mining, fee 1.25%
+ Performance increase on 'autolykos2' algorithm on GPU's (~1-6%)
+ Performance increase on 'autolykos2' algorithm on CPU's with AVX2 (run as admin/root) (~25%)
+ Reduced power consumption on 'autolykos2' algorithm on Vega GPU's
+ Small improvements on 'rx2' algorithm
+ Minor bug fixes
V0.6.8+ Added algorithm 'rx2' (LuxCoin) for CPU mining (8GB Ram needed), fee 1.25%
+ Performance increase on 'autolykos2' algorithm on Vega GPU's (~6-9%)
+ Performance increase on 'autolykos2' algorithm on rest GPU's (~3-5%)
+ Added abort mechanism for 'autolykos2' dataset creation on GPU
V0.6.7+ Performance increase on 'autolykos2' algorithm on GPU's
+ Devfee increased on 'autolykos2' algorithm from 1.25% to 2.00%
+ Ethash - added 1 or 2 buffer mode for DAG (manually set with --gpu-ethash-mode, check Help\Cmd_Gpu_Parameters.txt)
+ Minor bug fixes
V0.6.6+ Performance increase on 'autolykos2' algorithm on GPU's
+ Reduced power consumption on 'autolykos2' algorithm on GPU's
+ Faster dataset creation on 'autolykos2' algorithm on GPU's
+ Fixed miner crashing when creating dataset on 'autolykos2' algorithm
+ Fixed miner crashing when running --gpu-auto-tune on 'autolykos2' algorithm
+ Possible fix for 'duplicate share' issue on 'autolykos2' algorithm
+ Fixed 'k12' algorithm
+ Minor bug fixes
V0.6.5+ Huge performance increase on 'autolykos2' algorithm on GPU's (up to ~600%)
+ Huge performance increase on 'autolykos2' algorithm on CPU's with AVX2 (up to ~500%)
+ Added abort mechanism for 'autolykos2' dataset creation on CPU
V0.6.4+ Added algorithm 'autolykos2' (Ergo) for CPU/GPU mining, fee 1.25%
+ Performance increase on 'phi5' algorithm on CPU's with AVX2
+ Removed devfee for 'cryptonight_heavyx' algorithm
+ Bug fixes
V0.6.3+ Added algorithm 'phi5' for GPU mining, fee 0.85%
+ Added algorithm 'yespowertide' (Tidecoin) for CPU mining, fee 0.85%
+ Fixed 'cryptonight_xhv', now it works on coins other than Haven
+ Performance increase on 'phi5' algorithm on CPU
+ Bug fixes
V0.6.2+ Added algorithm 'circcash' (Circcash) for CPU mining, fee 0.85%
+ Added algorithm 'phi5' (Combode) for CPU mining, fee 0.85%
V0.6.1+ Added algorithm 'balloon_zentoshi' (Zentoshi coin) for CPU mining, fee 0.85%
+ 'cryptonight_xhv' kernel small changes, pool side hashrate should be a little higher
+ Auto setup for 'cryptonight_xhv' algorithm is a little more agressive now (if you experience some issues, use --gpu-auto-intensity 1 for lighter settings)
+ Removed parameter '--gpu-worksize'
V0.6.0+ Added experimental support for
RX 6500/6700/6800/6900 AMD devices+ Small performance increase on 'cryptonight_gpu' algorithm
+ Small performance increase on 'curvehash' algorithm
+ Slow start (ramp up) of GPU's on miner start is now on by default
+ Added parameter '--disable-workers-ramp-up'
+ Added parameter '--gpu-extra-config' (check details in Help\Gpu_Tweaking_And_Boost.txt)
+ Removed 'tellor' algorithm
+ Removed 'rainforestv2' algorithm
V0.5.9+ Fixed a bug on 'randomx' algorithm that could cause miner to create invalid shares for some jobs (
Important fix! )
+ Removed algorithm 'cryptonight_bbc'
+ Removed algorithm 'cryptonight_catalans'
+ Bug fixes
V0.5.8+ Increased hashrate on 'curvehash' algorithm ~
10-13%+ Added possibility to dual mine Ethash+Zil, Etchash+Zil (mine ETH-ETC on any pool, check details in Help\Other\Eth-Etc-Zil.txt)
+ Fixed issue with boost/tweak profiles on some systems
+ Fixed issue with 'internet not found' error on some Windows Server systems
+ Fixed issue with disconnections on Mining Rig Rentals (MRR)
+ Added parameter '--a0-is-zil', use it with '--multi-algorithm-job-mode 3' to mine ZIL
+ Added parameter '--diff-factor' which can set the diff multiplier for some algorithms (Zpool->curvehash for ex.)
V0.5.7+ Added algorithm 'curvehash' (Curvehashcoin) for CPU mining,
fee 0.85%+ Added support for older AMD cards (tahiti, pitcairn) on most of the algorithms
+ Removed 'm7mv2' algorithm
+ Removed parameter '--gpu-tweak-unsupported' because it was useless
+ Small fixes
V0.5.6+ Added algorithm 'etchash' (Ethereum Classic) ,
fee 0.65%+ Added algorithm 'randomhash2' (PascalCoin) for CPU mining,
fee 0.85%+ Added algorithm 'scryptn2' (Verium, Bitcoin Subsidium) for CPU mining,
fee 0.85% (run as admin/root for more hashrate)
+ GPU tweaking/boosting now available on both Windows & Linux
+ Extended GPU tweaks support with R9 290/380/390 cards
+ Added parameter '--gpu-tweak-unsupported'
+ Added parameter '--gpu-boost'
+ Added parameter '--msr-use-preset'
+ Bug fixes
V0.5.5+ Added algorithm 'argon2id_ninja' fee 0.85%
+
DevFee for 'ethash' algorithm lowered to 0.65%+ DevFee for 'ubqhash' algorithm lowered to 0.65%
+ DevFee for 'minotaur' algorithm lowered to 0.85%
+ DevFee for 'randomxl' algorithm removed
+ Small performance increase on cryptonight_xhv algorithm
+ Parameter '--gpu-intensity' now accepts raw-intensity values too, so you can mix them if you want (ex. 12+2048 = intensity 12, raw-intensity 2048)
+ Removed parameter '--gpu-raw-intensity'
+ --multi-algorithm-job-mode 3 for CPU mining now uses number of threads defined for algorithm 1 when algorithm 0 can't be mined
+ Bug fixes
V0.5.4+ Added 'argon2id_chukwa2' algorithm for CPU & GPU (new turtlecoin algorithm)
+ Fixed bug that caused invalid shares sometimes in multi algorithm mode mining
+ Fixed bug that made miner console freeze when holding scrollbar (windows)
+ Changed default value for '--retry-time' from 15 to 5 seconds
+ Minor bug fixes
V0.5.3+ Added 'argon2d_dynamic' for GPU mining
+ Added 'argon2id_chukwa' for GPU mining
+ Added 'cryptonight_cache' CPU & GPU
+ Fixed 'duplicate share' errors with 'ethash' algorithm
+ Less stale shares on 'ethash' algorithm in auto mode
+ Faster 'verushash' on CPU's without AES
+ Proper support for 64+ thread CPU's on Windows
+ More bug fixes
V0.5.2+ Added 'verushash' for GPU mining
+ 'verushash' on CPU optimised a little bit
+ 'ethash' on GPU optimised a little bit
+ Optimised algorithm redirecting with CPU mined algorithms
+ Removed 'MTP' algorithm
+ Bug fixes
V0.5.1+ Added algorithm 'argon2id_chukwa'
+ Added algorithm 'argon2d_dynamic'
+ Added parameter '--miner-priority' to set priority of main miner process
+ Renamed '--cpu-priority' to '--cpu-threads-priority'
+ Faster hashrate refresh interval for CPU workers
+ Fixed (probably) crash when mining with 'randomepic' algorithm
+ Bug fixes
V0.5.0+ Now supporting real MULTI ALGORITHM mining, you can mine up to 4 algorithms at the same time
+ Changed API and WEB stats to be compatible with the new multi algorithm mining functionality
+ Added GPU auto tune functionality
+ A lot of changes in configuration parameters and the way you define them (check Help folder)
+ Updated algorithm 'defyx' to 'panthera'
+ Updated algorithm 'tellor' to work on tellorpool.org, and removed devfee
+ Added algorithm 'cryptonight_ccx'
+ Added algorithm 'cryptonight_xhv'
+ Added algorithm 'cryptonight_gpu'
+ Added algorithm 'cryptonight_upx'
+ Added algorithm 'cryptonight_heavyx'
+ Added algorithm 'verushash'
+ Added new parameters '--gpu-auto-tune', '--multi-algorithm-job-mode', '--cpu-threads-intensity', '--gpu-auto-intensity', '--gpu-cn-mode'
+ Parameter '--gpu-ethash-mode' now has a new mode : 3
+ A lot of bug fixes
You definitely need to check out HELP and EXAMPLES folders because a lot of things changed from previous version!V0.4.7+ Removed devfee for 'blake2s', 'mtp', 'keccak', 'yespoweritc', 'm7mv2', 'cryptonight_catalans', 'cryptonight_talleo' algorithms
+ Lowered 'bl2bsha3' devfee to standard fee (~0.85%)
+ Fixed 'randomx' algorithm when running on 64+ threads
+ Fixed config parameter "cpu_affinity"
V0.4.6+ Fixed 'defyx' algorithm on Intel CPU's (previous version broke it)
+ Hashrate stats (pressing 'h') now shows current hashing speed of CPU, and not the 10 second average
+ Lowered pool reconnection time to 15 sec
+ Added parameter '--gpu-ethash-mode' to cmd parameters
+ Added parameter 'gpu_ethash_mode' to config parameters
+ Added parameter 'ethash_mode' to gpu_conf parameters
+ Added parameter '--disable-cpu-auto-affinity'
V0.4.5+ Added 'randomepic' algorithm (EpicCash RandomX) solo/pool
+ 'ethash' and 'ubqhash' algorithm faster ~1.5% on Vega
+ 'RandomX' algorithm improvements
+ Fixed allocation of 'RandomX' dataset for 1Gb pages (--randomx-use-1gb-pages parameter)
+ Fixed an issue with MSR tweaks not being applied correctly
+ Lowered 'minotaur' algorithm devfee to 2%
+ Fixed crashing of 'minotaur' algorithm on AVX2 capable cpu's
+ '--send-stales' is now set per pool, it accepts true/false. Default is true.
+ 'send_stales' parameter added to pools config file too
+ '--gpu-intensity' option can now be used in combination with auto gpu setup in cmd
+ Improved gpu watchdog
+ Added temporary parameter '--cnpool-bbc-fix' which disables workers if job diff >= 50
+ Minor bug fixes
V0.4.4+ added 'ethash' algorithm
+ added 'ubqhash' algorithm
+ added parameter '--esm' to set ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy)
+ added parameter 'esm' to pools config (ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy))
+ added parameter '--enable-ethash-leak-fix' which tries to workaround AMD driver memory leak when recreating DAG
+ fixed algo switching and tweak_profiles miner freeze bug
+ --gpu-tweak-profile option can now be used with auto gpu setup in cmd
V0.4.3+ Added 'tellor' algorithm (trb.uupool.cn compatible stratum)
+ Improvements on 'minotaur' algorithm
+ Guided setup fixed & simplified
V0.4.2+ Improvements for 4G Ellesmere cards on 'cryptonight_bbc' algorithm
+ Small improvements on 'yespower' CPU algorithms
+ Added parameters 'disable_cpu' and 'disable_gpu' in configuration file
+ Fixed 'handshake' algorithm mining on nicehash
+ Algoswitching now reconnects back to main pool when it gets available
+ Minor bug fixes
V0.4.1+ Added CPU algorithm 'minotaur' (Ring coin)
+ Added CPU algorithm 'yespowerres' (Resistance coin)
+ 2-4% faster 'cryptonight_bb
