Idena is the first Proof-of-Person Blockchain

[robelneo]

This is very strange I have no peers to connect I close my wallet open the Idena folder but I cannot delete the Idenachain db now my wallet is offline for thirty minutes already, I've been running my wallet for three weeks now and this is the first time it happens, very strange.

[1714008837]

1714008837

[shatcs]

Hello, i trying to run idena node on raspberry pi 3b+ with raspbian installed, but after while of synchronizing i get this error "invalid block roots". Please, can someone explain how to fix it.
I build from source with golang go1.13.8.linux-armv6l.tar.gz

Here is cut of output.log:

Code:

INFO [02-25|17:47:04.941] Peer connected                           id=QmTs6nceajfFxHVhMvJJsJGjp1aBdceNbPwosyxoLmUF7C inbound=false
INFO [02-25|17:47:05.237] Peer connected                           id=QmTHDLnNMAp6K8txLmJW6EHUbwoHTGhkEUBCp4gAtpNqKY inbound=false
INFO [02-25|17:47:08.145] Snapshot has been loaded                 component=downloader height=939160
INFO [02-25|17:47:16.506] Full sync will be used                   component=downloader
INFO [02-25|17:47:16.506] All blocks were requested. Wait for applying of blocks component=downloader
INFO [02-25|17:47:16.506] Short session timer has been created     time=2020-03-02T16:30:00+0300
INFO [02-25|17:47:16.507] Start process batch                      component=downloader from=939161 to=939208
INFO [02-25|17:47:23.543] peer has been banned                     id=QmTs6nceajfFxHVhMvJJsJGjp1aBdceNbPwosyxoLmUF7C reason="invalid block roots. Expected=3dd7127a091d5a7a2e01cde47d261ee84d00f3f93d17be632cd2f19f0bf458a8 & 72df4c3d14866ce4c0062b2900aae50b5a1b501572eadbf9e8da8eff7c666b61, actual=15cd2f54a47c62833bdb4a962ed14df2982b6435c703f43372a3f081b245e5b1 & 72df4c3d14866ce4c0062b2900aae50b5a1b501572eadbf9e8da8eff7c666b61"
WARN [02-25|17:47:23.544] Block 939161 is invalid: invalid block roots. Expected=3dd7127a091d5a7a2e01cde47d261ee84d00f3f93d17be632cd2f19f0bf458a8 & 72df4c3d14866ce4c0062b2900aae50b5a1b501572eadbf9e8da8eff7c666b61, actual=15cd2f54a47c62833bdb4a962ed14df2982b6435c703f43372a3f081b245e5b1 & 72df4c3d14866ce4c0062b2900aae50b5a1b501572eadbf9e8da8eff7c666b61 component=downloader
INFO [02-25|17:47:23.544] Peer disconnected                        id=QmTs6nceajfFxHVhMvJJsJGjp1aBdceNbPwosyxoLmUF7C

Edit: Tried to run node on Ubuntu_server18.04amd64 on Virtualbox and it is builded and work great so, im suspecting that it is ARM issue and maybe needed to properly builded with specific options?

[lemonandfriesonetwo]

..........

Edit: Tried to run node on Ubuntu_server18.04amd64 on Virtualbox and it is builded and work great so, im suspecting that it is ARM issue and maybe needed to properly builded with specific options?

You need to use a 64-bit version. There is 64-bit OS for RPi 3, they are experimental but will run on the RPi 3.

[shatcs]

..........

Edit: Tried to run node on Ubuntu_server18.04amd64 on Virtualbox and it is builded and work great so, im suspecting that it is ARM issue and maybe needed to properly builded with specific options?

You need to use a 64-bit version. There is 64-bit OS for RPi 3, they are experimental but will run on the RPi 3.

Hi, if you mean this version, http://cdimage.ubuntu.com/releases/18.04.4/release/ubuntu-18.04.4-preinstalled-server-arm64+raspi3.img.xz then i tried it two days ago and result is same because it is arm64 too.

[lemonandfriesonetwo]

..........

Edit: Tried to run node on Ubuntu_server18.04amd64 on Virtualbox and it is builded and work great so, im suspecting that it is ARM issue and maybe needed to properly builded with specific options?

You need to use a 64-bit version. There is 64-bit OS for RPi 3, they are experimental but will run on the RPi 3.

Hi, if you mean this version, http://cdimage.ubuntu.com/releases/18.04.4/release/ubuntu-18.04.4-preinstalled-server-arm64+raspi3.img.xz then i tried it two days ago and result is same because it is arm64 too.

That one doesn't work.

Try a Gentoo Distro.

Here is one that works on RPi 3: https://github.com/sakaki-/gentoo-on-rpi-64bit/

Gentoo is similar to Linux but there is variance in the commands.

You will also have to install the dependencies to build the Idena node on Gentoo.

[shatcs]

..........

Edit: Tried to run node on Ubuntu_server18.04amd64 on Virtualbox and it is builded and work great so, im suspecting that it is ARM issue and maybe needed to properly builded with specific options?

You need to use a 64-bit version. There is 64-bit OS for RPi 3, they are experimental but will run on the RPi 3.

Hi, if you mean this version, http://cdimage.ubuntu.com/releases/18.04.4/release/ubuntu-18.04.4-preinstalled-server-arm64+raspi3.img.xz then i tried it two days ago and result is same because it is arm64 too.

That one doesn't work.

Try a Gentoo Distro.

Here is one that works on RPi 3: https://github.com/sakaki-/gentoo-on-rpi-64bit/

Gentoo is similar to Linux but there is variance in the commands.

You will also have to install the dependencies to build the Idena node on Gentoo.

Thank for reply, but I doubt that was will help, because this is arm64 not amd64 which is not supported on rpi and i will get the same error. If the issue with ARM, than it must resolved with any os with same arch.
What the dependencies i must install? On ubuntu_server64amd im doing the same, as in raspbian and its worked fine, unlike on rpi.

[lemonandfriesonetwo]

Thank for reply, but I doubt that was will help, because this is arm64 not amd64 which is not supported on rpi and i will get the same error. If the issue with ARM, than it must resolved with any os with same arch.
What the dependencies i must install? On ubuntu_server64amd im doing the same, as in raspbian and its worked fine, unlike on rpi.

Look again. The version of Gentoo I'm recommending will definitely work. My friend runs RPi 3 with it and it works fine.

You would just have to build and install Golang on Gentoo.

[shatcs]

Thank for reply, but I doubt that was will help, because this is arm64 not amd64 which is not supported on rpi and i will get the same error. If the issue with ARM, than it must resolved with any os with same arch.
What the dependencies i must install? On ubuntu_server64amd im doing the same, as in raspbian and its worked fine, unlike on rpi.

Look again. The version of Gentoo I'm recommending will definitely work. My friend runs RPi 3 with it and it works fine.

You would just have to build and install Golang on Gentoo.

Ok, let me clear. This version of gentoo that your friend run's will work with idena node or itself OS? Because im don't feel any problem with OS besides the node.

[TakeItEasy]

Who are these "early investors"?
As far as I understood, there were no ICO, IPO and other garbage.
DNA coins could be obtained only through mining, purchases through the OTC Discord, and the last way - buying on Qtrade. Without any "early investments".

Nobody knows?
It turns out there were some sort of private sale at an unknown price? Why is this information hidden?
What is an interesting way these early investors bought 7 mln coins?

[lemonandfriesonetwo]

Thank for reply, but I doubt that was will help, because this is arm64 not amd64 which is not supported on rpi and i will get the same error. If the issue with ARM, than it must resolved with any os with same arch.
What the dependencies i must install? On ubuntu_server64amd im doing the same, as in raspbian and its worked fine, unlike on rpi.

Look again. The version of Gentoo I'm recommending will definitely work. My friend runs RPi 3 with it and it works fine.

You would just have to build and install Golang on Gentoo.

Ok, let me clear. This version of gentoo that your friend run's will work with idena node or itself OS? Because im don't feel any problem with OS besides the node.

Yes it works and he has Idena node running on it but once you install it you have to make it headless.

Gentoo will turn Rpi 3 into a VPS if you run it headless. You will have to build the node on your RPi 3 via Gentoo.

[fonship]

the more i read the more i love, running its node and so far loved everything.
great job for thinking so much detail around the whole system and ecomonics design

[Crypt0-B]

Who are these "early investors"?
As far as I understood, there were no ICO, IPO and other garbage.
DNA coins could be obtained only through mining, purchases through the OTC Discord, and the last way - buying on Qtrade. Without any "early investments".

Nobody knows?
It turns out there were some sort of private sale at an unknown price? Why is this information hidden?
What is an interesting way these early investors bought 7 mln coins?

What ?!?!?! ooooooooooooooooooooooo
HA ha HA ha HA

1- 36 milion premine. (82% of all coins in hands of team now)
2- 12K coins from invitations
3- 5% of all new emitted coins goes to the team ~ 13k coins each epoch

12k+13k=25k coins each epoch goes to the team. Thats ~10%

Early investors allocation: 7,065,000 DNA
Hidden private presales are one of the main signs of scam.
All trades must always be announced publicly!
 scam scam scam

[Crypt0-B]

36 million premine to 0.1$ price at this moment(i asked to buy from team and they offer me DNA to 0.1$) means 3,6 million . I think is too much for a project like this. So it is a sign of scam for me. DYOR!

Everything becomes clear...
and now very ez math for everyone
not 36, but 7

7,000,000*0.1 = 700,000 $

These IDENA scammers secretly sold coins worth 700k $

not bad...not bad...

[shatcs]

Thank for reply, but I doubt that was will help, because this is arm64 not amd64 which is not supported on rpi and i will get the same error. If the issue with ARM, than it must resolved with any os with same arch.
What the dependencies i must install? On ubuntu_server64amd im doing the same, as in raspbian and its worked fine, unlike on rpi.

Look again. The version of Gentoo I'm recommending will definitely work. My friend runs RPi 3 with it and it works fine.

You would just have to build and install Golang on Gentoo.

Ok, let me clear. This version of gentoo that your friend run's will work with idena node or itself OS? Because im don't feel any problem with OS besides the node.

Yes it works and he has Idena node running on it but once you install it you have to make it headless.

Gentoo will turn Rpi 3 into a VPS if you run it headless. You will have to build the node on your RPi 3 via Gentoo.

Ok, will try. Thank you.

[Crypt0-B]

yep, "stupid beach" Mateusz, it's call hidden...



What is written on Whitepaper is what is supposed to be done.
But where is the public announcement of the start of pre-sales? Nowhere.
Where is the publicly announced pre-sale price? Nowhere.

Presale was hidden, but was supposed to be public.

scam scam scam

[Railai]

I saw a lot of users quoting my posts and sending me PM's that they agree with me that IDENA is a scam crypto.

I never said any similar to that nor was my intention. I love the idea of IDENA and how the development goes, but when the team has already 36M coins and they are still having a bigger number of invites than regular users, they can afford just to give them away even if the user won't register/do the flips and now they change the system in such a way that verified members can stop giving invites because they receive a reward, it doesn't look good.

Of course, there was a sell and even if it was sold at 1$ each, investors sale or whatever; what they created so far is fantastic and the work it is being done all the time has to be in our appreciation.

So far, crypto world is not anymore about tech, and it is only about funding. I get the part that is still testnet and things are changing, but don't destroy the circulating supply, give also to others better opportunities to become members of the network

[TakeItEasy]

To be honest, I have been watching this project from the very beginning of creating a topic on this forum, because I also liked the idea.
But I had to admit, I didn't see a single word about the fact that coins can be bought somewhere, besides OTC discord, because there really were no public announcements about 7kk coins presale, price, etc.

[Railai]

To be honest, I have been watching this project from the very beginning of creating a topic on this forum, because I also liked the idea.
But I had to admit, I didn't see a single word about the fact that coins can be bought somewhere, besides OTC discord, because there really were no public announcements about 7kk coins presale, price, etc.

Why it has to be public? Maybe someone with tons of money came to them and gave a too good offer...Why they should have at least the headache of having a public sale where everyone comes to them and ask 1mil questions..

[TakeItEasy]

To be honest, I have been watching this project from the very beginning of creating a topic on this forum, because I also liked the idea.
But I had to admit, I didn't see a single word about the fact that coins can be bought somewhere, besides OTC discord, because there really were no public announcements about 7kk coins presale, price, etc.

Why it has to be public? Maybe someone with tons of money came to them and gave a too good offer...Why they should have at least the headache of having a public sale where everyone comes to them and ask 1mil questions..

Why should pre-sale be public?)
So that everyone had equal rights to purchase. So that everyone knows what price the developers were getting.
What for ? In order to know if they want to take part in the mining of this coin, in support of this coin, whether they will buy this coin in the future on the Exchange, etc.

They could set a minimum purchase threshold to avoid a million offers. That's all. Assume a minimum purchase amount of 50k/100k/25k DNA. Many ICOs do this. And no problem.

[othell_rogue]

First I am not a FUDer, and I am also part of the project nodes but asking for Donations to pay the Translations is not looking good to me.
With a "Total premint size: 36,000,000 DNA" and "5% Foundation wallet (DAO)"- extracted from medium is a shame to ask for donations imo.