[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs

[Biffa]

Mine also came with the defaults set to Max Unit Power 100W

[1713877597]

1713877597

[1713877597]

1713877597

[1713877597]

1713877597

[1713877597]

1713877597

[Biffa]

already updated before it became inaccessible.

just installing google remote now.

i sent you a skype request a few minutes ago

e2a - myminer does not seem to work at all now. i can see neither SPx



2nd edit - Much Thanks to Zvi, 15minutes and im at least stable now at 1.5TH/s


needed to up the max watts & fan speed (its quite warm here)

Did you set max watts to 288?

[edit]Trying 288

I'm using an EVGA 1300W G2 so power shouldn't be an issue.

Gone from 1.3x to 1.5x 1.665TH and climbing now, back temperatures gone from 37 to 67°C 77°C!

[edgar]

sorry Biff, yea 288.

fan up to 100

Start Voltage - 0.695

Temp Front / Back T,B
    36 °C / 84,80 °C

1.552 TH/s

[Guy Corem]

...
Gone from 1.3x to 1.5x 1.665TH and climbing now, back temperatures gone from 37 to 67°C 77°C!

Keep your room cozy and warm in the winter ...

[Biffa]

...
Gone from 1.3x to 1.5x 1.665TH and climbing now, back temperatures gone from 37 to 67°C 77°C!

Keep your room cozy and warm in the winter ...

I am going to have to do something about the fan though, this thing is loud! Louder than all my other miners combined.

If I can't do anything about it I'll have to sell it I think

[zvisha]

...
Gone from 1.3x to 1.5x 1.665TH and climbing now, back temperatures gone from 37 to 67°C 77°C!

Keep your room cozy and warm in the winter ...

I am going to have to do something about the fan though, this thing is loud! Louder than all my other miners combined.

If I can't do anything about it I'll have to sell it I think

What is the fan settings?

[Tupsu]

Anybody hit near 1.7TH with the SP20?

YES:
I was hoping for more of the SP20.
I was misled widh RockerBox ASIC Specifications - Power Consumption 0.34 W/GHs in typical corner.

My miner hashing 1737 Gh/s , power consumption 1135W
PSU EVGA SUPERNOVA G2 1300W

[stan258]

Anybody hit near 1.7TH with the SP20?

YES:
I was hoping for more of the SP20.
I was misled widh RockerBox ASIC Specifications - Power Consumption 0.34 W/GHs in typical corner.

My miner hashing 1737 Gh/s , power consumption 1135W
PSU EVGA SUPERNOVA G2 1300W

You are right on target??

[Tupsu]

You are right on target??

Mining Rate: 1733.14Ghs


Temp Front / Back T,B
    26 °C / 82,80 °C
Fan Speed
    80
Start Voltage
    0.68 / 0.68 / 0.68 / 0.68
Max Voltage
    0.79
Max Watts
    288 / 288 / 288 / 288




Best Share
    91134657
Miner time
    Wed, 05 Nov 2014 12:41
System Uptime
    13 hr 33 min 52 sec
CGMiner Uptime
    13 hr 32 min 51 sec

[raskul]

well done on the specs SP

in addition, i should say that I am still more than happy with my sp10's all of which are running at 1.2TH/s with a max wattage of 833w each.

there's legs yet!   

[Tupsu]

well done on the specs SP

in addition, i should say that I am still more than happy with my sp10's all of which are running at 1.2TH/s with a max wattage of 833w each.

there's legs yet!  

Antminer S4
1.95 Th/s  and 1380W

KNC Neptune

3400 GH/s and 2090W

I was hoping that the SP20 to be better as Neptune.

[Marvell1]

is this the same issue with the SP30s where it needs to be on 240v vs 110v  ? what voltage are these boxes running on ?

this has me worried 1k power use at 1.7 TH is very sub-optimal

[Biffa]

...
Gone from 1.3x to 1.5x 1.665TH and climbing now, back temperatures gone from 37 to 67°C 77°C!

Keep your room cozy and warm in the winter ...

I am going to have to do something about the fan though, this thing is loud! Louder than all my other miners combined.

If I can't do anything about it I'll have to sell it I think

What is the fan settings?

Anything from 60% up is louder than a KnC Jupiter or Dragon, louder even than a 6 GPU X11 rig.

I'm away from the unit at the moment but I'll do some sound measurements when I get a chance.

I thought it would be quiet, I'd hate to have one in the house.

I'm want to make too big a deal of it because I should have known really judging by the noise of the SP10 and SP30, I just would have thought knowing that this was designed as a home miner you would have designed it with two quieter fans in a push/pull setup rather than one Delta type 120x38mm Fan.

Its also not wind noise, its the mechanical noise of the fan itself. I've got a lot of fans here I'll find something that works.

[Koontas]

...
Gone from 1.3x to 1.5x 1.665TH and climbing now, back temperatures gone from 37 to 67°C 77°C!

Keep your room cozy and warm in the winter ...

I am going to have to do something about the fan though, this thing is loud! Louder than all my other miners combined.

If I can't do anything about it I'll have to sell it I think

What is the fan settings?

Anything from 60% up is louder than a KnC Jupiter or Dragon, louder even than a 6 GPU X11 rig.

I'm away from the unit at the moment but I'll do some sound measurements when I get a chance.

I thought it would be quiet, I'd hate to have one in the house.

I'm want to make too big a deal of it because I should have known really judging by the noise of the SP10 and SP30, I just would have thought knowing that this was designed as a home miner you would have designed it with two quieter fans in a push/pull setup rather than one Delta type 120x38mm Fan.

Its also not wind noise, its the mechanical noise of the fan itself. I've got a lot of fans here I'll find something that works.

Curious to see what you come up with.

I'm geting 1389gh/s right now on my SP20 with the settings at 200w.  When I bumped it up to 288 it shut off my 2 x 750w Thermaltake PSU's so I may grab something a little better.

[wpgdeez]

...
Gone from 1.3x to 1.5x 1.665TH and climbing now, back temperatures gone from 37 to 67°C 77°C!

Keep your room cozy and warm in the winter ...

I am going to have to do something about the fan though, this thing is loud! Louder than all my other miners combined.

If I can't do anything about it I'll have to sell it I think

What is the fan settings?

Anything from 60% up is louder than a KnC Jupiter or Dragon, louder even than a 6 GPU X11 rig.

I'm away from the unit at the moment but I'll do some sound measurements when I get a chance.

I thought it would be quiet, I'd hate to have one in the house.

I'm want to make too big a deal of it because I should have known really judging by the noise of the SP10 and SP30, I just would have thought knowing that this was designed as a home miner you would have designed it with two quieter fans in a push/pull setup rather than one Delta type 120x38mm Fan.

Its also not wind noise, its the mechanical noise of the fan itself. I've got a lot of fans here I'll find something that works.

I didn't see that one coming, oh wait I did.

[seriouscoin]

SP-T, did the owner contact you regarding this? :



What is the source of fire? All 5MW miners burned down. I believe he said they're all SP30

[Koontas]

Holy sh*t!!  I shed a tear for them.

 

[seriouscoin]

Holy sh*t!!  I shed a tear for them.

 

Better not pushing your SP20 with some random PSU. Have fire extinguisher near by and get a Nest fire detector (or any smart detector)

[promojo]

WOW.  That is incredible.

[DevonMiner]

Scary picture for sure ...

Brings a whole new meaning to 'Hot aisle/cold aisle'.