CryptoLLC
Newbie
Offline
Activity: 25
Merit: 11
|
|
November 24, 2020, 04:44:23 AM Last edit: November 24, 2020, 11:15:29 PM by frodocooper |
|
I wouldnt want to use any permeneatny adhesive. Im looking to apply solder. What solder do you know I can use for this that can be taken off and on. Also I have a whole bunch of boards that have the same exact errors when I run the test fixture. All the asic are found but I still get a temp sensor error. 1970-01-01 00:00:52 main.c:45:main: Ready for test 1970-01-01 00:00:59 single_board_test.c:2336:get_eeprom_info: get EEPROM info success! 1970-01-01 00:00:59 single_board_test.c:2585:single_board_test: g_test_level 7, pattern_test_time 1 1970-01-01 00:00:59 single_board_test.c:2375:do_single_board_test: Begin test 1970-01-01 00:00:59 fan.c:276:front_fan_power_on: Note: front fan is power on! 1970-01-01 00:00:59 fan.c:288:rear_fan_power_on: Note: rear fan is power on! 1970-01-01 00:00:59 driver-btm-api.c:1165:miner_device_init: Detect 256MB control board of XILINX 1970-01-01 00:00:59 driver-btm-api.c:1106:init_fan_parameter: fan_eft : 0 fan_pwm : 0 1970-01-01 00:01:05 driver-btm-api.c:1090:init_miner_version: miner ID : 805445801c20881c 1970-01-01 00:01:05 driver-btm-api.c:1096:init_miner_version: FPGA Version = 0xB031 1970-01-01 00:01:06 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 1970-01-01 00:01:08 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 1970-01-01 00:01:08 thread.c:807:create_pic_heart_beat_thread: create thread 1970-01-01 00:01:12 power_api.c:228:set_higher_voltage_raw: higher_voltage_raw = 2100 1970-01-01 00:01:12 power_api.c:278:set_to_higher_voltage: Set to voltage raw 2100, one step. 1970-01-01 00:01:14 power_api.c:85:check_voltage_multi: retry time: 0 1970-01-01 00:01:15 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.926828 1970-01-01 00:01:15 power_api.c:53:_get_avg_voltage: average_voltage = 20.926828 1970-01-01 00:01:15 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.93, check voltage passed. 1970-01-01 00:01:15 uart.c:71:set_baud: set fpga_baud to 115200 1970-01-01 00:01:15 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 1970-01-01 00:01:26 driver-btm-api.c:1030:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0 1970-01-01 00:01:29 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003 1970-01-01 00:01:29 driver-btm-api.c:363:set_order_clock: chain[0]: set order clock, stragegy 3 1970-01-01 00:01:29 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 1970-01-01 00:01:29 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 1970-01-01 00:01:29 driver-hash-chip.c:517:set_clock_delay_control: singe chain mode 1970-01-01 00:01:30 temperature.c:320:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218 1970-01-01 00:01:31 temperature.c:488:temp_statistics_show: pcb temp 17~20 chip temp 18~20 1970-01-01 00:01:31 uart.c:71:set_baud: set fpga_baud to 12000000 1970-01-01 00:01:31 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 12000000, chip_divider = 3 1970-01-01 00:01:31 temperature.c:488:temp_statistics_show: pcb temp 18~19 chip temp 19~21 1970-01-01 00:01:31 power_api.c:222:set_working_voltage_raw: working_voltage_raw = 1950 1970-01-01 00:01:31 frequency.c:808:inc_freq_with_fixed_vco: chain = 255, freq = 625, is_higher_voltage = true 1970-01-01 00:01:42 power_api.c:348:set_to_voltage_by_steps: Set to voltage raw 2070, step by step. 1970-01-01 00:01:44 power_api.c:85:check_voltage_multi: retry time: 0 1970-01-01 00:01:45 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.217949 1970-01-01 00:01:45 power_api.c:53:_get_avg_voltage: average_voltage = 20.217949 1970-01-01 00:01:45 power_api.c:71:check_voltage: target_vol = 20.70, actural_vol = 20.22, check voltage passed. 1970-01-01 00:01:45 driver-btm-api.c:666:set_timeout: freq = 625, percent = 10, hcn = 4915, timeout = 7 1970-01-01 00:01:45 power_api.c:306:set_to_working_voltage_by_steps: Set to voltage raw 1950, step by step. 1970-01-01 00:01:50 power_api.c:85:check_voltage_multi: retry time: 0 1970-01-01 00:01:52 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.097436 1970-01-01 00:01:52 power_api.c:53:_get_avg_voltage: average_voltage = 19.097436 1970-01-01 00:01:52 power_api.c:71:check_voltage: target_vol = 19.50, actural_vol = 19.10, check voltage passed. 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 0 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:52 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 14, reg = 28 1970-01-01 00:01:53 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 14, reg = 1 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 0 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:53 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 10, reg = 28 1970-01-01 00:01:54 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 10, reg = 1 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 0 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:54 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 54, reg = 28 1970-01-01 00:01:55 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 54, reg = 1 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 0 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:55 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 register.c:185:read_asic_reg_with_addr: read asic reg timeout: expect chain = 0, chip = 50, reg = 28 1970-01-01 00:01:56 temperature.c:744:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1 1970-01-01 00:01:56 single_board_test.c:1659:wait_warm_up: temper sensor bad
I have this same exact error for over 10 boards. Also the the error states chip 50, 54, 10, 14 as being bad chips but I get this same exact error on many boards. Cant all have the same exact chips with the same exact error. What could this be? My boards are in 100% perfect condition and all the sudden stopped working one day. Showed temp sensor errors and then stopped working completely. Running this test fixture is showing temo sensor is bad but that cant be either. Something is wrong and I dont know how to find the problem. Please advise. Thank you.
|