mark421421 (OP)
Jr. Member
Offline
Activity: 44
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 17, 2020, 02:49:25 PM Last edit: February 18, 2020, 12:43:13 AM by frodocooper |
|
Hi All, On Friday my 8 x S9 SE's arrived (2 weeks late). I set them all up and had lots of issues tripping off so I updated the firmware to latest version. They are runing in replace of S9's so the room is a good temperature and there is plenty of air flow. They don't seem to be as stable as the S9, they seemed to have settled down except one. But they seem to be a lot more sensitive!! https://imgur.com/sG4HVVDhttps://imgur.com/2q2z1gbPlease does anyone know what the issues are. Thanks Mark. Kernal Log Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25672K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12632K (cceab000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad block at 0x000002420000 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1851394925 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 73663710-62FC-4E5F-B9BF-73156C947232, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 805982438 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A8244423-2866-4E07-A0A7-67EFDFD50830, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2020-02-17 14:09:31.558] httpListenThread start ret=0 [2020-02-17 14:10:01.560] start listen on 6060 ... 2020-02-17 14:09:31 driver-btm-soc.c:6520:bitmain_soc_init: This is Antminer S9 SE scan user version 2020-02-17 14:09:31 driver-btm-soc.c:6526:bitmain_soc_init: special mode: disabled 2020-02-17 14:09:31 driver-btm-soc.c:6533:bitmain_soc_init: This is high performance mode 2020-02-17 14:09:31 driver-btm-soc.c:6538:bitmain_soc_init: last commit version: 99791ac commit time: 2019-09-17 19:17:44 build: 2019-09-18 16:00:29 2020-02-17 14:09:31 driver-btm-soc.c:6559:bitmain_soc_init: Detect 256MB control board of XILINX 2020-02-17 14:09:31 driver-btm-soc.c:6562:bitmain_soc_init: Miner compile time: Wed Sep 18 15:51:07 CST 2019 type: Antminer S9 SE 2020-02-17 14:09:31 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7 2020-02-17 14:09:31 driver-btm-soc.c:851:check_chain: !! chain[0]is exist 2020-02-17 14:09:31 driver-btm-soc.c:851:check_chain: !! chain[1]is exist 2020-02-17 14:09:31 driver-btm-soc.c:851:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 5b 5b 5b 5b 5b 5b 5b 5b 00000090 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 000000a0 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 000000b0 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 000000c0 5b 5b 5b 5b 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 2c 16 00 00 20 ff ff ff 39 10 53 92 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fb 28 fb ff 00000080 ff ff ff ff ff ff ff a0 5c 5c 5c 5c 5c 5c 5c 5c 00000090 5c 59 5c 5c 5c 59 5c 5c 5c 5c 5c 5c 5c 5c 59 5c 000000a0 5c 5c 5c 5c 5c 5c 59 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000b0 5c 5c 5c 5c 5c 5c 5c 5c 5c 59 59 5c 5c 5c 5c 5c 000000c0 5c 5c 5c 5c 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 58 16 00 00 20 ff ff ff 39 10 16 b8 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fd 28 fd ff 00000080 ff ff ff ff ff ff ff a0 5c 5c 5c 5c 5c 5c 5c 5c 00000090 5c 59 59 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000a0 5c 5c 5c 5c 5c 59 59 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000b0 5c 5c 5c 5c 5c 5c 5c 5c 5c 59 59 5c 5c 5c 5c 5c 000000c0 5c 5c 5c 5c 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 58 16 00 00 20 ff ff ff 39 10 fc fb
read chain[0] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[1] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[2] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
sweep config for eco mode: sweep_start_voltage: 8.60 max_aging_voltage: 8.90 sweep_min_freq: 300M sweep_max_freq: 380M
sweep config for hpf mode: sweep_start_voltage: 9.20 max_aging_voltage: 9.50 sweep_min_freq: 415M sweep_max_freq: 465M 2020-02-17 14:09:43 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7 2020-02-17 14:09:43 driver-btm-soc.c:851:check_chain: !! chain[0]is exist 2020-02-17 14:09:43 driver-btm-soc.c:851:check_chain: !! chain[1]is exist 2020-02-17 14:09:43 driver-btm-soc.c:851:check_chain: !! chain[2]is exist 2020-02-17 14:09:43 driver-btm-soc.c:5965:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455 455
chain 1 freq: 460 460 460 460 460 460 460 460 460 445 460 460 460 445 460 460 460 460 460 460 460 460 445 460 460 460 460 460 460 460 445 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 445 445 460 460 460 460 460 460 460 460 460
chain 2 freq: 460 460 460 460 460 460 460 460 460 445 445 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 445 445 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 445 445 460 460 460 460 460 460 460 460 460
2020-02-17 14:09:43 driver-btm-soc.c:6647:bitmain_soc_init: reset all... 2020-02-17 14:09:45 driver-btm-soc.c:6655:bitmain_soc_init: miner ID : 814cf40618c08854 2020-02-17 14:09:45 driver-btm-soc.c:6359:init_miner_version: FPGA Version = 0xB00D 2020-02-17 14:10:04 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 2020-02-17 14:10:05 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 2020-02-17 14:10:06 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 2020-02-17 14:10:06 power.c:185:power_init: power init ... 2020-02-17 14:10:06 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[0] eeprom 2020-02-17 14:10:06 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.50 2020-02-17 14:10:06 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[1] eeprom 2020-02-17 14:10:06 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.50 2020-02-17 14:10:06 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[2] eeprom 2020-02-17 14:10:06 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.50 2020-02-17 14:10:06 driver-btm-soc.c:5754:update_highest_voltage: chain 0 hpf working voltage 9.20 2020-02-17 14:10:06 driver-btm-soc.c:5754:update_highest_voltage: chain 1 hpf working voltage 9.20 2020-02-17 14:10:06 driver-btm-soc.c:5754:update_highest_voltage: chain 2 hpf working voltage 9.20 2020-02-17 14:10:06 driver-btm-soc.c:5763:update_highest_voltage: open core at max voltage 9.94 2020-02-17 14:10:06 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 09.94 ...
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8449
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 17, 2020, 04:58:26 PM Last edit: February 18, 2020, 12:44:15 AM by frodocooper |
|
i have a question. it ends with voltage: 09.94 ...
is there missing info after ... that you did not include notice the photo i opened connection refused is no big deal. it should link eventually or reboot.
guesses
weak psu makes board drop poor eth cable bad board is possible.
you are 23 of 24 good boards around 5 percent bad. not out of the ordinary.
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2338
Merit: 6501
be constructive or S.T.F.U
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2020, 02:52:21 AM |
|
Below is the kernel log of one of my S9E 16Th version Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 198656K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 30720K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 17680K (cc9bc000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 16/7, WL threshold: 4096, image sequence number: 416762856 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 84A07273-7DB4-4D10-BFAD-008C5D5B6CDF, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 725/194, WL threshold: 4096, image sequence number: 1746335632 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 92A8FA43-575C-4006-B303-EDE1C509283D, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb34000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [1970-01-01 00:00:53.733] httpListenThread start ret=0 [1970-01-01 00:01:23.733] start listen on 6060 ... [1970-01-01 00:05:54.563] setStartTimePoint total_tv_start_sys=355 total_tv_end_sys=356
1970-01-01 00:00:53 driver-btm-soc.c:6490:bitmain_soc_init: This is Antminer S9 SE scan user version 1970-01-01 00:00:53 driver-btm-soc.c:6496:bitmain_soc_init: special mode: disabled 1970-01-01 00:00:53 driver-btm-soc.c:6503:bitmain_soc_init: This is high performance mode 1970-01-01 00:00:53 driver-btm-soc.c:6508:bitmain_soc_init: last commit version: a70ae17 commit time: 2019-07-10 21:53:39 build: 2019-07-11 11:18:49 1970-01-01 00:00:53 driver-btm-soc.c:6529:bitmain_soc_init: Detect 256MB control board of XILINX 1970-01-01 00:00:53 driver-btm-soc.c:6532:bitmain_soc_init: Miner compile time: Thu Jul 11 11:11:08 CST 2019 type: Antminer S9 SE 1970-01-01 00:00:53 driver-btm-soc.c:838:check_chain: get_hash_on_plug is 0x7 1970-01-01 00:00:53 driver-btm-soc.c:850:check_chain: !! chain[0]is exist 1970-01-01 00:00:53 driver-btm-soc.c:850:check_chain: !! chain[1]is exist 1970-01-01 00:00:53 driver-btm-soc.c:850:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a5 57 57 57 57 57 57 57 57 00000090 54 52 52 57 57 54 57 57 57 57 57 57 57 57 57 57 000000a0 57 57 57 57 54 52 52 54 57 57 57 57 57 57 57 57 000000b0 57 57 57 57 57 57 57 57 54 52 52 54 57 57 57 57 000000c0 57 57 57 57 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 00 15 00 00 60 ff ff ff 39 10 87 4a 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a5 57 57 57 57 57 57 54 4c 00000090 54 52 4c 54 54 57 57 52 57 57 57 57 57 57 57 57 000000a0 57 57 54 54 52 4c 4c 52 54 54 57 57 57 57 57 57 000000b0 52 57 57 57 57 54 57 57 54 4c 4c 52 54 54 57 57 000000c0 57 57 57 57 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff a9 14 00 00 60 ff ff ff 39 10 c9 cc 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fd ff 00000080 ff ff ff ff ff ff ff a5 58 58 58 58 58 58 58 58 00000090 58 55 55 58 58 58 58 58 58 58 58 58 58 58 58 58 000000a0 58 58 58 58 58 55 55 58 58 58 58 58 58 58 58 58 000000b0 58 58 58 58 58 58 58 58 58 55 55 58 58 58 58 58 000000c0 58 58 58 58 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 5e 15 00 00 60 ff ff ff 39 10 a3 23
read chain[0] hardware info: major type: 0 minor type: 4 chip level: 1 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[1] hardware info: major type: 0 minor type: 4 chip level: 1 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[2] hardware info: major type: 0 minor type: 4 chip level: 1 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
sweep config for eco mode: sweep_start_voltage: 8.60 max_aging_voltage: 8.90 sweep_min_freq: 300M sweep_max_freq: 380M
sweep config for hpf mode: sweep_start_voltage: 9.30 max_aging_voltage: 9.60 sweep_min_freq: 415M sweep_max_freq: 465M 1970-01-01 00:01:05 driver-btm-soc.c:838:check_chain: get_hash_on_plug is 0x7 1970-01-01 00:01:05 driver-btm-soc.c:850:check_chain: !! chain[0]is exist 1970-01-01 00:01:05 driver-btm-soc.c:850:check_chain: !! chain[1]is exist 1970-01-01 00:01:05 driver-btm-soc.c:850:check_chain: !! chain[2]is exist 1970-01-01 00:01:05 driver-btm-soc.c:5935:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 435 435 435 435 435 435 435 435 420 410 410 435 435 420 435 435 435 435 435 435 435 435 435 435 435 435 435 435 420 410 410 420 435 435 435 435 435 435 435 435 435 435 435 435 435 435 435 435 420 410 410 420 435 435 435 435 435 435 435 435
chain 1 freq: 435 435 435 435 435 435 420 380 420 410 380 420 420 435 435 410 435 435 435 435 435 435 435 435 435 435 420 420 410 380 380 410 420 420 435 435 435 435 435 435 410 435 435 435 435 420 435 435 420 380 380 410 420 420 435 435 435 435 435 435
chain 2 freq: 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440
1970-01-01 00:01:05 driver-btm-soc.c:6618:bitmain_soc_init: reset all... 1970-01-01 00:01:07 driver-btm-soc.c:6626:bitmain_soc_init: miner ID : 807875c81540885c 1970-01-01 00:01:07 driver-btm-soc.c:6329:init_miner_version: FPGA Version = 0xB00D 1970-01-01 00:01:26 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 1970-01-01 00:01:27 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 1970-01-01 00:01:28 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 1970-01-01 00:01:28 power.c:183:power_init: power init ... 1970-01-01 00:01:28 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.60] from chain[0] eeprom 1970-01-01 00:01:28 power.c:230:set_working_voltage_by_chain: chain[0] working_voltage = 9.600000 1970-01-01 00:01:28 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.60] from chain[1] eeprom 1970-01-01 00:01:28 power.c:230:set_working_voltage_by_chain: chain[1] working_voltage = 9.600000 1970-01-01 00:01:28 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.60] from chain[2] eeprom 1970-01-01 00:01:28 power.c:230:set_working_voltage_by_chain: chain[2] working_voltage = 9.600000 1970-01-01 00:01:28 driver-btm-soc.c:5724:update_highest_voltage: chain 0 hpf working voltage 9.30 1970-01-01 00:01:28 driver-btm-soc.c:5724:update_highest_voltage: chain 1 hpf working voltage 9.30 1970-01-01 00:01:28 driver-btm-soc.c:5724:update_highest_voltage: chain 2 hpf working voltage 9.30 1970-01-01 00:01:28 driver-btm-soc.c:5733:update_highest_voltage: open core at max voltage 10.04 1970-01-01 00:01:28 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to hightest voltage: 10.04 ... 1970-01-01 00:01:28 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 1970-01-01 00:01:29 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to hightest voltage: 10.04 ... 1970-01-01 00:01:31 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 1970-01-01 00:01:31 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to hightest voltage: 10.04 ... 1970-01-01 00:01:32 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 1970-01-01 00:01:32 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[0] hash rate = 5376 1970-01-01 00:01:32 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[1] hash rate = 5289 1970-01-01 00:01:32 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[2] hash rate = 5470 1970-01-01 00:01:32 driver-btm-soc.c:1190:get_eeprom_total_hash_rate: total rate = 16135 1970-01-01 00:01:32 driver-btm-soc.c:1198:get_ideal_hash_rate: get ideal hash rate 16000 1970-01-01 00:01:32 eeprom.c:665:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:435 IC[001]:435 IC[002]:435 IC[003]:435 IC[004]:435 IC[005]:435 IC[006]:435 IC[007]:435 IC[008]:420 IC[009]:410 IC[010]:410 IC[011]:435 IC[012]:435 IC[013]:420 IC[014]:435 IC[015]:435 IC[016]:435 IC[017]:435 IC[018]:435 IC[019]:435 IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:435 IC[024]:435 IC[025]:435 IC[026]:435 IC[027]:435 IC[028]:420 IC[029]:410 IC[030]:410 IC[031]:420 IC[032]:435 IC[033]:435 IC[034]:435 IC[035]:435 IC[036]:435 IC[037]:435 IC[038]:435 IC[039]:435 IC[040]:435 IC[041]:435 IC[042]:435 IC[043]:435 IC[044]:435 IC[045]:435 IC[046]:435 IC[047]:435 IC[048]:420 IC[049]:410 IC[050]:410 IC[051]:420 IC[052]:435 IC[053]:435 IC[054]:435 IC[055]:435 IC[056]:435 IC[057]:435 IC[058]:435 IC[059]:435 voltage in mode2: 9.30 V hash rate in mode2: 05376 GH/s
1970-01-01 00:01:32 eeprom.c:665:travel_eeprom_store: chain[1] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:435 IC[001]:435 IC[002]:435 IC[003]:435 IC[004]:435 IC[005]:435 IC[006]:420 IC[007]:380 IC[008]:420 IC[009]:410 IC[010]:380 IC[011]:420 IC[012]:420 IC[013]:435 IC[014]:435 IC[015]:410 IC[016]:435 IC[017]:435 IC[018]:435 IC[019]:435 IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:435 IC[024]:435 IC[025]:435 IC[026]:420 IC[027]:420 IC[028]:410 IC[029]:380 IC[030]:380 IC[031]:410 IC[032]:420 IC[033]:420 IC[034]:435 IC[035]:435 IC[036]:435 IC[037]:435 IC[038]:435 IC[039]:435 IC[040]:410 IC[041]:435 IC[042]:435 IC[043]:435 IC[044]:435 IC[045]:420 IC[046]:435 IC[047]:435 IC[048]:420 IC[049]:380 IC[050]:380 IC[051]:410 IC[052]:420 IC[053]:420 IC[054]:435 IC[055]:435 IC[056]:435 IC[057]:435 IC[058]:435 IC[059]:435 voltage in mode2: 9.30 V hash rate in mode2: 05289 GH/s
1970-01-01 00:01:32 eeprom.c:665:travel_eeprom_store: chain[2] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:440 IC[001]:440 IC[002]:440 IC[003]:440 IC[004]:440 IC[005]:440 IC[006]:440 IC[007]:440 IC[008]:440 IC[009]:425 IC[010]:425 IC[011]:440 IC[012]:440 IC[013]:440 IC[014]:440 IC[015]:440 IC[016]:440 IC[017]:440 IC[018]:440 IC[019]:440 IC[020]:440 IC[021]:440 IC[022]:440 IC[023]:440 IC[024]:440 IC[025]:440 IC[026]:440 IC[027]:440 IC[028]:440 IC[029]:425 IC[030]:425 IC[031]:440 IC[032]:440 IC[033]:440 IC[034]:440 IC[035]:440 IC[036]:440 IC[037]:440 IC[038]:440 IC[039]:440 IC[040]:440 IC[041]:440 IC[042]:440 IC[043]:440 IC[044]:440 IC[045]:440 IC[046]:440 IC[047]:440 IC[048]:440 IC[049]:425 IC[050]:425 IC[051]:440 IC[052]:440 IC[053]:440 IC[054]:440 IC[055]:440 IC[056]:440 IC[057]:440 IC[058]:440 IC[059]:440 voltage in mode2: 9.30 V hash rate in mode2: 05470 GH/s
1970-01-01 00:01:32 driver-btm-soc.c:6669:bitmain_soc_init: fan_eft : 1 fan_pwm : 90 1970-01-01 00:01:32 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 0 1970-01-01 00:01:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 1970-01-01 00:02:04 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 1970-01-01 00:02:06 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 0, find asic num = 60 1970-01-01 00:02:09 driver-btm-soc.c:4804:set_freq_by_chain: chain[0] set freq:100.00 1970-01-01 00:02:10 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 0 1970-01-01 00:02:10 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 1970-01-01 00:02:10 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 1970-01-01 00:02:10 temperature.c:513:is_tempsensor_data_correct: Bad,temp_info.type = 0 1970-01-01 00:02:10 temperature.c:741:calibration_sensor_offset: chain[0] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 1970-01-01 00:02:10 temperature.c:791:calibration_sensor_offset: Chain[0] chip[31] middle temp offset=-4, typeID=55 1970-01-01 00:02:11 temperature.c:791:calibration_sensor_offset: Chain[0] chip[40] middle temp offset=-4, typeID=55 1970-01-01 00:02:11 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 1 1970-01-01 00:02:12 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 1970-01-01 00:02:44 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 1970-01-01 00:02:45 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 1, find asic num = 60 1970-01-01 00:02:48 driver-btm-soc.c:4804:set_freq_by_chain: chain[1] set freq:100.00 1970-01-01 00:02:49 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 1 1970-01-01 00:02:49 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 1970-01-01 00:02:49 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 1970-01-01 00:02:49 temperature.c:513:is_tempsensor_data_correct: Bad,temp_info.type = 0 1970-01-01 00:02:49 temperature.c:741:calibration_sensor_offset: chain[1] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 1970-01-01 00:02:49 temperature.c:791:calibration_sensor_offset: Chain[1] chip[31] middle temp offset=-4, typeID=55 1970-01-01 00:02:50 temperature.c:791:calibration_sensor_offset: Chain[1] chip[40] middle temp offset=-4, typeID=55 1970-01-01 00:02:50 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 2 1970-01-01 00:02:51 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 1970-01-01 00:03:23 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 1970-01-01 00:03:24 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 2, find asic num = 60 1970-01-01 00:03:27 driver-btm-soc.c:4804:set_freq_by_chain: chain[2] set freq:100.00 1970-01-01 00:03:28 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 2 1970-01-01 00:03:28 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 1970-01-01 00:03:28 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 1970-01-01 00:03:28 temperature.c:513:is_tempsensor_data_correct: Bad,temp_info.type = 0 1970-01-01 00:03:28 temperature.c:741:calibration_sensor_offset: chain[2] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -3 0 0 0 0 1970-01-01 00:03:29 temperature.c:791:calibration_sensor_offset: Chain[2] chip[31] middle temp offset=-4, typeID=55 1970-01-01 00:03:29 temperature.c:791:calibration_sensor_offset: Chain[2] chip[40] middle temp offset=-3, typeID=55 1970-01-01 00:03:29 asic.c:1153:set_baud: set baud=1 1970-01-01 00:03:30 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 1970-01-01 00:03:31 temperature.c:1933:detect_startup_environment_temperature: Environment temperature: [12] 1970-01-01 00:03:31 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 1970-01-01 00:03:37 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 1970-01-01 00:03:37 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 125 1970-01-01 00:03:38 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 150 1970-01-01 00:03:39 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 175 1970-01-01 00:03:40 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 200 1970-01-01 00:03:41 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 225 1970-01-01 00:03:42 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 250 1970-01-01 00:03:43 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 275 1970-01-01 00:03:44 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 300 1970-01-01 00:03:45 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 325 1970-01-01 00:03:46 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 350 1970-01-01 00:03:47 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 375 1970-01-01 00:03:48 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 400 1970-01-01 00:03:49 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 410 1970-01-01 00:03:50 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 435 ,min = 410 1970-01-01 00:03:50 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[0] increaseing the diff freq ... 1970-01-01 00:03:54 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 0 final freq setting: 435 435 435 435 435 435 435 435 420 410 410 435 435 420 435 435 435 435 435 435 435 435 435 435 435 435 435 435 420 410 410 420 435 435 435 435 435 435 435 435 435 435 435 435 435 435 435 435 420 410 410 420 435 435 435 435 435 435 435 435 1970-01-01 00:03:54 power.c:1303:slowly_set_working_power_t11: set chain 0 to working voltage: now setting chain[0]-volt[10.04]-data[014] now setting chain[0]-volt[09.99]-data[015] now setting chain[0]-volt[09.94]-data[016] now setting chain[0]-volt[09.89]-data[017] now setting chain[0]-volt[09.85]-data[018] now setting chain[0]-volt[09.76]-data[020] now setting chain[0]-volt[09.68]-data[022] now setting chain[0]-volt[09.65]-data[023] now setting chain[0]-volt[09.61]-data[024] 1970-01-01 00:04:20 power.c:1318:slowly_set_working_power_t11: done! 1970-01-01 00:04:20 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 125 1970-01-01 00:04:21 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 150 1970-01-01 00:04:22 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 175 1970-01-01 00:04:23 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 200 1970-01-01 00:04:24 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 225 1970-01-01 00:04:25 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 250 1970-01-01 00:04:26 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 275 1970-01-01 00:04:27 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 300 1970-01-01 00:04:28 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 325 1970-01-01 00:04:29 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 350 1970-01-01 00:04:30 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 375 1970-01-01 00:04:31 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 380 1970-01-01 00:04:32 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 435 ,min = 380 1970-01-01 00:04:32 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[1] increaseing the diff freq ... 1970-01-01 00:04:43 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 1 final freq setting: 435 435 435 435 435 435 420 380 420 410 380 420 420 435 435 410 435 435 435 435 435 435 435 435 435 435 420 420 410 380 380 410 420 420 435 435 435 435 435 435 410 435 435 435 435 420 435 435 420 380 380 410 420 420 435 435 435 435 435 435 1970-01-01 00:04:43 power.c:1303:slowly_set_working_power_t11: set chain 1 to working voltage: now setting chain[1]-volt[10.04]-data[014] now setting 1970-01-01 00:04:48 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[1] after 3 times try! chain[1]-volt[09.99]-data[015] now setting chain[1]-volt[09.94]-data[016] now setting chain[1]-volt[09.89]-data[017] now setting chain[1]-volt[09.85]-data[018] now setting chain[1]-volt[09.76]-data[020] now setting chain[1]-volt[09.68]-data[022] now setting chain[1]-volt[09.65]-data[023] now setting chain[1]-volt[09.61]-data[024] 1970-01-01 00:05:10 power.c:1318:slowly_set_working_power_t11: done! 1970-01-01 00:05:10 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 125 1970-01-01 00:05:11 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 150 1970-01-01 00:05:12 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 175 1970-01-01 00:05:13 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 200 1970-01-01 00:05:14 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 225 1970-01-01 00:05:15 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 250 1970-01-01 00:05:16 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 275 1970-01-01 00:05:17 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 300 1970-01-01 00:05:18 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 325 1970-01-01 00:05:19 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 350 1970-01-01 00:05:21 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 375 1970-01-01 00:05:22 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 400 1970-01-01 00:05:23 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 425 1970-01-01 00:05:24 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 440 ,min = 425 1970-01-01 00:05:24 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ... 1970-01-01 00:05:27 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 2 final freq setting: 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 1970-01-01 00:05:27 power.c:1303:slowly_set_working_power_t11: set chain 2 to working voltage: now setting chain[2]-volt[10.04]-data[014] now setting chain[2]-volt[09.99]-data[015] now setting chain[2]-volt[09.94]-data[016] now setting chain[2]-volt[09.89]-data[017] now setting 1970-01-01 00:05:41 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try! chain[2]-volt[09.85]-data[018] now setting chain[2]-volt[09.76]-data[020] now setting chain[2]-volt[09.68]-data[022] now setting chain[2]-volt[09.65]-data[023] now setting 1970-01-01 00:05:53 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try! chain[2]-volt[09.61]-data[024] 1970-01-01 00:05:54 power.c:1318:slowly_set_working_power_t11: done! 1970-01-01 00:05:54 driver-btm-soc.c:5100:set_timeout: freq 440 final timeout=297 1970-01-01 00:05:54 driver-btm-soc.c:2918:low_temp_process_parm_init: chip miner_type = [4] 1970-01-01 00:05:54 driver-btm-soc.c:2918:low_temp_process_parm_init: chip miner_type = [4] 1970-01-01 00:05:54 driver-btm-soc.c:2918:low_temp_process_parm_init: chip miner_type = [4] 1970-01-01 00:05:54 driver-btm-soc.c:3357:check_system_work: check system thread start... 1970-01-01 00:05:54 driver-btm-soc.c:3374:check_system_work: low_bringup_pcb_temp_threshhold = 28 1970-01-01 00:05:54 driver-btm-soc.c:3375:check_system_work: recovery_working_vol_low_temp = 30, recovery_working_vol_high_temp = 35 1970-01-01 00:05:54 driver-btm-soc.c:3376:check_system_work: delta_voltage = 0.10 1970-01-01 00:05:54 driver-btm-soc.c:6771:bitmain_soc_init: Init done! 1970-01-01 00:05:54 driver-btm-soc.c:7478:bitmain_soc_prepare: bitmain soc init success. 1970-01-01 00:05:55 temperature.c:1402:read_temp_func: bring_up_pcb_temp = 18 1970-01-01 00:05:55 util.c:2178:process_version_mask: Pool 0 Version num is 2 1970-01-01 00:05:55 util.c:2178:process_version_mask: Pool 0 Version num is 2 1970-01-01 00:05:55 driver-btm-soc.c:7153:send_job: Version num 2 1970-01-01 00:06:15 driver-btm-soc.c:3529:check_system_work: set reopen algorith parameters... 1970-01-01 00:10:59 eeprom.c:913:eeprom_get_inbalance_info: error: chain[0] inbalance num is 255, more than MAX_OFFSET 4 1970-01-01 00:10:59 driver-btm-soc.c:2498:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 1970-01-01 00:10:59 eeprom.c:913:eeprom_get_inbalance_info: error: chain[1] inbalance num is 255, more than MAX_OFFSET 4 1970-01-01 00:10:59 driver-btm-soc.c:2498:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 1970-01-01 00:10:59 eeprom.c:913:eeprom_get_inbalance_info: error: chain[2] inbalance num is 255, more than MAX_OFFSET 4 1970-01-01 00:10:59 driver-btm-soc.c:2498:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 1970-01-01 00:10:59 driver-btm-soc.c:2511:is_domain_imbalance: dumping inbalance domain info... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2020-02-17 18:29:28 temperature.c:1225:process_status_value: Fatal Error: network connection lost! 2020-02-17 18:29:42 log.c:101:_log_update_name: _log_update_name 2020-02-17 18:29:42 log.c:101:_log_update_name: _log_update_name 2020-02-17 18:31:46 driver-btm-soc.c:3711:check_system_work: bring_up_pcb_temp = 18, low_bringup_pcb_temp_threshhold = 28 2020-02-17 18:31:46 driver-btm-soc.c:3712:check_system_work: detecting at 15 minutes 2020-02-17 18:31:46 driver-btm-soc.c:3713:check_system_work: target hash rate = 15840, 5mins avg hash rate = 15587
2020-02-17 18:31:46 driver-btm-soc.c:3734:check_system_work: low temp bing up:[Yes] 2020-02-17 18:31:46 driver-btm-soc.c:3735:check_system_work: low temp running:[No]
2020-02-17 18:31:46 driver-btm-soc.c:3738:check_system_work: Temp Low! Entering Low Environment Handler... 2020-02-17 18:31:46 driver-btm-soc.c:3018:get_compensation_voltage: chip miner_type = [4] 2020-02-17 18:31:46 driver-btm-soc.c:3018:get_compensation_voltage: chip miner_type = [4] 2020-02-17 18:31:46 driver-btm-soc.c:3018:get_compensation_voltage: chip miner_type = [4] 2020-02-17 18:31:46 driver-btm-soc.c:3026:get_compensation_voltage: last_testpatten_lowest_pcb_temp = 20 2020-02-17 18:31:46 driver-btm-soc.c:3027:get_compensation_voltage: max_delta_vol = 0.10 2020-02-17 18:31:46 driver-btm-soc.c:3190:get_compensation_voltage: chain[0] working vol = 9.60, add vol = 0.10... 2020-02-17 18:31:46 driver-btm-soc.c:3190:get_compensation_voltage: chain[1] working vol = 9.60, add vol = 0.10... 2020-02-17 18:31:46 driver-btm-soc.c:3190:get_compensation_voltage: chain[2] working vol = 9.60, add vol = 0.10... 2020-02-17 18:31:46 driver-btm-soc.c:6960:re_open_core_by_chain:
reopen chain 0, current pwm 90 2020-02-17 18:31:48 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to hightest voltage: 10.04 ... 2020-02-17 18:31:50 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2020-02-17 18:31:50 asic.c:1176:set_baud_by_chain: chain 0 set baud=26 2020-02-17 18:31:50 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 0 2020-02-17 18:31:50 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9 2020-02-17 18:31:51 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2020-02-17 18:31:53 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 0, find asic num = 60 2020-02-17 18:31:56 driver-btm-soc.c:4804:set_freq_by_chain: chain[0] set freq:100.00 2020-02-17 18:31:57 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 0 2020-02-17 18:31:57 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2020-02-17 18:31:57 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2020-02-17 18:31:57 temperature.c:791:calibration_sensor_offset: Chain[0] chip[31] middle temp offset=-4, typeID=55 2020-02-17 18:31:58 temperature.c:791:calibration_sensor_offset: Chain[0] chip[40] middle temp offset=-4, typeID=55 2020-02-17 18:31:58 asic.c:1176:set_baud_by_chain: chain 0 set baud=1 2020-02-17 18:31:58 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2020-02-17 18:31:58 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 2020-02-17 18:32:00 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 2020-02-17 18:32:01 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 125 2020-02-17 18:32:02 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 150 2020-02-17 18:32:03 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 175 2020-02-17 18:32:04 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 200 2020-02-17 18:32:05 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 225 2020-02-17 18:32:06 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 250 2020-02-17 18:32:07 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 275 2020-02-17 18:32:08 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 300 2020-02-17 18:32:09 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 325 2020-02-17 18:32:10 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 350 2020-02-17 18:32:11 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 375 2020-02-17 18:32:12 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 400 2020-02-17 18:32:13 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 410 2020-02-17 18:32:14 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 435 ,min = 410 2020-02-17 18:32:14 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[0] increaseing the diff freq ... 2020-02-17 18:32:18 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 0 final freq setting: 435 435 435 435 435 435 435 435 420 410 410 435 435 420 435 435 435 435 435 435 435 435 435 435 435 435 435 435 420 410 410 420 435 435 435 435 435 435 435 435 435 435 435 435 435 435 435 435 420 410 410 420 435 435 435 435 435 435 435 435 2020-02-17 18:32:18 driver-btm-soc.c:5100:set_timeout: freq 440 final timeout=297 2020-02-17 18:32:19 driver-btm-soc.c:6987:re_open_core_by_chain: reopen chain 0 finished, chain 0 chip temp 41 - 60 2020-02-17 18:32:19 driver-btm-soc.c:6988:re_open_core_by_chain: all chain chip temp 41 - 63 2020-02-17 18:32:19 driver-btm-soc.c:7004:re_open_core_by_chain: re_open_core done! 2020-02-17 18:32:49 driver-btm-soc.c:6960:re_open_core_by_chain:
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2338
Merit: 6501
be constructive or S.T.F.U
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2020, 02:58:08 AM |
|
Continuation (exceeded maximum length) reopen chain 1, current pwm 90 2020-02-17 18:32:52 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to hightest voltage: 10.04 ... 2020-02-17 18:32:52 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2020-02-17 18:32:52 asic.c:1176:set_baud_by_chain: chain 1 set baud=26 2020-02-17 18:32:53 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 1 2020-02-17 18:32:53 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2020-02-17 18:32:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2020-02-17 18:32:55 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 1, find asic num = 60 2020-02-17 18:32:58 driver-btm-soc.c:4804:set_freq_by_chain: chain[1] set freq:100.00 2020-02-17 18:32:59 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 1 2020-02-17 18:32:59 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2020-02-17 18:32:59 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2020-02-17 18:32:59 temperature.c:791:calibration_sensor_offset: Chain[1] chip[31] middle temp offset=-4, typeID=55 2020-02-17 18:33:00 temperature.c:791:calibration_sensor_offset: Chain[1] chip[40] middle temp offset=-4, typeID=55 2020-02-17 18:33:00 asic.c:1176:set_baud_by_chain: chain 1 set baud=1 2020-02-17 18:33:00 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2020-02-17 18:33:00 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 2020-02-17 18:33:03 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 2020-02-17 18:33:03 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 125 2020-02-17 18:33:04 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 150 2020-02-17 18:33:05 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 175 2020-02-17 18:33:06 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 200 2020-02-17 18:33:07 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 225 2020-02-17 18:33:08 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 250 2020-02-17 18:33:09 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 275 2020-02-17 18:33:10 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 300 2020-02-17 18:33:11 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 325 2020-02-17 18:33:12 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 350 2020-02-17 18:33:13 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 375 2020-02-17 18:33:14 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 380 2020-02-17 18:33:15 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 435 ,min = 380 2020-02-17 18:33:15 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[1] increaseing the diff freq ... 2020-02-17 18:33:26 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 1 final freq setting: 435 435 435 435 435 435 420 380 420 410 380 420 420 435 435 410 435 435 435 435 435 435 435 435 435 435 420 420 410 380 380 410 420 420 435 435 435 435 435 435 410 435 435 435 435 420 435 435 420 380 380 410 420 420 435 435 435 435 435 435 2020-02-17 18:33:26 driver-btm-soc.c:5100:set_timeout: freq 440 final timeout=297 2020-02-17 18:33:27 driver-btm-soc.c:6987:re_open_core_by_chain: reopen chain 1 finished, chain 1 chip temp 45 - 60 2020-02-17 18:33:27 driver-btm-soc.c:6988:re_open_core_by_chain: all chain chip temp 42 - 69 2020-02-17 18:33:27 driver-btm-soc.c:7004:re_open_core_by_chain: re_open_core done! 2020-02-17 18:33:57 driver-btm-soc.c:6960:re_open_core_by_chain:
reopen chain 2, current pwm 90 2020-02-17 18:34:00 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to hightest voltage: 10.04 ... 2020-02-17 18:34:02 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2020-02-17 18:34:02 asic.c:1176:set_baud_by_chain: chain 2 set baud=26 2020-02-17 18:34:02 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 2 2020-02-17 18:34:02 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2020-02-17 18:34:03 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2020-02-17 18:34:05 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 2, find asic num = 60 2020-02-17 18:34:08 driver-btm-soc.c:4804:set_freq_by_chain: chain[2] set freq:100.00 2020-02-17 18:34:09 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 2 2020-02-17 18:34:09 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2020-02-17 18:34:09 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2020-02-17 18:34:09 temperature.c:791:calibration_sensor_offset: Chain[2] chip[31] middle temp offset=-4, typeID=55 2020-02-17 18:34:10 temperature.c:791:calibration_sensor_offset: Chain[2] chip[40] middle temp offset=-3, typeID=55 2020-02-17 18:34:10 asic.c:1176:set_baud_by_chain: chain 2 set baud=1 2020-02-17 18:34:10 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2020-02-17 18:34:10 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 2020-02-17 18:34:12 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 2020-02-17 18:34:12 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 125 2020-02-17 18:34:13 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 150 2020-02-17 18:34:14 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 175 2020-02-17 18:34:15 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 200 2020-02-17 18:34:16 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 225 2020-02-17 18:34:17 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 250 2020-02-17 18:34:19 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 275 2020-02-17 18:34:20 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 300 2020-02-17 18:34:21 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 325 2020-02-17 18:34:22 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 350 2020-02-17 18:34:23 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 375 2020-02-17 18:34:24 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 400 2020-02-17 18:34:25 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 425 2020-02-17 18:34:26 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 440 ,min = 425 2020-02-17 18:34:26 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ... 2020-02-17 18:34:29 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 2 final freq setting: 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 2020-02-17 18:34:29 driver-btm-soc.c:5100:set_timeout: freq 440 final timeout=297 2020-02-17 18:34:30 driver-btm-soc.c:6987:re_open_core_by_chain: reopen chain 2 finished, chain 2 chip temp 41 - 54 2020-02-17 18:34:30 driver-btm-soc.c:6988:re_open_core_by_chain: all chain chip temp 41 - 71 2020-02-17 18:34:30 driver-btm-soc.c:7004:re_open_core_by_chain: re_open_core done! 2020-02-17 18:35:00 power.c:269:set_higher_voltage_by_chain: chain[0] higher_voltage = 9.700001 2020-02-17 18:35:00 power.c:269:set_higher_voltage_by_chain: chain[1] higher_voltage = 9.700001 2020-02-17 18:35:00 power.c:269:set_higher_voltage_by_chain: chain[2] higher_voltage = 9.700001 2020-02-17 18:35:00 power.c:1253:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage: now setting chain[0]-volt[10.04]-data[014] chain[1]-volt[10.04]-data[014] chain[2]-volt[10.04]-data[014] now setting chain[0]-volt[09.99]-data[015] chain[1]-volt[09.99]-data[015] chain[2]-volt[09.99]-data[015] now setting chain[0]-volt[09.94]-data[016] chain[1]-volt[09.94]-data[016] chain[2]-volt[09.94]-data[016] now setting chain[0]-volt[09.89]-data[017] chain[1]-volt[09.89]-data[017] chain[2]-volt[09.89]-data[017] now setting chain[0]-volt[09.85]-data[018] chain[1]-volt[09.85]-data[018] chain[2]-volt[09.85]-data[018] now setting chain[0]-volt[09.76]-data[020] chain[1]-volt[09.76]-data[020] chain[2]-volt[09.76]-data[020] now setting chain[0]-volt[09.72]-data[021] chain[1]-volt[09.72]-data[021] chain[2]-volt[09.72]-data[021] 2020-02-17 18:35:17 power.c:1273:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end! now setting chain[0]-volt[09.72]-data[021] chain[1]-volt[09.72]-data[021] chain[2]-volt[09.72]-data[021] 2020-02-17 18:35:17 hash_rate.c:58:clear_queue: reset calc... 2020-02-17 18:35:17 driver-btm-soc.c:3786:check_system_work: low temperature re_open_core [1] times,DONE! 2020-02-17 18:40:21 driver-btm-soc.c:3711:check_system_work: bring_up_pcb_temp = 18, low_bringup_pcb_temp_threshhold = 28 2020-02-17 18:40:21 driver-btm-soc.c:3712:check_system_work: detecting at 20 minutes 2020-02-17 18:40:21 driver-btm-soc.c:3713:check_system_work: target hash rate = 15840, 5mins avg hash rate = 15663
2020-02-17 18:40:21 driver-btm-soc.c:3734:check_system_work: low temp bing up:[Yes] 2020-02-17 18:40:21 driver-btm-soc.c:3735:check_system_work: low temp running:[No]
2020-02-17 18:40:21 driver-btm-soc.c:3738:check_system_work: Temp Low! Entering Low Environment Handler... 2020-02-17 18:40:21 driver-btm-soc.c:3026:get_compensation_voltage: last_testpatten_lowest_pcb_temp = 20 2020-02-17 18:40:21 driver-btm-soc.c:3027:get_compensation_voltage: max_delta_vol = 0.10 2020-02-17 18:40:21 driver-btm-soc.c:3173:get_compensation_voltage: add extra 0.1V for low temp handler! 2020-02-17 18:40:21 driver-btm-soc.c:3190:get_compensation_voltage: chain[0] working vol = 9.60, add vol = 0.20... 2020-02-17 18:40:21 driver-btm-soc.c:3190:get_compensation_voltage: chain[1] working vol = 9.60, add vol = 0.20... 2020-02-17 18:40:21 driver-btm-soc.c:3190:get_compensation_voltage: chain[2] working vol = 9.60, add vol = 0.20... 2020-02-17 18:40:21 driver-btm-soc.c:6960:re_open_core_by_chain:
reopen chain 0, current pwm 90 2020-02-17 18:40:23 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to hightest voltage: 10.04 ... 2020-02-17 18:40:24 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2020-02-17 18:40:24 asic.c:1176:set_baud_by_chain: chain 0 set baud=26 2020-02-17 18:40:24 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 0 2020-02-17 18:40:24 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9 2020-02-17 18:40:25 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2020-02-17 18:40:27 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 0, find asic num = 60 2020-02-17 18:40:30 driver-btm-soc.c:4804:set_freq_by_chain: chain[0] set freq:100.00 2020-02-17 18:40:31 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 0 2020-02-17 18:40:31 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2020-02-17 18:40:31 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2020-02-17 18:40:31 temperature.c:791:calibration_sensor_offset: Chain[0] chip[31] middle temp offset=-4, typeID=55 2020-02-17 18:40:32 temperature.c:791:calibration_sensor_offset: Chain[0] chip[40] middle temp offset=-4, typeID=55 2020-02-17 18:40:32 asic.c:1176:set_baud_by_chain: chain 0 set baud=1 2020-02-17 18:40:32 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2020-02-17 18:40:32 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 2020-02-17 18:40:34 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 2020-02-17 18:40:34 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 125 2020-02-17 18:40:35 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 150 2020-02-17 18:40:36 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 175 2020-02-17 18:40:37 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 200 2020-02-17 18:40:38 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 225 2020-02-17 18:40:39 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 250 2020-02-17 18:40:41 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 275 2020-02-17 18:40:42 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 300 2020-02-17 18:40:43 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 325 2020-02-17 18:40:44 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 350 2020-02-17 18:40:45 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 375 2020-02-17 18:40:46 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 400 2020-02-17 18:40:47 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 410 2020-02-17 18:40:48 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 435 ,min = 410 2020-02-17 18:40:48 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[0] increaseing the diff freq ... 2020-02-17 18:40:51 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 0 final freq setting: 435 435 435 435 435 435 435 435 420 410 410 435 435 420 435 435 435 435 435 435 435 435 435 435 435 435 435 435 420 410 410 420 435 435 435 435 435 435 435 435 435 435 435 435 435 435 435 435 420 410 410 420 435 435 435 435 435 435 435 435 2020-02-17 18:40:51 driver-btm-soc.c:5100:set_timeout: freq 440 final timeout=297 2020-02-17 18:40:52 driver-btm-soc.c:6987:re_open_core_by_chain: reopen chain 0 finished, chain 0 chip temp 42 - 61 2020-02-17 18:40:52 driver-btm-soc.c:6988:re_open_core_by_chain: all chain chip temp 42 - 65 2020-02-17 18:40:52 driver-btm-soc.c:7004:re_open_core_by_chain: re_open_core done! 2020-02-17 18:41:22 driver-btm-soc.c:6960:re_open_core_by_chain:
reopen chain 1, current pwm 90 2020-02-17 18:41:25 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to hightest voltage: 10.04 ... 2020-02-17 18:41:26 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2020-02-17 18:41:26 asic.c:1176:set_baud_by_chain: chain 1 set baud=26 2020-02-17 18:41:26 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 1 2020-02-17 18:41:26 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2020-02-17 18:41:27 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2020-02-17 18:41:29 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 1, find asic num = 60 2020-02-17 18:41:32 driver-btm-soc.c:4804:set_freq_by_chain: chain[1] set freq:100.00 2020-02-17 18:41:33 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 1 2020-02-17 18:41:33 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2020-02-17 18:41:33 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2020-02-17 18:41:33 temperature.c:791:calibration_sensor_offset: Chain[1] chip[31] middle temp offset=-4, typeID=55 2020-02-17 18:41:34 temperature.c:791:calibration_sensor_offset: Chain[1] chip[40] middle temp offset=-4, typeID=55 2020-02-17 18:41:34 asic.c:1176:set_baud_by_chain: chain 1 set baud=1 2020-02-17 18:41:34 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2020-02-17 18:41:34 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 2020-02-17 18:41:36 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 2020-02-17 18:41:36 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 125 2020-02-17 18:41:37 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 150 2020-02-17 18:41:38 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 175 2020-02-17 18:41:39 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 200 2020-02-17 18:41:40 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 225 2020-02-17 18:41:42 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 250 2020-02-17 18:41:43 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 275 2020-02-17 18:41:44 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 300 2020-02-17 18:41:45 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 325 2020-02-17 18:41:46 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 350 2020-02-17 18:41:47 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 375 2020-02-17 18:41:48 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 380 2020-02-17 18:41:49 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 435 ,min = 380 2020-02-17 18:41:49 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[1] increaseing the diff freq ... 2020-02-17 18:41:59 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 1 final freq setting: 435 435 435 435 435 435 420 380 420 410 380 420 420 435 435 410 435 435 435 435 435 435 435 435 435 435 420 420 410 380 380 410 420 420 435 435 435 435 435 435 410 435 435 435 435 420 435 435 420 380 380 410 420 420 435 435 435 435 435 435 2020-02-17 18:42:00 driver-btm-soc.c:5100:set_timeout: freq 440 final timeout=297 2020-02-17 18:42:01 driver-btm-soc.c:6987:re_open_core_by_chain: reopen chain 1 finished, chain 1 chip temp 46 - 61 2020-02-17 18:42:01 driver-btm-soc.c:6988:re_open_core_by_chain: all chain chip temp 43 - 70 2020-02-17 18:42:01 driver-btm-soc.c:7004:re_open_core_by_chain: re_open_core done! 2020-02-17 18:42:31 driver-btm-soc.c:6960:re_open_core_by_chain:
reopen chain 2, current pwm 90 2020-02-17 18:42:33 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to hightest voltage: 10.04 ... 2020-02-17 18:42:34 power.c:705:set_iic_power_by_voltage: now setting voltage to : 10.044000 2020-02-17 18:42:34 asic.c:1176:set_baud_by_chain: chain 2 set baud=26 2020-02-17 18:42:34 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 2 2020-02-17 18:42:34 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2020-02-17 18:42:35 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2020-02-17 18:42:37 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 2, find asic num = 60 2020-02-17 18:42:40 driver-btm-soc.c:4804:set_freq_by_chain: chain[2] set freq:100.00 2020-02-17 18:42:41 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 2 2020-02-17 18:42:41 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2020-02-17 18:42:41 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2020-02-17 18:42:41 temperature.c:791:calibration_sensor_offset: Chain[2] chip[31] middle temp offset=-4, typeID=55 2020-02-17 18:42:42 temperature.c:791:calibration_sensor_offset: Chain[2] chip[40] middle temp offset=-3, typeID=55 2020-02-17 18:42:42 asic.c:1176:set_baud_by_chain: chain 2 set baud=1 2020-02-17 18:42:42 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2020-02-17 18:42:42 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 2020-02-17 18:42:44 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 2020-02-17 18:42:44 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 125 2020-02-17 18:42:46 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 150 2020-02-17 18:42:47 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 175 2020-02-17 18:42:48 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 200 2020-02-17 18:42:49 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 225 2020-02-17 18:42:50 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 250 2020-02-17 18:42:51 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 275 2020-02-17 18:42:52 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 300 2020-02-17 18:42:53 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 325 2020-02-17 18:42:54 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 350 2020-02-17 18:42:55 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 375 2020-02-17 18:42:56 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 400 2020-02-17 18:42:57 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 425 2020-02-17 18:42:58 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 440 ,min = 425 2020-02-17 18:42:58 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ... 2020-02-17 18:43:02 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 2 final freq setting: 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 440 425 425 440 440 440 440 440 440 440 440 440 2020-02-17 18:43:02 driver-btm-soc.c:5100:set_timeout: freq 440 final timeout=297 2020-02-17 18:43:03 driver-btm-soc.c:6987:re_open_core_by_chain: reopen chain 2 finished, chain 2 chip temp 41 - 55 2020-02-17 18:43:03 driver-btm-soc.c:6988:re_open_core_by_chain: all chain chip temp 41 - 71 2020-02-17 18:43:03 driver-btm-soc.c:7004:re_open_core_by_chain: re_open_core done! 2020-02-17 18:43:33 power.c:269:set_higher_voltage_by_chain: chain[0] higher_voltage = 9.800000 2020-02-17 18:43:33 power.c:269:set_higher_voltage_by_chain: chain[1] higher_voltage = 9.800000 2020-02-17 18:43:33 power.c:269:set_higher_voltage_by_chain: chain[2] higher_voltage = 9.800000 2020-02-17 18:43:33 power.c:1253:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage: now setting chain[0]-volt[10.04]-data[014] chain[1]-volt[10.04]-data[014] chain[2]-volt[10.04]-data[014] now setting chain[0]-volt[09.99]-data[015] chain[1]-volt[09.99]-data[015] chain[2]-volt[09.99]-data[015] now setting chain[0]-volt[09.94]-data[016] chain[1]-volt[09.94]-data[016] chain[2]-volt[09.94]-data[016] now setting chain[0]-volt[09.89]-data[017] chain[1]-volt[09.89]-data[017] chain[2]-volt[09.89]-data[017] now setting chain[0]-volt[09.85]-data[018] chain[1]-volt[09.85]-data[018] chain[2]-volt[09.85]-data[018] now setting chain[0]-volt[09.80]-data[019] chain[1]-volt[09.80]-data[019] chain[2]-volt[09.80]-data[019] 2020-02-17 18:43:47 power.c:1273:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end! now setting chain[0]-volt[09.80]-data[019] chain[1]-volt[09.80]-data[019] chain[2]-volt[09.80]-data[019] 2020-02-17 18:43:47 hash_rate.c:58:clear_queue: reset calc... 2020-02-17 18:43:47 driver-btm-soc.c:3786:check_system_work: low temperature re_open_core [2] times,DONE! 2020-02-17 19:14:14 driver-btm-soc.c:3498:check_system_work: The avg rate is 16380 in 30 mins, PCB temperature between 17 ~ 48 2020-02-17 19:44:41 driver-btm-soc.c:3498:check_system_work: The avg rate is 16096 in 30 mins, PCB temperature between 20 ~ 45 2020-02-17 20:15:09 driver-btm-soc.c:3498:check_system_work: The avg rate is 16140 in 30 mins, PCB temperature between 19 ~ 45 2020-02-17 20:45:36 driver-btm-soc.c:3498:check_system_work: The avg rate is 16200 in 30 mins, PCB temperature between 19 ~ 45 2020-02-17 21:16:04 driver-btm-soc.c:3498:check_system_work: The avg rate is 16251 in 30 mins, PCB temperature between 17 ~ 44 2020-02-17 21:46:31 driver-btm-soc.c:3498:check_system_work: The avg rate is 16199 in 30 mins, PCB temperature between 16 ~ 42 2020-02-17 21:48:04 driver-btm-soc.c:7153:send_job: Version num 1 2020-02-17 21:48:04 util.c:2178:process_version_mask: Pool 0 Version num is 2 2020-02-17 21:48:04 util.c:2178:process_version_mask: Pool 0 Version num is 2 2020-02-17 21:48:11 driver-btm-soc.c:7153:send_job: Version num 2 2020-02-17 22:16:59 driver-btm-soc.c:3498:check_system_work: The avg rate is 16188 in 30 mins, PCB temperature between 16 ~ 41 2020-02-17 22:47:27 driver-btm-soc.c:3498:check_system_work: The avg rate is 16185 in 30 mins, PCB temperature between 15 ~ 41 2020-02-17 23:17:55 driver-btm-soc.c:3498:check_system_work: The avg rate is 16291 in 30 mins, PCB temperature between 16 ~ 41 2020-02-17 23:48:22 driver-btm-soc.c:3498:check_system_work: The avg rate is 16275 in 30 mins, PCB temperature between 16 ~ 41 2020-02-18 00:18:50 driver-btm-soc.c:3498:check_system_work: The avg rate is 16312 in 30 mins, PCB temperature between 16 ~ 41 2020-02-18 00:49:18 driver-btm-soc.c:3498:check_system_work: The avg rate is 16200 in 30 mins, PCB temperature between 15 ~ 41 2020-02-18 01:19:46 driver-btm-soc.c:3498:check_system_work: The avg rate is 16146 in 30 mins, PCB temperature between 15 ~ 39 2020-02-18 01:50:13 driver-btm-soc.c:3498:check_system_work: The avg rate is 16108 in 30 mins, PCB temperature between 15 ~ 39 2020-02-18 02:20:41 driver-btm-soc.c:3498:check_system_work: The avg rate is 16171 in 30 mins, PCB temperature between 15 ~ 39 For the miner that shows only 2 hash boards, there is a 90% chance that board number 2 is bad, a 10% chance the PSU / data cable (from the control board to hash board) is bad. The simplest way to troubleshoot this is by swapping the PSU with a working one, and the same thing for the ribbon cable, if no luck then you have to actually unplug/remove hash board number 2 which is the middle board, the miner will most likely run just fine when you do that, of course with only 2/3 of the total hash rate you would expect. as for your other concern, the S9Es are much better than the S9k, but they are not even close to being half stable and robust as the S9/S9j/S9i, they take forever to boot and start hashing at a stable rate, don't compare them to your old S9s, those days are over.
|
|
|
|
mark421421 (OP)
Jr. Member
Offline
Activity: 44
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2020, 06:19:39 AM |
|
Thanks every one for the reply.
I have had that one running for 17 hours now. Then I woke up this morning to fin another one had tripped off. Its 5 degrees celsius outside and probably about 17 in the room with lots of air flow.
Its a shame they are problematic.
I will try replacing the ethernet cable and swap power supplies around but I'm not confident it will work!
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2020, 01:58:05 PM |
|
Thanks every one for the reply.
I have had that one running for 17 hours now. Then I woke up this morning to fin another one had tripped off. Its 5 degrees celsius outside and probably about 17 in the room with lots of air flow.
Its a shame they are problematic.
I will try replacing the ethernet cable and swap power supplies around but I'm not confident it will work!
Check all the ribbon cables are attached correctly, lots of stuff comes from Bitmain with loose cables
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8449
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2020, 04:04:38 PM |
|
I think they would be better in a 25c room.
I have 29
s9 s9i s9k room uses filtered outside air.
If it drops to -10c room gets cold and the s9k’s tend to drop out.
having a mix of s9s I have to say if you can get s9i they are the best. I have one at stock and it does 15th
it just works and is the single best s9 i have.
s9 gear seems to like some warmth . good luck with the gear ⚙️.
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2338
Merit: 6501
be constructive or S.T.F.U
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2020, 09:49:03 PM |
|
having a mix of s9s I have to say if you can get s9i they are the best. I have one at stock and it does 15th
I think you don't have S9j then, because based on my own experience and almost everyone else whom i asked, the J series seem to have the finest chips among all it's other S9 rivals, i have not personally checked the power consumption but i heard they do slightly better too. Having said that, the difference is really very minor between the S9i and the S9j , it gets wider when compared to the normal S9 and ofcourse a lot better when compared to the S9k, the latter is the worst gear bitmain has ever made.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8449
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2020, 03:31:36 AM Last edit: February 19, 2020, 09:48:13 AM by frodocooper |
|
I think that 1 s9i is a cut above my other ones. since I never got my hands on a s9j.
I should have wrote it is my best s9 style miner.
|
|
|
|
mark421421 (OP)
Jr. Member
Offline
Activity: 44
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2020, 06:27:32 AM Last edit: February 19, 2020, 09:48:58 AM by frodocooper Merited by frodocooper (3), Halab (2) |
|
I bought 8 of these ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) I tried moving them into the garage loft last night to warm them up (they tripped off instantly) I think this could also do with the air flow up there. I have 4 at work (which seem to be more stable) but 2 of them tripped off last night. Its a lot warmer in there maybe mid 20s. They might end up on Ebay these!! I have 6 T17+ coming soon I hope they are improvement! https://imgur.com/bD1mKCCI think I will try them again in the warmer loft but add more airflow. I also checked the ribbons and 1 wasn't pushed in properly. Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25672K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12632K (cceab000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad block at 0x000002420000 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 948121315 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 73CCF1DF-B24E-4641-A764-744C99B4FACD, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 3440902988 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1E1784B9-5B1B-4A66-9883-26A60D609B15, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2020-02-16 11:50:15.309] httpListenThread start ret=0 [2020-02-16 11:50:45.311] start listen on 6060 ... [2020-02-16 11:56:38.043] setStartTimePoint total_tv_start_sys=423 total_tv_end_sys=424
|
|
|
|
mark421421 (OP)
Jr. Member
Offline
Activity: 44
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2020, 06:30:08 AM Last edit: February 28, 2020, 12:04:08 PM by mark421421 Merited by frodocooper (3) |
|
2020-02-16 11:50:15 driver-btm-soc.c:6520:bitmain_soc_init: This is Antminer S9 SE scan user version 2020-02-16 11:50:15 driver-btm-soc.c:6526:bitmain_soc_init: special mode: disabled 2020-02-16 11:50:15 driver-btm-soc.c:6533:bitmain_soc_init: This is high performance mode 2020-02-16 11:50:15 driver-btm-soc.c:6538:bitmain_soc_init: last commit version: 99791ac commit time: 2019-09-17 19:17:44 build: 2019-09-18 16:00:29 2020-02-16 11:50:15 driver-btm-soc.c:6559:bitmain_soc_init: Detect 256MB control board of XILINX 2020-02-16 11:50:15 driver-btm-soc.c:6562:bitmain_soc_init: Miner compile time: Wed Sep 18 15:51:07 CST 2019 type: Antminer S9 SE 2020-02-16 11:50:15 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7 2020-02-16 11:50:15 driver-btm-soc.c:851:check_chain: !! chain[0]is exist 2020-02-16 11:50:15 driver-btm-soc.c:851:check_chain: !! chain[1]is exist 2020-02-16 11:50:15 driver-btm-soc.c:851:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fd ff 00000080 ff ff ff ff ff ff ff a0 5c 5c 5c 5c 5c 59 5c 5c 00000090 5c 51 51 5c 5c 59 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000a0 5c 5c 5c 5c 59 51 5c 51 5c 59 5c 5c 5c 5c 5c 5c 000000b0 5c 5c 5c 5c 5c 5c 5c 5c 59 51 51 59 5c 5c 5c 5c 000000c0 5c 5c 5c 5c 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 13 16 00 00 20 ff ff ff 39 10 9f 14 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 5c 5c 5c 5c 5c 5c 5c 5c 00000090 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000a0 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000b0 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000c0 5c 5c 5c 5c 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 6a 16 00 00 20 ff ff ff 39 10 b5 9b 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 5c 5c 5c 5c 5c 5c 5c 5c 00000090 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000a0 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000b0 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 5c 000000c0 5c 5c 5c 5c 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff 6a 16 00 00 20 ff ff ff 39 10 b5 9b
I also forgot to mention that at home I am venting out the air using individual 4" ducts straight outside. Bit of an update I jigged the ducting around at home and put 4 6" ducts from the outside straight on to the back of the miners and 3 out of the four are more stable. I noticed this morn on the one playing up, I hadn't put the power supply on to one of the boards properly. Is there any other firmware available for SE? Update 21-22-20 I move one of them around at home (the one that was regular stopping mining) I remove the 4" out let and let it just pump air in the room and its much more stable. Still having the odd issue at work.
|
|
|
|
Akhan.96
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/sad.gif) |
April 03, 2022, 01:11:19 AM Last edit: April 06, 2022, 11:05:46 AM by Akhan.96 |
|
Hey there mining community. I'm a new miner just has been mining for a year. I bought S9 SE used without warranty. It worked the first day and then I had to relocate it and now one of the hashboard is not working. It shows different frequency and no hashboard. I'll paste the kernel log here below. Please guide. Thanks in advance. -- Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 198640K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 30736K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 17696K (cc9b9000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1160479334 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E62CCBE4-06A4-4179-B1F6-51730C5BD571, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 4098/1056, WL threshold: 4096, image sequence number: 1541186754 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID F289C35C-0438-4A9A-8650-D9B70DD3B9E1, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 [2022-04-02 23:46:01.738] httpListenThread start ret=0 [2022-04-02 23:46:31.742] start listen on 6060 ... 2022-04-02 23:46:01 driver-btm-soc.c:6490:bitmain_soc_init: This is Antminer S9 SE scan user version 2022-04-02 23:46:01 driver-btm-soc.c:6496:bitmain_soc_init: special mode: disabled 2022-04-02 23:46:01 driver-btm-soc.c:6503:bitmain_soc_init: This is high performance mode 2022-04-02 23:46:01 driver-btm-soc.c:6508:bitmain_soc_init: last commit version: a70ae17 commit time: 2019-07-10 21:53:39 build: 2019-07-11 10:04:04 2022-04-02 23:46:01 driver-btm-soc.c:6529:bitmain_soc_init: Detect 256MB control board of XILINX 2022-04-02 23:46:01 driver-btm-soc.c:6532:bitmain_soc_init: Miner compile time: Thu Jul 11 09:57:07 CST 2019 type: Antminer S9 SE 2022-04-02 23:46:01 driver-btm-soc.c:838:check_chain: get_hash_on_plug is 0x7 2022-04-02 23:46:01 driver-btm-soc.c:850:check_chain: !! chain[0]is exist 2022-04-02 23:46:01 driver-btm-soc.c:850:check_chain: !! chain[1]is exist 2022-04-02 23:46:01 driver-btm-soc.c:850:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 59 59 59 56 4e 54 4e 56 00000090 56 54 54 56 56 56 54 4e 59 59 59 4e 56 59 59 56 000000a0 56 4e 54 4e 59 54 4e 4e 54 54 56 56 56 59 59 59 000000b0 59 4e 59 59 56 56 56 54 54 4e 54 54 56 56 56 59 000000c0 4e 59 59 4e 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff a7 14 00 00 20 ff ff ff 39 10 be a9 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 59 59 59 56 4e 54 4e 56 00000090 56 54 54 56 56 56 54 4e 59 59 59 4e 56 59 59 56 000000a0 56 4e 54 4e 59 54 4e 4e 54 54 56 56 56 59 59 59 000000b0 59 4e 59 59 56 56 56 54 54 4e 54 54 56 56 56 59 000000c0 4e 59 59 4e 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff a7 14 00 00 20 ff ff ff 39 10 be a9 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 59 59 59 56 4e 54 4e 56 00000090 56 54 54 56 56 56 54 4e 59 59 59 4e 56 59 59 56 000000a0 56 4e 54 4e 59 54 4e 4e 54 54 56 56 56 59 59 59 000000b0 59 4e 59 59 56 56 56 54 54 4e 54 54 56 56 56 59 000000c0 4e 59 59 4e 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff a7 14 00 00 20 ff ff ff 39 10 be a9
read chain[0] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[1] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[2] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
sweep config for eco mode: sweep_start_voltage: 8.60 max_aging_voltage: 8.90 sweep_min_freq: 300M sweep_max_freq: 380M
sweep config for hpf mode: sweep_start_voltage: 9.20 max_aging_voltage: 9.50 sweep_min_freq: 415M sweep_max_freq: 465M 2022-04-02 23:46:13 driver-btm-soc.c:838:check_chain: get_hash_on_plug is 0x7 2022-04-02 23:46:13 driver-btm-soc.c:850:check_chain: !! chain[0]is exist 2022-04-02 23:46:13 driver-btm-soc.c:850:check_chain: !! chain[1]is exist 2022-04-02 23:46:13 driver-btm-soc.c:850:check_chain: !! chain[2]is exist 2022-04-02 23:46:13 driver-btm-soc.c:5935:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390
chain 1 freq: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390
chain 2 freq: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390
2022-04-02 23:46:13 driver-btm-soc.c:6618:bitmain_soc_init: reset all... 2022-04-02 23:46:15 driver-btm-soc.c:6626:bitmain_soc_init: miner ID : 8154b50a5c208814 2022-04-02 23:46:15 driver-btm-soc.c:6329:init_miner_version: FPGA Version = 0xB00D 2022-04-02 23:46:34 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 2022-04-02 23:46:35 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 2022-04-02 23:46:36 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 2022-04-02 23:46:36 power.c:183:power_init: power init ... 2022-04-02 23:46:36 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[0] eeprom 2022-04-02 23:46:36 power.c:230:set_working_voltage_by_chain: chain[0] working_voltage = 9.500000 2022-04-02 23:46:36 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[1] eeprom 2022-04-02 23:46:36 power.c:230:set_working_voltage_by_chain: chain[1] working_voltage = 9.500000 2022-04-02 23:46:36 driver-btm-soc.c:5048:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[2] eeprom 2022-04-02 23:46:36 power.c:230:set_working_voltage_by_chain: chain[2] working_voltage = 9.500000 2022-04-02 23:46:36 driver-btm-soc.c:5724:update_highest_voltage: chain 0 hpf working voltage 9.20 2022-04-02 23:46:36 driver-btm-soc.c:5724:update_highest_voltage: chain 1 hpf working voltage 9.20 2022-04-02 23:46:36 driver-btm-soc.c:5724:update_highest_voltage: chain 2 hpf working voltage 9.20 2022-04-02 23:46:36 driver-btm-soc.c:5733:update_highest_voltage: open core at max voltage 9.94 2022-04-02 23:46:36 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to hightest voltage: 9.94 ... 2022-04-02 23:46:36 power.c:705:set_iic_power_by_voltage: now setting voltage to : 9.936000 2022-04-02 23:46:37 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to hightest voltage: 9.94 ... 2022-04-02 23:46:39 power.c:705:set_iic_power_by_voltage: now setting voltage to : 9.936000 2022-04-02 23:46:39 power.c:779:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to hightest voltage: 9.94 ... 2022-04-02 23:46:40 power.c:705:set_iic_power_by_voltage: now setting voltage to : 9.936000 2022-04-02 23:46:40 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[0] hash rate = 5287 2022-04-02 23:46:40 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[1] hash rate = 5287 2022-04-02 23:46:40 driver-btm-soc.c:1186:get_eeprom_total_hash_rate: chain[2] hash rate = 5287 2022-04-02 23:46:40 driver-btm-soc.c:1190:get_eeprom_total_hash_rate: total rate = 15861 2022-04-02 23:46:40 driver-btm-soc.c:1198:get_ideal_hash_rate: get ideal hash rate 15000 2022-04-02 23:46:40 eeprom.c:665:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:445 IC[001]:445 IC[002]:445 IC[003]:430 IC[004]:390 IC[005]:420 IC[006]:390 IC[007]:430 IC[008]:430 IC[009]:420 IC[010]:420 IC[011]:430 IC[012]:430 IC[013]:430 IC[014]:420 IC[015]:390 IC[016]:445 IC[017]:445 IC[018]:445 IC[019]:390 IC[020]:430 IC[021]:445 IC[022]:445 IC[023]:430 IC[024]:430 IC[025]:390 IC[026]:420 IC[027]:390 IC[028]:445 IC[029]:420 IC[030]:390 IC[031]:390 IC[032]:420 IC[033]:420 IC[034]:430 IC[035]:430 IC[036]:430 IC[037]:445 IC[038]:445 IC[039]:445 IC[040]:445 IC[041]:390 IC[042]:445 IC[043]:445 IC[044]:430 IC[045]:430 IC[046]:430 IC[047]:420 IC[048]:420 IC[049]:390 IC[050]:420 IC[051]:420 IC[052]:430 IC[053]:430 IC[054]:430 IC[055]:445 IC[056]:390 IC[057]:445 IC[058]:445 IC[059]:390 voltage in mode2: 9.20 V hash rate in mode2: 05287 GH/s
2022-04-02 23:46:40 eeprom.c:665:travel_eeprom_store: chain[1] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:445 IC[001]:445 IC[002]:445 IC[003]:430 IC[004]:390 IC[005]:420 IC[006]:390 IC[007]:430 IC[008]:430 IC[009]:420 IC[010]:420 IC[011]:430 IC[012]:430 IC[013]:430 IC[014]:420 IC[015]:390 IC[016]:445 IC[017]:445 IC[018]:445 IC[019]:390 IC[020]:430 IC[021]:445 IC[022]:445 IC[023]:430 IC[024]:430 IC[025]:390 IC[026]:420 IC[027]:390 IC[028]:445 IC[029]:420 IC[030]:390 IC[031]:390 IC[032]:420 IC[033]:420 IC[034]:430 IC[035]:430 IC[036]:430 IC[037]:445 IC[038]:445 IC[039]:445 IC[040]:445 IC[041]:390 IC[042]:445 IC[043]:445 IC[044]:430 IC[045]:430 IC[046]:430 IC[047]:420 IC[048]:420 IC[049]:390 IC[050]:420 IC[051]:420 IC[052]:430 IC[053]:430 IC[054]:430 IC[055]:445 IC[056]:390 IC[057]:445 IC[058]:445 IC[059]:390 voltage in mode2: 9.20 V hash rate in mode2: 05287 GH/s
2022-04-02 23:46:40 eeprom.c:665:travel_eeprom_store: chain[2] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:445 IC[001]:445 IC[002]:445 IC[003]:430 IC[004]:390 IC[005]:420 IC[006]:390 IC[007]:430 IC[008]:430 IC[009]:420 IC[010]:420 IC[011]:430 IC[012]:430 IC[013]:430 IC[014]:420 IC[015]:390 IC[016]:445 IC[017]:445 IC[018]:445 IC[019]:390 IC[020]:430 IC[021]:445 IC[022]:445 IC[023]:430 IC[024]:430 IC[025]:390 IC[026]:420 IC[027]:390 IC[028]:445 IC[029]:420 IC[030]:390 IC[031]:390 IC[032]:420 IC[033]:420 IC[034]:430 IC[035]:430 IC[036]:430 IC[037]:445 IC[038]:445 IC[039]:445 IC[040]:445 IC[041]:390 IC[042]:445 IC[043]:445 IC[044]:430 IC[045]:430 IC[046]:430 IC[047]:420 IC[048]:420 IC[049]:390 IC[050]:420 IC[051]:420 IC[052]:430 IC[053]:430 IC[054]:430 IC[055]:445 IC[056]:390 IC[057]:445 IC[058]:445 IC[059]:390 voltage in mode2: 9.20 V hash rate in mode2: 05287 GH/s
2022-04-02 23:46:40 driver-btm-soc.c:6669:bitmain_soc_init: fan_eft : 0 fan_pwm : 0 2022-04-02 23:46:40 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 0 2022-04-02 23:46:41 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 2022-04-02 23:47:12 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-04-02 23:47:14 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 0, find asic num = 60 2022-04-02 23:47:17 driver-btm-soc.c:4804:set_freq_by_chain: chain[0] set freq:100.00 2022-04-02 23:47:18 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 0 2022-04-02 23:47:18 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2022-04-02 23:47:18 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-04-02 23:47:18 temperature.c:513:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-04-02 23:47:18 temperature.c:741:calibration_sensor_offset: chain[0] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2022-04-02 23:47:18 temperature.c:791:calibration_sensor_offset: Chain[0] chip[31] middle temp offset=-4, typeID=55 2022-04-02 23:47:19 temperature.c:791:calibration_sensor_offset: Chain[0] chip[40] middle temp offset=-4, typeID=55 2022-04-02 23:47:19 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 1 2022-04-02 23:47:20 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-04-02 23:47:52 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-04-02 23:47:54 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 1, find asic num = 50 2022-04-02 23:47:54 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-04-02 23:47:55 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-04-02 23:47:58 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 1, find asic num = 50 2022-04-02 23:47:58 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-04-02 23:47:59 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-04-02 23:48:00 driver-btm-soc.c:3999:check_asic_num: check asic num with pre_open_core 2022-04-02 23:48:00 driver-btm-soc.c:3964:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0 2022-04-02 23:48:00 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-04-02 23:48:01 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-04-02 23:48:02 driver-btm-soc.c:3932:check_asic_num_without_power_off: Open 5 core for chain 1 2022-04-02 23:48:02 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 1 2022-04-02 23:48:03 driver-btm-soc.c:3938:check_asic_num_without_power_off: chain 1, find asic num = 50 2022-04-02 23:48:03 driver-btm-soc.c:3964:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1 2022-04-02 23:48:03 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-04-02 23:48:04 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-04-02 23:48:05 driver-btm-soc.c:3932:check_asic_num_without_power_off: Open 5 core for chain 1 2022-04-02 23:48:06 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 1 2022-04-02 23:48:07 driver-btm-soc.c:3938:check_asic_num_without_power_off: chain 1, find asic num = 50 2022-04-02 23:48:08 driver-btm-soc.c:4021:check_asic_num: chian 1 check asic number failed! 2022-04-02 23:48:08 driver-btm-soc.c:6358:bring_up_chain:
bring up chain 2 2022-04-02 23:48:08 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-04-02 23:48:40 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-04-02 23:48:41 driver-btm-soc.c:3991:check_asic_num: without pre_open_core chain 2, find asic num = 60 2022-04-02 23:48:45 driver-btm-soc.c:4804:set_freq_by_chain: chain[2] set freq:100.00 2022-04-02 23:48:45 driver-btm-soc.c:3917:pre_open_core_one_chain: for chain 2 2022-04-02 23:48:45 driver-btm-soc.c:4078:set_clock_delay_control: core_data = 0x06 2022-04-02 23:48:45 temperature.c:604:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-04-02 23:48:46 temperature.c:513:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-04-02 23:48:46 temperature.c:741:calibration_sensor_offset: chain[2] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2022-04-02 23:48:46 temperature.c:791:calibration_sensor_offset: Chain[2] chip[31] middle temp offset=-4, typeID=55 2022-04-02 23:48:46 temperature.c:791:calibration_sensor_offset: Chain[2] chip[40] middle temp offset=-4, typeID=55 2022-04-02 23:48:47 asic.c:1153:set_baud: set baud=1 2022-04-02 23:48:47 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2022-04-02 23:48:47 temperature.c:1933:detect_startup_environment_temperature: Environment temperature: [35] 2022-04-02 23:48:47 temperature.c:1943:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ... 2022-04-02 23:48:58 temperature.c:1933:detect_startup_environment_temperature: Environment temperature: [36] 2022-04-02 23:48:58 temperature.c:1943:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ... 2022-04-02 23:49:09 temperature.c:1933:detect_startup_environment_temperature: Environment temperature: [36] 2022-04-02 23:49:09 temperature.c:1943:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ... 2022-04-02 23:49:19 driver-btm-soc.c:4148:open_core_bm1393: Start Open Core!! 2022-04-02 23:49:23 driver-btm-soc.c:4215:open_core_bm1393: End Open Core!! 2022-04-02 23:49:23 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 125 2022-04-02 23:49:24 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 150 2022-04-02 23:49:25 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 175 2022-04-02 23:49:26 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 200 2022-04-02 23:49:27 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 225 2022-04-02 23:49:28 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 250 2022-04-02 23:49:29 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 275 2022-04-02 23:49:30 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 300 2022-04-02 23:49:31 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 325 2022-04-02 23:49:32 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 350 2022-04-02 23:49:33 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 375 2022-04-02 23:49:34 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 390 2022-04-02 23:49:35 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-02 23:49:35 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[0] increaseing the diff freq ... 2022-04-02 23:49:44 driver-btm-soc.c:5400:increase_freq_by_eeprom_slowly_by_chain: chain 0 final freq setting: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390 2022-04-02 23:49:44 power.c:1303:slowly_set_working_power_t11: set chain 0 to working voltage: now setting chain[0]-volt[09.89]-data[017] now setting chain[0]-volt[09.85]-data[018] now setting chain[0]-volt[09.80]-data[019] now setting chain[0]-volt[09.76]-data[020] now setting chain[0]-volt[09.72]-data[021] now setting 2022-04-02 23:49:56 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try! chain[0]-volt[09.65]-data[023] now setting chain[0]-volt[09.58]-data[025] now setting chain[0]-volt[09.54]-data[026] now setting chain[0]-volt[09.51]-data[027] 2022-04-02 23:50:08 power.c:1318:slowly_set_working_power_t11: done! 2022-04-02 23:50:08 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 125 2022-04-02 23:50:09 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 150 2022-04-02 23:50:10 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 175 2022-04-02 23:50:11 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 200 2022-04-02 23:50:12 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 225 2022-04-02 23:50:13 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 250 2022-04-02 23:50:14 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 275 2022-04-02 23:50:15 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 300 2022-04-02 23:50:16 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 325 2022-04-02 23:50:17 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 350 2022-04-02 23:50:18 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 375 2022-04-02 23:50:19 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 390 2022-04-02 23:50:20 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-02 23:50:20 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ...
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2338
Merit: 6501
be constructive or S.T.F.U
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 05, 2022, 02:06:01 AM |
|
Please use the code tag when posting the kernel logs. 2022-04-02 23:50:19 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 390 2022-04-02 23:50:20 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-02 23:50:20 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ... The kernel log is incomplete, are you sure all PSUs cables are plugged in? also, what is the AC voltage at the input side of your PSU?
|
|
|
|
Akhan.96
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 05, 2022, 04:28:08 PM |
|
Yes bro for this unit I saw a component detached from the hashboard itself. I have another unit, hashboard visually looks okay but has stopped working, the whole ASIC chain line is not showing in miner status, I'll attach the kernel log for it too. The ASIC was working fine with 15+Th/s and suddenly one of the hashboard stopped working. Please help. Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25672K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12632K (cceab000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 26/13, WL threshold: 4096, image sequence number: 1096145258 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 7893A978-0C61-4250-9E4B-39014213963B, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 3772/565, WL threshold: 4096, image sequence number: 2121478933 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID D1567B42-F8A6-4D25-B2FC-07792E17957C, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab00d In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2022-04-03 20:37:18.789] httpListenThread start ret=0 [2022-04-03 20:37:48.790] start listen on 6060 ... [2022-04-03 20:43:49.717] setStartTimePoint total_tv_start_sys=438 total_tv_end_sys=439
2022-04-03 20:37:18 driver-btm-soc.c:6520:bitmain_soc_init: This is Antminer S9 SE scan user version 2022-04-03 20:37:18 driver-btm-soc.c:6526:bitmain_soc_init: special mode: disabled 2022-04-03 20:37:18 driver-btm-soc.c:6533:bitmain_soc_init: This is high performance mode 2022-04-03 20:37:18 driver-btm-soc.c:6538:bitmain_soc_init: last commit version: 99791ac commit time: 2019-09-17 19:17:44 build: 2019-09-18 16:00:29 2022-04-03 20:37:18 driver-btm-soc.c:6559:bitmain_soc_init: Detect 256MB control board of XILINX 2022-04-03 20:37:18 driver-btm-soc.c:6562:bitmain_soc_init: Miner compile time: Wed Sep 18 15:51:07 CST 2019 type: Antminer S9 SE 2022-04-03 20:37:18 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7 2022-04-03 20:37:18 driver-btm-soc.c:851:check_chain: !! chain[0]is exist 2022-04-03 20:37:18 driver-btm-soc.c:851:check_chain: !! chain[1]is exist 2022-04-03 20:37:18 driver-btm-soc.c:851:check_chain: !! chain[2]is exist 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 59 59 59 56 4e 54 4e 56 00000090 56 54 54 56 56 56 54 4e 59 59 59 4e 56 59 59 56 000000a0 56 4e 54 4e 59 54 4e 4e 54 54 56 56 56 59 59 59 000000b0 59 4e 59 59 56 56 56 54 54 4e 54 54 56 56 56 59 000000c0 4e 59 59 4e 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff a7 14 00 00 20 ff ff ff 39 10 be a9 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 59 59 59 56 4e 54 4e 56 00000090 56 54 54 56 56 56 54 4e 59 59 59 4e 56 59 59 56 000000a0 56 4e 54 4e 59 54 4e 4e 54 54 56 56 56 59 59 59 000000b0 59 4e 59 59 56 56 56 54 54 4e 54 54 56 56 56 59 000000c0 4e 59 59 4e 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff a7 14 00 00 20 ff ff ff 39 10 be a9 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00000000 7e ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff 01 02 1f fc 28 fc ff 00000080 ff ff ff ff ff ff ff a0 59 59 59 56 4e 54 4e 56 00000090 56 54 54 56 56 56 54 4e 59 59 59 4e 56 59 59 56 000000a0 56 4e 54 4e 59 54 4e 4e 54 54 56 56 56 59 59 59 000000b0 59 4e 59 59 56 56 56 54 54 4e 54 54 56 56 56 59 000000c0 4e 59 59 4e 00 ff ff ff ff ff ff ff ff ff ff ff 000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000f0 ff ff ff ff a7 14 00 00 20 ff ff ff 39 10 be a9
read chain[0] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[1] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
read chain[2] hardware info: major type: 0 minor type: 4 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0
sweep config for eco mode: sweep_start_voltage: 8.60 max_aging_voltage: 8.90 sweep_min_freq: 300M sweep_max_freq: 380M
sweep config for hpf mode: sweep_start_voltage: 9.20 max_aging_voltage: 9.50 sweep_min_freq: 415M sweep_max_freq: 465M 2022-04-03 20:37:30 driver-btm-soc.c:839:check_chain: get_hash_on_plug is 0x7 2022-04-03 20:37:30 driver-btm-soc.c:851:check_chain: !! chain[0]is exist 2022-04-03 20:37:30 driver-btm-soc.c:851:check_chain: !! chain[1]is exist 2022-04-03 20:37:30 driver-btm-soc.c:851:check_chain: !! chain[2]is exist 2022-04-03 20:37:30 driver-btm-soc.c:5965:get_freq_result_from_eeprom: orginal chip freq: chain 0 freq: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390
chain 1 freq: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390
chain 2 freq: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390
2022-04-03 20:37:30 driver-btm-soc.c:6647:bitmain_soc_init: reset all... 2022-04-03 20:37:32 driver-btm-soc.c:6655:bitmain_soc_init: miner ID : 805275025c208854 2022-04-03 20:37:32 driver-btm-soc.c:6359:init_miner_version: FPGA Version = 0xB00D 2022-04-03 20:37:52 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[0] PIC software version: 177 2022-04-03 20:37:52 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[1] PIC software version: 177 2022-04-03 20:37:53 dspic33ep16gs202.c:486:get_pic_software_version_all_chain: chain[2] PIC software version: 177 2022-04-03 20:37:53 power.c:185:power_init: power init ... 2022-04-03 20:37:53 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[0] eeprom 2022-04-03 20:37:53 power.c:232:set_working_voltage_by_chain: chain[0] working_voltage = 9.50 2022-04-03 20:37:53 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[1] eeprom 2022-04-03 20:37:53 power.c:232:set_working_voltage_by_chain: chain[1] working_voltage = 9.50 2022-04-03 20:37:53 driver-btm-soc.c:5060:get_working_voltage_from_eeprom: get working vol [ 9.50] from chain[2] eeprom 2022-04-03 20:37:53 power.c:232:set_working_voltage_by_chain: chain[2] working_voltage = 9.50 2022-04-03 20:37:53 driver-btm-soc.c:5754:update_highest_voltage: chain 0 hpf working voltage 9.20 2022-04-03 20:37:53 driver-btm-soc.c:5754:update_highest_voltage: chain 1 hpf working voltage 9.20 2022-04-03 20:37:53 driver-btm-soc.c:5754:update_highest_voltage: chain 2 hpf working voltage 9.20 2022-04-03 20:37:53 driver-btm-soc.c:5763:update_highest_voltage: open core at max voltage 9.94 2022-04-03 20:37:53 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 09.94 ... 2022-04-03 20:37:53 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 2022-04-03 20:37:54 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 09.94 ... 2022-04-03 20:37:56 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 2022-04-03 20:37:56 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[2] setting to highest voltage: 09.94 ... 2022-04-03 20:37:57 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 2022-04-03 20:37:57 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[0] hash rate = 5287 2022-04-03 20:37:57 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[1] hash rate = 5287 2022-04-03 20:37:57 driver-btm-soc.c:1188:get_eeprom_total_hash_rate: chain[2] hash rate = 5287 2022-04-03 20:37:57 driver-btm-soc.c:1192:get_eeprom_total_hash_rate: total rate = 15861 2022-04-03 20:37:57 driver-btm-soc.c:1200:get_ideal_hash_rate: get ideal hash rate 15000 2022-04-03 20:37:57 eeprom.c:669:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:445 IC[001]:445 IC[002]:445 IC[003]:430 IC[004]:390 IC[005]:420 IC[006]:390 IC[007]:430 IC[008]:430 IC[009]:420 IC[010]:420 IC[011]:430 IC[012]:430 IC[013]:430 IC[014]:420 IC[015]:390 IC[016]:445 IC[017]:445 IC[018]:445 IC[019]:390 IC[020]:430 IC[021]:445 IC[022]:445 IC[023]:430 IC[024]:430 IC[025]:390 IC[026]:420 IC[027]:390 IC[028]:445 IC[029]:420 IC[030]:390 IC[031]:390 IC[032]:420 IC[033]:420 IC[034]:430 IC[035]:430 IC[036]:430 IC[037]:445 IC[038]:445 IC[039]:445 IC[040]:445 IC[041]:390 IC[042]:445 IC[043]:445 IC[044]:430 IC[045]:430 IC[046]:430 IC[047]:420 IC[048]:420 IC[049]:390 IC[050]:420 IC[051]:420 IC[052]:430 IC[053]:430 IC[054]:430 IC[055]:445 IC[056]:390 IC[057]:445 IC[058]:445 IC[059]:390 voltage in mode2: 9.20 V hash rate in mode2: 05287 GH/s
2022-04-03 20:37:57 eeprom.c:669:travel_eeprom_store: chain[1] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:445 IC[001]:445 IC[002]:445 IC[003]:430 IC[004]:390 IC[005]:420 IC[006]:390 IC[007]:430 IC[008]:430 IC[009]:420 IC[010]:420 IC[011]:430 IC[012]:430 IC[013]:430 IC[014]:420 IC[015]:390 IC[016]:445 IC[017]:445 IC[018]:445 IC[019]:390 IC[020]:430 IC[021]:445 IC[022]:445 IC[023]:430 IC[024]:430 IC[025]:390 IC[026]:420 IC[027]:390 IC[028]:445 IC[029]:420 IC[030]:390 IC[031]:390 IC[032]:420 IC[033]:420 IC[034]:430 IC[035]:430 IC[036]:430 IC[037]:445 IC[038]:445 IC[039]:445 IC[040]:445 IC[041]:390 IC[042]:445 IC[043]:445 IC[044]:430 IC[045]:430 IC[046]:430 IC[047]:420 IC[048]:420 IC[049]:390 IC[050]:420 IC[051]:420 IC[052]:430 IC[053]:430 IC[054]:430 IC[055]:445 IC[056]:390 IC[057]:445 IC[058]:445 IC[059]:390 voltage in mode2: 9.20 V hash rate in mode2: 05287 GH/s
2022-04-03 20:37:57 eeprom.c:669:travel_eeprom_store: chain[2] data in eeprom is: magic number: 0x7e freq data per ASIC: IC[000]:1275 IC[001]:1275 IC[002]:1275 IC[003]:1275 IC[004]:1275 IC[005]:1275 IC[006]:1275 IC[007]:1275 IC[008]:1275 IC[009]:1275 IC[010]:1275 IC[011]:1275 IC[012]:1275 IC[013]:1275 IC[014]:1275 IC[015]:1275 IC[016]:1275 IC[017]:1275 IC[018]:1275 IC[019]:1275 IC[020]:1275 IC[021]:1275 IC[022]:1275 IC[023]:1275 IC[024]:1275 IC[025]:1275 IC[026]:1275 IC[027]:1275 IC[028]:1275 IC[029]:1275 IC[030]:1275 IC[031]:1275 IC[032]:1275 IC[033]:1275 IC[034]:1275 IC[035]:1275 IC[036]:1275 IC[037]:1275 IC[038]:1275 IC[039]:1275 IC[040]:1275 IC[041]:1275 IC[042]:1275 IC[043]:1275 IC[044]:1275 IC[045]:1275 IC[046]:1275 IC[047]:1275 IC[048]:1275 IC[049]:1275 IC[050]:1275 IC[051]:1275 IC[052]:1275 IC[053]:1275 IC[054]:1275 IC[055]:1275 IC[056]:1275 IC[057]:1275 IC[058]:1275 IC[059]:1275 voltage: 11.10 V hash rate: -0001 GH/s
freq data per ASIC in mode2: IC[000]:445 IC[001]:445 IC[002]:445 IC[003]:430 IC[004]:390 IC[005]:420 IC[006]:390 IC[007]:430 IC[008]:430 IC[009]:420 IC[010]:420 IC[011]:430 IC[012]:430 IC[013]:430 IC[014]:420 IC[015]:390 IC[016]:445 IC[017]:445 IC[018]:445 IC[019]:390 IC[020]:430 IC[021]:445 IC[022]:445 IC[023]:430 IC[024]:430 IC[025]:390 IC[026]:420 IC[027]:390 IC[028]:445 IC[029]:420 IC[030]:390 IC[031]:390 IC[032]:420 IC[033]:420 IC[034]:430 IC[035]:430 IC[036]:430 IC[037]:445 IC[038]:445 IC[039]:445 IC[040]:445 IC[041]:390 IC[042]:445 IC[043]:445 IC[044]:430 IC[045]:430 IC[046]:430 IC[047]:420 IC[048]:420 IC[049]:390 IC[050]:420 IC[051]:420 IC[052]:430 IC[053]:430 IC[054]:430 IC[055]:445 IC[056]:390 IC[057]:445 IC[058]:445 IC[059]:390 voltage in mode2: 9.20 V hash rate in mode2: 05287 GH/s
2022-04-03 20:37:57 driver-btm-soc.c:6698:bitmain_soc_init: fan_eft : 0 fan_pwm : 0 2022-04-03 20:37:57 driver-btm-soc.c:6388:bring_up_chain:
bring up chain 0 2022-04-03 20:37:58 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 2022-04-03 20:38:30 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-04-03 20:38:31 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 0, find asic num = 60 2022-04-03 20:38:34 driver-btm-soc.c:4816:set_freq_by_chain: chain[0] set freq:100.00 2022-04-03 20:38:35 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 0 2022-04-03 20:38:35 driver-btm-soc.c:4090:set_clock_delay_control: core_data = 0x06 2022-04-03 20:38:35 temperature.c:614:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-04-03 20:38:35 temperature.c:523:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-04-03 20:38:35 temperature.c:751:calibration_sensor_offset: chain[0] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2022-04-03 20:38:35 temperature.c:801:calibration_sensor_offset: Chain[0] chip[31] middle temp offset=-4, typeID=55 2022-04-03 20:38:36 temperature.c:801:calibration_sensor_offset: Chain[0] chip[40] middle temp offset=-4, typeID=55 2022-04-03 20:38:36 driver-btm-soc.c:6388:bring_up_chain:
bring up chain 1 2022-04-03 20:38:37 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 2022-04-03 20:39:09 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-04-03 20:39:10 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 1, find asic num = 60 2022-04-03 20:39:13 driver-btm-soc.c:4816:set_freq_by_chain: chain[1] set freq:100.00 2022-04-03 20:39:14 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 1 2022-04-03 20:39:14 driver-btm-soc.c:4090:set_clock_delay_control: core_data = 0x06 2022-04-03 20:39:14 temperature.c:614:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-04-03 20:39:14 temperature.c:523:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-04-03 20:39:14 temperature.c:751:calibration_sensor_offset: chain[1] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2022-04-03 20:39:15 temperature.c:801:calibration_sensor_offset: Chain[1] chip[31] middle temp offset=-4, typeID=55 2022-04-03 20:39:15 temperature.c:801:calibration_sensor_offset: Chain[1] chip[40] middle temp offset=-4, typeID=55 2022-04-03 20:39:15 driver-btm-soc.c:6388:bring_up_chain:
bring up chain 2 2022-04-03 20:39:16 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-04-03 20:39:48 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-04-03 20:39:49 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 2, find asic num = 60 2022-04-03 20:39:53 driver-btm-soc.c:4816:set_freq_by_chain: chain[2] set freq:100.00 2022-04-03 20:39:53 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 2 2022-04-03 20:39:53 driver-btm-soc.c:4090:set_clock_delay_control: core_data = 0x06 2022-04-03 20:39:53 temperature.c:614:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-04-03 20:39:53 temperature.c:523:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-04-03 20:39:53 temperature.c:751:calibration_sensor_offset: chain[2] temp info is bad, reload from eeprom.. sensor type = 1,sensor num = 2 sensor pos: 31 40 0 0 0 0 sensor offset: -4 -4 0 0 0 0 2022-04-03 20:39:54 temperature.c:801:calibration_sensor_offset: Chain[2] chip[31] middle temp offset=-4, typeID=55 2022-04-03 20:39:54 temperature.c:801:calibration_sensor_offset: Chain[2] chip[40] middle temp offset=-4, typeID=55 2022-04-03 20:39:55 asic.c:1153:set_baud: set baud=1 2022-04-03 20:39:55 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2022-04-03 20:39:56 temperature.c:2064:detect_startup_environment_temperature: Environment temperature: [33] 2022-04-03 20:39:56 temperature.c:2081:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 1 times ... 2022-04-03 20:40:07 temperature.c:2064:detect_startup_environment_temperature: Environment temperature: [33] 2022-04-03 20:40:07 temperature.c:2081:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 2 times ... 2022-04-03 20:40:18 temperature.c:2064:detect_startup_environment_temperature: Environment temperature: [33] 2022-04-03 20:40:18 temperature.c:2081:detect_startup_environment_temperature: Enter 10 secs to cool down hash board, 3 times ... 2022-04-03 20:40:28 driver-btm-soc.c:4160:open_core_bm1393: Start Open Core!! 2022-04-03 20:40:34 driver-btm-soc.c:4227:open_core_bm1393: End Open Core!! 2022-04-03 20:40:35 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 125 2022-04-03 20:40:37 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 150 2022-04-03 20:40:39 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 175 2022-04-03 20:40:42 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 200 2022-04-03 20:40:44 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 225 2022-04-03 20:40:46 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 250 2022-04-03 20:40:48 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 275 2022-04-03 20:40:50 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 300 2022-04-03 20:40:52 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 325 2022-04-03 20:40:54 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 350 2022-04-03 20:40:56 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 375 2022-04-03 20:40:59 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 390 2022-04-03 20:41:01 driver-btm-soc.c:5383:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-03 20:41:01 driver-btm-soc.c:5389:increase_freq_by_eeprom_slowly_by_chain: chain[0] increaseing the diff freq ... 2022-04-03 20:41:11 driver-btm-soc.c:5418:increase_freq_by_eeprom_slowly_by_chain: chain 0 final freq setting: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390 2022-04-03 20:41:11 power.c:1309:slowly_set_working_power_t11: set chain 0 to working voltage: now setting chain[0]-volt[09.89]-data[017] now setting chain[0]-volt[09.80]-data[019] now setting chain[0]-volt[09.72]-data[021] now setting chain[0]-volt[09.65]-data[023] now setting chain[0]-volt[09.58]-data[025] now setting chain[0]-volt[09.54]-data[026] now setting chain[0]-volt[09.51]-data[027] 2022-04-03 20:41:40 power.c:1331:slowly_set_working_power_t11: done! 2022-04-03 20:41:40 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 125 2022-04-03 20:41:42 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 150 2022-04-03 20:41:44 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 175 2022-04-03 20:41:46 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 200 2022-04-03 20:41:49 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 225 2022-04-03 20:41:51 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 250 2022-04-03 20:41:53 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 275 2022-04-03 20:41:55 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 300 2022-04-03 20:41:57 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 325 2022-04-03 20:41:59 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 350 2022-04-03 20:42:01 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 375 2022-04-03 20:42:03 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 390 2022-04-03 20:42:05 driver-btm-soc.c:5383:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-03 20:42:05 driver-btm-soc.c:5389:increase_freq_by_eeprom_slowly_by_chain: chain[1] increaseing the diff freq ... 2022-04-03 20:42:16 driver-btm-soc.c:5418:increase_freq_by_eeprom_slowly_by_chain: chain 1 final freq setting: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390 2022-04-03 20:42:16 power.c:1309:slowly_set_working_power_t11: set chain 1 to working voltage: now setting chain[1]-volt[09.89]-data[017] now setting chain[1]-volt[09.80]-data[019] now setting chain[1]-volt[09.72]-data[021] now setting chain[1]-volt[09.65]-data[023] now setting chain[1]-volt[09.58]-data[025] now setting chain[1]-volt[09.54]-data[026] now setting chain[1]-volt[09.51]-data[027] 2022-04-03 20:42:45 power.c:1331:slowly_set_working_power_t11: done! 2022-04-03 20:42:45 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 125 2022-04-03 20:42:48 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 150 2022-04-03 20:42:50 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 175 2022-04-03 20:42:52 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 200 2022-04-03 20:42:54 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 225 2022-04-03 20:42:56 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 250 2022-04-03 20:42:58 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 275 2022-04-03 20:43:00 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 300 2022-04-03 20:43:02 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 325 2022-04-03 20:43:05 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 350 2022-04-03 20:43:07 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 375 2022-04-03 20:43:09 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 390 2022-04-03 20:43:11 driver-btm-soc.c:5383:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-03 20:43:11 driver-btm-soc.c:5389:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ... 2022-04-03 20:43:22 driver-btm-soc.c:5418:increase_freq_by_eeprom_slowly_by_chain: chain 2 final freq setting: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390 2022-04-03 20:43:22 power.c:1309:slowly_set_working_power_t11: set chain 2 to working voltage: now setting chain[2]-volt[09.89]-data[017] now setting chain[2]-volt[09.80]-data[019] now setting 2022-04-03 20:43:33 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try! chain[2]-volt[09.72]-data[021] now setting chain[2]-volt[09.65]-data[023] now setting chain[2]-volt[09.58]-data[025] now setting 2022-04-03 20:43:45 dspic33ep16gs202.c:276:dsPIC33EP16GS202_set_pic_voltage: ERROR! failed on Chain[2] after 3 times try! chain[2]-volt[09.54]-data[026] now setting chain[2]-volt[09.51]-data[027] 2022-04-03 20:43:49 power.c:1331:slowly_set_working_power_t11: done! 2022-04-03 20:43:49 driver-btm-soc.c:5112:set_timeout: freq 445 final timeout=294 2022-04-03 20:43:49 driver-btm-soc.c:2920:low_temp_process_parm_init: chip miner_type = [4] 2022-04-03 20:43:49 driver-btm-soc.c:2920:low_temp_process_parm_init: chip miner_type = [4] 2022-04-03 20:43:49 driver-btm-soc.c:2920:low_temp_process_parm_init: chip miner_type = [4] 2022-04-03 20:43:49 driver-btm-soc.c:3359:check_system_work: check system thread start... 2022-04-03 20:43:49 driver-btm-soc.c:3376:check_system_work: low_bringup_pcb_temp_threshhold = 28 2022-04-03 20:43:49 driver-btm-soc.c:3377:check_system_work: recovery_working_vol_low_temp = 30, recovery_working_vol_high_temp = 35 2022-04-03 20:43:49 driver-btm-soc.c:3378:check_system_work: delta_voltage = 0.10 2022-04-03 20:43:49 driver-btm-soc.c:6810:bitmain_soc_init: Init done! 2022-04-03 20:43:49 driver-btm-soc.c:7429:bitmain_soc_prepare: bitmain soc init success. 2022-04-03 20:43:50 temperature.c:1525:read_temp_func: bring_up_pcb_temp = 39 2022-04-03 20:43:55 util.c:2178:process_version_mask: Pool 0 Version num is 2 2022-04-03 20:43:55 driver-btm-soc.c:7104:send_job: Version num 2 2022-04-03 20:44:08 driver-btm-soc.c:3541:check_system_work: set reopen algorith parameters... 2022-04-03 20:47:51 driver-btm-soc.c:3279:decrease_voltage_at_high_temp: decrease volt for max chip temp is 96 2022-04-03 20:47:51 power.c:246:set_customer_voltage_by_chain: chain[0] customer_voltage = 9.30 2022-04-03 20:47:51 power.c:246:set_customer_voltage_by_chain: chain[1] customer_voltage = 9.30 2022-04-03 20:47:51 power.c:246:set_customer_voltage_by_chain: chain[2] customer_voltage = 9.30 2022-04-03 20:47:51 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage: now setting chain[0]-volt[09.48]-data[028] chain[1]-volt[09.48]-data[028] chain[2]-volt[09.48]-data[028] now setting chain[0]-volt[09.45]-data[029] chain[1]-volt[09.45]-data[029] chain[2]-volt[09.45]-data[029] now setting chain[0]-volt[09.42]-data[030] chain[1]-volt[09.42]-data[030] chain[2]-volt[09.42]-data[030] now setting chain[0]-volt[09.39]-data[031] chain[1]-volt[09.39]-data[031] chain[2]-volt[09.39]-data[031] now setting chain[0]-volt[09.37]-data[032] chain[1]-volt[09.37]-data[032] chain[2]-volt[09.37]-data[032] now setting chain[0]-volt[09.34]-data[033] chain[1]-volt[09.34]-data[033] chain[2]-volt[09.34]-data[033] now setting chain[0]-volt[09.32]-data[034] chain[1]-volt[09.32]-data[034] chain[2]-volt[09.32]-data[034] 2022-04-03 20:48:11 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end! now setting chain[0]-volt[09.30]-data[034] chain[1]-volt[09.30]-data[034] chain[2]-volt[09.30]-data[034] 2022-04-03 20:49:11 eeprom.c:917:eeprom_get_inbalance_info: error: chain[0] inbalance num is 255, more than MAX_OFFSET 4 2022-04-03 20:49:11 driver-btm-soc.c:2500:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 2022-04-03 20:49:11 eeprom.c:917:eeprom_get_inbalance_info: error: chain[1] inbalance num is 255, more than MAX_OFFSET 4 2022-04-03 20:49:11 driver-btm-soc.c:2500:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 2022-04-03 20:49:11 eeprom.c:917:eeprom_get_inbalance_info: error: chain[2] inbalance num is 255, more than MAX_OFFSET 4 2022-04-03 20:49:11 driver-btm-soc.c:2500:is_domain_imbalance: eeprom info not correct! ret = 0, len = 0 2022-04-03 20:49:11 driver-btm-soc.c:2513:is_domain_imbalance: dumping inbalance domain info... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2022-04-03 21:14:35 driver-btm-soc.c:3510:check_system_work: The avg rate is 15355 in 30 mins, PCB temperature between 39 ~ 74 2022-04-03 21:45:03 driver-btm-soc.c:3510:check_system_work: The avg rate is 15467 in 30 mins, PCB temperature between 40 ~ 74 2022-04-03 22:15:31 driver-btm-soc.c:3510:check_system_work: The avg rate is 15457 in 30 mins, PCB temperature between 40 ~ 75 2022-04-03 22:46:00 driver-btm-soc.c:3510:check_system_work: The avg rate is 15433 in 30 mins, PCB temperature between 41 ~ 75 2022-04-03 23:16:28 driver-btm-soc.c:3510:check_system_work: The avg rate is 15522 in 30 mins, PCB temperature between 41 ~ 75 2022-04-03 23:46:57 driver-btm-soc.c:3510:check_system_work: The avg rate is 15372 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 00:17:26 driver-btm-soc.c:3510:check_system_work: The avg rate is 15497 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 00:32:40 driver-btm-soc.c:3555:check_system_work: start to reopen 2022-04-04 00:32:40 driver-btm-soc.c:6911:re_open_core_by_chain:
reopen chain 0, current pwm 100 2022-04-04 00:32:42 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[0] setting to highest voltage: 09.94 ... 2022-04-04 00:32:42 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 2022-04-04 00:32:43 asic.c:1176:set_baud_by_chain: chain 0 set baud=26 2022-04-04 00:32:43 driver-btm-soc.c:6388:bring_up_chain:
bring up chain 0 2022-04-04 00:32:43 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff9 2022-04-04 00:32:44 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-04-04 00:32:45 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 0, find asic num = 60 2022-04-04 00:32:48 driver-btm-soc.c:4816:set_freq_by_chain: chain[0] set freq:100.00 2022-04-04 00:32:49 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 0 2022-04-04 00:32:49 driver-btm-soc.c:4090:set_clock_delay_control: core_data = 0x06 2022-04-04 00:32:49 temperature.c:614:is_eeprom_tempsensor_data_correct: sensor_num 2, sensor pos = 31, 40, 0, 0 2022-04-04 00:32:50 temperature.c:801:calibration_sensor_offset: Chain[0] chip[31] middle temp offset=-4, typeID=55 2022-04-04 00:32:50 temperature.c:801:calibration_sensor_offset: Chain[0] chip[40] middle temp offset=-4, typeID=55 2022-04-04 00:32:50 asic.c:1176:set_baud_by_chain: chain 0 set baud=1 2022-04-04 00:32:51 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2022-04-04 00:32:51 driver-btm-soc.c:4160:open_core_bm1393: Start Open Core!! 2022-04-04 00:32:53 driver-btm-soc.c:4227:open_core_bm1393: End Open Core!! 2022-04-04 00:32:53 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 125 2022-04-04 00:32:55 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 150 2022-04-04 00:32:57 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 175 2022-04-04 00:32:59 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 200 2022-04-04 00:33:01 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 225 2022-04-04 00:33:03 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 250 2022-04-04 00:33:05 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 275 2022-04-04 00:33:08 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 300 2022-04-04 00:33:10 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 325 2022-04-04 00:33:12 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 350 2022-04-04 00:33:14 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 375 2022-04-04 00:33:16 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[0] increase to 390 2022-04-04 00:33:18 driver-btm-soc.c:5383:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-04 00:33:18 driver-btm-soc.c:5389:increase_freq_by_eeprom_slowly_by_chain: chain[0] increaseing the diff freq ... 2022-04-04 00:33:29 driver-btm-soc.c:5418:increase_freq_by_eeprom_slowly_by_chain: chain 0 final freq setting: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390 2022-04-04 00:33:29 driver-btm-soc.c:5112:set_timeout: freq 445 final timeout=294 2022-04-04 00:33:30 driver-btm-soc.c:6938:re_open_core_by_chain: reopen chain 0 finished, chain 0 chip temp 66 - 86 2022-04-04 00:33:30 driver-btm-soc.c:6939:re_open_core_by_chain: all chain chip temp 65 - 98 2022-04-04 00:33:30 power.c:996:slowly_set_iic_power_to_working_voltage_by_chain: chain[0] slowly setting to voltage: 09.50 ... 2022-04-04 00:33:31 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.94 2022-04-04 00:33:37 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.89 2022-04-04 00:33:40 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.80 2022-04-04 00:33:43 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.72 2022-04-04 00:33:47 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.65 2022-04-04 00:33:48 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try! 2022-04-04 00:33:52 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.58 2022-04-04 00:33:55 power.c:728:set_iic_power_by_iic_data: now setting voltage to : 09.54 2022-04-04 00:33:56 driver-btm-soc.c:6955:re_open_core_by_chain: re_open_core done! 2022-04-04 00:34:26 driver-btm-soc.c:6911:re_open_core_by_chain:
reopen chain 1, current pwm 100 2022-04-04 00:34:29 power.c:781:set_iic_power_to_highest_voltage_by_chain: chain[1] setting to highest voltage: 09.94 ... 2022-04-04 00:34:30 power.c:707:set_iic_power_by_voltage: now setting voltage to : 09.94 2022-04-04 00:34:30 asic.c:1176:set_baud_by_chain: chain 1 set baud=26 2022-04-04 00:34:30 driver-btm-soc.c:6388:bring_up_chain:
bring up chain 1 2022-04-04 00:34:30 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-04-04 00:34:31 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-04-04 00:34:33 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 1, find asic num = 59 2022-04-04 00:34:33 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-04-04 00:34:34 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-04-04 00:34:37 driver-btm-soc.c:4003:check_asic_num: without pre_open_core chain 1, find asic num = 59 2022-04-04 00:34:37 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-04-04 00:34:38 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-04-04 00:34:39 driver-btm-soc.c:4011:check_asic_num: check asic num with pre_open_core 2022-04-04 00:34:39 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0 2022-04-04 00:34:39 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-04-04 00:34:40 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-04-04 00:34:41 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 1 2022-04-04 00:34:41 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 1 2022-04-04 00:34:43 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 1, find asic num = 59 2022-04-04 00:34:43 driver-btm-soc.c:3976:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1 2022-04-04 00:34:43 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-04-04 00:34:44 zynq.c:212:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-04-04 00:34:45 driver-btm-soc.c:3944:check_asic_num_without_power_off: Open 5 core for chain 1 2022-04-04 00:34:45 driver-btm-soc.c:3929:pre_open_core_one_chain: for chain 1 2022-04-04 00:34:46 driver-btm-soc.c:3950:check_asic_num_without_power_off: chain 1, find asic num = 59 2022-04-04 00:34:47 driver-btm-soc.c:4033:check_asic_num: chian 1 check asic number failed! 2022-04-04 00:34:47 asic.c:1176:set_baud_by_chain: chain 1 set baud=1 2022-04-04 00:34:47 asic.c:1269:set_asic_ticket_mask: set ticket mask 63 2022-04-04 00:34:47 driver-btm-soc.c:4160:open_core_bm1393: Start Open Core!! 2022-04-04 00:34:47 driver-btm-soc.c:4227:open_core_bm1393: End Open Core!! 2022-04-04 00:34:47 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 125 2022-04-04 00:34:49 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 150 2022-04-04 00:34:51 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 175 2022-04-04 00:34:52 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 200 2022-04-04 00:34:54 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 225 2022-04-04 00:34:56 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 250 2022-04-04 00:34:58 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 275 2022-04-04 00:34:59 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 300 2022-04-04 00:35:01 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 325 2022-04-04 00:35:03 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 350 2022-04-04 00:35:05 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 375 2022-04-04 00:35:06 driver-btm-soc.c:5367:increase_freq_by_eeprom_slowly_by_chain: chain[1] increase to 390 2022-04-04 00:35:08 driver-btm-soc.c:5383:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-04 00:35:08 driver-btm-soc.c:5389:increase_freq_by_eeprom_slowly_by_chain: chain[1] increaseing the diff freq ... 2022-04-04 00:35:16 driver-btm-soc.c:5418:increase_freq_by_eeprom_slowly_by_chain: chain 1 final freq setting: 445 445 445 430 390 420 390 430 430 420 420 430 430 430 420 390 445 445 445 390 430 445 445 430 430 390 420 390 445 420 390 390 420 420 430 430 430 445 445 445 445 390 445 445 430 430 430 420 420 390 420 420 430 430 430 445 390 445 445 390 2022-04-04 00:35:16 driver-btm-soc.c:5112:set_timeout: freq 445 final timeout=294 2022-04-04 00:35:17 driver-btm-soc.c:6938:re_open_core_by_chain: reopen chain 1 finished, chain 1 chip temp 73 - 94 2022-04-04 00:35:17 driver-btm-soc.c:6939:re_open_core_by_chain: all chain chip temp 64 - 96 2022-04-04 00:35:17 power.c:988:slowly_set_iic_power_to_working_voltage_by_chain: error! chain[1] does not exist! 2022-04-04 00:35:17 driver-btm-soc.c:6955:re_open_core_by_chain: re_open_core done! 2022-04-04 00:35:47 driver-btm-soc.c:3646:check_system_work: Reboot cost 187 sec ! 2022-04-04 00:35:47 driver-btm-soc.c:3657:check_system_work: re_open_core [1] times! 2022-04-04 00:35:47 power.c:1258:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage: now setting chain[0]-volt[09.51]-data[027] chain[2]-volt[09.51]-data[027] 2022-04-04 00:35:49 power.c:1278:slowly_set_iic_power_voltage_t11: parallel set all chain to working voltage end! now setting chain[0]-volt[09.50]-data[027] chain[2]-volt[09.50]-data[027] 2022-04-04 00:51:03 driver-btm-soc.c:3510:check_system_work: The avg rate is 11522 in 30 mins, PCB temperature between 41 ~ 76 2022-04-04 01:21:30 driver-btm-soc.c:3510:check_system_work: The avg rate is 10375 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 01:51:58 driver-btm-soc.c:3510:check_system_work: The avg rate is 10278 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 02:22:26 driver-btm-soc.c:3510:check_system_work: The avg rate is 10228 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 02:52:54 driver-btm-soc.c:3510:check_system_work: The avg rate is 10252 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 03:23:22 driver-btm-soc.c:3510:check_system_work: The avg rate is 10340 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 03:53:50 driver-btm-soc.c:3510:check_system_work: The avg rate is 10359 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 04:24:18 driver-btm-soc.c:3510:check_system_work: The avg rate is 10202 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 04:54:45 driver-btm-soc.c:3510:check_system_work: The avg rate is 10208 in 30 mins, PCB temperature between 41 ~ 75 2022-04-04 05:25:13 driver-btm-soc.c:3510:check_system_work: The avg rate is 10270 in 30 mins, PCB temperature between 42 ~ 75 2022-04-04 05:55:40 driver-btm-soc.c:3510:check_system_work: The avg rate is 10245 in 30 mins, PCB temperature between 42 ~ 75 2022-04-04 06:26:08 driver-btm-soc.c:3510:check_system_work: The avg rate is 10325 in 30 mins, PCB temperature between 42 ~ 76 2022-04-04 06:56:36 driver-btm-soc.c:3510:check_system_work: The avg rate is 10180 in 30 mins, PCB temperature between 42 ~ 76 2022-04-04 07:27:04 driver-btm-soc.c:3510:check_system_work: The avg rate is 10216 in 30 mins, PCB temperature between 42 ~ 76 2022-04-04 07:57:32 driver-btm-soc.c:3510:check_system_work: The avg rate is 10171 in 30 mins, PCB temperature between 42 ~ 76 2022-04-04 08:28:00 driver-btm-soc.c:3510:check_system_work: The avg rate is 10216 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 08:58:28 driver-btm-soc.c:3510:check_system_work: The avg rate is 10070 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 09:28:55 driver-btm-soc.c:3510:check_system_work: The avg rate is 10206 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 09:59:23 driver-btm-soc.c:3510:check_system_work: The avg rate is 10319 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 10:29:51 driver-btm-soc.c:3510:check_system_work: The avg rate is 10189 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 11:00:19 driver-btm-soc.c:3510:check_system_work: The avg rate is 10302 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 11:30:46 driver-btm-soc.c:3510:check_system_work: The avg rate is 10141 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 12:01:14 driver-btm-soc.c:3510:check_system_work: The avg rate is 10266 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 12:31:42 driver-btm-soc.c:3510:check_system_work: The avg rate is 10219 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 13:02:10 driver-btm-soc.c:3510:check_system_work: The avg rate is 10080 in 30 mins, PCB temperature between 43 ~ 78 2022-04-04 13:32:38 driver-btm-soc.c:3510:check_system_work: The avg rate is 10114 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 14:03:06 driver-btm-soc.c:3510:check_system_work: The avg rate is 10318 in 30 mins, PCB temperature between 43 ~ 77 2022-04-04 14:33:33 driver-btm-soc.c:3510:check_system_work: The avg rate is 10136 in 30 mins, PCB temperature between 43 ~ 77 Please use the code tag when posting the kernel logs. 2022-04-02 23:50:19 driver-btm-soc.c:5355:increase_freq_by_eeprom_slowly_by_chain: chain[2] increase to 390 2022-04-02 23:50:20 driver-btm-soc.c:5365:increase_freq_by_eeprom_slowly_by_chain: max = 445 ,min = 390 2022-04-02 23:50:20 driver-btm-soc.c:5371:increase_freq_by_eeprom_slowly_by_chain: chain[2] increaseing the diff freq ... The kernel log is incomplete, are you sure all PSUs cables are plugged in? also, what is the AC voltage at the input side of your PSU?
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2338
Merit: 6501
be constructive or S.T.F.U
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 06, 2022, 03:17:28 AM |
|
Yes bro for this unit I saw a component detached from the hashboard itself. I have another unit, hashboard visually looks okay but has stopped working, the whole ASIC chain line is not showing in miner status, I'll attach the kernel log for it too. The ASIC was working fine with 15+Th/s and suddenly one of the hashboard stopped working. Please help.
Please fix your first post, add the kernel log inside a code tag. The issue with the latest kernel you posted is in this line 2022-04-04 00:33:48 dspic33ep16gs202.c:213:dsPIC33EP16GS202_pic_heart_beat: ERROR! failed on Chain[0] after 3 times try!
This kind of error is very often caused by a dead hashboard, the S9SE and the S9k are terribly built, I had a 100% failure rate with them in no time, compared to S9, S9i, and S9j these gears are trash, so it's pretty normal to lose a hash board every now and then. With that said, just to make sure that the issue is indeed with this chain and not something else -- do the following: - Disconnect the other two working hash boards (unplug the power cables and ribbon/data cables) - Use 3 of the disconnected PSU cables on Chain 0 - Use 1 of the disconnected ribbon cables on Chain 0 - Turn the miner on with only Chain 0 onboard By doing this, you eliminate the majority of other issues that can cause this problem, if the hashboard still doesn't hash, then your last hope with be 1- Sdcard the miner back to an earlier firmware 2- Upgrade the miner to the latest firmware Keep in mind that by doing the second one, you won't be able to roll back to the old firmware unless you use SDcard again. If all of the above failed, you just have to disable the hahsboard by unplugging the hashboard's cables, keeping it plugged will slow the miner's boot.
|
|
|
|
|