[Donated $2k+ To Charity] Clean Water Coin: A Crypto Charity (Pure PoS)

[CleanWaterCoin]

STRESS FREE LAUNCH SETTINGS
Very Important You Read This Post

Failover settings for cgminer, bfgminer and sgminer

The default setup in all three mining programs is failover. This means that if you input a number of pools, it will try to use them as a priority list, moving away from the 1st to the 2nd, 2nd to 3rd and so on. If any of the earlier pools recover, it will move back to the higher priority ones.

So what you need to do is to register at a community pool and set that pool as your primary. Then register at our temporary pool and set that pool as your secondary. An example of how you should setup your .bat is below:

Code:

-o http://pool1:port -u pool1username.workername -p pool1workerpassword -o http://tempmining.cleanwatercoin.org:3333 -u pool2username.workername -p pool2password

Below is an example of how you setup your failover if you use a .conf file instead:

Code:

"pools" : [
	{
		"url" : "stratum+tcp://pool1:port",
		"user" : "pool1username.workername",
		"pass" : "pool1workerpassword"
	},
	{
		"url" : "stratum+tcp://tempmining.cleanwatercoin.org:3333",
		"user" : "pool2username.workername",
		"pass" : "pool2workerpassword"
	},
]

No matter what pool you have decided to mine at, whether its our official pool, the temp pool, or a community pool, we highly suggest you include a failover pool. This will prevent you from incurring extended down time if your main pool gets DDOS’d. It’s always better to be safe than sorry!

POOLS

Official Pool
http://pool.cleanwatercoin.org/

Official Pool
http://temp.cleanwatercoin.org/

Featured Community Pools
http://water.suchpool.pw/
http://water.hashing.at/
http://water.pool.mn/
http://cwc.mingopool.com/
http://water.mining-man.com/
http://water.prominer.org/

[1713958681]

1713958681

[kelvinliong]

Please listen to us!
X11 please!

We will be addressing this after launch. Promise

After launch?
It means that the coin may folk into X11 algo?

Yes, we are testing a couple of different options

However, we have all of our time and attention focused on the launch today, but we promise to respond to the X11 requests later this evening.

Love it if it is X11!
Just send 0.3BTC more to the PLC address 

[666#666]

yup , if changed to X11 ASAP, that's will be awsome.

[DigitalDrops]

yup , if changed to X11 ASAP, that's will be awsome.

Yes, we are testing some things on X11, and we will fill everyone in on the development progress after launch. Just gotta focus on the launch for now

p.s. I'll be away at church for the next couple of hours, but I'll be trying to monitor the discussion on my phone. If you need immediate contact with us, email me at support@cleanwatercoin.org

See ya'll soon!!

[session056]

This scheme can solve the fault very effective,good work.

[CleanWaterCoin]

STRESS FREE LAUNCH SETTINGS
Very Important You Read This Post

Failover settings for cgminer, bfgminer and sgminer

The default setup in all three mining programs is failover. This means that if you input a number of pools, it will try to use them as a priority list, moving away from the 1st to the 2nd, 2nd to 3rd and so on. If any of the earlier pools recover, it will move back to the higher priority ones.

So what you need to do is to register at a community pool and set that pool as your primary. Then register at our temporary pool and set that pool as your secondary. An example of how you should setup your .bat is below:

Code:

-o http://pool1:port -u pool1username.workername -p pool1workerpassword -o http://tempmining.cleanwatercoin.org:3333 -u pool2username.workername -p pool2password

Below is an example of how you setup your failover if you use a .conf file instead:

Code:

"pools" : [
	{
		"url" : "stratum+tcp://pool1:port",
		"user" : "pool1username.workername",
		"pass" : "pool1workerpassword"
	},
	{
		"url" : "stratum+tcp://tempmining.cleanwatercoin.org:3333",
		"user" : "pool2username.workername",
		"pass" : "pool2workerpassword"
	},
]

No matter what pool you have decided to mine at, whether its our official pool, the temp pool, or a community pool, we highly suggest you include a failover pool. This will prevent you from incurring extended down time if your main pool gets DDOS’d. It’s always better to be safe than sorry!

POOLS

Official Pool
http://pool.cleanwatercoin.org/

Official Pool
http://temp.cleanwatercoin.org/

Featured Community Pools
http://water.suchpool.pw/
http://water.hashing.at/
http://water.pool.mn/
http://cwc.mingopool.com/
http://water.mining-man.com/
http://water.prominer.org/

[CryptoLaunch]

         


Visit Cryptolaunch.net for all the latest coin launches!

• Forums
• Chat
• Countdowns
• Timers
• Bounties
• Mobile Friendly

[666#666]

awesome ! we have 8 pools for launch!

[Xardas2014]

awesome ! we have 8 pools for launch!

I've signed up with all of them and did my conf., so if the dev wants to spread the hashrate he can from his end

[CleanWaterCoin]

awesome ! we have 8 pools for launch!

I've signed up with all of them and did my conf., so if the dev wants to spread the hashrate he can from his end

Perfect, people should follow your example. Sign up for the official or temp pool then sign up at any number of community pools. Set your failover in your .bat or .conf like I posted above and then theres no need to worry.

[AJMiles]

this needs more attention

Common ppl, help the devs out!

[YouIsPeng]

Does anyone have the wallet yet?

Devs promised a password-protected download would be available before launch day?

[CleanWaterCoin]

Does anyone have the wallet yet?

Devs promised a password-protected download would be available before launch day?

We will release password protected wallets ASAP. We are doing some quality checks on the final compiled versions.

[CleanWaterCoin]

I've updated the Pre-Launch Coin Investor totals and added % share and total coins for that share. Also, I've sent out emails to all the new comers. You can view totals and details on the spreadsheet linked below. BTC total as of this post is 7.5 so there are lots of coins up for grabs still! The PLC will close at launch, so there is approximately only 3.5 hours left to get Pre-Launch Coins.

PLC Details and Totals

Click the above link to view shares of the Pre-Launch Coins. If you've sent BTC and don't see your PLC ID number listed, or you haven't recieved a PLC ID number, please send us a PM and we will help you out!

[Lyngtoft]

+1 for X11

[MineP.it]

MineP.it WATER Pool

Register now, if you haven't already done so, and prepare your workers be ready for launch.

Stratum connection example:
cgminer --scrypt -o stratum+tcp://water.minep.it:3349 -u MinepitUsername.anything -p anything

MinePit Pools

• One registration to access all our pools
• Auto payouts every minute
• Super fast, powerful, scale-able servers
• Unbeatable DDOS protection
• Unique, custom interface and back-end infrastructure
• Super fast compile times - we aim to be one of the first pools running at every launch

Register Now!

 

[Xardas2014]

MinePit Pools

• One registration to access all our pools
• Auto payouts every minute
• Super fast, powerful, scale-able servers
• Unbeatable DDOS protection
• Unique, custom interface and back-end infrastructure
• Super fast compile times - we aim to be one of the first pools running at every launch

Register Now!

 

One registration to access all our pools<-----------------I'm truly dumbfounded why all pools don't do this.

[CleanWaterCoin]

STRESS FREE LAUNCH SETTINGS
Very Important You Read This Post

Failover settings for cgminer, bfgminer and sgminer

The default setup in all three mining programs is failover. This means that if you input a number of pools, it will try to use them as a priority list, moving away from the 1st to the 2nd, 2nd to 3rd and so on. If any of the earlier pools recover, it will move back to the higher priority ones.

So what you need to do is to register at a community pool and set that pool as your primary. Then register at our temporary pool and set that pool as your secondary. An example of how you should setup your .bat is below:

Code:

-o http://pool1:port -u pool1username.workername -p pool1workerpassword -o http://tempmining.cleanwatercoin.org:3333 -u pool2username.workername -p pool2password

Below is an example of how you setup your failover if you use a .conf file instead:

Code:

"pools" : [
	{
		"url" : "stratum+tcp://pool1:port",
		"user" : "pool1username.workername",
		"pass" : "pool1workerpassword"
	},
	{
		"url" : "stratum+tcp://tempmining.cleanwatercoin.org:3333",
		"user" : "pool2username.workername",
		"pass" : "pool2workerpassword"
	},
]

No matter what pool you have decided to mine at, whether its our official pool, the temp pool, or a community pool, we highly suggest you include a failover pool. This will prevent you from incurring extended down time if your main pool gets DDOS’d. It’s always better to be safe than sorry!

POOLS

Official Pool
http://pool.cleanwatercoin.org/

Official Pool
http://temp.cleanwatercoin.org/

Featured Community Pools
http://water.suchpool.pw/
http://water.hashing.at/
http://water.pool.mn/
http://cwc.mingopool.com/
http://water.mining-man.com/
http://water.prominer.org/
https://www.minep.it/pool/water/

[bitbulvar]

Just invested! This coin looks amazing 

[PoolMingo]

Reward System: Full Stratum/Vardiff system with PROP
Server Location: Europe
Pro Hardware: 10 Gb fiber optic connection
Storage: Fast ZFS based environment with SSD cache and 32 disks.
CPU: Xeon 64bit / 32 CPU cores
Ram: 128 GB RAM.
Fee: 0%

You can register now for the launch of Clean Water Coin. We we're mining at 5 minutes past launch!

Join us, give us your hashes! it will be worth!

---> MINGOPOOL <---