djc200
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 23, 2022, 12:30:51 AM |
|
I'm also in the same boat here with an S19a Pro. Can anyone help me? Here's the current log: Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152 pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 209668K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19708K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090e410 (9242 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB) .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 6636K (cd47e000 - cdaf9000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154 Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: disable subpage write nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: NAND_ECC_HW nand: NAND_ECC_HW_SYNDROME mtd->writesize = 2048 ecc->strength = 1 ecc->size = 2048 mtd->writesize = 2048 chip->ecc_strength_ds = 4 chip->ecc_step_ds = 512 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad block at 0x000002420000 nand_read_bbt: bad block at 0x000002440000 nand_read_bbt: bad block at 0x000002460000 8 ofpart partitions found on MTD device pl35x-nand Creating 8 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000005200000 : "sig" 0x000005200000-0x000006000000 : "reserve1" 0x000006000000-0x000007000000 : "upgrade-ramfs" 0x000007000000-0x00000a800000 : "upgrade-file" 0x00000a800000-0x000010000000 : "reserve2" nf_conntrack version 0.5.0 (3635 buckets, 14540 max) ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro devpts: called with bogus options ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1887179327 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4 ubi0: background thread "ubi_bgt0d" started, PID 729 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D552F020-5F5C-4570-92AB-8DAAEA8A1D39, small LPT model ubi2: attaching mtd4 ubi2: scanning is finished ubi2: attached mtd4 (name "reserve1", size 14 MiB) ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0 ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi2: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 3755559332 ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4 ubi2: background thread "ubi_bgt2d" started, PID 740 UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744 UBIFS (ubi2:0): recovery needed UBIFS (ubi2:0): recovery completed UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc" UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB) UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 4797DD4F-AE0D-410E-8EFF-1E91649A3869, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready random: avahi-daemon urandom read with 2 bits of entropy available macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfbc8000 *base_vir_addr = 0xb031 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized
===========================================Miner log=========================================== 1970-01-01 00:00:09 Miner compile time: Sat Jul 24 14:04:45 CST 2021 type: Antminer S19a 1970-01-01 00:00:10 This is fix-freq version 1970-01-01 00:00:10 Miner compile time: Sat Jul 24 14:04:45 CST 2021 type: Antminer S19a 1970-01-01 00:00:10 commit version: db12feb 2021-05-12 15:03:10, build by: jenkins 2021-07-24 14:16:14 1970-01-01 00:00:10 opt_multi_version = 1 1970-01-01 00:00:10 opt_bitmain_ab = 1 1970-01-01 00:00:10 mid_auto_gen = 0 1970-01-01 00:00:10 opt_bitmain_work_mode = 0 1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000 1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7 1970-01-01 00:00:10 Note: front fan is power on! 1970-01-01 00:00:10 Note: rear fan is power on! 1970-01-01 00:00:10 start the http log. 1970-01-01 00:00:10 httpListenThread start ret=0 1970-01-01 00:00:10 start listen on 6060 ... 1970-01-01 00:00:10 load machine BHB28611 conf 1970-01-01 00:00:10 machine : BHB28611 1970-01-01 00:00:10 chain_num 4, chain_domain_num 9, chain_asic_num 72, domain_asic_num 8 1970-01-01 00:00:10 asic 23, wind 0, y 8 1970-01-01 00:00:10 air in 1970-01-01 00:00:10 asic 56, wind 0, y 8 1970-01-01 00:00:10 air in 1970-01-01 00:00:10 asic 16, wind 0, y 1 1970-01-01 00:00:10 air out 1970-01-01 00:00:10 asic 63, wind 0, y 1 1970-01-01 00:00:10 air out 2022-01-22 23:18:55 miner ID : 800a34093efaa85c 2022-01-22 23:18:55 FPGA Version = 0xB031 2022-01-22 23:18:55 HASH_ON_PLUG V9 = 0x7 2022-01-22 23:18:55 ==========================capability start========================== 2022-01-22 23:18:55 board num = 3 2022-01-22 23:18:55 board id = 0, chain num = 1 2022-01-22 23:18:55 chain id = 0 2022-01-22 23:18:55 board id = 1, chain num = 1 2022-01-22 23:18:55 chain id = 1 2022-01-22 23:18:55 board id = 2, chain num = 1 2022-01-22 23:18:55 chain id = 2 2022-01-22 23:18:55 ==========================capability end============================ 2022-01-22 23:18:55 chain num = 3 2022-01-22 23:18:57 [chain 0] 2022-01-22 23:18:57 0x0000 11 52 D6 72 E5 D2 47 14 06 B0 D4 58 B1 46 4A 05 2022-01-22 23:18:57 0x0010 2E 66 92 81 36 39 93 62 86 9F 2B 49 C2 25 26 39 2022-01-22 23:18:57 0x0020 E1 C3 BA C4 A2 CC B8 EF C1 AE 44 49 28 2C C6 49 2022-01-22 23:18:57 0x0030 D0 0B 1C 1B D9 A8 93 22 E7 19 C9 7C 93 39 8B 4D 2022-01-22 23:18:57 0x0040 66 8F 0D 18 0C D6 A3 AB C5 2E 6A B7 32 5A E1 B8 2022-01-22 23:18:57 0x0050 E9 C9 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:57 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2022-01-22 23:18:57 2022-01-22 23:18:59 [chain 1] 2022-01-22 23:18:59 0x0000 11 52 B5 5E 53 11 DA 16 7A 66 B6 2B 41 A6 F9 C3 2022-01-22 23:18:59 0x0010 21 4F 7F FA 5A 40 82 61 03 52 01 CC A7 34 98 9E 2022-01-22 23:18:59 0x0020 8F B6 9C EE ED 92 B5 7D F7 06 FE F1 8D 29 88 6A 2022-01-22 23:18:59 0x0030 51 10 FA C8 D2 49 62 08 F6 C8 F1 C7 BA D3 A3 85 2022-01-22 23:18:59 0x0040 5E 2F 03 2F CF 51 66 E0 C2 CD C3 7E 67 2F 52 4C 2022-01-22 23:18:59 0x0050 B7 2D FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:18:59 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2022-01-22 23:18:59 2022-01-22 23:19:00 [chain 2] 2022-01-22 23:19:00 0x0000 11 52 9A 85 DA 15 CC E1 0F E9 3B F4 9D BB AA C2 2022-01-22 23:19:00 0x0010 EF F3 00 CC 37 47 E5 8B 9F 6C 6F 48 45 58 BB D5 2022-01-22 23:19:00 0x0020 8C 43 99 6E DB D8 58 9C 19 95 C5 02 5A 86 FC 4E 2022-01-22 23:19:00 0x0030 DD 3C A4 B6 ED 3F 1C 8F A4 17 6E DB CF C6 7E A1 2022-01-22 23:19:00 0x0040 80 3E A9 B7 F0 CF 7D 30 78 68 01 56 34 B2 48 E4 2022-01-22 23:19:00 0x0050 7E B6 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2022-01-22 23:19:00 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2022-01-22 23:19:00 2022-01-22 23:19:00 fan_eft : 0 fan_pwm : 100 2022-01-22 23:19:00 create thread 2022-01-22 23:19:00 fixed working voltage = -1 2022-01-22 23:19:00 Chain [0] PCB Version: 0x0100 2022-01-22 23:19:00 Chain [0] BOM Version: 0x0100 2022-01-22 23:19:00 Chain [1] PCB Version: 0x0100 2022-01-22 23:19:00 Chain [1] BOM Version: 0x0100 2022-01-22 23:19:00 Chain [2] PCB Version: 0x0100 2022-01-22 23:19:00 Chain [2] BOM Version: 0x0100 2022-01-22 23:19:04 Fan check passed. 2022-01-22 23:19:05 chain[0] PIC jump to app 2022-01-22 23:19:07 Check chain[0] PIC fw version=0xfe 2022-01-22 23:19:08 chain[1] PIC jump to app 2022-01-22 23:19:09 Check chain[1] PIC fw version=0xfe 2022-01-22 23:19:11 chain[2] PIC jump to app 2022-01-22 23:19:12 Check chain[2] PIC fw version=0xfe 2022-01-22 23:19:12 create thread 2022-01-22 23:19:12 max sensor num = 4 2022-01-22 23:19:12 temperature_monitor_thread start... 2022-01-22 23:19:17 power type version: 0x0071 2022-01-22 23:19:17 Enter sleep to make sure power release finish. 2022-01-22 23:19:48 Slept 30 seconds, diff = 0. 2022-01-22 23:19:48 set_voltage_by_steps to 1500. 2022-01-22 23:19:53 start up min temp by 75a = 255 2022-01-22 23:19:53 set UART baud to 115200 2022-01-22 23:19:55 chain avg vol rise to 15.12 2022-01-22 23:20:01 Chain[0]: find 100 asic, times 0 2022-01-22 23:20:09 Chain[0]: find 100 asic, times 1 2022-01-22 23:20:17 Chain[0]: find 100 asic, times 2 2022-01-22 23:20:17 Chain 0 only find 100 asic, will power off hash board 0 2022-01-22 23:20:19 chain avg vol rise to 22.70 2022-01-22 23:20:25 Chain[1]: find 100 asic, times 0 2022-01-22 23:20:31 chain avg vol drop to 15.11 2022-01-22 23:20:33 Chain[1]: find 100 asic, times 1 2022-01-22 23:20:41 Chain[1]: find 100 asic, times 2 2022-01-22 23:20:41 Chain 1 only find 100 asic, will power off hash board 1 2022-01-22 23:20:43 chain avg vol rise to 30.27 2022-01-22 23:20:49 Chain[2]: find 100 asic, times 0 2022-01-22 23:20:54 chain avg vol drop to 15.09 2022-01-22 23:20:57 Chain[2]: find 100 asic, times 1 2022-01-22 23:21:05 Chain[2]: find 100 asic, times 2 2022-01-22 23:21:06 Chain 2 only find 100 asic, will power off hash board 2 2022-01-22 23:21:06 ERROR_SOC_INIT: soc init failed! 2022-01-22 23:21:06 stop_mining: soc init failed! 2022-01-22 23:21:06 uninit_temp_info 2022-01-22 23:21:06 do not read temp anymore... 2022-01-22 23:21:06 cancel thread 2022-01-22 23:21:06 cancel thread 2022-01-22 23:21:06 ****power off hashboard**** 2022-01-22 23:21:06 temp monitor thread exit 2022-01-22 23:21:07 STATUS_OKAY 2022-01-22 23:21:07 set_start_time_point total_tv_start_sys=149 total_tv_end_sys=150 2022-01-22 23:21:08 start to init... 2022-01-22 23:21:08 Version num 8 2022-01-22 23:21:08 Mask num 0xe000 2022-01-22 23:21:08 Note: addrInterval or corenum is not initialized. 2022-01-22 23:28:02 reload pool, need recalculate 2022-01-22 23:28:02 set_start_time_point total_tv_start_sys=564 total_tv_end_sys=565 Boss, I'm in the same situation with 2 x S19a brand new units and extreme noob here 🙋♂️, do you have any good info on PIC? Are you referring the firmware? Any info is greatly appreciated!
|