ShibeMaster
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 07, 2021, 08:59:15 PM |
|
Apologies to everyone. Been on vacation for several days during the holy week season. Testbug= yes already sent you a pm sdnz= yes old wallet version 1 is still connected to the hardcoded node.
Will be killing the node for the old version 1 wallet, so miners using old version 1 wallet won't be able to connect to the old node anymore. wallet 1.0.2 connects to these nodes
addnode=136.144.171.201:30268 addnode= 158.101.29.12:30268 addnode=95.11.228.167:30268
initially but then gets disconnected after a few minutes. Still trouble shooting, might have to into the source code and delete the hard coded nodes. As for exchanges, Graviex would be happy to list BTC3 for a 0.1BTC listing fee. Still evaluating if this amount would justify for the listing or just crowdsource/crowfund the listing fee just to get it on the exchange. Feel free to weigh in everyone. Block explorer page is on hold at the moment until we get the new wallet back online.
Thanks everyone for your continued patience BTC3
I'm connected to those nodes but wallet is still behind. Gonna be honest it's a little late to be giving this info out, most people have already given up on the coin, but maybe you can rekindle some interest by fixing the bugs and getting a pool online.
|
|
|
|
SonOfSatosh1 (OP)
Jr. Member
Offline
Activity: 84
Merit: 1
|
|
April 08, 2021, 05:06:17 AM |
|
Sadly i am still not able to connect to the blockchain. I can offer the following: Dev can upload his blockchain (blocks, chainstate,...) as zip file to the Bitcoin3 website. After that i can download it and let the pool act as a node. The pool will most likely be there for a while so this would help to get all new people a working connection to the network. I can not allow unlimited nodes to connect to the pool, but there can be more than 15 connections at once. So the other nodes can sync and if someone is hosting a Bitcoin3 node in a datacentre, he could also allow in and outgoing traffic on the Bitcoin3 p2p port (not the RPC port, this port should ALWAYS be closed). The main error for not being connected is, as far as i can say, this error on the debug.log: ERROR: AcceptBlockHeader: Consensus::ContextualCheckBlockHeader: 000000000000004130bdf143da15ee11d6d2f44e9c5d0b7f5624eb10c63b607c, bad-diffbits, incorrect proof of work (code 16)
Blockchain and chainstate have been uploaded to btc3 website. Hope we can have the pool act as a node for people to connect. Thanks
|
|
|
|
chry78
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 08, 2021, 06:33:31 AM |
|
perfetto questa mattina mi sono stati cancellati tremila btc3 maturati dopo che sono giorni che ho lasciato il computer accesso,poca serieta nei miei confronti? Duecentoquaranta ore di corrente buttati
|
|
|
|
testbug
|
|
April 08, 2021, 09:52:23 AM |
|
Sadly i am still not able to connect to the blockchain. I can offer the following: Dev can upload his blockchain (blocks, chainstate,...) as zip file to the Bitcoin3 website. After that i can download it and let the pool act as a node. The pool will most likely be there for a while so this would help to get all new people a working connection to the network. I can not allow unlimited nodes to connect to the pool, but there can be more than 15 connections at once. So the other nodes can sync and if someone is hosting a Bitcoin3 node in a datacentre, he could also allow in and outgoing traffic on the Bitcoin3 p2p port (not the RPC port, this port should ALWAYS be closed). The main error for not being connected is, as far as i can say, this error on the debug.log: ERROR: AcceptBlockHeader: Consensus::ContextualCheckBlockHeader: 000000000000004130bdf143da15ee11d6d2f44e9c5d0b7f5624eb10c63b607c, bad-diffbits, incorrect proof of work (code 16)
Blockchain and chainstate have been uploaded to btc3 website. Hope we can have the pool act as a node for people to connect. Thanks Is this the right chain? "blocks": 6298
|
|
|
|
sdnz
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 08, 2021, 09:59:22 AM |
|
Sadly i am still not able to connect to the blockchain. I can offer the following: Dev can upload his blockchain (blocks, chainstate,...) as zip file to the Bitcoin3 website. After that i can download it and let the pool act as a node. The pool will most likely be there for a while so this would help to get all new people a working connection to the network. I can not allow unlimited nodes to connect to the pool, but there can be more than 15 connections at once. So the other nodes can sync and if someone is hosting a Bitcoin3 node in a datacentre, he could also allow in and outgoing traffic on the Bitcoin3 p2p port (not the RPC port, this port should ALWAYS be closed). The main error for not being connected is, as far as i can say, this error on the debug.log: ERROR: AcceptBlockHeader: Consensus::ContextualCheckBlockHeader: 000000000000004130bdf143da15ee11d6d2f44e9c5d0b7f5624eb10c63b607c, bad-diffbits, incorrect proof of work (code 16)
Blockchain and chainstate have been uploaded to btc3 website. Hope we can have the pool act as a node for people to connect. Thanks Is this the right chain? "blocks": 6298 My node at 158.101.29.12 seems also running correctly now. Connected peers: '37.161.27.94:24517' '/Satoshi:1.0.2/' headers=6305/6307/6307" '194.50.15.119:2963' '/Satoshi:1.0.2/' headers=6305/6307/6307" '203.211.106.86:30904' '/Satoshi:1.0.2/' headers=6298/-1/-1" '46.138.178.248:36806' '/Satoshi:1.0.2/' headers=6306/6307/6307" '212.171.130.83:62569' '/Satoshi:1.0.2/' headers=6298/-1/-1"
|
|
|
|
testbug
|
|
April 08, 2021, 10:10:34 AM Last edit: April 08, 2021, 10:26:00 AM by testbug |
|
Sadly i am still not able to connect to the blockchain. I can offer the following: Dev can upload his blockchain (blocks, chainstate,...) as zip file to the Bitcoin3 website. After that i can download it and let the pool act as a node. The pool will most likely be there for a while so this would help to get all new people a working connection to the network. I can not allow unlimited nodes to connect to the pool, but there can be more than 15 connections at once. So the other nodes can sync and if someone is hosting a Bitcoin3 node in a datacentre, he could also allow in and outgoing traffic on the Bitcoin3 p2p port (not the RPC port, this port should ALWAYS be closed). The main error for not being connected is, as far as i can say, this error on the debug.log: ERROR: AcceptBlockHeader: Consensus::ContextualCheckBlockHeader: 000000000000004130bdf143da15ee11d6d2f44e9c5d0b7f5624eb10c63b607c, bad-diffbits, incorrect proof of work (code 16)
Blockchain and chainstate have been uploaded to btc3 website. Hope we can have the pool act as a node for people to connect. Thanks Is this the right chain? "blocks": 6298 My node at 158.101.29.12 seems also running correctly now. Connected peers: '37.161.27.94:24517' '/Satoshi:1.0.2/' headers=6305/6307/6307" '194.50.15.119:2963' '/Satoshi:1.0.2/' headers=6305/6307/6307" '203.211.106.86:30904' '/Satoshi:1.0.2/' headers=6298/-1/-1" '46.138.178.248:36806' '/Satoshi:1.0.2/' headers=6306/6307/6307" '212.171.130.83:62569' '/Satoshi:1.0.2/' headers=6298/-1/-1" just to confirm: Block 6 308 ? Currently three connections on the pool, node is configured to allow inbound transaction, meaning new people can connect to the pools node and sync the blockchain. cryptohamstr.com
|
|
|
|
sdnz
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 08, 2021, 10:26:04 AM |
|
Sadly i am still not able to connect to the blockchain. I can offer the following: Dev can upload his blockchain (blocks, chainstate,...) as zip file to the Bitcoin3 website. After that i can download it and let the pool act as a node. The pool will most likely be there for a while so this would help to get all new people a working connection to the network. I can not allow unlimited nodes to connect to the pool, but there can be more than 15 connections at once. So the other nodes can sync and if someone is hosting a Bitcoin3 node in a datacentre, he could also allow in and outgoing traffic on the Bitcoin3 p2p port (not the RPC port, this port should ALWAYS be closed). The main error for not being connected is, as far as i can say, this error on the debug.log: ERROR: AcceptBlockHeader: Consensus::ContextualCheckBlockHeader: 000000000000004130bdf143da15ee11d6d2f44e9c5d0b7f5624eb10c63b607c, bad-diffbits, incorrect proof of work (code 16)
Blockchain and chainstate have been uploaded to btc3 website. Hope we can have the pool act as a node for people to connect. Thanks Is this the right chain? "blocks": 6298 My node at 158.101.29.12 seems also running correctly now. Connected peers: '37.161.27.94:24517' '/Satoshi:1.0.2/' headers=6305/6307/6307" '194.50.15.119:2963' '/Satoshi:1.0.2/' headers=6305/6307/6307" '203.211.106.86:30904' '/Satoshi:1.0.2/' headers=6298/-1/-1" '46.138.178.248:36806' '/Satoshi:1.0.2/' headers=6306/6307/6307" '212.171.130.83:62569' '/Satoshi:1.0.2/' headers=6298/-1/-1" just to confirm: Block 6 308 ? Currently three connections on the pool, node is configured to allow inbound transaction, meaning new people can connect to the pools node and sync the blockchain. It seems the chain is moving now. I have 6 connections on my node and all nodes are from v1.0.2: Connected peers: "0: '212.171.130.83:62990' '/Satoshi:1.0.2/' headers=6313/6313/6313" "1: '161.97.187.181:49844' '/Satoshi:1.0.2/' headers=6313/6313/6313" "2: '194.50.15.119:2972' '/Satoshi:1.0.2/' headers=6313/6313/6313" "3: '37.161.27.94:24514' '/Satoshi:1.0.2/' headers=6313/6313/6313" "5: '203.211.106.86:22822' '/Satoshi:1.0.2/' headers=6313/6313/6313" "7: '46.138.178.248:36612' '/Satoshi:1.0.2/' headers=6313/6313/6313"
|
|
|
|
testbug
|
|
April 08, 2021, 10:29:29 AM |
|
Sadly i am still not able to connect to the blockchain. I can offer the following: Dev can upload his blockchain (blocks, chainstate,...) as zip file to the Bitcoin3 website. After that i can download it and let the pool act as a node. The pool will most likely be there for a while so this would help to get all new people a working connection to the network. I can not allow unlimited nodes to connect to the pool, but there can be more than 15 connections at once. So the other nodes can sync and if someone is hosting a Bitcoin3 node in a datacentre, he could also allow in and outgoing traffic on the Bitcoin3 p2p port (not the RPC port, this port should ALWAYS be closed). The main error for not being connected is, as far as i can say, this error on the debug.log: ERROR: AcceptBlockHeader: Consensus::ContextualCheckBlockHeader: 000000000000004130bdf143da15ee11d6d2f44e9c5d0b7f5624eb10c63b607c, bad-diffbits, incorrect proof of work (code 16)
Blockchain and chainstate have been uploaded to btc3 website. Hope we can have the pool act as a node for people to connect. Thanks Is this the right chain? "blocks": 6298 My node at 158.101.29.12 seems also running correctly now. Connected peers: '37.161.27.94:24517' '/Satoshi:1.0.2/' headers=6305/6307/6307" '194.50.15.119:2963' '/Satoshi:1.0.2/' headers=6305/6307/6307" '203.211.106.86:30904' '/Satoshi:1.0.2/' headers=6298/-1/-1" '46.138.178.248:36806' '/Satoshi:1.0.2/' headers=6306/6307/6307" '212.171.130.83:62569' '/Satoshi:1.0.2/' headers=6298/-1/-1" just to confirm: Block 6 308 ? Currently three connections on the pool, node is configured to allow inbound transaction, meaning new people can connect to the pools node and sync the blockchain. It seems the chain is moving now. I have 6 connections on my node and all nodes are from v1.0.2: Connected peers: "0: '212.171.130.83:62990' '/Satoshi:1.0.2/' headers=6313/6313/6313" "1: '161.97.187.181:49844' '/Satoshi:1.0.2/' headers=6313/6313/6313" "2: '194.50.15.119:2972' '/Satoshi:1.0.2/' headers=6313/6313/6313" "3: '37.161.27.94:24514' '/Satoshi:1.0.2/' headers=6313/6313/6313" "5: '203.211.106.86:22822' '/Satoshi:1.0.2/' headers=6313/6313/6313" "7: '46.138.178.248:36612' '/Satoshi:1.0.2/' headers=6313/6313/6313" cryptohamstr.com has 4 connections so far and blockchain is moving forward.
|
|
|
|
chainganginc
Newbie
Offline
Activity: 298
Merit: 0
|
|
April 08, 2021, 10:42:03 AM |
|
Man that sucks I was looking forward to this. Anyone else know of new and promising altcoins?
There is Piece Classic and Piece I had to restart my chain but it will be something. I will keep a I out for this one. Pieceofpi.world but no node or blockexplorer yet
|
|
|
|
Den11
Newbie
Offline
Activity: 78
Merit: 0
|
|
April 08, 2021, 11:01:30 AM Last edit: April 08, 2021, 01:39:06 PM by Den11 |
|
addnode=158.101.29.12:30268 addnode=194.50.15.119:3009 addnode=203.211.106.86:31426 addnode=37.161.27.94:24513 wallet 1.0.2 shows 0 connections! What to do?
|
|
|
|
testbug
|
|
April 08, 2021, 04:00:34 PM |
|
addnode=158.101.29.12:30268 addnode=194.50.15.119:3009 addnode=203.211.106.86:31426 addnode=37.161.27.94:24513 wallet 1.0.2 shows 0 connections! What to do?
If it is not syncing try: connect= instead of addnode= on your bitcoin3.conf With connect your node will only connect to the nodes you entered. As soon as you are synced you can change "connect=" again to "addnode=" in order to let your node connect to other nodes. The blockchain is very tiny right now, so it should sync within a few minutes. Hashrate is already increasing.
|
|
|
|
Den11
Newbie
Offline
Activity: 78
Merit: 0
|
|
April 08, 2021, 04:36:52 PM |
|
addnode=158.101.29.12:30268 addnode=194.50.15.119:3009 addnode=203.211.106.86:31426 addnode=37.161.27.94:24513 wallet 1.0.2 shows 0 connections! What to do?
If it is not syncing try: connect= instead of addnode= on your bitcoin3.conf With connect your node will only connect to the nodes you entered. As soon as you are synced you can change "connect=" again to "addnode=" in order to let your node connect to other nodes. The blockchain is very tiny right now, so it should sync within a few minutes. Hashrate is already increasing. connect= it did not help, 0 connections
|
|
|
|
testbug
|
|
April 08, 2021, 04:38:04 PM |
|
addnode=158.101.29.12:30268 addnode=194.50.15.119:3009 addnode=203.211.106.86:31426 addnode=37.161.27.94:24513 wallet 1.0.2 shows 0 connections! What to do?
If it is not syncing try: connect= instead of addnode= on your bitcoin3.conf With connect your node will only connect to the nodes you entered. As soon as you are synced you can change "connect=" again to "addnode=" in order to let your node connect to other nodes. The blockchain is very tiny right now, so it should sync within a few minutes. Hashrate is already increasing. connect= it did not help, 0 connections Did you allready try to delete everything except for your wallet.dat? If your wallet is already synced to a wrong chain it might never get synced. What does a "-getinfo" put for block number?
|
|
|
|
chry78
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 08, 2021, 04:45:49 PM |
|
ha minato 6000 blocchi in solitaria, cancellato i nostri,e difficolta paurosa,minimo un rimborso per chi puo dimostrare di aver lavorato con il computer dal 15 marzo a oggi
|
|
|
|
Den11
Newbie
Offline
Activity: 78
Merit: 0
|
|
April 08, 2021, 04:58:12 PM Last edit: April 08, 2021, 05:35:37 PM by Den11 |
|
Dev download the working bitcoin3.conf 0 blocks and 0 connections, 6 weeks behind. wallet 1.0.2
|
|
|
|
sdnz
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 08, 2021, 08:20:58 PM |
|
Dev download the working bitcoin3.conf 0 blocks and 0 connections, 6 weeks behind. wallet 1.0.2
You need to make sure all directories/files to be removed except wallets from bitcoin3 directory. And add the available seed nodes and start bitcoin3-qt. For example my bitcoin3.conf is as following for your reference. addresstype=legacy
server=1 daemon=1 #gen=1 #genproclimit=-1 rpcbind=0.0.0.0 rpcuser=username-here rpcpassword=pass-here rpcallowip=127.0.0.1 listen=1 rest=1
onlynet=ipv4
dbcache=30
addnode=161.97.187.181 addnode=158.101.29.12
If nothing happens for several minutes after restarting bitcoin3-qt, then goto Help/Debug window/Information window, and click "Open" under "Debug log file" and show the last part of the output will be helpful to identify the problem.
|
|
|
|
Walker-D-Plank
Newbie
Offline
Activity: 83
Merit: 0
|
|
April 08, 2021, 08:27:37 PM |
|
I just loaded wallet to see if it would start and it went to block 6405
|
|
|
|
Den11
Newbie
Offline
Activity: 78
Merit: 0
|
|
April 09, 2021, 03:52:32 AM |
|
Dev download the working bitcoin3.conf 0 blocks and 0 connections, 6 weeks behind. wallet 1.0.2
You need to make sure all directories/files to be removed except wallets from bitcoin3 directory. And add the available seed nodes and start bitcoin3-qt. For example my bitcoin3.conf is as following for your reference. addresstype=legacy
server=1 daemon=1 #gen=1 #genproclimit=-1 rpcbind=0.0.0.0 rpcuser=username-here rpcpassword=pass-here rpcallowip=127.0.0.1 listen=1 rest=1
onlynet=ipv4
dbcache=30
addnode=161.97.187.181 addnode=158.101.29.12
If nothing happens for several minutes after restarting bitcoin3-qt, then goto Help/Debug window/Information window, and click "Open" under "Debug log file" and show the last part of the output will be helpful to identify the problem. 2021-04-09T03: 51: 01Z Socket recovery error Remote forcibly terminated an existing connection. (10054)
|
|
|
|
sdnz
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 09, 2021, 04:08:39 AM |
|
2021-04-09T03: 51: 01Z Socket recovery error Remote forcibly terminated an existing connection. (10054)
You could be more supportive to get help ;-) I don't think there are many people can help with that just the last line from your debug output. Could you copy more lines from the debug output? And please make sure old blockchain info is removed before restarting. Sorry if you have done so but there was no mention in your question. I think the directory is like: C:\Users\YourUserName\Appdata\Roaming\Bitcoin3
|
|
|
|
sdnz
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 09, 2021, 04:19:43 AM Last edit: April 09, 2021, 04:53:43 AM by sdnz |
|
I found those nodes connecting to my node are in "banned" list automatically. I think it's because they are still in the wrong chain. If you are running a node from one of these, please run v1.0.2 and make sure to delete old chain info before restart. Also be careful not to delete your wallets. "address": "73.31.181.117/32", "address": "91.152.210.102/32", "address": "94.247.63.177/32", "address": "95.84.178.175/32", "address": "95.111.228.167/32", "address": "195.238.117.169/32", "address": "203.220.21.37/32", "address": "206.116.249.47/32",
I will keep cleaning banned list so they can connect to the network.
|
|
|
|
|