BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 13, 2021, 09:33:07 PM Last edit: March 20, 2021, 07:13:57 AM by BNbitcoin |
|
BNbitcoinTokenized bitcoin PoW mineable on the Binance Smart Chain. https://bnbitcoin.orgBNbitcoin is a BEP20 adaptation for the Binance Smart Chain of the original 0xbitcoin project on Ethereum. Some parameters also have been modified to make BNBTC closer to the original design by Satoshi Nakamoto. The reason why BNBTC is born: after the DeFi massive widespread on the Ethereum mainnet, gas fees for transactions have become too high. This has a relevant and heavy impact on all the projects, and particularly if considering mined-tokens: submitting solutions and claiming rewards have become too expensive. The alternative is offered by the Smart Chain: with its low gas fees, fastness and smart-contract execution capabilities, it is the most suitable environment to give rebirth to bitcoin through the tokenized minable asset BNBTC. BNBTC token features:
Binance Smart Chain network
Contract address: 0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb
Token symbol: BNBTC
Token decimals: 8
Total supply: 21'000'000 Start mining now (SOLO MINING!! no pools yet):You can use the mining sw already used for 0xbitcoin (i.e. MVis-tokenminer) , but with the following settings: Target contract address: 0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb RPC URL: https://bsc-dataseed.binance.orgYou have to use an address with some BNB on the Binance Smart Chain to pay the (small) gas fees. You can start with gasPrice=10 and gasLimit=100'000 and then go up to have more chances to take the rewards. Tested both with CPU (Intel/AMD) and GPU (NVIDIA, older and newer). Tested successfully also on other main Binance RPC URLs Have a nice mining!
|
|
|
|
|
|
|
The network tries to produce one block per 10 minutes. It does this by automatically adjusting how difficult it is to produce blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
wanganxiu
Jr. Member
Offline
Activity: 211
Merit: 2
|
|
March 13, 2021, 11:52:05 PM |
|
Detailed configuration of mining software? ? ? ?
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 12:42:28 AM |
|
For example, for a starting config for solo-mining, you can download the latest copy of MVis-tokenminer here. Unzip the miner, and edit the tokenminer.ini file to adapt it for the BNBTC token and the Binance Smart Chain in the following sections: Host=https://bsc-dataseed.binance.org RPCPort= [leave this field empty]MinerAcct= [0x... your miner account with some BNB balance]AcctPK= [private key of your miner account without 0x prefix]TokenContract=0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb GasPrice=10 [..or more according the mining competitors...]GasLimit=100000 [ore more...]You can set the other parameters according your hardware configuration (TempProvider, ThrottleTemp, ShutDown) Once you have set tokenminer.ini you can create (or modify if it already exists) a "start-mining.bat" file with: .\tokenminer.exe -G -S pause (this is valid for GPU-based mining, for CPU you have to replace -G with -C). Then you go, with a command prompt, in the miner folder and launch .\start-mining.bat I suggest to keep a bscscan.com window open on the contract and refresh it to check the alignment between your activity and the rest of the miners interacting with the contract. For further details about MVis-tokenminer you can visit their GitHub repo here. Thanks for your interest in the project! Hope this helps
|
|
|
|
wanganxiu
Jr. Member
Offline
Activity: 211
Merit: 2
|
|
March 14, 2021, 01:03:46 AM |
|
For example, for a starting config for solo-mining, you can download the latest copy of MVis-tokenminer here. Unzip the miner, and edit the tokenminer.ini file to adapt it for the BNBTC token and the Binance Smart Chain in the following sections: Host=https://bsc-dataseed.binance.org RPCPort= [leave this field empty]MinerAcct= [0x... your miner account with some BNB balance]AcctPK= [private key of your miner account without 0x prefix]TokenContract=0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb GasPrice=10 [..or more according the mining competitors...]GasLimit=100000 [ore more...]You can set the other parameters according your hardware configuration (TempProvider, ThrottleTemp, ShutDown) Once you have set tokenminer.ini you can create (or modify if it already exists) a "start-mining.bat" file with: .\tokenminer.exe -G -S pause (this is valid for GPU-based mining, for CPU you have to replace -G with -C). Then you go, with a command prompt, in the miner folder and launch .\start-mining.bat I suggest to keep a bscscan.com window open on the contract and refresh it to check the alignment between your activity and the rest of the miners interacting with the contract. For further details about MVis-tokenminer you can visit their GitHub repo here. Thanks for your interest in the project! Hope this helps C:\Users\Administrator\Desktop\uuu\tokenminer>.\tokenminer.exe -G -P --opencl-platform 0 MVis-tokenminer 2.2.0 ===================================================================== Forked from github.com/Genoil/cpp-ethereum Please consider a donation to mining-visualizer.eth (0xA804e933301AA2C919D3a9834082Cddda877C205) d14 09:01:18.699> No OpenCL platforms found d14 09:01:18.730> Switching to failover node d14 09:01:18.746> Switching to failover node d14 09:01:18.761> Switching to failover node d14 09:01:18.777> Switching to failover node d14 09:01:18.792> Switching to failover node d14 09:01:18.808> Switching to failover node d14 09:01:18.824> Switching to failover node d14 09:01:18.855> Switching to failover node d14 09:01:18.871> Switching to failover node d14 09:01:18.886> Switching to failover node d14 09:01:18.902> Switching to failover node d14 09:01:18.917> Switching to failover node d14 09:01:18.933> Switching to failover node d14 09:01:18.949> Switching to failover node d14 09:01:18.964> Switching to failover node d14 09:01:18.996> Switching to failover node d14 09:01:19.011> Switching to failover node d14 09:01:19.027> Switching to failover node d14 09:01:19.042> Switching to failover node d14 09:01:19.058> Switching to failover node d14 09:01:19.074> Switching to failover node d14 09:01:19.089> Switching to failover node d14 09:01:19.105> Switching to failover node d14 09:01:19.136> Switching to failover node
|
|
|
|
wanganxiu
Jr. Member
Offline
Activity: 211
Merit: 2
|
|
March 14, 2021, 03:02:20 AM |
|
Need a private key, be careful that the coin is stolen and cannot be mined
|
|
|
|
MCcryptonia
Member
Offline
Activity: 155
Merit: 10
|
|
March 14, 2021, 06:14:57 AM |
|
Binance smart chain already fixed the issue with high gas fee already, now you running a new project on BSC itself and claiming that you want to fix high gas fee issue? This is a complete waste of time
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 08:10:08 AM |
|
Need a private key, be careful that the coin is stolen and cannot be mined
Sorry, but maybe you badly interpreted how the contract works. You do not give your private key to anyone: it is needed to submit solutions of the challenge to the contract to claim the reward. Check also 0xbitcoin: it exists from 3 years on now and nobody has never stolen a single satoshi... Please, be careful prior to shoot wrong statements...
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 08:32:09 AM |
|
For example, for a starting config for solo-mining, you can download the latest copy of MVis-tokenminer here. Unzip the miner, and edit the tokenminer.ini file to adapt it for the BNBTC token and the Binance Smart Chain in the following sections: Host=https://bsc-dataseed.binance.org RPCPort= [leave this field empty]MinerAcct= [0x... your miner account with some BNB balance]AcctPK= [private key of your miner account without 0x prefix]TokenContract=0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb GasPrice=10 [..or more according the mining competitors...]GasLimit=100000 [ore more...]You can set the other parameters according your hardware configuration (TempProvider, ThrottleTemp, ShutDown) Once you have set tokenminer.ini you can create (or modify if it already exists) a "start-mining.bat" file with: .\tokenminer.exe -G -S pause (this is valid for GPU-based mining, for CPU you have to replace -G with -C). Then you go, with a command prompt, in the miner folder and launch .\start-mining.bat I suggest to keep a bscscan.com window open on the contract and refresh it to check the alignment between your activity and the rest of the miners interacting with the contract. For further details about MVis-tokenminer you can visit their GitHub repo here. Thanks for your interest in the project! Hope this helps C:\Users\Administrator\Desktop\uuu\tokenminer>.\tokenminer.exe -G -P --opencl-platform 0 MVis-tokenminer 2.2.0 ===================================================================== Forked from github.com/Genoil/cpp-ethereum Please consider a donation to mining-visualizer.eth (0xA804e933301AA2C919D3a9834082Cddda877C205) d14 09:01:18.699> No OpenCL platforms found d14 09:01:18.730> Switching to failover node d14 09:01:18.746> Switching to failover node d14 09:01:18.761> Switching to failover node d14 09:01:18.777> Switching to failover node d14 09:01:18.792> Switching to failover node d14 09:01:18.808> Switching to failover node d14 09:01:18.824> Switching to failover node d14 09:01:18.855> Switching to failover node d14 09:01:18.871> Switching to failover node d14 09:01:18.886> Switching to failover node d14 09:01:18.902> Switching to failover node d14 09:01:18.917> Switching to failover node d14 09:01:18.933> Switching to failover node d14 09:01:18.949> Switching to failover node d14 09:01:18.964> Switching to failover node d14 09:01:18.996> Switching to failover node d14 09:01:19.011> Switching to failover node d14 09:01:19.027> Switching to failover node d14 09:01:19.042> Switching to failover node d14 09:01:19.058> Switching to failover node d14 09:01:19.074> Switching to failover node d14 09:01:19.089> Switching to failover node d14 09:01:19.105> Switching to failover node d14 09:01:19.136> Switching to failover node Sorry but you didn't follow our guidelines properly: There not exists a pool and the command you entered (.\tokenminer.exe -G -P --opencl-platform 0) is not correct. The option -P is wrong, you have to use -SPlease follow exactly the provided guidelines.
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 08:57:08 AM |
|
Binance smart chain already fixed the issue with high gas fee already, now you running a new project on BSC itself and claiming that you want to fix high gas fee issue? This is a complete waste of time
Now, in this moment, someone is mining at 0.25 USD per minting... Check the price on the Ethereum mainnet for the same transactions for 0xbitcoin... you will see the differences by yourself. And, btw, there was nothing to fix on Binance Smart Chain: it works fine.
|
|
|
|
wanganxiu
Jr. Member
Offline
Activity: 211
Merit: 2
|
|
March 14, 2021, 12:02:32 PM |
|
Binance smart chain already fixed the issue with high gas fee already, now you running a new project on BSC itself and claiming that you want to fix high gas fee issue? This is a complete waste of time
Now, in this moment, someone is mining at 0.25 USD per minting... Check the price on the Ethereum mainnet for the same transactions for 0xbitcoin... you will see the differences by yourself. And, btw, there was nothing to fix on Binance Smart Chain: it works fine. You are deceiving people. No one has mined them. All three addresses are coins that you transferred to them. . No one has dug up at all. . . You are fooling everyone. There is evidence here, for a long time, is a new project so difficult to mine? ? You also said that others are mining at high gas costs, you just want everyone’s private keys to steal coins https://bscscan.com/token/0xe7cb24f449973d5b3520e5b93d88b405903c75fb
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 02:51:35 PM |
|
Binance smart chain already fixed the issue with high gas fee already, now you running a new project on BSC itself and claiming that you want to fix high gas fee issue? This is a complete waste of time
Now, in this moment, someone is mining at 0.25 USD per minting... Check the price on the Ethereum mainnet for the same transactions for 0xbitcoin... you will see the differences by yourself. And, btw, there was nothing to fix on Binance Smart Chain: it works fine. You are deceiving people. No one has mined them. All three addresses are coins that you transferred to them. . No one has dug up at all. . . You are fooling everyone. There is evidence here, for a long time, is a new project so difficult to mine? ? You also said that others are mining at high gas costs, you just want everyone’s private keys to steal coins https://bscscan.com/token/0xe7cb24f449973d5b3520e5b93d88b405903c75fbHey guy, we suggest you to study before writing things you don't know or are not able to manage. It is beautiful to increase your knowledge, and furthermore it may help you to find also new jobs: study Solidity, study our verified smart contact, study the 0xbitcoin contract audit, study EVM, study how the token mining works (check also 0xbitcoin.org which has several interesting videos about that) and avoid to use "red" to highlight your nonsensical, lying foolish sentences.
|
|
|
|
miner29
|
|
March 14, 2021, 04:17:32 PM |
|
Definitely scam project. Token cannot be mined
User wanganxiu called it correctly....OP wants your wallet keys to steal your crypto. Nothing more.
NEVER give your keys/seed....no legitimate project needs or wants those.
Nothing of value here.
Like several other new coins (or not so new) thst have no value , no future, and are just scams.
|
|
|
|
wanganxiu
Jr. Member
Offline
Activity: 211
Merit: 2
|
|
March 14, 2021, 04:40:00 PM |
|
Definitely scam project. Token cannot be mined
User wanganxiu called it correctly....OP wants your wallet keys to steal your crypto. Nothing more.
NEVER give your keys/seed....no legitimate project needs or wants those.
Nothing of value here.
Like several other new coins (or not so new) thst have no value , no future, and are just scams.
It's a scam. . . I reminded it all above. . . The developer also complained about me. . . .
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 05:04:49 PM |
|
Definitely scam project. Token cannot be mined
User wanganxiu called it correctly....OP wants your wallet keys to steal your crypto. Nothing more.
NEVER give your keys/seed....no legitimate project needs or wants those.
Nothing of value here.
Like several other new coins (or not so new) thst have no value , no future, and are just scams.
Very bad surprise that an expert of this forum tells we are scammers. Our contract is verified, the source code can be read by everyone: why scammers should make their contract publicly readable? Our contract derives from 0xbitcoin contract, and it is identical in terms of state-modifying functions. Are then you telling that they also are scammers??? then also all those who audited the contract are scammers too? ?? Please, if you have troubles with mining, ask directly us what the problem is before offending people that only want to promote the use of cryptos. You are free to not trust in the token mining system, but please, do not offend honest people. The address and privateKey are required to submit solutions to the smart contract, in other words they are used to sign transactions that allow the tokens to be minted (see "mint" function inside the smart contract) and to be transferred into your wallets if you win the challenge. We report in any case, the complete tokenminer.ini and start-mining.bat, both for GPUs and CPUs files to launch the MVis-tokenminer v2.2.0 (the latest you can download from here), already configured for mining (simply copy-paste, you have to edit only the section related to your miner address): ------------------------------------------------ tokenminer.ini file:------------------------------------------------ [General] ; BNbitcoin tokenminer.ini file ;-------------------------------------------------------- [Node] ; BSC RPC Endpoints, select one of these ; ; https://bsc-dataseed.binance.org; https://bsc-dataseed1.defibit.io; https://bsc-dataseed1.ninicoin.ioHost=https://bsc-dataseed.binance.org RPCPort= ;-------------------------------------------------------- [Node2] ;-------------------------------------------------------- [0xBitcoin] ; SOLO MINING: Your BNB account and private key. Note the PK does NOT start ; with 0x. Mining rewards will be deposited to this account. Transaction ; fees will be DRAWN from this account. Make sure you have enough funds!! ; If you have multiple mining rigs, make sure each rig is running under a ; separate BNB account, to prevent nonce collisions if they happen to submit ; txs at nearly the same time. MinerAcct=0x........................................ AcctPK=................................................................ ; Difficulty assignment. Defaults to Pool assigned. You can also ; specify a value in minutes to have the miner self-assign a difficulty ; level to target an average number of minutes per share. ; Currently, no mining pools support self-assigned difficulty. MinutesPerShare=Pool ; BNbitcoin contract address. normally you will not change this. TokenContract=0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb ; THE REMAINING SETTINGS IN THIS SECTION APPLY ONLY TO SOLO MINING: ; when your miner finds a solution, transactions will be submitted with this ; amount of gas (gwei). You can change this setting 'on the fly' (without having ; to restart the miner). All other setting changes require the miner to be restarted. GasPrice=10 ; Set to 1 to enable gas price bidding. Transactions will be submitted ; with [GasPrice] gas, unless there is someone else bidding, in which case ; the gas price will be set to the price of the competing bid + [BidTop], up ; to a maximum of [MaxGasPrice]. This feature has only been tested when running ; Geth as a local node. It is NOT supported by Infura nodes. GasPriceBidding=0 ; max gas price you're willing to bid up to MaxGasPrice=35 ; gas limit used when submitting solution GasLimit=200000 ; the # of gwei to top the highest bidder BidTop=2 ; if you have multiple mining rigs, specify a shared folder to make sure ; multiple miners don't try to submit a solution for the same challenge. ; eg. ChallengeFolder=\\DESKTOP\folder_name ChallengeFolder= ;-------------------------------------------------------- [ThermalProtection] ; Temperature provider ('amd_adl' or 'speedfan') TempProvider=speedfan ; Default temperature at which GPU throttling is activated. This applies to all GPUs on this mining rig. ; Note: throttling is at the hashing level, not the driver level. ThrottleTemp=75 ; Number of seconds after which the entire mining rig will shutdown if one or more GPUs ; remain at or above ThrottleTemp. ShutDown=36000 ------------------------------------------------ start-miningGPU.bat file:------------------------------------------------ .\tokenminer.exe -G -S pause ------------------------------------------------ start-miningCPU.bat file:------------------------------------------------ .\tokenminer.exe -C -S pause Hope this helps Tell us if you still experience problems.
|
|
|
|
miner29
|
|
March 14, 2021, 05:08:22 PM |
|
Definitely scam project. Token cannot be mined
User wanganxiu called it correctly....OP wants your wallet keys to steal your crypto. Nothing more.
NEVER give your keys/seed....no legitimate project needs or wants those.
Nothing of value here.
Like several other new coins (or not so new) thst have no value , no future, and are just scams.
It's a scam. . . I reminded it all above. . . The developer also complained about me. . . . Thats how you can tell....have been post attcked by another scam coin operator here as well. They hate when you point out what and why its a scam. They throw a tantrum..and froth...but easy to look at anybodies posts and see...are they helping or scamming. So merit for you sir...youve earned it.👍
|
|
|
|
miner29
|
|
March 14, 2021, 05:13:16 PM |
|
Definitely scam project. Token cannot be mined
User wanganxiu called it correctly....OP wants your wallet keys to steal your crypto. Nothing more.
NEVER give your keys/seed....no legitimate project needs or wants those.
Nothing of value here.
Like several other new coins (or not so new) thst have no value , no future, and are just scams.
Very bad surprise that an expert of this forum tells we are scammers. Our contract is verified, the source code can be read by everyone: why scammers should make their contract publicly readable? Our contract derives from 0xbitcoin contract, and it is identical in terms of state-modifying functions. Are then you telling that they also are scammers??? then also all those who audited the contract are scammers too? ?? Please, if you have troubles with mining, ask directly us what the problem is before offending people that only want to promote the use of cryptos. You are free to not trust in the token mining system, but please, do not offend honest people. The address and privateKey are required to submit solutions to the smart contract, in other words they are used to sign transactions that allow the tokens to be minted (see "mint" function inside the smart contract) and to be transferred into your wallets if you win the challenge. We report in any case, the complete tokenminer.ini and start-mining.bat, both for GPUs and CPUs files to launch the MVis-tokenminer v2.2.0 (the latest you can download from here), already configured for mining (simply copy-paste, you have to edit only the section related to your miner address): ------------------------------------------------ tokenminer.ini file:------------------------------------------------ [General] ; BNbitcoin tokenminer.ini file ;-------------------------------------------------------- [Node] ; BSC RPC Endpoints, select one of these ; ; https://bsc-dataseed.binance.org; https://bsc-dataseed1.defibit.io; https://bsc-dataseed1.ninicoin.ioHost=https://bsc-dataseed.binance.org RPCPort= ;-------------------------------------------------------- [Node2] ;-------------------------------------------------------- [0xBitcoin] ; SOLO MINING: Your BNB account and private key. Note the PK does NOT start ; with 0x. Mining rewards will be deposited to this account. Transaction ; fees will be DRAWN from this account. Make sure you have enough funds!! ; If you have multiple mining rigs, make sure each rig is running under a ; separate BNB account, to prevent nonce collisions if they happen to submit ; txs at nearly the same time. MinerAcct=0x........................................ AcctPK=................................................................ ; Difficulty assignment. Defaults to Pool assigned. You can also ; specify a value in minutes to have the miner self-assign a difficulty ; level to target an average number of minutes per share. ; Currently, no mining pools support self-assigned difficulty. MinutesPerShare=Pool ; BNbitcoin contract address. normally you will not change this. TokenContract=0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb ; THE REMAINING SETTINGS IN THIS SECTION APPLY ONLY TO SOLO MINING: ; when your miner finds a solution, transactions will be submitted with this ; amount of gas (gwei). You can change this setting 'on the fly' (without having ; to restart the miner). All other setting changes require the miner to be restarted. GasPrice=10 ; Set to 1 to enable gas price bidding. Transactions will be submitted ; with [GasPrice] gas, unless there is someone else bidding, in which case ; the gas price will be set to the price of the competing bid + [BidTop], up ; to a maximum of [MaxGasPrice]. This feature has only been tested when running ; Geth as a local node. It is NOT supported by Infura nodes. GasPriceBidding=0 ; max gas price you're willing to bid up to MaxGasPrice=35 ; gas limit used when submitting solution GasLimit=200000 ; the # of gwei to top the highest bidder BidTop=2 ; if you have multiple mining rigs, specify a shared folder to make sure ; multiple miners don't try to submit a solution for the same challenge. ; eg. ChallengeFolder=\\DESKTOP\folder_name ChallengeFolder= ;-------------------------------------------------------- [ThermalProtection] ; Temperature provider ('amd_adl' or 'speedfan') TempProvider=speedfan ; Default temperature at which GPU throttling is activated. This applies to all GPUs on this mining rig. ; Note: throttling is at the hashing level, not the driver level. ThrottleTemp=75 ; Number of seconds after which the entire mining rig will shutdown if one or more GPUs ; remain at or above ThrottleTemp. ShutDown=36000 ------------------------------------------------ start-miningGPU.bat file:------------------------------------------------ .\tokenminer.exe -G -S pause ------------------------------------------------ start-miningCPU.bat file:------------------------------------------------ .\tokenminer.exe -C -S pause Hope this helps Tell us if you still experience problems. You should proobaby read your own website...it states “ The original smart contract of 0xbitcoin has been audited and no relevant issues are present.” Which means 0xbitcoin has been...NOT this token. The whole “ AcctPK=[private key of your miner account without 0x prefix]” is the scam. Ive mined 0xbitcoin and never had to use my keys. Go cry some more.
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 05:31:03 PM |
|
Just to clarify:
WE HAVE NO WAY TO ACCESS YOUR ADDRESS + PRIVATE KEY!
You set them inside YOUR tokenminer.ini file and THERE IS NO WAY for us to retrieve information about your private key!!!!!
Look yourself at the smart contract:
function mint(uint256 nonce, bytes32 challenge_digest) public returns (bool success) {
//the PoW must contain work that includes a recent BSC block hash (challenge number) and the msg.sender's address to prevent MITM attacks bytes32 digest = keccak256(challengeNumber, msg.sender, nonce );
//the challenge digest must match the expected if (digest != challenge_digest) revert();
//the digest must be smaller than the target if(uint256(digest) > miningTarget) revert();
//only allow one reward for each challenge bytes32 solution = solutionForChallenge[challengeNumber]; solutionForChallenge[challengeNumber] = digest; if(solution != 0x0) revert(); //prevent the same answer from awarding twice
uint reward_amount = getMiningReward();
balances[msg.sender] = balances[msg.sender].add(reward_amount);
tokensMinted = tokensMinted.add(reward_amount);
//Cannot mint more tokens than there are assert(tokensMinted <= maxSupplyForEra);
//set readonly diagnostics data lastRewardTo = msg.sender; lastRewardAmount = reward_amount; lastRewardBscBlockNumber = block.number;
_startNewMiningEpoch();
Mint(msg.sender, reward_amount, epochCount, challengeNumber );
return true;
}
I hope someone who's reading this post, and knows the 0xbitcoin project, can explain, maybe better than us and with other words, that their account is safe.
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 05:37:58 PM |
|
Definitely scam project. Token cannot be mined
User wanganxiu called it correctly....OP wants your wallet keys to steal your crypto. Nothing more.
NEVER give your keys/seed....no legitimate project needs or wants those.
Nothing of value here.
Like several other new coins (or not so new) thst have no value , no future, and are just scams.
Very bad surprise that an expert of this forum tells we are scammers. Our contract is verified, the source code can be read by everyone: why scammers should make their contract publicly readable? Our contract derives from 0xbitcoin contract, and it is identical in terms of state-modifying functions. Are then you telling that they also are scammers??? then also all those who audited the contract are scammers too? ?? Please, if you have troubles with mining, ask directly us what the problem is before offending people that only want to promote the use of cryptos. You are free to not trust in the token mining system, but please, do not offend honest people. The address and privateKey are required to submit solutions to the smart contract, in other words they are used to sign transactions that allow the tokens to be minted (see "mint" function inside the smart contract) and to be transferred into your wallets if you win the challenge. We report in any case, the complete tokenminer.ini and start-mining.bat, both for GPUs and CPUs files to launch the MVis-tokenminer v2.2.0 (the latest you can download from here), already configured for mining (simply copy-paste, you have to edit only the section related to your miner address): ------------------------------------------------ tokenminer.ini file:------------------------------------------------ [General] ; BNbitcoin tokenminer.ini file ;-------------------------------------------------------- [Node] ; BSC RPC Endpoints, select one of these ; ; https://bsc-dataseed.binance.org; https://bsc-dataseed1.defibit.io; https://bsc-dataseed1.ninicoin.ioHost=https://bsc-dataseed.binance.org RPCPort= ;-------------------------------------------------------- [Node2] ;-------------------------------------------------------- [0xBitcoin] ; SOLO MINING: Your BNB account and private key. Note the PK does NOT start ; with 0x. Mining rewards will be deposited to this account. Transaction ; fees will be DRAWN from this account. Make sure you have enough funds!! ; If you have multiple mining rigs, make sure each rig is running under a ; separate BNB account, to prevent nonce collisions if they happen to submit ; txs at nearly the same time. MinerAcct=0x........................................ AcctPK=................................................................ ; Difficulty assignment. Defaults to Pool assigned. You can also ; specify a value in minutes to have the miner self-assign a difficulty ; level to target an average number of minutes per share. ; Currently, no mining pools support self-assigned difficulty. MinutesPerShare=Pool ; BNbitcoin contract address. normally you will not change this. TokenContract=0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb ; THE REMAINING SETTINGS IN THIS SECTION APPLY ONLY TO SOLO MINING: ; when your miner finds a solution, transactions will be submitted with this ; amount of gas (gwei). You can change this setting 'on the fly' (without having ; to restart the miner). All other setting changes require the miner to be restarted. GasPrice=10 ; Set to 1 to enable gas price bidding. Transactions will be submitted ; with [GasPrice] gas, unless there is someone else bidding, in which case ; the gas price will be set to the price of the competing bid + [BidTop], up ; to a maximum of [MaxGasPrice]. This feature has only been tested when running ; Geth as a local node. It is NOT supported by Infura nodes. GasPriceBidding=0 ; max gas price you're willing to bid up to MaxGasPrice=35 ; gas limit used when submitting solution GasLimit=200000 ; the # of gwei to top the highest bidder BidTop=2 ; if you have multiple mining rigs, specify a shared folder to make sure ; multiple miners don't try to submit a solution for the same challenge. ; eg. ChallengeFolder=\\DESKTOP\folder_name ChallengeFolder= ;-------------------------------------------------------- [ThermalProtection] ; Temperature provider ('amd_adl' or 'speedfan') TempProvider=speedfan ; Default temperature at which GPU throttling is activated. This applies to all GPUs on this mining rig. ; Note: throttling is at the hashing level, not the driver level. ThrottleTemp=75 ; Number of seconds after which the entire mining rig will shutdown if one or more GPUs ; remain at or above ThrottleTemp. ShutDown=36000 ------------------------------------------------ start-miningGPU.bat file:------------------------------------------------ .\tokenminer.exe -G -S pause ------------------------------------------------ start-miningCPU.bat file:------------------------------------------------ .\tokenminer.exe -C -S pause Hope this helps Tell us if you still experience problems. You should proobaby read your own website...it states “ The original smart contract of 0xbitcoin has been audited and no relevant issues are present.” Which means 0xbitcoin has been...NOT this token. The whole “ AcctPK=[private key of your miner account without 0x prefix]” is the scam. Ive mined 0xbitcoin and never had to use my keys. Go cry some more. Ok, then, please do this: do exactly the same procedure you used for mining 0xbitcoin, but with the settings of BNbitcoin (RPC URL: https://bsc-dataseed.binance.org, target contract address: 0xE7Cb24F449973D5B3520E5b93D88B405903c75Fb, account on BSC). We are not interested on how you mine the token: MVis-tokenminer is a possibility, but many other exist... Try in your way, with the software/tools you are confident to use.
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 05:46:14 PM |
|
You should proobaby read your own website...it states “ The original smart contract of 0xbitcoin has been audited and no relevant issues are present.”
Which means 0xbitcoin has been...NOT this token.
The whole “ AcctPK=[private key of your miner account without 0x prefix]” is the scam. Ive mined 0xbitcoin and never had to use my keys.
Go cry some more You are not fair. You have omitted the remaining part of the description: all the state modifying functions are IDENTICAL! We have introduced only a callable getOwner() function, as required in the BEP-20 standards. Hence the contract safety is IDENTICAL! Maybe you did not compared the contracts... Luckily both the contracts are verified and publicly readable, and everyone can verify what I'm saying...
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 14, 2021, 06:12:57 PM Last edit: March 15, 2021, 04:10:23 PM by BNbitcoin |
|
Important notice:Some users are complaining because we said that inside the miner tokenminer.ini settings of the MVis-tokenminer app, the private key is required, while they have never used their private key for mining. Let's make the following clarifications: For SOLO mining (the configuration we refer to) the private key is necessary to sign the minting transactions. For POOL mining (as we think that many user experienced this kind of 0xbitcoin mining) the private key is not requested. This Youtube video clarifies this aspect Today we do not have pools ready for BNbitcoin (and there is no need of pools since difficulty is low), exactly like 3 years ago in the earlier days after 0xbitcoin contract deployment. The two ways of mining are different: with pool mining the miner contributes with his computational resources (powerful GPU or mining rig), but does not pay any fee for submitting solutions (and this is the reason why the private key is not required). In this case the private key of the pool masternode account is used to sign the transaction towards the contract (and hence is the masternode account that pays the gas fees and takes the reward which is after splitted between the contributors/miners proportionally to the shared computational power). For solo mining you are the pool of yourself, then you are your own masternode and you have to use your account + your private key to submit minting solutions to the contract and to pay the gas fees. Now it's clear that both wanganxiu and miner29 were referring to pool mining, but we refer to the solo mining (like in post #3) because today no pools are available: this alignment was necessary.
|
|
|
|
miner29
|
|
March 15, 2021, 04:32:31 AM |
|
You should proobaby read your own website...it states “ The original smart contract of 0xbitcoin has been audited and no relevant issues are present.”
Which means 0xbitcoin has been...NOT this token.
The whole “ AcctPK=[private key of your miner account without 0x prefix]” is the scam. Ive mined 0xbitcoin and never had to use my keys.
Go cry some more You are not fair. You have omitted the remaining part of the description: all the state modifying functions are IDENTICAL! We have introduced only a callable getOwner() function, as required in the BEP-20 standards. Hence the contract safety is IDENTICAL! Maybe you did not compared the contracts... Luckily both the contracts are verified and publicly readable, and everyone can verify what I'm saying... But yours isnt audited. Some elses is not the same as this one being audited...you are making a false equivalence. Get it audited not point to another and say we are same.....
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 15, 2021, 06:26:54 AM Last edit: March 15, 2021, 08:28:00 AM by BNbitcoin |
|
But yours isnt audited. Some elses is not the same as this one being audited...you are making a false equivalence.
Get it audited not point to another and say we are same.....
Yes, for sure we will ask for an audit to have confirmation that the contract is 100% aligned with the 0xbitcoin contract. But we are sure when we say that the contract is equivalent because in Solidity there are 2 kinds of functions: 1) State-modifying functions (transfer, mint,...) which alter the state of the blockchain and require gas to be activated. 2) Callable (read-only) functions (name, symbol,...): they do not alter the state of the blockchain and hence do not consume gas. The BEP-20 standard for the Binance Smart Chain, at paragraph 5.1.1.6, requires an extended method getOwner() function not available in the EIP-20 standard: this method is a read-only function (point 2) above) that provides the contract owner address when called. We introduced such function to be compliant with BSC, but all the state-modifying functions have been left unaltered in their structures respect to the 0xbitcoin smart contract. You can verify this by comparing the deployed source codes.
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 21, 2021, 04:17:47 PM |
|
Good news / update: 2nd difficulty adjustment period has been reached (4032 epochs) a little early thanks to the solo-miners' firepower. Difficulty therefore readjusted, but it is still quite easy to mine blocks. It's still a good moment to join in...
|
|
|
|
|
BitKongy
Member
Offline
Activity: 405
Merit: 19
|
|
April 25, 2021, 09:19:43 AM |
|
What is this project trying to solve apart from been the first POW coin to exists on BSC is that all that this bnbitcoin have to offer? We are now in a different time in crypto space, even new POW coins must have good use case
|
|
|
|
crnxhh
Newbie
Offline
Activity: 6
Merit: 0
|
|
April 25, 2021, 09:48:02 AM |
|
as far as I know it's the first commodity existing on bsc, it's deflationary like btc and you can trade it for much lower fee's on BSC than ETH.
so for me it aggregates all benefits.
|
|
|
|
Looper_U
Member
Offline
Activity: 369
Merit: 16
$CYBERCASH METAVERSE
|
|
April 25, 2021, 10:19:42 AM |
|
This BNbitcoin is talking about low gas fee, isn't that what BSC fixed? Op makes it sounds like BNbitcoin just did that right, honestly I don't see how this coin will be demanding other than people mining it, so listen to this, stop already mining isn't adoption
|
|
|
|
crnxhh
Newbie
Offline
Activity: 6
Merit: 0
|
|
April 25, 2021, 10:44:57 AM |
|
there must be a misunderstanding. As far as i can see bnbtc just USES the fact that bsc has fixed the high gas fees. The fees are much lower to mine and especially trade compared to e.g. 0xbtc.
|
|
|
|
|
a1002058373
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 02, 2021, 09:23:24 PM |
|
Is there a professional who thinks BNBTC is a scam? Thank you
|
|
|
|
a1002058373
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 02, 2021, 09:39:00 PM |
|
Definitely scam project. Token cannot be mined
User wanganxiu called it correctly....OP wants your wallet keys to steal your crypto. Nothing more.
NEVER give your keys/seed....no legitimate project needs or wants those.
Nothing of value here.
Like several other new coins (or not so new) thst have no value , no future, and are just scams.
It's a scam. . . I reminded it all above. . . The developer also complained about me. . . . Thats how you can tell....have been post attcked by another scam coin operator here as well. They hate when you point out what and why its a scam. They throw a tantrum..and froth...but easy to look at anybodies posts and see...are they helping or scamming. So merit for you sir...youve earned it.👍 Hello, do you still think BNBTC is a scam? Thank you
|
|
|
|
miner29
|
|
June 03, 2021, 01:20:21 PM |
|
Well you tagged me. Im the guy pointing out the claim its been audited is untrue. BNbitcoin even conceeded the point that it actually hasnt been audited.
If its good seems an audit would be something already done. See false equivalence. Another project this is “based” on was…that is not the same as this one having been audited.
So my point still stands…mr…new account just made yesterday.
|
|
|
|
a1002058373
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 06, 2021, 04:47:22 PM |
|
Well you tagged me. Im the guy pointing out the claim its been audited is untrue. BNbitcoin even conceeded the point that it actually hasnt been audited.
If its good seems an audit would be something already done. See false equivalence. Another project this is “based” on was…that is not the same as this one having been audited.
So my point still stands…mr…new account just made yesterday.
Yes, a new account registered because you want to learn more about this project Do you think it has investment value
|
|
|
|
crnxhh
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 30, 2021, 06:50:46 AM |
|
Well you tagged me. Im the guy pointing out the claim its been audited is untrue. BNbitcoin even conceeded the point that it actually hasnt been audited.
If its good seems an audit would be something already done. See false equivalence. Another project this is “based” on was…that is not the same as this one having been audited.
You're right. BNbitcoin has not been audited by a big company until now. The source has just been audited by the community. It is no rocket science to understand the contract and its functions. Anyone with some basic solidity knowledge can do this. Since it's a PoW community project not funded by big companys, having ICOs, presales or big developer wallets, there is only the community who could pay the 10k USD to pay such an audit. There is a project development funding wallet where donations for such things can be sent. See the website for details.
|
|
|
|
crnxhh
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 30, 2021, 07:07:55 AM |
|
Just to keep you updated: BNBTC is listed on CMC since a while: https://coinmarketcap.com/currencies/bnbitcoin/A community contributor created a page to view the actual contract stats. http://bnbitcoin.xyzThere are currently more than 4.000.000 BNBTC beeing minted, distributed to 3289 holders, while this number is increasing every day. Currently overall hashrate has just been massively increased and is now about 9-10 TH. Just for comparsion: a NVIDIA RTX 3080 GPU does about 1800MH/s, so this is the equivalent of about 5500 such GPUs. Not bad for a "SCAM" token, right?
|
|
|
|
BNbitcoin (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
July 12, 2022, 04:47:23 PM |
|
BNBTC is live and strong, an update was needed to this post! FPGA devices (like Hashaltcoin Blackminers F1 and F2) are now the standard tech for mining, and the mining pool is now at https://0xpool.me. You can monitor BNbitcoin statistics at https://stats.bnbitcoin.org. The main info website has been updated to the current data, check it out at https://bnbitcoin.org. Have a great day!
|
|
|
|
|
elmo40
Member
Offline
Activity: 659
Merit: 15
|
|
January 18, 2024, 05:29:46 AM |
|
yay go FPGA Now 6 people in whole world can mine for profit...
|
|
|
|
|