ASRock H110 not showing any signal

[Vann]

I've had my H110 Pro BTC+ running with 13 RX 580's for almost a year since it came out without issue. Very easy board to configure for multiple cards. If anything, the PCI-E slot layout is poorly thought out since it will cause the usb connector on the riser to short out on the back of the adjacent PCI-E connector causing the GPU to not be recognized, but it's an easy fix with two pieces of electrical tape to cover the back of the riser connectors. Otherwise a solid board, but I get it can be frustraing when things are not working out.

The Asus B250 mining expert, Biostar TB250-BTC Pro or Gigabyte GA-B250-FinTech are also good choices for 12-13 GPU rigs and should work fine with your current hardware.

[1715147683]

1715147683

[1715147683]

1715147683

[1715147683]

1715147683

[1715147683]

1715147683

[bouffemonshort]

Hi I have the same problem with no image coming out of the DVI socket except with a graphics card plugged into the PCIx16 port BUT I have a 2400Mhz memory module could this be the problem?

[JayDDee]

Hi I have the same problem with no image coming out of the DVI socket except with a graphics card plugged into the PCIx16 port BUT I have a 2400Mhz memory module could this be the problem?

This thread is 2 years old with a lot of baggage and no resolution. You should start a new thread and
provide more info on your specific setup and problem. If it works with a GPU it's not a RAM problem.

[bouffemonshort]

yes it's true but I didn't want to create a new post if the answer was so simple and already discovered
I have ram 2400 Ballistix with an Intel Celeron Pentium G4920 I would rather 2133mhz it looks like?

[Crypt0_D0n]

I solved my no signal issue simply by sticking the RAM in the other RAM slot of the mainboard.