ironside444 (OP)
Newbie
 Offline
Activity: 21
Merit: 6
|
 |
April 13, 2021, 04:31:45 PM
Last edit: April 14, 2021, 09:57:38 PM by ironside444 |
|
Wondering whether my T15 is completely dead or if it needs a new main board. Can anyone tell from this log? Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 17/7, WL threshold: 4096, image sequence number: 131776731
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AD63E5E5-DA5C-4DAD-9550-959A80DA7C1B, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3652/898, WL threshold: 4096, image sequence number: 267841159
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 31AA9D87-7438-4BA5-AB48-E0CFF57D9D53, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
[2021-04-09 15:32:44.984] start listen on 6060 ...
2021-04-09 15:49:22 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-04-09 15:49:22 driver-btm-soc.c:8125:bitmain_soc_init: T15
2021-04-09 15:49:22 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-04-09 15:49:22 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-04-09 15:49:22 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-04-09 15:49:22 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-04-09 15:49:22 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-04-09 15:49:22 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-04-09 15:49:22 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2021-04-09 15:49:22 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2021-04-09 15:49:22 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-04-09 15:49:24 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8074f42429e04814
2021-04-09 15:49:24 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-04-09 15:49:24 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7
2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-04-09 15:49:31 eeprom.c:1418:eeprom_load: done
2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101
2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100
2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2021-04-09 15:49:32 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-04-09 15:49:36 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-04-09 15:49:37 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2021-04-09 15:49:42 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2021-04-09 15:49:42 dspic33ep16gs202.c:538:reset_pic: chain[2] ok |
|
|
|
|
|
|
|
|
|
|
|
Unlike traditional banking where clients have only a few account numbers, with Bitcoin people can create an unlimited number of accounts (addresses). This can be used to easily track payments, and it improves anonymity.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4102
Merit: 7723
'The right to privacy matters'
|
|
April 13, 2021, 04:40:40 PM |
|
Wondering whether my T15 is completely dead or if it needs a new main board. Can anyone tell from this log? Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 17/7, WL threshold: 4096, image sequence number: 131776731
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AD63E5E5-DA5C-4DAD-9550-959A80DA7C1B, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3652/898, WL threshold: 4096, image sequence number: 267841159
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 31AA9D87-7438-4BA5-AB48-E0CFF57D9D53, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
[2021-04-09 15:32:44.984] start listen on 6060 ...
2021-04-09 15:49:22 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-04-09 15:49:22 driver-btm-soc.c:8125:bitmain_soc_init: T15
2021-04-09 15:49:22 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-04-09 15:49:22 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-04-09 15:49:22 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-04-09 15:49:22 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-04-09 15:49:22 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-04-09 15:49:22 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-04-09 15:49:22 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2021-04-09 15:49:22 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2021-04-09 15:49:22 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-04-09 15:49:24 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8074f42429e04814
2021-04-09 15:49:24 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-04-09 15:49:24 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7
2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-04-09 15:49:31 eeprom.c:1418:eeprom_load: done
2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101
2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100
2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2021-04-09 15:49:32 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-04-09 15:49:36 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-04-09 15:49:37 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2021-04-09 15:49:42 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2021-04-09 15:49:42 dspic33ep16gs202.c:538:reset_pic: chain[2] ok I coded it to be correctly fitted "2021-04-09 15:49:24 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8074f42429e04814 2021-04-09 15:49:24 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B 2021-04-09 15:49:24 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7 2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist 2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist 2021-04-09 15:49:24 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist 2021-04-09 15:49:31 eeprom.c:1418:eeprom_load: done 2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101 2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100 2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101 2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100 2021-04-09 15:49:31 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101 2021-04-09 15:49:31 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100 2021-04-09 15:49:32 dspic33ep16gs202.c:538:reset_pic: chain[0] ok 2021-04-09 15:49:36 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok 2021-04-09 15:49:37 dspic33ep16gs202.c:538:reset_pic: chain[1] ok 2021-04-09 15:49:42 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok 2021-04-09 15:49:42 dspic33ep16gs202.c:538:reset_pic: chain[2] ok" is this how it ends as it does not show any issues wrong. do you have a second unit or just the one? |
|
|
|
ironside444 (OP)
Newbie
Offline
Activity: 21
Merit: 6
|
|
April 13, 2021, 04:45:01 PM |
|
Just doesn't seem to "kick in" while running. No stats displayed at all.
|
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4102
Merit: 7723
'The right to privacy matters'
|
|
April 13, 2021, 04:51:00 PM |
|
Just doesn't seem to "kick in" while running. No stats displayed at all.
Okay lets try fully removing the center board. Run it with just 2 boards. I do not see any errors in the log. Maybe a weak psu is the issue. |
|
|
|
BitMaxz
Legendary
Offline
Activity: 3234
Merit: 2941
Block halving is coming.
|
|
April 13, 2021, 11:43:27 PM |
|
Just doesn't seem to "kick in" while running. No stats displayed at all.
You mean it does not have any stats show in the dashboard under miner status? No hashrate, no fan, no detected chains, and no pools? But the logs show normal. Maybe you have a problem accessing the dashboard and it shows nothing? Try to access with incognito mode or other browsers if that's the case. If not work then maybe your miner has a corrupted program and it might need to reflash the firmware to fix this issue. Try to reflash it with this firmware https://service.bitmain.com/support/download?product=Antminer%20T15If not work try SD card flashing download the "T15 SD card recovery image.zip" from this link below - https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20imageOr you might be talking about stats on the pool? Incorrect pool setup might lead the miner to stop hashing take so take note of extra spaces and let us know if what pool do you mine. |
|
|
|
ironside444 (OP)
Newbie
Offline
Activity: 21
Merit: 6
|
|
April 14, 2021, 12:29:46 PM
Last edit: April 14, 2021, 09:57:02 PM by ironside444 |
|
I've reflashed the software and have disconnected one of the hash boards. Here's what I get now: Miner Type Antminer T15 Hostname antMiner Model GNU/Linux Hardware Version Socket connect failed: Connection refused Kernel Version Linux 4.6.0-xilinx-gff8137b-dirty #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 File System Version Fri Dec 13 15:46:16 CST 2019 CGminer Version Uptime 7 Load Average 0.09, 0.16, 0.08 The pool is set up correctly, as I have an S17 using the same details with a different address. The miner status table is just empty. Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 17/7, WL threshold: 4096, image sequence number: 131776731
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AD63E5E5-DA5C-4DAD-9550-959A80DA7C1B, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3652/898, WL threshold: 4096, image sequence number: 267841159
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 31AA9D87-7438-4BA5-AB48-E0CFF57D9D53, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
[2021-04-14 12:23:15.376] start listen on 6060 ...
2021-04-14 12:22:45 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-04-14 12:22:45 driver-btm-soc.c:8125:bitmain_soc_init: T15
2021-04-14 12:22:45 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-04-14 12:22:45 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-04-14 12:22:45 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-04-14 12:22:45 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-04-14 12:22:45 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-04-14 12:22:45 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-04-14 12:22:45 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2021-04-14 12:22:45 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2021-04-14 12:22:45 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-04-14 12:22:47 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8074f42429e04814
2021-04-14 12:22:47 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-04-14 12:22:47 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x5
2021-04-14 12:22:47 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-04-14 12:22:47 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2021-04-14 12:22:52 eeprom.c:1418:eeprom_load: done
2021-04-14 12:22:52 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2021-04-14 12:22:52 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2021-04-14 12:22:52 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2021-04-14 12:22:52 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2021-04-14 12:22:53 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-04-14 12:22:57 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-04-14 12:22:58 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2021-04-14 12:23:02 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2021-04-14 12:23:02 power.c:137:power_init: power init ...
2021-04-14 12:23:02 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2021-04-14 12:23:02 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2021-04-14 12:23:04 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-04-14 12:23:05 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2021-04-14 12:23:08 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2021-04-14 12:23:38 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.300000
2021-04-14 12:23:38 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 19.300000
2021-04-14 12:23:38 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 19.30, min = 19.30
2021-04-14 12:23:38 power.c:149:set_working_voltage: working_voltage = 19.300000
2021-04-14 12:23:38 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-04-14 12:23:38 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-04-14 12:23:38 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:450 IC[001]:450 IC[002]:450 IC[003]:450 IC[004]:420
IC[005]:420 IC[006]:450 IC[007]:450 IC[008]:450 IC[009]:450
IC[010]:420 IC[011]:450 IC[012]:450 IC[013]:450 IC[014]:450
IC[015]:450 IC[016]:450 IC[017]:420 IC[018]:450 IC[019]:450
IC[020]:450 IC[021]:420 IC[022]:450 IC[023]:450 IC[024]:450
IC[025]:450 IC[026]:420 IC[027]:450 IC[028]:450 IC[029]:450
IC[030]:450 IC[031]:450 IC[032]:450 IC[033]:450 IC[034]:420
IC[035]:420 IC[036]:450 IC[037]:450 IC[038]:450 IC[039]:450
IC[040]:420 IC[041]:450 IC[042]:450 IC[043]:450 IC[044]:450
IC[045]:450 IC[046]:450 IC[047]:420 IC[048]:450 IC[049]:450
IC[050]:450 IC[051]:450 IC[052]:420 IC[053]:450 IC[054]:450
IC[055]:450 IC[056]:450 IC[057]:450 IC[058]:450 IC[059]:420
voltage: 18.60 V
hash rate: 06797 GH/s
freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:510 IC[004]:480
IC[005]:480 IC[006]:510 IC[007]:510 IC[008]:510 IC[009]:510
IC[010]:480 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:510
IC[015]:510 IC[016]:510 IC[017]:480 IC[018]:510 IC[019]:510
IC[020]:510 IC[021]:480 IC[022]:510 IC[023]:510 IC[024]:510
IC[025]:510 IC[026]:480 IC[027]:510 IC[028]:510 IC[029]:510
IC[030]:510 IC[031]:510 IC[032]:510 IC[033]:480 IC[034]:510
IC[035]:480 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510
IC[040]:480 IC[041]:510 IC[042]:510 IC[043]:510 IC[044]:510
IC[045]:510 IC[046]:510 IC[047]:510 IC[048]:480 IC[049]:510
IC[050]:510 IC[051]:510 IC[052]:480 IC[053]:510 IC[054]:510
IC[055]:510 IC[056]:510 IC[057]:510 IC[058]:510 IC[059]:480
voltage in mode2: 19.30 V
hash rate in mode2: 07703 GH/s
2021-04-14 12:23:38 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:465 IC[001]:450 IC[002]:435 IC[003]:465 IC[004]:465
IC[005]:465 IC[006]:435 IC[007]:465 IC[008]:465 IC[009]:450
IC[010]:435 IC[011]:465 IC[012]:465 IC[013]:450 IC[014]:465
IC[015]:450 IC[016]:465 IC[017]:465 IC[018]:465 IC[019]:435
IC[020]:465 IC[021]:465 IC[022]:465 IC[023]:435 IC[024]:450
IC[025]:465 IC[026]:435 IC[027]:450 IC[028]:465 IC[029]:465
IC[030]:465 IC[031]:450 IC[032]:435 IC[033]:465 IC[034]:465
IC[035]:435 IC[036]:465 IC[037]:450 IC[038]:465 IC[039]:465
IC[040]:465 IC[041]:465 IC[042]:450 IC[043]:435 IC[044]:465
IC[045]:465 IC[046]:465 IC[047]:435 IC[048]:465 IC[049]:450
IC[050]:465 IC[051]:465 IC[052]:450 IC[053]:435 IC[054]:465
IC[055]:450 IC[056]:435 IC[057]:465 IC[058]:465 IC[059]:465
voltage: 18.60 V
hash rate: 06987 GH/s
freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:495 IC[004]:510
IC[005]:510 IC[006]:495 IC[007]:510 IC[008]:510 IC[009]:510
IC[010]:495 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:510
IC[015]:510 IC[016]:510 IC[017]:510 IC[018]:510 IC[019]:495
IC[020]:510 IC[021]:495 IC[022]:510 IC[023]:510 IC[024]:510
IC[025]:510 IC[026]:495 IC[027]:510 IC[028]:510 IC[029]:510
IC[030]:510 IC[031]:495 IC[032]:510 IC[033]:510 IC[034]:510
IC[035]:495 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510
IC[040]:510 IC[041]:510 IC[042]:510 IC[043]:495 IC[044]:510
IC[045]:510 IC[046]:510 IC[047]:495 IC[048]:510 IC[049]:510
IC[050]:495 IC[051]:510 IC[052]:510 IC[053]:510 IC[054]:510
IC[055]:510 IC[056]:495 IC[057]:510 IC[058]:510 IC[059]:510
voltage in mode2: 19.30 V
hash rate in mode2: 07752 GH/s
2021-04-14 12:23:39 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-04-14 12:23:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-14 12:23:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-14 12:23:45 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-04-14 12:23:45 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-04-14 12:23:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-14 12:23:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:23:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-14 12:23:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:23:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-14 12:23:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:23:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-14 12:23:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:23:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-14 12:23:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-14 12:23:55 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-14 12:23:55 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2021-04-14 12:23:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-14 12:23:57 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:23:57 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-14 12:23:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:23:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-14 12:23:59 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:23:59 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-14 12:24:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:24:01 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-14 12:24:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-14 12:24:08 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-14 12:24:08 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2021-04-14 12:24:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-14 12:24:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:24:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-14 12:24:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:24:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-14 12:24:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:24:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-14 12:24:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:24:20 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-14 12:24:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-14 12:24:27 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-14 12:24:27 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2021-04-14 12:24:28 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-04-14 12:24:58 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-04-14 12:24:58 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-04-14 12:24:59 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-04-14 12:25:01 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2021-04-14 12:25:01 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-04-14 12:25:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-14 12:25:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-14 12:25:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-14 12:25:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-14 12:25:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-14 12:25:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-14 12:25:11 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-14 12:25:11 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2021-04-14 12:25:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-14 12:25:13 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:13 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-14 12:25:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-14 12:25:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:16 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-14 12:25:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:17 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-14 12:25:20 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-14 12:25:24 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-14 12:25:24 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2021-04-14 12:25:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-14 12:25:27 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-14 12:25:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-14 12:25:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-14 12:25:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-14 12:25:36 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-14 12:25:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-14 12:25:43 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-14 12:25:43 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2021-04-14 12:25:44 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0! |
|
|
|
|
BitMaxz
Legendary
Offline
Activity: 3234
Merit: 2941
Block halving is coming.
|
|
April 14, 2021, 03:53:21 PM |
|
Now it shows no ASIC and you get this "Hardware Version Socket connect failed: Connection refused". What firmware do you use? Do you flash it through an SD card or via update? If you flashed it through an update try to flash it with an SD card flashing use the link that I posted above. If it still doesn't work then philipma1957 might be right so try to remove another hash board the "chain 0". If it still doesn't work then it might be a PSU issue. Another thing is edit your post and use "insert code"  for your kernel logs to make your thread clean and easy to read. |
|
|
|
ironside444 (OP)
Newbie
Offline
Activity: 21
Merit: 6
|
|
April 15, 2021, 03:48:32 PM |
|
Here's the latest with just one hashboard connected. I have also successfully flashed with the SD card. Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 17/7, WL threshold: 4096, image sequence number: 131776731
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AD63E5E5-DA5C-4DAD-9550-959A80DA7C1B, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3652/898, WL threshold: 4096, image sequence number: 267841159
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 31AA9D87-7438-4BA5-AB48-E0CFF57D9D53, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
[2021-04-15 15:44:27.190] start listen on 6060 ...
2021-04-15 15:43:57 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2021-04-15 15:43:57 driver-btm-soc.c:8125:bitmain_soc_init: T15
2021-04-15 15:43:57 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2021-04-15 15:43:57 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2021-04-15 15:43:57 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2021-04-15 15:43:57 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2021-04-15 15:43:57 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2021-04-15 15:43:57 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2021-04-15 15:43:57 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2021-04-15 15:43:57 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2021-04-15 15:43:57 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2021-04-15 15:43:59 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8074f42429e04814
2021-04-15 15:43:59 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2021-04-15 15:43:59 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x1
2021-04-15 15:43:59 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2021-04-15 15:44:01 eeprom.c:1418:eeprom_load: done
2021-04-15 15:44:01 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2021-04-15 15:44:01 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2021-04-15 15:44:02 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2021-04-15 15:44:06 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2021-04-15 15:44:06 power.c:137:power_init: power init ...
2021-04-15 15:44:06 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2021-04-15 15:44:06 power.c:114:power_on: init gpio907
2021-04-15 15:44:08 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-04-15 15:44:11 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2021-04-15 15:44:41 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.300000
2021-04-15 15:44:41 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 19.30, min = 19.30
2021-04-15 15:44:41 power.c:149:set_working_voltage: working_voltage = 19.300000
2021-04-15 15:44:41 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-04-15 15:44:41 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-04-15 15:44:41 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:450 IC[001]:450 IC[002]:450 IC[003]:450 IC[004]:420
IC[005]:420 IC[006]:450 IC[007]:450 IC[008]:450 IC[009]:450
IC[010]:420 IC[011]:450 IC[012]:450 IC[013]:450 IC[014]:450
IC[015]:450 IC[016]:450 IC[017]:420 IC[018]:450 IC[019]:450
IC[020]:450 IC[021]:420 IC[022]:450 IC[023]:450 IC[024]:450
IC[025]:450 IC[026]:420 IC[027]:450 IC[028]:450 IC[029]:450
IC[030]:450 IC[031]:450 IC[032]:450 IC[033]:450 IC[034]:420
IC[035]:420 IC[036]:450 IC[037]:450 IC[038]:450 IC[039]:450
IC[040]:420 IC[041]:450 IC[042]:450 IC[043]:450 IC[044]:450
IC[045]:450 IC[046]:450 IC[047]:420 IC[048]:450 IC[049]:450
IC[050]:450 IC[051]:450 IC[052]:420 IC[053]:450 IC[054]:450
IC[055]:450 IC[056]:450 IC[057]:450 IC[058]:450 IC[059]:420
voltage: 18.60 V
hash rate: 06797 GH/s
freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:510 IC[004]:480
IC[005]:480 IC[006]:510 IC[007]:510 IC[008]:510 IC[009]:510
IC[010]:480 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:510
IC[015]:510 IC[016]:510 IC[017]:480 IC[018]:510 IC[019]:510
IC[020]:510 IC[021]:480 IC[022]:510 IC[023]:510 IC[024]:510
IC[025]:510 IC[026]:480 IC[027]:510 IC[028]:510 IC[029]:510
IC[030]:510 IC[031]:510 IC[032]:510 IC[033]:480 IC[034]:510
IC[035]:480 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510
IC[040]:480 IC[041]:510 IC[042]:510 IC[043]:510 IC[044]:510
IC[045]:510 IC[046]:510 IC[047]:510 IC[048]:480 IC[049]:510
IC[050]:510 IC[051]:510 IC[052]:480 IC[053]:510 IC[054]:510
IC[055]:510 IC[056]:510 IC[057]:510 IC[058]:510 IC[059]:480
voltage in mode2: 19.30 V
hash rate in mode2: 07703 GH/s
2021-04-15 15:44:42 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-04-15 15:44:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-15 15:44:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-15 15:44:48 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2021-04-15 15:44:48 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-04-15 15:44:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-15 15:44:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:44:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-15 15:44:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:44:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-15 15:44:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:44:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-15 15:44:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:44:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-15 15:44:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-15 15:44:58 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-15 15:44:58 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2021-04-15 15:44:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-15 15:45:00 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:45:00 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-15 15:45:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:45:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-15 15:45:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:45:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-15 15:45:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:45:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-15 15:45:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-15 15:45:11 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-15 15:45:11 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2021-04-15 15:45:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-15 15:45:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:45:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-15 15:45:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:45:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-15 15:45:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:45:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-15 15:45:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:45:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-15 15:45:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-15 15:45:30 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-15 15:45:30 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2021-04-15 15:45:31 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2021-04-15 15:46:01 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2021-04-15 15:46:01 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2021-04-15 15:46:02 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2021-04-15 15:46:04 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2021-04-15 15:46:04 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2021-04-15 15:46:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-15 15:46:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-15 15:46:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-15 15:46:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2021-04-15 15:46:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-15 15:46:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-15 15:46:14 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-15 15:46:14 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2021-04-15 15:46:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-15 15:46:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:16 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-15 15:46:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-15 15:46:19 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2021-04-15 15:46:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:20 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-15 15:46:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-15 15:46:27 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-15 15:46:27 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2021-04-15 15:46:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-15 15:46:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-15 15:46:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-15 15:46:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2021-04-15 15:46:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2021-04-15 15:46:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2021-04-15 15:46:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2021-04-15 15:46:46 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2021-04-15 15:46:46 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2021-04-15 15:46:47 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0! |
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2198
Merit: 6332
be constructive or S.T.F.U
|
|
April 16, 2021, 04:50:33 AM |
|
2021-04-15 15:46:46 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
99% all 3 hash boards are dead, or your PSU is failing, it's possible the control board is causing this error but that has less than a 1% chance of being the case, try the other 2 hash boards separately, and then test with another PSU if you have one, if another PSU doesn't fix it (and it will probably won't) then your hash boards are dead, do you know the history of this miner? |
|
|
|
uhhnchain
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 03, 2021, 11:44:14 PM |
|
Have you done a visual check of the hashboards?
|
|
|
|
|
|
