Reseter - a collection of $ for the project

[drawer]

I am presenting a "reset" device used for self-resetting of cryptocurrency miners (GPU) based on the PC motherboard under construction. The device can
can also be used wherever there is a PC motherboard with pins corresponding to the power sw output.

 Principle of operation:

- The program checks the availability of a suitable host in the local network through a network command of the PING type. When there is no response to the PING command,
the appropriate sequence is executed which turns the computer / server on and off.
- the server must be network connected through the RJ45 connector to the local switch
- the server is additionally connected with a 2-wire low-voltage cable (e.g. telephone). On one side, the cable connects to one of the outputs of the relay module
and on the other, it connects to the server's motherboard directly to the pins with the MB output.
- the user sets the reseter's working parameters via the website

for more information follow this kickstarter link:
https://www.kickstarter.com/projects/reseter/reseter?ref=project_link&fbclid=IwAR00gKwkrWQdfJ98znWm7OOlNH2GMji6swZDQ1Tf44Sx-JNfT5hfU9ORXBM

[1715495424]

1715495424

[1715495424]

1715495424

[1715495424]

1715495424

[DaveF]

There are a bunch of devices out there that will do something like that by power cycling incoming voltage:

http://www.digital-loggers.com/lpc.html

There are a bunch of data center PDUs that can be hooked up to monitoring software that will check on multiple devices and do the same thing.
What is nice about using the PDU / power line reboot is that you can use it to reboot just about any miner out there.

Normally, I would say move this to the AltCoin mining section, but since the merge GPU mining has gone to shit, so perhaps changing the product to accommodate high voltage / amperage devices would be better.

-Dave

[drawer]

There are a bunch of devices out there that will do something like that by power cycling incoming voltage:

http://www.digital-loggers.com/lpc.html

There are a bunch of data center PDUs that can be hooked up to monitoring software that will check on multiple devices and do the same thing.
What is nice about using the PDU / power line reboot is that you can use it to reboot just about any miner out there.

Normally, I would say move this to the AltCoin mining section, but since the merge GPU mining has gone to shit, so perhaps changing the product to accommodate high voltage / amperage devices would be better.

-Dave

my device has much more possibilities to control the events of the relay short-circuit length, the time interval between the reset, time restarts and many other settings that such strips do not have