|
November 10, 2022, 05:38:00 PM |
|
I update the post as the same problem could happen to someone else, even if the asic is a bit dated but I don't want others to go through the same problems.
In any case, I do not recommend buying this type of asic from private individuals as they have several problems with both upgrades and spare parts as they are no longer found, if a plate burns, say goodbye.
I arranged (at least I think) like this: As the power supplies burned out I thought I'd look for a way to lower the computing power and eventually entering SSH mode with PuTTy, I gave the command vi /etc/cgminer.conf.template I changed the ac2dc-i-load value from 160000 by default to 140000. These should be the maximum mA set by config, lowering them by about 20A would not force the power supply to work constantly at 99% since the maximum Pout is 163A.
As soon as I have time I will post a guide with screenshots and exact commands. now i found 2 used 2000w power supplies on ebay and bought them fast from the uk. Let's hope that everything goes well.
|