Mining is quite popular in Russia. In fact, the second largest miners population is in Russia due to its cold climatic regions. Just like any other business, mining could be started from garage and places where electricity is cheap. A 100 sq feet garage mostly it comes in that size can accumulated 120 asic machines rig setup. VK.com Russia biggest social media site has all pictures of setups where people share their mining. While accidents are rare but cannot be rules out. Learning about coolants or chemical engineering for mining rig is important to keep the rig temperature neutral.
Immersion-cooled Bitcoin mining, or simply “immersion” is a method of submerging mining hardware into a pool of dielectric (nonconductive) fluid – typically with oils or synthetic liquids – to boost productivity, reduce noise, realize other benefits, and, most importantly, to dissipate the heat generated by the ASIC miners. This approach differs from the traditional air-cooled method, which uses fans to circulate the air around the miners in order to reduce their temperature.
To address overheating, miners utilize two primary cooling methods: air cooling and immersion cooling. For miners, effective heat management is one of the critical aspects of running an efficient and resilient operation because, if not adequately managed, excess heat can lead to increased electricity consumption and decreased efficiency – the hotter a miner runs, the more likely that something could go wrong.
120 asics pull huge power. no home can run that many.
all s19 do 2.7 to 3.4 kwatts
that is 300 to 400kwatts.
or 1500 to 2000 amps at 240 volts.
a home does not have a service that big.
maybe 200 amps at 240 which is 48 kwatts so may 10 to 15 asics of the s19 version
even s9 when modded do 1 kwatt a home may do 30 or so not 120
