So I have been looking around my house and putting together rigs some questions.

[philipma1957]

I have 2 sapphire nitro cards 6800xt and I have them on a simple mining rig.

I forgot settings to clock them. I run simple miner os.


Any one have some good settings I can try.

Better yet is team red the best miner for and kawpow.

tia

they are poorly clocked and doing 26+26= 52 mhs

and 200+200 watts

[Salamande]

Something isn't right for sure, as they should be about 35 mhs with 135W

Core clock: 1250
Mem clock: 1055

core volt: 675 mv
mem volt: 1300mv
MVDDCI: 800 mv

[philipma1957]

Something isn't right for sure, as they should be about 35 mhs with 135W

Core clock: 1250
Mem clock: 1055

core volt: 675 mv
mem volt: 1300mv
MVDDCI: 800 mv

thank you .  I will try them. I had these

Core clock: 1111.     now 1175
Mem clock:  975.      now 1025

core volt: 800 mv.   now 675
mem volt: 1275mv
MVDDCI: 800 mv


went from 90 to 104 for three units.

watts dropped from 200 each to

170  nitro

160 nitro

145 the msi

thanks for the help.

it is nice they make money again.

[FP91G]

For any video card there are good settings at https://hashrate.no/ depending on the coin and mining algorithm

For your video card
https://hashrate.no/gpus/6800xt
After that, I use a wattmeter to find the optimal energy consumption solution.
If you tweak it further, you can save up to 40-80 watts per mining rig.

[alecfisker]

check also termo paste in place, radiator clean, using new(upgrading) radiator added up 20% hashrate

[sp_]

You can mine KAWPOW+ZIL with the Team Black Miner with no increase in the power usage and more profit. (0.5% fee vs 2% fee in Team Red)

Team Black Miner 35MHASH kawpow+70MHASH ZIL (+0.1459 USD/day)

Note that crazypool.org has a 15% fee on zilmining. but other pools are supported with the  --zil-only parameter.

use v2.15 for the best performance

[P00P135]

You can mine KAWPOW+ZIL with the Team Black Miner with no increase in the power usage and more profit. (0.5% fee vs 2% fee in Team Red)

Team Black Miner 35MHASH kawpow+70MHASH ZIL (+0.1459 USD/day)

Note that crazypool.org has a 15% fee on zilmining. but other pools are supported with the  --zil-only parameter.

use v2.15 for the best performance

No

[FP91G]

check also termo paste in place, radiator clean, using new(upgrading) radiator added up 20% hashrate

Thermal paste must be changed during mining, but it is better to do this when the video card’s warranty has expired. The thermal paste on a warranty video card is changed when without replacing it is impossible to mine without overheating, as was the case on video cards 3080 and 3090. The 6800xt video card is not very hot, so if there is a warranty and the temperature is low, then it is better not to open the seals.

[safar1980]

I have 2 sapphire nitro cards 6800xt and I have them on a simple mining rig.

good profit BEFORE                                                                                                                                    good profit NOW

There are much fewer crises in agriculture than in mining and chicken eggs are only getting more expensive, so the profit is always stable. And mining chicken eggs does not have a negative impact on the environment, unlike cryptocurrency mining. And you will never be hungry

[Number6]

I have 2 sapphire nitro cards 6800xt and I have them on a simple mining rig.

good profit BEFORE                                                                                                                                    good profit NOW

There are much fewer crises in agriculture than in mining and chicken eggs are only getting more expensive, so the profit is always stable. And mining chicken eggs does not have a negative impact on the environment, unlike cryptocurrency mining. And you will never be hungry

Great, now the prices of chickens will go up...

[philipma1957]

made a decent amount since I first started this thread.

[ronnieb]

made a decent amount since I first started this thread.

Kawpow mining has really put new life into these cards.
Hoping for kawpow coin that can match Ethereum's past emissions

[philipma1957]

hey what works for Nvidia kawpow

I use t-rex 26.8


anything better?

[OgNasty]

hey what works for Nvidia kawpow

I use t-rex 26.8


anything better?

I use gminer.  Partly because I can run it for both my Nvidia & AMD rigs, but I did do some testing in the past that found gminer to be the best miner for my rigs.  No idea if that remains true today, but if you wanted to be pointed in the right direction of mining software to test, that's where's I'd steer you.  I've also found it to be rock solid.

When mining profitability was constantly changing between coins I used the nicehash miner and liked that it would auto-change to the most profitable chain to mine, but now that KawPow seems to be dominating pretty steadily, that's no longer necessary.

[philipma1957]

hey what works for Nvidia kawpow

I use t-rex 26.8


anything better?

I use gminer.  Partly because I can run it for both my Nvidia & AMD rigs, but I did do some testing in the past that found gminer to be the best miner for my rigs.  No idea if that remains true today, but if you wanted to be pointed in the right direction of mining software to test, that's where's I'd steer you.  I've also found it to be rock solid.

When mining profitability was constantly changing between coins I used the nicehash miner and liked that it would auto-change to the most profitable chain to mine, but now that KawPow seems to be dominating pretty steadily, that's no longer necessary.

Yeah I am doing t-rex had to reset a rig it is doing okay now.

[FP91G]

hey what works for Nvidia kawpow

I use t-rex 26.8


anything better?

If you configure your Nvidia video cards to mine this coin, then the profit will be greater than with the kawpow algorithm.
You will also really like the energy consumption when mining Gram.
https://bitcointalk.org/index.php?topic=5483750.msg63593981#msg63593981
pool https://ton.ninja
You will receive the settings when you connect your TON wallet.