Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee

[ozzy1926]

how many blocks have you guys found since free version out?

[1713267755]

1713267755

[1713267755]

1713267755

[1713267755]

1713267755

[primeGPU]

I don't know when I find the block, how to get the block! Transferred to my wallet?

Yes, it will be in your wallet. You can stop the miner and open your wallet - it'll be there.

[jgle]

I don't know when I find the block, how to get the block! Transferred to my wallet?

Yes, it will be in your wallet. You can stop the miner and open your wallet - it'll be there.

And Claymore SOLO settings are not the same as! I will try, see what good performance! Thank you very much

[jgle]

Ask a few questions: 1, CPD TIME these parameters is what mean? The better value? For example, 280X is how much?
2, the CpuUsage parameter is the "-cpuusage=X" in BAT?
3 this is the 3X280X 1150/1500 14.3
Bat: prime-gpu-so-280x.2.01 pause
Primecoin GPU miner ver. 2.01
Position
Mining time: 0.68 hours
Est. Average Chains Per Day (CPD): 3.54
Est. Spot Chains Per Day (CPD): 3.82
Pass: 925
GPU #0 time: 244
GPU #1 time: 229
GPU #2 time: 204
10-ch found: 0 expected: 0.101
Blocks found: 0 expected: 0.010
Note: Catalyst 14.3+ is required. No blocks will be found with older versions
Shown above is correct?

[primeGPU]

Ask a few questions: 1, CPD TIME these parameters is what mean? The better value? For example, 280X is how much?
2, the CpuUsage parameter is the "-cpuusage=X" in BAT?
3 this is the 3X280X 1150/1500 14.3
Bat: prime-gpu-so-280x.2.01 pause
Primecoin GPU miner ver. 2.01
Position
Mining time: 0.68 hours
Est. Average Chains Per Day (CPD): 3.54
Est. Spot Chains Per Day (CPD): 3.82
Pass: 925
GPU #0 time: 244
GPU #1 time: 229
GPU #2 time: 204
10-ch found: 0 expected: 0.101
Blocks found: 0 expected: 0.010
Note: Catalyst 14.3+ is required. No blocks will be found with older versions
Shown above is correct?

Your CPD is 1/2 of what it should be. Check you CPU usage, it should be under 60% - probably it's the bottleneck.
We will publish a new version today. Besides a 15-20% speedup, it will have support for "-cpuusage=0" command-line option that will allow the miner to run with good performance on low-end CPUs.

[gilad215]

Can i connect couple of rigs to one client/wallet?

like claymore's miner in this graph?



please share with my your bat files for couple of 280xs with pentium haswell

[primeGPU]

Can i connect couple of rigs to one client/wallet?

like claymore's miner in this graph?

We'll try to make something similar in a future version.

[primeGPU]

Version 2.02 is available:
- 15% speedup, up to 2.9 CPD on a 280x
- "-cpuusage=0" command-line option for low-end CPUs

Dowload free version:
http://primegpu.com/files/prime-gpu-free.rar

Download paid version:
http://primegpu.com/files/prime-gpu-package.zip

Edit: GPU usage is now 99%, so you may need to lower core clock a bit.

[ozzy1926]

Version 2.02 is available:
- 15% speedup, up to 2.9 CPD on a 280x
- "-cpuusage=0" command-line option for low-end CPUs

Dowload free version:
http://primegpu.com/files/prime-gpu-free.rar

Download paid version:
http://primegpu.com/files/prime-gpu-package.zip

any speed increase for 290?

[primeGPU]

any speed increase for 290?

It should be 15% for any card.

[ozzy1926]

any speed increase for 290?

It should be 15% for any card.

thanks , i am trying now

[urubu]

I have 3 different models of cards in one machine.  Is there a way to run separate server instances for each card or a way to differentiate settings for each card?  Any changes in the works for this type of situation?


Updated and did see performance increases with the update.  Thanks again!

[primeGPU]

I have 3 different models of cards in one machine.  Is there a way to run separate server instances for each card or a way to differentiate settings for each card?  Any changes in the works for this type of situation?

Earlier today I planned to include this functionallity in today's build.
Most probably it'll be included in the next one.

[urubu]

Good news! Thanks.

[SpeedDemon13]

I have 3 different models of cards in one machine.  Is there a way to run separate server instances for each card or a way to differentiate settings for each card?  Any changes in the works for this type of situation?

Earlier today I planned to include this functionallity in today's build.
Most probably it'll be included in the next one.

Will this next version have a pool option? Is the default -cpuusage=6? In the future, will there include hardware stats, ie. temp, clock speed, etc...

I get an error run the primegpu.exe and have to use the one from the v2.00 to get it working.

[primeGPU]

Will this next version have a pool option?

We have some progress in this direction, but I'm not sure about the next version.

Is the default -cpuusage=6?

Yep.

In the future, will there include hardware stats, ie. temp, clock speed, etc...

It's in the todo list, but with low priority.

I get an error run the primegpu.exe and have to use the one from the v2.00 to get it working.

What kind of an error? I was under impression that it's exactly the same file as in 2.00.

[urubu]

I get an error as well if I use the primegpu file in 2.02.  Also, CPU usage seems to be lower than previous versions at the same usage setting.

[kaleruka]

ye please add pool support with 10%  fee

[urubu]

I get an error as well if I use the primegpu file in 2.02.  Also, CPU usage seems to be lower than previous versions at the same usage setting.

Cpu usage doesn't seem to make sense

i7 4930k w/ 3x290x usage seems to be at:
15-20% at cpuusage 7 =9.4 cpd
15-20% at cpuusage 8 =9.3 cpd
95-100% at cpuusage 9 =7.5cpd

Other computer 1366 xeon w 4core/4threads with 4 gpus
cpu usage 7 =60%

[kev7112001]

the error is when u run primegpu its 0xc000007b but if i run the 1 from previous version it works the 2 arent the same as different file size