s19 k pro stopped working

[grandmaser97]

Hey guys, in need of some help, thanks in advance

Picture of Logs:
https://i.imgur.com/pkXY1dv.jpeg

This is the log when it turns on, hashrate goes to 0 and sits like that. It was on Vnish working properly for some time and then it went nuts, so i reverted back to official OS and it still doesnt go.

Second picture of logs:
https://i.imgur.com/wPiM9sA.jpeg

[BitMaxz]

That's not the way to share the logs here you need to copy the whole logs and post them here with an insert code tag.

What only I could see is that power abnormity I don't see any other issue but it's pointing to the power supply maybe we can see another issue that cause this if you can post the whole logs maybe there's another reason why it shows this issue.

For now, what I would like you to try is to unplug all the hashboards and clean all terminals including the busbar terminals, replug them all and test it again but if it doesn't work post the whole logs here.

[philipma1957]

you could open it and pull two boards fully out.

test one board

if it works one of the other two boards may be shorted.

if it does not work you may be testing the shorted board.


so pull that one board and test one of the other two 2️⃣

you end up testing all three boards one at a time.

if it never works it is likely the psu is dead. ☠️

Code:

 quote this post to see how to code a log