An (even more) optimized version of cpuminer (pooler's cpuminer, CPU-only)

[jedimstr]

Ok.... But wasn't asking about cloning the git repository and compiling. You were obviously having problems with that.  I asked if you tried:

Code:

wget http://sourceforge.net/projects/cpuminer/files/pooler-cpuminer-2.3.2-linux-x86.tar.gz

And what were you seeing when it "doesn't do it to the end like it should"?
That's what I offered to help with since you may have issues with how wget is handling the sourceforge download.

[1713567317]

1713567317

[1713567317]

1713567317

[Zen00]

Is it normal for your CPU to beep constantly while using this program, and if not, what can I do to shut it up or fix it?

[Sheldor333]

Ok.... But wasn't asking about cloning the git repository and compiling. You were obviously having problems with that.  I asked if you tried:

Code:

wget http://sourceforge.net/projects/cpuminer/files/pooler-cpuminer-2.3.2-linux-x86.tar.gz

And what were you seeing when it "doesn't do it to the end like it should"?
That's what I offered to help with since you may have issues with how wget is handling the sourceforge download.

Ok I enter:

Code:

wget http://sourceforge.net/projects/cpuminer/files/pooler-cpuminer-2.3.2-linux-x86.tar.gz
tar zxvf pooler-cpuminer-2.3.2-linux-x86.tar.gz

After last one I just get one line which says: "minerd"
Then I enter

Code:

cd pooler-cpuminer-2.3.2-linux-x86

All I get is:
-bash: cd: pooler-cpuminer-2.3.2-linux-x86: No such file or directory

That is all.

[jedimstr]

Ok.... But wasn't asking about cloning the git repository and compiling. You were obviously having problems with that.  I asked if you tried:

Code:

wget http://sourceforge.net/projects/cpuminer/files/pooler-cpuminer-2.3.2-linux-x86.tar.gz

And what were you seeing when it "doesn't do it to the end like it should"?
That's what I offered to help with since you may have issues with how wget is handling the sourceforge download.

Ok I enter:

Code:

wget http://sourceforge.net/projects/cpuminer/files/pooler-cpuminer-2.3.2-linux-x86.tar.gz
tar zxvf pooler-cpuminer-2.3.2-linux-x86.tar.gz

After last one I just get one line which says: "minerd"
Then I enter

Code:

cd pooler-cpuminer-2.3.2-linux-x86

All I get is:
-bash: cd: pooler-cpuminer-2.3.2-linux-x86: No such file or directory

That is all.

minerd is the app... that means you successfully downloaded and untar'd the file.

When you get the -bash: cd: pooler-cpuminer-2.3.2-linux-x86: No such file or directory, can you do a pwd and ls -l to show which directory you're in and the contents?  You may already be in there, so the No such file makes sense in that case.
If you are where I think you are, all you have to do is execute ./minerd --url http://whateverPool:8332 --user <me> --pass <pass> with whatever parameters you need.  

[Sheldor333]

Ok.... But wasn't asking about cloning the git repository and compiling. You were obviously having problems with that.  I asked if you tried:

Code:

wget http://sourceforge.net/projects/cpuminer/files/pooler-cpuminer-2.3.2-linux-x86.tar.gz

And what were you seeing when it "doesn't do it to the end like it should"?
That's what I offered to help with since you may have issues with how wget is handling the sourceforge download.

Ok I enter:

Code:

wget http://sourceforge.net/projects/cpuminer/files/pooler-cpuminer-2.3.2-linux-x86.tar.gz
tar zxvf pooler-cpuminer-2.3.2-linux-x86.tar.gz

After last one I just get one line which says: "minerd"
Then I enter

Code:

cd pooler-cpuminer-2.3.2-linux-x86

All I get is:
-bash: cd: pooler-cpuminer-2.3.2-linux-x86: No such file or directory

That is all.

minerd is the app... that means you successfully downloaded and untar'd the file.

When you get the -bash: cd: pooler-cpuminer-2.3.2-linux-x86: No such file or directory, can you do a pwd and ls -l to show which directory you're in and the contents?  You may already be in there, so the No such file makes sense in that case.
If you are where I think you are, all you have to do is execute ./minerd --url http://whateverPool:8332 --user <me> --pass <pass> with whatever parameters you need.  

Well when I enter pwd I get:

Code:

/root

That is normal.
When I type Is -l I get:

Code:

-rwxr-xr-x 1 1000 1000 379680 Jul 10 13:57 minerd
-rw-r--r-- 1 root root 169783 Jul 10 14:03 pooler-cpuminer-2.3.2-linux-x86.tar.gz

minerd is in gree
pooler-cpuminer-2.3.2-linux-x86.tar.gz is in red if that means anything.

Also when I enter ./minerd --url http://whateverPool:8332 --user <me> --pass <pass> I get:

Code:

-bash: ./minerd: No such file or directory

[jedimstr]

Hmm.  From the ls -l it shows you have minerd already to go so you should be all set.

Try this: chmod 777 minerd

Then try executing minerd again using your pool and username/password combo.  Don't just copy and paste the raw parameters I had above that list http://whateverPool. Those are just placeholders.  Use your own parameters for whatever pool and worker credentials you registered for.

[Sheldor333]

Still getting:
-bash: ./minerd: No such file or directory

And I do use my pool data and worker credentials. That is not a problem.

[allanlumi]

you to know that you have to repack it befor you give the next order??

I have the same thing running on 8 servers

[jedimstr]

Sheldor333 - ran it no problems testing it using what you sent me in PM... Check your messages for a screenlog/screenshot.

[mota966]

Is it possible to get stratum block information from a pool when solo mining, I know this can be done on cgminer but was wondering if the same can be done with cpuminer.
I appreciate your help.

[Sheldor333]

Sheldor333 - ran it no problems testing it using what you sent me in PM... Check your messages for a screenlog/screenshot.

This guy helped me a lot. Fixed what was bothering me. Thanks a LOT!!!

[Schleicher]

CPUminer is project of the Month at Sourceforge:
http://sourceforge.net/blog/december-2013-potm/
Congratulations.

[belskiy]

Maini want to cpu's on this pool: ru-1.litecoinpool.ru but nothing happens because of the internet, namely:
My internet connection is through a corporate proxy form: proxy.xxxxx with identifying users by username / password via http on port 8080. (in any case, so the browser works and all third-party programs, such 2GIS etc.).
All are advised to configure through mining_proxy, downloaded, tried to set up, nothing happens, the error outputs.
Not configure any known miner on cpu, through my proxy internet, I already broke my brain. Went through all the forums, nobody faced with proxies. Please help me with the settings.

[flexgroo]

hello guys, i am trying to mine a alt-coin in a pool and was told to user this program

i cant seem to figure it out, i download the one for windows 64 bit, i have win7

i extracted it to its own folder it had 4 files, i clicked on minerd to open it and it started its thing in dos... and then failed and is still failing every 30 seconds, i think i am missing a step or two, lol

like when to put in ip address, port, username, password for the pool i am trying to get in

with cgminer it gave me a prompt in dos to type those in, this doesnt let me do anything

http request failed: failed connect to 127.0.0.1:9332; no error
the error is json_rpc_call failed, retry after 30 seconds

please help i am trying to learn to mine on a windows laptop using CPU, i know it will suck and be slow and next to no hashrate, but its fun and i am learning something new...

[jedimstr]

hello guys, i am trying to mine a alt-coin in a pool and was told to user this program

i cant seem to figure it out, i download the one for windows 64 bit, i have win7

i extracted it to its own folder it had 4 files, i clicked on minerd to open it and it started its thing in dos... and then failed and is still failing every 30 seconds, i think i am missing a step or two, lol

like when to put in ip address, port, username, password for the pool i am trying to get in

with cgminer it gave me a prompt in dos to type those in, this doesnt let me do anything

http request failed: failed connect to 127.0.0.1:9332; no error
the error is json_rpc_call failed, retry after 30 seconds

please help i am trying to learn to mine on a windows laptop using CPU, i know it will suck and be slow and next to no hashrate, but its fun and i am learning something new...

Start up a separate CMD line window (you can do this from Start Button/Run and type CMD and hit enter).
Go to the directory you downloaded CPUMiner using cd c:\wherever\Folder\path.
Then type this filling in your Altcoin pool info:

Code:

minerd.exe -o http://[pool url]:[pool port] -u [username] -p [password]

[Ferris419]

I am so confused with all this mining coins stuff I cannot figure out how to connect to a pool using minerd I keep getting this.... stratum authentication failed ...retry after 30 seconds ....if some could please help me out I would highly appreciate it.

[SlidingHorn]

I am so confused with all this mining coins stuff I cannot figure out how to connect to a pool using minerd I keep getting this.... stratum authentication failed ...retry after 30 seconds ....if some could please help me out I would highly appreciate it.

Hi Ferris419

-  What coin are you mining, and from which pool?
-  Are you registered with the pool?
-  Have you set up workers at this pool?

[Ferris419]

I am so confused with all this mining coins stuff I cannot figure out how to connect to a pool using minerd I keep getting this.... stratum authentication failed ...retry after 30 seconds ....if some could please help me out I would highly appreciate it.

Hi Ferris419

-  What coin are you mining, and from which pool?
-  Are you registered with the pool?
-  Have you set up workers at this pool?

Hi I am trying to BIL coin and I have tried all the 3 pools with no avail I have setup accounts on all 3 pools and created workers on all 3 pools. I also tried to mine Lotto coin same result. the only coin ive been successful with has been mincoin.

[SlidingHorn]

Hi I am trying to BIL coin and I have tried all the 3 pools with no avail I have setup accounts on all 3 pools and created workers on all 3 pools. I also tried to mine Lotto coin same result. the only coin ive been successful with has been mincoin.

Can you either post a screenshot of what you're entering into your terminal to start cpuminer and any error messages you're receiving?

If it's not working for any of them, I think you likely have something wrong with your command

[Ferris419]

Hi I am trying to BIL coin and I have tried all the 3 pools with no avail I have setup accounts on all 3 pools and created workers on all 3 pools. I also tried to mine Lotto coin same result. the only coin ive been successful with has been mincoin.

Can you either post a screenshot of what you're entering into your terminal to start cpuminer and any error messages you're receiving?

If it's not working for any of them, I think you likely have something wrong with your command

C:\Users\justin\Desktop\pooler-cpuminer-2.3.2-win32>minerd -o stratum+tcp://jp.n
ut2pools.com:5595 -u justin -p f
[2013-12-17 14:58:43] Binding thread 0 to cpu 0
[2013-12-17 14:58:43] 2 miner threads started, using 'scrypt' algorithm.
[2013-12-17 14:58:43] Starting Stratum on stratum+tcp://jp.nut2pools.com:5595
[2013-12-17 14:58:43] Binding thread 1 to cpu 1
[2013-12-17 14:58:44] Stratum authentication failed
[2013-12-17 14:58:44] ...retry after 30 seconds