LightningAsic Gridseed Controller Firmware V3

[rammy2k2]

Waiting for reviews ...

[1713537402]

1713537402

[1713537402]

1713537402

[1713537402]

1713537402

[1713537402]

1713537402

[1713537402]

1713537402

[rammy2k2]

If i have controller from jack first miners will it work? Controller was noname than.

[maardein]

EDIT: I am not good at reading the full instructions before doing something. Sorry 

[sandor111]

Working fine for me.

Could you clarify how the general frequency vs. individual frequency works?

If I have general freq 850, can I adjust individually both higher and lower? Only the ones that haven't got a individual freq set gets the general?

If you didn't fill anything there, you should see the placeholder which explains the syntax. Basically it's MinerId=Frequency, seperated by comma's.

[rammy2k2]

If i have controller from jack first miners will it work? Controller was noname than.

[sandor111]

If i have controller from jack first miners will it work? Controller was noname than.

Should work.

[FreeJack2k2]

I've been tinkering with frequencies and I haven't observed that going very far above 850 yields much benefit. I'm seeing a little bit of an improvement at 880, but not a lot. Certainly going up to 1050 didn't give me anything (actually, no shares at all). I do like that I can now tweak individual units that underperform at higher frequencies, that's nice. I think more than anything, I'm just hopeful that the firmware delivers on the promise of not resetting the bloody things every half an hour. I have been losing so much daily hashrate because of reboots and hangs, it's not even funny.

[chanberg]

tried to upload it, and it said invalid file...

[sandor111]

tried to upload it, and it said invalid file...

Do not rename the bin files, and use Win 7 + Chrome.  

[chanberg]

tried to upload it, and it said invalid file...

Do not rename the bin files, and use Win 7 + Chrome.  

ahh... I guess having a windows machine would come in handy right now haha

[rammy2k2]

[2014-04-02 21:54:10] LTC process startup: Pid=0 Worker=rammy2k2 Frequency=850
[2014-04-02 21:54:23] New miner device(s) found: 8D7446745551 (ACM0), 8D8357825551 (ACM1), 8D8650845551 (ACM2), 8D8313745551 (ACM3), 8D8521855551 (ACM4), 8D863F795551 (ACM5), 8D8355945551 (ACM6), 8D8416685551 (ACM7), 8D7D21795551 (ACM8), 8D8A57735551 (ACM9)
[2014-04-02 21:54:24] LTC process shutdown
[2014-04-02 21:54:25] LTC process startup: Pid=0 Worker=rammy2k2 Frequency=850
[2014-04-02 21:54:37] New miner device(s) found: 8D7446745551 (ACM0), 8D8357825551 (ACM1), 8D8650845551 (ACM2), 8D8313745551 (ACM3), 8D8521855551 (ACM4), 8D863F795551 (ACM5), 8D8355945551 (ACM6), 8D8416685551 (ACM7), 8D7D21795551 (ACM8), 8D8A57735551 (ACM9)
[2014-04-02 21:54:37] LTC process shutdown
[2014-04-02 21:54:38] LTC process startup: Pid=0 Worker=rammy2k2.Frequency=850

upgrade went well, now after i inserted pool details im getting only this . whats this ?

LE : Looks like you need to insert all 3 pool details for controller to start

[sandor111]

[2014-04-02 21:54:10] LTC process startup: Pid=0 Worker=rammy2k2 Frequency=850
[2014-04-02 21:54:23] New miner device(s) found: 8D7446745551 (ACM0), 8D8357825551 (ACM1), 8D8650845551 (ACM2), 8D8313745551 (ACM3), 8D8521855551 (ACM4), 8D863F795551 (ACM5), 8D8355945551 (ACM6), 8D8416685551 (ACM7), 8D7D21795551 (ACM8), 8D8A57735551 (ACM9)
[2014-04-02 21:54:24] LTC process shutdown
[2014-04-02 21:54:25] LTC process startup: Pid=0 Worker=rammy2k2 Frequency=850
[2014-04-02 21:54:37] New miner device(s) found: 8D7446745551 (ACM0), 8D8357825551 (ACM1), 8D8650845551 (ACM2), 8D8313745551 (ACM3), 8D8521855551 (ACM4), 8D863F795551 (ACM5), 8D8355945551 (ACM6), 8D8416685551 (ACM7), 8D7D21795551 (ACM8), 8D8A57735551 (ACM9)
[2014-04-02 21:54:37] LTC process shutdown
[2014-04-02 21:54:38] LTC process startup: Pid=0 Worker=rammy2k2.Frequency=850

upgrade went well, now after i inserted pool details im getting only this . whats this ?

LE : Looks like you need to insert all 3 pool details for controller to start

Just 1 pool works fine.

[rammy2k2]

[2014-04-02 21:54:10] LTC process startup: Pid=0 Worker=rammy2k2 Frequency=850
[2014-04-02 21:54:23] New miner device(s) found: 8D7446745551 (ACM0), 8D8357825551 (ACM1), 8D8650845551 (ACM2), 8D8313745551 (ACM3), 8D8521855551 (ACM4), 8D863F795551 (ACM5), 8D8355945551 (ACM6), 8D8416685551 (ACM7), 8D7D21795551 (ACM8), 8D8A57735551 (ACM9)
[2014-04-02 21:54:24] LTC process shutdown
[2014-04-02 21:54:25] LTC process startup: Pid=0 Worker=rammy2k2 Frequency=850
[2014-04-02 21:54:37] New miner device(s) found: 8D7446745551 (ACM0), 8D8357825551 (ACM1), 8D8650845551 (ACM2), 8D8313745551 (ACM3), 8D8521855551 (ACM4), 8D863F795551 (ACM5), 8D8355945551 (ACM6), 8D8416685551 (ACM7), 8D7D21795551 (ACM8), 8D8A57735551 (ACM9)
[2014-04-02 21:54:37] LTC process shutdown
[2014-04-02 21:54:38] LTC process startup: Pid=0 Worker=rammy2k2.Frequency=850

upgrade went well, now after i inserted pool details im getting only this . whats this ?

LE : Looks like you need to insert all 3 pool details for controller to start

Just 1 pool works fine.

it didnt, i had to add 3 for the miner to start, otherwise it's just rebooting nonstop

[sandor111]

Doesn't work for me.  My 6MH/s suddenly turned into 0.3MH/s no matter which frequency/pool I use or how many times I restart them.  I strongly recommend that people do not upgrade at this time.

Which pool?

[fforforest]

Most pools dont work properly I only got ghash stable out of 9 diffrent pools. Some pools just wont work at all only rejects, and some have 50% rejects and another has 33% rejects etc. etc.

[rammy2k2]

- edited / fixed -

[sandor111]

Doesn't work for me.  My 6MH/s suddenly turned into 0.3MH/s no matter which frequency/pool I use or how many times I restart them.  I strongly recommend that people do not upgrade at this time.

Which pool?

I've tried a few different pools now.  It doesn't seem to be pool related.  Interestingly, if I only have a couple miners plugged into each hub, it seems to work.  I'm playing plugging/unplugging games right now to see how many I can get working at once.  So far I can't get more than 4 working with a single controller/hub.

It's obviously pool related, we had no problems testing with 40+ units.

[Pistachio]

I'm trying out wafflepool with 42 miners with two of these controllers. You can see stats here http://wafflepoolmonitor.com/index.php?address=12pQhAf1GSZzn1RcYp7sB9N16zVuRUU6iM. Freq set to 887.

[sandor111]

Doesn't work for me.  My 6MH/s suddenly turned into 0.3MH/s no matter which frequency/pool I use or how many times I restart them.  I strongly recommend that people do not upgrade at this time.

Which pool?

I've tried a few different pools now.  It doesn't seem to be pool related.  Interestingly, if I only have a couple miners plugged into each hub, it seems to work.  I'm playing plugging/unplugging games right now to see how many I can get working at once.  So far I can't get more than 4 working with a single controller/hub.

It's obviously pool related, we had no problems testing with 40+ units.

What pool works then?  Seems odd that I can get full speed out of 4 units, but when I plug in 10 to the hub, I get almost 0.  I would think it was power related had they not been running fine for weeks on v1.  

Miner status (hashrate: 8 Kh/s)
(miners: 11/11 uptime: 4:10, memory usage: 65%, load average: 0.41)

Same pool, same controller, same hub, but only 4 miners:

Miner status (hashrate: 1212 Kh/s)
(miners: 4/4 uptime: 1:50, memory usage: 58%, load average: 0.11)

Please PM me the pool that you are using, so I can further debug what is going on... we have tested with wafflepool, and dogehouse.

[rammy2k2]

everything looks good on me, ill come tomorrow and write whats up