Bitcoin Forum
November 18, 2026, 11:15:38 AM *
News: Latest Bitcoin Core release: 32.1 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: GMiner ASIC Firmware - Persistent installation for CVitek  (Read 948 times)
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
June 26, 2025, 09:28:25 AM
Last edit: August 12, 2026, 02:20:55 PM by Zminer777
Merited by nutildah (6)
 #1

GMiner ASIC Firmware

The firmware was developed by mining experts, developers of the popular GPU miner GMINER. We have invested all our accumulated years of experience into developing high-quality firmware that meets all modern requirements for functionality, performance and security.
This software was developed from scratch, with its own vision of the mining process and is not a rebranding or clone.

Features:
+ no penalty if commission pool is unavailable
+ one universal firmware for all supported device models
+ autotuning for selected overclocking profile
+ automatic switching overclocking profiles by temperature
+ monitoring and restoring chips performance in real time
+ manual overclocking profile adjustment, fine-tuning the frequency for each chip
+ management of list of autotuned overclocking profiles
+ automatic and manual control of cooling, target temperature, fan speed
+ watchdog for temperature sensors
+ watchdog for boards overall performance
+ watchdog for PSU voltage
+ watchdog for cooling system
+ reset, backup and restore configuration
+ support for withholding service fee
+ display of chip temperatures and power consumption
+ automatic and static network settings
+ interface languages: English, Russian
+ day and night display mode with ability to customize

Supported Hardware:
NameChip CountChipModel
T19 Pro Hyd204BM1366HHB56702
S1984 88 126BM1362BHB42801 BHB42803 BHB42811 BHB42821 BHB42831 BHB42841
S19 Pro126BM1362BHB42641 BHB42651
S19 Pro Hyd180BM1362HHB42602 HHB42701 HHB42711 TH401
S19 Pro+ Hyd180BM1362HHB42601 HHB42631
S19j+108BM1362BHB42701
S19j Pro126BM1362BHB42601 BHB42603 BHB42621 BHB42631 BHB42632
S19j Pro+120BM1362BHB42611 BHB42612
S19 XP70 99 110BM1366BHB56601 BHB56701 BHB56801 BHB56802 BHB56806
S19 XP Hyd204BM1366HHB56601 HHB56611 HHB56613 HHB56701
S19 XP+108BM1368BHB68707 BHB68709
S19 XP+ Hyd180BM1368HHB68701 HHB68703 HHB68704 H6HB68702
U3S19XP+H180BM1368H1HB68601
S19e XP Hyd204BM1366H6HB56702
U3S19EXPH204BM1366H1HB56703
S19j XP110BM1366BHB56804 BHB56807 BHB56814
S19k Pro77BM1366BHB56901 BHB56902 BHB56903 BHB56906 BHB56907
S21108BM1368BHB68601 BHB68603 BHB68606
S21 Hyd216BM1368HHB68501 HHB68502 HHB68503 HHB68504 HHB68505 HHB68601 HHB68602
T21108BM1368BHB68701 BHB68703 BHB68705
S21+55BM1370A3HB70701 A3HB70702 A3HB70703
S21++55BM1370A3HB70705 A3HB70707 A3HB70708
S21+ Hyd95BM1370H6HB70701 H6HB70702 H6HB70704
S21e Hyd85BM1370H6HB70801 H6HB70802
S21 Pro65BM1370A3HB70601 A3HB70602 A3HB70603
S21 Pro+65BM1370A3HB70605 A3HB70606 A3HB70607
S21 Pro Hyd160BM1370H6HB70601
S21 XP91BM1370A3HB70501 A3HB70502 A3HB70503
S21 XP Hyd160BM1370H6HB70501
S21e XP Hyd160BM1370H6HB70602
U3S21EXPH160BM1370H1HB70601

Supported Control Boards:
BeagleBone, Xilinx 7007, Amlogic, Cvitek

DevFee:
3%
There is special offer for a large farm, ask in telegram group

Promo Video:
https://youtu.be/NlGUB8cn_S8

Resources:
Official Website: https://gminer.pro
Github: https://github.com/develsoftware/GMinerAsicRelease
Telegram chat: https://telegram.me/gminer_asic
Telegram announcements: https://telegram.me/gminer_releases
philipma1957
Legendary
*
Offline

Activity: 5040
Merit: 12697


'The right to privacy matters'


View Profile WWW
June 26, 2025, 01:02:28 PM
 #2

3% is a very high fee.

2% is more normal

1.5% is good.


My mine is small about 2000th. it earns 110-120 usd a day before power cost



so 3% of that is $3.30. which is about $1200 a year

▄▄████████████████████▄▄
▄███████▀▀██████▀▀███████▄
█████▀██████████████▀█████
████████▄▄██████▄▄████▀███

██████████████████████████
██▄▄██████████████▄▄██████
██▀▀██████████████████▄▄██
██████▀▀██████████████▀▀██
██████████████████████████
███▄████▀▀██████▀▀████████
█████▄██████████████▄█████
▀███████▄▄██████▄▄███████▀
▀▀████████████████████▀▀
 
 DΞX.fo 
▄▄██████
█████████
██████████
██████████
██████████
█████████
▀▀██████

▄███████
▄██████████
████████████
█████████████
█████████████
|
▄▄█
▄████▀
▄███▀█▄
▄██▀█▄██
█████▀▀█
████████
████████
▀██▄████
▄████▄▄█
▄█████▀███
▄█████▀████▀
█████▀███████
▀██▀█████████
|..BTC......XMR...
..USDT.....LTC...
....Fees  0.8%.....
NotFuzzyWarm
Legendary
*
Offline

Activity: 4550
Merit: 3677


Evil beware: We have waffles!


View Profile
June 26, 2025, 02:11:29 PM
 #3

Is it a hack of cgminer or is it 100% clean code?
If it is based on cgminer, is the source code available as is required by the cgminer GPL license?

- For bitcoin to succeed the community must police itself -    My info useful? Donations welcome!  3NtFuzyWREGoDHWeMczeJzxFZpiLAFJXYr
 -Sole remaining active Primary developer of cgminer, Kano's repo is here  Discord support invite at https://kano.is/
-Support Sidehacks miner development. Donations to:   1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
June 26, 2025, 02:39:09 PM
Merited by NotFuzzyWarm (1)
 #4

Is it a hack of cgminer or is it 100% clean code?
If it is based on cgminer, is the source code available as is required by the cgminer GPL license?
GMiner is fully developed from scratch, there is no one single line from CGMiner
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
July 10, 2025, 01:45:38 PM
 #5

GMiner ASIC v1.01

+ added S19j Pro+ sub-model (BHB42612)
+ make Tooklit compatible with 32-bit architecture
+ adjusted limits for profile switching by temperature
+ seamless profile switching by temperature
+ display warning on lowering current profile by temperature
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
July 17, 2025, 08:26:30 AM
 #6

GMiner ASIC v1.02

+ added settings to configure time intervals for lowering/raising current profile by temperature
+ added additional logs for power supply failures
kano
Legendary
*
Offline

Activity: 4858
Merit: 1937


Linux since 1997 RedHat 4


View Profile
September 08, 2025, 12:25:18 AM
 #7

Is it a hack of cgminer or is it 100% clean code?
If it is based on cgminer, is the source code available as is required by the cgminer GPL license?
GMiner is fully developed from scratch, there is no one single line from CGMiner
Well considering how regularly that statement is made and how often it is a lie, unless you have the source available to check, it's almost certainly an illegal rip off.
People usually use executable compression and in file encryption to hide the truth.

Pool: https://kano.is - low 0.5% fee PPLNS 3 Days - Most reliable Solo with ONLY 0.5% fee   Bitcointalk thread: Forum
Discord support invite at https://kano.is/ Majority developer of the ckpool code - k for kano
The ONLY active original developer of cgminer. Original master git: https://github.com/kanoi/cgminer
FP91G
Legendary
*
Offline

Activity: 2562
Merit: 1753


🧙‍♂️ #kycfree


View Profile
December 23, 2025, 11:03:05 AM
 #8

GMinerAsicRelease 1.18

added chips heatmap for S21 Pro and S21 XP
added support for the S19 XP+ (BHB68707, BHB68709)
added support for the S21 XP submodel (A3HB70503)
added display of ambient temperature for Amlogic control board (S21+, S21 Pro, S21 XP)
improved compatibility with the APW121215E power supply
added toolkit statistics export to a .CSV file
added display of error/warning in the web interface page header
added support of older OS for Toolkit (Windows 7 without Direct3D 12)
decreased Toolkit executable size by 10Mb, current Toolkit size is 37Mb (offline installer with embedded firmware for all control boards)
https://github.com/develsoftware/GMinerAsicRelease/releases/tag/1.18

https://www.soleniy.com/files/manual_ru.pdf  Ru Guide

Be sure to check my links with the first post!

Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
April 14, 2026, 03:44:25 PM
 #9

GMiner ASIC v1.23

+ Added the ability to manage stock firmware from Toolkit (change pools, password, reboot the device, enable/disable blink mode). Pools can now be configured for both GMiner and Antminer firmware simultaneously.
+ Added the ability to manage GMiner firmware via the Antminer API (full support for BTC Tools, etc.). The Antminer API protocol is outdated and insecure, to activate this feature, you must enable it in the "System" section.
+ Improved GMiner API security
+ Improved compatibility with hydro models
+ Improved network scanning in Toolkit, and added an "offline" status for devices with lost connection.

Note: For compatibility with the Antminer API, the password will be reset when updating to version 1.23. The default password is "root."
FP91G
Legendary
*
Offline

Activity: 2562
Merit: 1753


🧙‍♂️ #kycfree


View Profile
May 09, 2026, 04:37:35 PM
 #10

GMiner ASIC 1.23

Added the ability to manage stock firmware from Toolkit (change pools, password, reboot the device, enable/disable blink mode). Pools can now be configured for both GMiner and Antminer firmware simultaneously.
Added the ability to manage GMiner firmware via the Antminer API (full support for BTC Tools, etc.). The Antminer API protocol is outdated and insecure, to activate this feature, you must enable it in the "System" section.
Improved GMiner API security
Improved compatibility with hydro models
Improved network scanning in Toolkit, and added an "offline" status for devices with lost connection.
Note: For compatibility with the Antminer API, the password will be reset when updating to version 1.23. The default password is "root."

https://github.com/develsoftware/GMinerAsicRelease/releases/tag/1.23

Be sure to check my links with the first post!

Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
June 10, 2026, 02:51:12 PM
 #11

GMiner v1.24

New Continuous Autotuning Algorithm

The new firmware version introduces a completely redesigned autotuning algorithm. Tuning is no longer limited to a single initial run: after the first parameter selection, the firmware continues to perform fine adjustments during mining.

This allows the miner to better adapt to changes in temperature, cooling efficiency, and other external conditions, maintaining more stable and energy-efficient operation.

Key benefits:

significant improvement in energy efficiency
automatic detection of problematic chips
adaptation to changing environmental conditions
keeping chips within the optimal stability range
precise voltage selection with 0.01 V increments
smooth tuning process with minimal additional load on the power supply
The algorithm works in two stages:

1. Initial tuning
Status: Autotuning
The firmware selects the basic optimal operating parameters for the miner.

2. Continuous fine-tuning
Status: Mining
The miner operates in normal mining mode, while the firmware continues to analyze chip performance and adjust parameters in the background.

Initial tuning usually takes approximately 1.5–3 hours.
The most noticeable effect of continuous fine-tuning appears after approximately 12 hours of operation.
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
June 20, 2026, 04:42:06 AM
 #12

GMiner ASIC v1.25

Support for installation over the latest stock firmware versions
GMiner Firmware can now be installed over stock firmware versions released from September 2025 and newer. All latest stock firmware versions currently available are supported.

Improved autotuning stability
The autotuning process has become more reliable, especially on devices with BM1366 chips, including S19k Pro and S19 XP. Autotuning is now more stable on problematic chips and better adapts to the characteristics of each individual device.

Fixed temperature sensor readings on S21 XP
An issue that could cause incorrect temperature sensor readings on S21 XP has been fixed. Temperature readings are now displayed correctly.

Reset tuned profiles from Toolkit
A new option to reset tuned profiles has been added to Toolkit. You can now quickly remove saved tuning results and start the tuning process again without manually clearing data on the device.
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
July 10, 2026, 10:25:18 AM
 #13

GMiner ASIC v1.26

* Improved autotuning for better energy efficiency, with added handling for sudden hashrate drops.
* Faster fan response to temperature changes in automatic mode.
* Expanded installation support for the latest stock firmware versions.
* Fixed installation on CV control boards running stock firmware released from September 2025 onward.
* Fixed heatmap display on Amlogic control boards for T21 and S21 miners.
* Added filters in GMiner Toolkit by the number of active hash boards and fans.
* Added support for S21 Pro+ with A3HB70605, A3HB70606, and A3HB70607 hash boards.
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
August 05, 2026, 03:26:59 PM
 #14

GMiner ASIC v1.27

+ Added a built-in task scheduler. You can now schedule profile changes, sleep mode activation, and device reboots. The scheduler runs directly in the firmware and does not require Toolkit to remain running on the same network as the devices. Schedules can be configured through the device web interface, with bulk configuration also available through Toolkit.
+ Added support for Antminer S21++ (A3HB70705, A3HB70707, and A3HB70708)
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
August 12, 2026, 02:22:07 PM
 #15

GMiner ASIC v1.28

+ Automatic startup on CVitek control boards without Toolkit. GMiner is the first publicly available custom firmware to provide this functionality. Install the firmware once, and it will automatically start with the ASIC miner, including after a reboot.
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
August 27, 2026, 10:08:02 AM
Merited by nutildah (4)
 #16

GMiner ASIC v1.29

Toolkit

* Added the ability to reflash Vnish to GMiner while preserving pools, cooling settings, performance profiles, and other settings.
* Added management support for devices running Vnish firmware: change pools and passwords, switch between search and mining modes, reboot devices, and roll back to stock firmware.
* When installing GMiner, Toolkit now applies the user-specified password if it differs from the default password.

Firmware

* Restored the minimum and maximum profile settings for the temperature tuner that were removed in version 1.27.
* Expanded the adjustment ranges for lowering and raising profiles in the temperature tuner.
* Added the ability to set separate minimum and maximum values for the random startup delay.
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
September 24, 2026, 11:19:00 AM
 #17

🚀 GMiner 1.30 — firmware and Toolkit update

⚙️ Firmware
• Added an option to automatically lower the frequency of hot chips for BM1368-based devices: T21/S21, S19XP+ and S19XP+ HYD.
• The "Performance" tab of the web interface now displays chip numbers and hardware errors.

🛠 Toolkit
• Added device sorting by temperature.
• New advanced settings tabs: "Cooling — Advanced" and "Performance — Advanced". Rarely used options were moved there: quiet mode, hashboard cooling, and the hot chip frequency reduction toggle.
• Added partnership binding in the settings for GMiner partners.

Web Interface demo: https://firmware-demo.gminer.pro/
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
October 17, 2026, 08:15:31 PM
 #18

🚀 GMiner 1.32 — firmware update

  • Web Interface: updated layout, mobile usability and quick actions.
  • Charts: history is retained across restarts, restart reasons are displayed, and 3, 6 and 12-hour periods have been added.
  • Autotuning: expanded the range from 8 to 12 higher-performance profiles.
  • Chip Tuning: bulk frequency adjustments of ±5 MHz and reset to the base frequency in manual mode, for all chips or only those within a selected stability range.
  • Power Supplies: added temperature monitoring for 11 models in the APW11, APW12 and APW17 families, with mining stopped on overheating and resumed after cooling. Resolved an issue causing voltage drops on some devices.
  • Cooling: added an option to disable PSU temperature sensor polling and overheat protection.
  • Automatic Restarts: added a configurable restart limit on error — 0–10, with a default of 3.
  • Hardware: added support for the S21+ Hydro H6HB70706 hashboard revision and APW11G1 and APW121215b power supplies.
  • Logs: downloaded as a ZIP archive containing plain-text .log files; improved viewing of large logs.
  • Temperature Sensors: improved filtering of invalid readings.


Web Interface demo: https://firmware-demo.gminer.pro/
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
November 02, 2026, 02:41:19 PM
 #19

GMiner 1.34 — firmware and Toolkit update

GMiner 1.34 is now available! Here is a combined overview of the changes since our previous announcement for version 1.32.

Firmware
  • Hashboard EEPROM tools: read EEPROM contents, save backups, write dumps from files, and restore corrupted EEPROM data directly from the web interface.
  • Temperature source selection: BM1368-based devices, including S21, T21 and S19 XP+, can now use either board sensors or built-in chip sensors for temperature control. Board sensors remain the default. When migrating from Vnish through Toolkit, chip sensors are selected automatically.
  • Autotuning improvements: improved handling of underperforming chips and expanded individual chip frequency adjustment from ±10% to ±15% of the base frequency, within hardware limits. When loading a saved profile, the firmware allows the miner to warm up and statistics to stabilize before further frequency adjustments.
  • Power supplies: added support for APW111721a.
  • Awesome Miner compatibility: corrected hashrate and hashboard temperature reporting through the CGMiner API.

Web interface
  • Chip statistics: added a switch between average and median values.
  • Tuned profiles: profiles with saved autotuning results are marked with checkmarks in all selection lists, including the scheduler.
  • Browser tab monitoring: the tab title now includes the worker name, miner model and live operating statistics or device status.
  • Settings explanations: added tooltips for performance, cooling, pools, system and network settings.
  • Clearer readings: estimated power consumption is explicitly labeled, and invalid temperature readings are excluded from summary values.
  • Diagnostics: improved log preservation and download reliability, including handling of empty logs, longer preparation times and clearer error messages.

Toolkit
  • Added device energy efficiency in J/TH, sorting by efficiency, and overall efficiency for device groups.
  • Added sorting by MAC address.
  • Improved detection of partner-branded Vnish firmware and corrected device statistics for Vnish 1.3.5 when hashboards report fractional hashrates.

Download GMiner 1.34 and Toolkit
Try the web interface demo
Telegram support and discussion
Zminer777 (OP)
Member
**
Offline

Activity: 503
Merit: 48


View Profile
Today at 10:24:28 AM
 #20

GMiner 1.35 — Firmware and Toolkit Update

  • Autotuning: Reworked hot-chip tuning on BM1368-based devices, including S21, T21, S19 XP+, and Hydro models using these chips. The temperature target is calculated across all hashboards; frequency adjustments also run during voltage tuning.
  • Liquid cooling: Added coolant temperature readings and temperature differences for each hashboard. The dashboard now features a unified cooling widget, along with coolant and maximum board temperature charts.
  • Hashrate monitoring: Low-hashrate checks now begin after the first 30 minutes of continuous mining to avoid premature warnings after startup.
  • Diagnostics: Logs now include detected hashboard details, chip numbers in temperature error messages, and warnings about communication delays with the PSU and hashboard controllers.
  • Toolkit: Added batch processing with configurable batch size and pauses between batches.
  • Default settings: BM1368-based devices now use built-in chip temperature sensors and enable hot-chip tuning by default. The default critical temperature limit for Hydro models is 80°C. These defaults apply when settings are created or reset; explicitly saved values are preserved during updates.


Official website and downloads
GMiner 1.35 release on GitHub
Web interface demo
Telegram — support and discussion
Telegram — release announcements
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!