GMiner ASIC Firmware

[Zminer777]

GMiner ASIC Firmware

The firmware was developed by mining experts, developers of the popular GPU miner GMINER. We have invested all our accumulated years of experience into developing high-quality firmware that meets all modern requirements for functionality, performance and security.
This software was developed from scratch, with its own vision of the mining process and is not a rebranding or clone.

Features:
+ no penalty if commission pool is unavailable
+ one universal firmware for all supported device models
+ autotuning for selected overclocking profile
+ automatic switching overclocking profiles by temperature
+ monitoring and restoring chips performance in real time
+ manual overclocking profile adjustment, fine-tuning the frequency for each chip
+ management of list of autotuned overclocking profiles
+ automatic and manual control of cooling, target temperature, fan speed
+ watchdog for temperature sensors
+ watchdog for boards overall performance
+ watchdog for PSU voltage
+ watchdog for cooling system
+ reset, backup and restore configuration
+ support for withholding service fee
+ display of chip temperatures and power consumption
+ automatic and static network settings
+ interface languages: English, Russian
+ day and night display mode with ability to customize

Supported Hardware:

Name	Chip Count	Chip	Model
T19 Pro Hyd	204	BM1366	HHB56702
S19	84 88 126	BM1362	BHB42801 BHB42803 BHB42811 BHB42821 BHB42831 BHB42841
S19 Pro	126	BM1362	BHB42641 BHB42651
S19 Pro Hyd	180	BM1362	HHB42602 HHB42701 HHB42711 TH401
S19 Pro+ Hyd	180	BM1362	HHB42601 HHB42631
S19j+	108	BM1362	BHB42701
S19j Pro	126	BM1362	BHB42601 BHB42603 BHB42621 BHB42631 BHB42632
S19j Pro+	120	BM1362	BHB42611 BHB42612
S19 XP	70 99 110	BM1366	BHB56601 BHB56701 BHB56801 BHB56802 BHB56806
S19 XP Hyd	204	BM1366	HHB56601 HHB56611 HHB56613 HHB56701
S19 XP+	108	BM1368	BHB68707 BHB68709
S19 XP+ Hyd	180	BM1368	HHB68701 HHB68703 HHB68704 H6HB68702
U3S19XP+H	180	BM1368	H1HB68601
S19e XP Hyd	204	BM1366	H6HB56702
U3S19EXPH	204	BM1366	H1HB56703
S19j XP	110	BM1366	BHB56804 BHB56807 BHB56814
S19k Pro	77	BM1366	BHB56901 BHB56902 BHB56903 BHB56906 BHB56907
S21	108	BM1368	BHB68601 BHB68603 BHB68606
S21 Hyd	216	BM1368	HHB68501 HHB68502 HHB68503 HHB68504 HHB68505 HHB68601 HHB68602
T21	108	BM1368	BHB68701 BHB68703 BHB68705
S21+	55	BM1370	A3HB70701 A3HB70702 A3HB70703
S21+ Hyd	95	BM1370	H6HB70701 H6HB70702 H6HB70704
S21e Hyd	85	BM1370	H6HB70801 H6HB70802
S21 Pro	65	BM1370	A3HB70601 A3HB70602 A3HB70603
S21 Pro Hyd	160	BM1370	H6HB70601
S21 XP	91	BM1370	A3HB70501 A3HB70502 A3HB70503
S21 XP Hyd	160	BM1370	H6HB70501
S21e XP Hyd	160	BM1370	H6HB70602
U3S21EXPH	160	BM1370	H1HB70601

Supported Control Boards:
BeagleBone, Xilinx 7007, Amlogic, Cvitek

DevFee:
3%
There is special offer for a large farm, ask in telegram group

Promo Video:
https://youtu.be/NlGUB8cn_S8

Resources:
Github: https://github.com/develsoftware/GMinerAsicRelease
Telegram chat: https://t.me/gminer_asic
Telegram announcements: https://t.me/gminer_releases

[philipma1957]

3% is a very high fee.

2% is more normal

1.5% is good.


My mine is small about 2000th. it earns 110-120 usd a day before power cost



so 3% of that is $3.30. which is about $1200 a year

[NotFuzzyWarm]

Is it a hack of cgminer or is it 100% clean code?
If it is based on cgminer, is the source code available as is required by the cgminer GPL license?

[Zminer777]

Is it a hack of cgminer or is it 100% clean code?
If it is based on cgminer, is the source code available as is required by the cgminer GPL license?

GMiner is fully developed from scratch, there is no one single line from CGMiner

[Zminer777]

GMiner ASIC v1.01

+ added S19j Pro+ sub-model (BHB42612)
+ make Tooklit compatible with 32-bit architecture
+ adjusted limits for profile switching by temperature
+ seamless profile switching by temperature
+ display warning on lowering current profile by temperature

[Zminer777]

GMiner ASIC v1.02

+ added settings to configure time intervals for lowering/raising current profile by temperature
+ added additional logs for power supply failures

[kano]

Is it a hack of cgminer or is it 100% clean code?
If it is based on cgminer, is the source code available as is required by the cgminer GPL license?

GMiner is fully developed from scratch, there is no one single line from CGMiner

Well considering how regularly that statement is made and how often it is a lie, unless you have the source available to check, it's almost certainly an illegal rip off.
People usually use executable compression and in file encryption to hide the truth.

[FP91G]

GMinerAsicRelease 1.18

added chips heatmap for S21 Pro and S21 XP
added support for the S19 XP+ (BHB68707, BHB68709)
added support for the S21 XP submodel (A3HB70503)
added display of ambient temperature for Amlogic control board (S21+, S21 Pro, S21 XP)
improved compatibility with the APW121215E power supply
added toolkit statistics export to a .CSV file
added display of error/warning in the web interface page header
added support of older OS for Toolkit (Windows 7 without Direct3D 12)
decreased Toolkit executable size by 10Mb, current Toolkit size is 37Mb (offline installer with embedded firmware for all control boards)
https://github.com/develsoftware/GMinerAsicRelease/releases/tag/1.18

https://www.soleniy.com/files/manual_ru.pdf  Ru Guide

Be sure to check my links with the first post!

[Zminer777]

GMiner ASIC v1.23

+ Added the ability to manage stock firmware from Toolkit (change pools, password, reboot the device, enable/disable blink mode). Pools can now be configured for both GMiner and Antminer firmware simultaneously.
+ Added the ability to manage GMiner firmware via the Antminer API (full support for BTC Tools, etc.). The Antminer API protocol is outdated and insecure, to activate this feature, you must enable it in the "System" section.
+ Improved GMiner API security
+ Improved compatibility with hydro models
+ Improved network scanning in Toolkit, and added an "offline" status for devices with lost connection.

Note: For compatibility with the Antminer API, the password will be reset when updating to version 1.23. The default password is "root."

[FP91G]

GMiner ASIC 1.23

Added the ability to manage stock firmware from Toolkit (change pools, password, reboot the device, enable/disable blink mode). Pools can now be configured for both GMiner and Antminer firmware simultaneously.
Added the ability to manage GMiner firmware via the Antminer API (full support for BTC Tools, etc.). The Antminer API protocol is outdated and insecure, to activate this feature, you must enable it in the "System" section.
Improved GMiner API security
Improved compatibility with hydro models
Improved network scanning in Toolkit, and added an "offline" status for devices with lost connection.
Note: For compatibility with the Antminer API, the password will be reset when updating to version 1.23. The default password is "root."

https://github.com/develsoftware/GMinerAsicRelease/releases/tag/1.23

Be sure to check my links with the first post!