Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
June 26, 2025, 09:28:25 AM Last edit: August 12, 2026, 02:20:55 PM by Zminer777 |
|
GMiner ASIC FirmwareThe firmware was developed by mining experts, developers of the popular GPU miner GMINER. We have invested all our accumulated years of experience into developing high-quality firmware that meets all modern requirements for functionality, performance and security. This software was developed from scratch, with its own vision of the mining process and is not a rebranding or clone. Features:+ no penalty if commission pool is unavailable + one universal firmware for all supported device models + autotuning for selected overclocking profile + automatic switching overclocking profiles by temperature + monitoring and restoring chips performance in real time + manual overclocking profile adjustment, fine-tuning the frequency for each chip + management of list of autotuned overclocking profiles + automatic and manual control of cooling, target temperature, fan speed + watchdog for temperature sensors + watchdog for boards overall performance + watchdog for PSU voltage + watchdog for cooling system + reset, backup and restore configuration + support for withholding service fee + display of chip temperatures and power consumption + automatic and static network settings + interface languages: English, Russian + day and night display mode with ability to customize Supported Hardware:| Name | Chip Count | Chip | Model | | T19 Pro Hyd | 204 | BM1366 | HHB56702 | | S19 | 84 88 126 | BM1362 | BHB42801 BHB42803 BHB42811 BHB42821 BHB42831 BHB42841 | | S19 Pro | 126 | BM1362 | BHB42641 BHB42651 | | S19 Pro Hyd | 180 | BM1362 | HHB42602 HHB42701 HHB42711 TH401 | | S19 Pro+ Hyd | 180 | BM1362 | HHB42601 HHB42631 | | S19j+ | 108 | BM1362 | BHB42701 | | S19j Pro | 126 | BM1362 | BHB42601 BHB42603 BHB42621 BHB42631 BHB42632 | | S19j Pro+ | 120 | BM1362 | BHB42611 BHB42612 | | S19 XP | 70 99 110 | BM1366 | BHB56601 BHB56701 BHB56801 BHB56802 BHB56806 | | S19 XP Hyd | 204 | BM1366 | HHB56601 HHB56611 HHB56613 HHB56701 | | S19 XP+ | 108 | BM1368 | BHB68707 BHB68709 | | S19 XP+ Hyd | 180 | BM1368 | HHB68701 HHB68703 HHB68704 H6HB68702 | | U3S19XP+H | 180 | BM1368 | H1HB68601 | | S19e XP Hyd | 204 | BM1366 | H6HB56702 | | U3S19EXPH | 204 | BM1366 | H1HB56703 | | S19j XP | 110 | BM1366 | BHB56804 BHB56807 BHB56814 | | S19k Pro | 77 | BM1366 | BHB56901 BHB56902 BHB56903 BHB56906 BHB56907 | | S21 | 108 | BM1368 | BHB68601 BHB68603 BHB68606 | | S21 Hyd | 216 | BM1368 | HHB68501 HHB68502 HHB68503 HHB68504 HHB68505 HHB68601 HHB68602 | | T21 | 108 | BM1368 | BHB68701 BHB68703 BHB68705 | | S21+ | 55 | BM1370 | A3HB70701 A3HB70702 A3HB70703 | | S21++ | 55 | BM1370 | A3HB70705 A3HB70707 A3HB70708 | | S21+ Hyd | 95 | BM1370 | H6HB70701 H6HB70702 H6HB70704 | | S21e Hyd | 85 | BM1370 | H6HB70801 H6HB70802 | | S21 Pro | 65 | BM1370 | A3HB70601 A3HB70602 A3HB70603 | | S21 Pro+ | 65 | BM1370 | A3HB70605 A3HB70606 A3HB70607 | | S21 Pro Hyd | 160 | BM1370 | H6HB70601 | | S21 XP | 91 | BM1370 | A3HB70501 A3HB70502 A3HB70503 | | S21 XP Hyd | 160 | BM1370 | H6HB70501 | | S21e XP Hyd | 160 | BM1370 | H6HB70602 | | U3S21EXPH | 160 | BM1370 | H1HB70601 | Supported Control Boards:BeagleBone, Xilinx 7007, Amlogic, Cvitek DevFee:3% There is special offer for a large farm, ask in telegram group Promo Video:https://youtu.be/NlGUB8cn_S8Resources:Official Website: https://gminer.proGithub: https://github.com/develsoftware/GMinerAsicReleaseTelegram chat: https://telegram.me/gminer_asicTelegram announcements: https://telegram.me/gminer_releases
|
|
|
|
|
philipma1957
Legendary

Activity: 5040
Merit: 12697
'The right to privacy matters'
|
 |
June 26, 2025, 01:02:28 PM |
|
3% is a very high fee.
2% is more normal
1.5% is good.
My mine is small about 2000th. it earns 110-120 usd a day before power cost
so 3% of that is $3.30. which is about $1200 a year
|
| DΞX.fo | | | | | | ▄▄██████ █████████ ██████████ ██████████ ██████████ █████████ ▀▀██████
▄███████ ▄██████████ ████████████ █████████████ █████████████ | | | | ▄▄█ ▄████▀ ▄███▀█▄ ▄██▀█▄██ █████▀▀█ ████████ ████████ ▀██▄████ ▄████▄▄█ ▄█████▀███ ▄█████▀████▀ █████▀███████ ▀██▀█████████ | | | | | ..BTC......XMR... ..USDT.....LTC... ....Fees 0.8%..... |
|
|
|
NotFuzzyWarm
Legendary

Activity: 4550
Merit: 3677
Evil beware: We have waffles!
|
 |
June 26, 2025, 02:11:29 PM |
|
Is it a hack of cgminer or is it 100% clean code? If it is based on cgminer, is the source code available as is required by the cgminer GPL license?
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
Is it a hack of cgminer or is it 100% clean code? If it is based on cgminer, is the source code available as is required by the cgminer GPL license?
GMiner is fully developed from scratch, there is no one single line from CGMiner
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
July 10, 2025, 01:45:38 PM |
|
GMiner ASIC v1.01
+ added S19j Pro+ sub-model (BHB42612) + make Tooklit compatible with 32-bit architecture + adjusted limits for profile switching by temperature + seamless profile switching by temperature + display warning on lowering current profile by temperature
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
July 17, 2025, 08:26:30 AM |
|
GMiner ASIC v1.02
+ added settings to configure time intervals for lowering/raising current profile by temperature + added additional logs for power supply failures
|
|
|
|
|
kano
Legendary

Activity: 4858
Merit: 1937
Linux since 1997 RedHat 4
|
 |
September 08, 2025, 12:25:18 AM |
|
Is it a hack of cgminer or is it 100% clean code? If it is based on cgminer, is the source code available as is required by the cgminer GPL license?
GMiner is fully developed from scratch, there is no one single line from CGMiner Well considering how regularly that statement is made and how often it is a lie, unless you have the source available to check, it's almost certainly an illegal rip off. People usually use executable compression and in file encryption to hide the truth.
|
|
|
|
FP91G
Legendary

Activity: 2562
Merit: 1753
🧙♂️ #kycfree
|
 |
December 23, 2025, 11:03:05 AM |
|
GMinerAsicRelease 1.18 added chips heatmap for S21 Pro and S21 XP added support for the S19 XP+ (BHB68707, BHB68709) added support for the S21 XP submodel (A3HB70503) added display of ambient temperature for Amlogic control board (S21+, S21 Pro, S21 XP) improved compatibility with the APW121215E power supply added toolkit statistics export to a .CSV file added display of error/warning in the web interface page header added support of older OS for Toolkit (Windows 7 without Direct3D 12) decreased Toolkit executable size by 10Mb, current Toolkit size is 37Mb (offline installer with embedded firmware for all control boards) https://github.com/develsoftware/GMinerAsicRelease/releases/tag/1.18https://www.soleniy.com/files/manual_ru.pdf Ru Guide Be sure to check my links with the first post!
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
April 14, 2026, 03:44:25 PM |
|
GMiner ASIC v1.23
+ Added the ability to manage stock firmware from Toolkit (change pools, password, reboot the device, enable/disable blink mode). Pools can now be configured for both GMiner and Antminer firmware simultaneously. + Added the ability to manage GMiner firmware via the Antminer API (full support for BTC Tools, etc.). The Antminer API protocol is outdated and insecure, to activate this feature, you must enable it in the "System" section. + Improved GMiner API security + Improved compatibility with hydro models + Improved network scanning in Toolkit, and added an "offline" status for devices with lost connection.
Note: For compatibility with the Antminer API, the password will be reset when updating to version 1.23. The default password is "root."
|
|
|
|
|
FP91G
Legendary

Activity: 2562
Merit: 1753
🧙♂️ #kycfree
|
 |
May 09, 2026, 04:37:35 PM |
|
GMiner ASIC 1.23 Added the ability to manage stock firmware from Toolkit (change pools, password, reboot the device, enable/disable blink mode). Pools can now be configured for both GMiner and Antminer firmware simultaneously. Added the ability to manage GMiner firmware via the Antminer API (full support for BTC Tools, etc.). The Antminer API protocol is outdated and insecure, to activate this feature, you must enable it in the "System" section. Improved GMiner API security Improved compatibility with hydro models Improved network scanning in Toolkit, and added an "offline" status for devices with lost connection. Note: For compatibility with the Antminer API, the password will be reset when updating to version 1.23. The default password is "root." https://github.com/develsoftware/GMinerAsicRelease/releases/tag/1.23Be sure to check my links with the first post!
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
June 10, 2026, 02:51:12 PM |
|
GMiner v1.24
New Continuous Autotuning Algorithm
The new firmware version introduces a completely redesigned autotuning algorithm. Tuning is no longer limited to a single initial run: after the first parameter selection, the firmware continues to perform fine adjustments during mining.
This allows the miner to better adapt to changes in temperature, cooling efficiency, and other external conditions, maintaining more stable and energy-efficient operation.
Key benefits:
significant improvement in energy efficiency automatic detection of problematic chips adaptation to changing environmental conditions keeping chips within the optimal stability range precise voltage selection with 0.01 V increments smooth tuning process with minimal additional load on the power supply The algorithm works in two stages:
1. Initial tuning Status: Autotuning The firmware selects the basic optimal operating parameters for the miner.
2. Continuous fine-tuning Status: Mining The miner operates in normal mining mode, while the firmware continues to analyze chip performance and adjust parameters in the background.
Initial tuning usually takes approximately 1.5–3 hours. The most noticeable effect of continuous fine-tuning appears after approximately 12 hours of operation.
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
June 20, 2026, 04:42:06 AM |
|
GMiner ASIC v1.25
Support for installation over the latest stock firmware versions GMiner Firmware can now be installed over stock firmware versions released from September 2025 and newer. All latest stock firmware versions currently available are supported.
Improved autotuning stability The autotuning process has become more reliable, especially on devices with BM1366 chips, including S19k Pro and S19 XP. Autotuning is now more stable on problematic chips and better adapts to the characteristics of each individual device.
Fixed temperature sensor readings on S21 XP An issue that could cause incorrect temperature sensor readings on S21 XP has been fixed. Temperature readings are now displayed correctly.
Reset tuned profiles from Toolkit A new option to reset tuned profiles has been added to Toolkit. You can now quickly remove saved tuning results and start the tuning process again without manually clearing data on the device.
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
July 10, 2026, 10:25:18 AM |
|
GMiner ASIC v1.26
* Improved autotuning for better energy efficiency, with added handling for sudden hashrate drops. * Faster fan response to temperature changes in automatic mode. * Expanded installation support for the latest stock firmware versions. * Fixed installation on CV control boards running stock firmware released from September 2025 onward. * Fixed heatmap display on Amlogic control boards for T21 and S21 miners. * Added filters in GMiner Toolkit by the number of active hash boards and fans. * Added support for S21 Pro+ with A3HB70605, A3HB70606, and A3HB70607 hash boards.
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
August 05, 2026, 03:26:59 PM |
|
GMiner ASIC v1.27
+ Added a built-in task scheduler. You can now schedule profile changes, sleep mode activation, and device reboots. The scheduler runs directly in the firmware and does not require Toolkit to remain running on the same network as the devices. Schedules can be configured through the device web interface, with bulk configuration also available through Toolkit. + Added support for Antminer S21++ (A3HB70705, A3HB70707, and A3HB70708)
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
August 12, 2026, 02:22:07 PM |
|
GMiner ASIC v1.28
+ Automatic startup on CVitek control boards without Toolkit. GMiner is the first publicly available custom firmware to provide this functionality. Install the firmware once, and it will automatically start with the ASIC miner, including after a reboot.
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
August 27, 2026, 10:08:02 AM |
|
GMiner ASIC v1.29
Toolkit
* Added the ability to reflash Vnish to GMiner while preserving pools, cooling settings, performance profiles, and other settings. * Added management support for devices running Vnish firmware: change pools and passwords, switch between search and mining modes, reboot devices, and roll back to stock firmware. * When installing GMiner, Toolkit now applies the user-specified password if it differs from the default password.
Firmware
* Restored the minimum and maximum profile settings for the temperature tuner that were removed in version 1.27. * Expanded the adjustment ranges for lowering and raising profiles in the temperature tuner. * Added the ability to set separate minimum and maximum values for the random startup delay.
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
September 24, 2026, 11:19:00 AM |
|
🚀 GMiner 1.30 — firmware and Toolkit update ⚙️ Firmware• Added an option to automatically lower the frequency of hot chips for BM1368-based devices: T21/S21, S19XP+ and S19XP+ HYD. • The "Performance" tab of the web interface now displays chip numbers and hardware errors. 🛠 Toolkit• Added device sorting by temperature. • New advanced settings tabs: "Cooling — Advanced" and "Performance — Advanced". Rarely used options were moved there: quiet mode, hashboard cooling, and the hot chip frequency reduction toggle. • Added partnership binding in the settings for GMiner partners. Web Interface demo: https://firmware-demo.gminer.pro/
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
October 17, 2026, 08:15:31 PM |
|
🚀 GMiner 1.32 — firmware update - Web Interface: updated layout, mobile usability and quick actions.
- Charts: history is retained across restarts, restart reasons are displayed, and 3, 6 and 12-hour periods have been added.
- Autotuning: expanded the range from 8 to 12 higher-performance profiles.
- Chip Tuning: bulk frequency adjustments of ±5 MHz and reset to the base frequency in manual mode, for all chips or only those within a selected stability range.
- Power Supplies: added temperature monitoring for 11 models in the APW11, APW12 and APW17 families, with mining stopped on overheating and resumed after cooling. Resolved an issue causing voltage drops on some devices.
- Cooling: added an option to disable PSU temperature sensor polling and overheat protection.
- Automatic Restarts: added a configurable restart limit on error — 0–10, with a default of 3.
- Hardware: added support for the S21+ Hydro H6HB70706 hashboard revision and APW11G1 and APW121215b power supplies.
- Logs: downloaded as a ZIP archive containing plain-text .log files; improved viewing of large logs.
- Temperature Sensors: improved filtering of invalid readings.
Web Interface demo: https://firmware-demo.gminer.pro/
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
November 02, 2026, 02:41:19 PM |
|
GMiner 1.34 — firmware and Toolkit updateGMiner 1.34 is now available! Here is a combined overview of the changes since our previous announcement for version 1.32. Firmware- Hashboard EEPROM tools: read EEPROM contents, save backups, write dumps from files, and restore corrupted EEPROM data directly from the web interface.
- Temperature source selection: BM1368-based devices, including S21, T21 and S19 XP+, can now use either board sensors or built-in chip sensors for temperature control. Board sensors remain the default. When migrating from Vnish through Toolkit, chip sensors are selected automatically.
- Autotuning improvements: improved handling of underperforming chips and expanded individual chip frequency adjustment from ±10% to ±15% of the base frequency, within hardware limits. When loading a saved profile, the firmware allows the miner to warm up and statistics to stabilize before further frequency adjustments.
- Power supplies: added support for APW111721a.
- Awesome Miner compatibility: corrected hashrate and hashboard temperature reporting through the CGMiner API.
Web interface- Chip statistics: added a switch between average and median values.
- Tuned profiles: profiles with saved autotuning results are marked with checkmarks in all selection lists, including the scheduler.
- Browser tab monitoring: the tab title now includes the worker name, miner model and live operating statistics or device status.
- Settings explanations: added tooltips for performance, cooling, pools, system and network settings.
- Clearer readings: estimated power consumption is explicitly labeled, and invalid temperature readings are excluded from summary values.
- Diagnostics: improved log preservation and download reliability, including handling of empty logs, longer preparation times and clearer error messages.
Toolkit- Added device energy efficiency in J/TH, sorting by efficiency, and overall efficiency for device groups.
- Added sorting by MAC address.
- Improved detection of partner-branded Vnish firmware and corrected device statistics for Vnish 1.3.5 when hashboards report fractional hashrates.
Download GMiner 1.34 and ToolkitTry the web interface demoTelegram support and discussion
|
|
|
|
|
Zminer777 (OP)
Member


Activity: 502
Merit: 48
|
 |
Today at 10:24:28 AM |
|
GMiner 1.35 — Firmware and Toolkit Update- Autotuning: Reworked hot-chip tuning on BM1368-based devices, including S21, T21, S19 XP+, and Hydro models using these chips. The temperature target is calculated across all hashboards; frequency adjustments also run during voltage tuning.
- Liquid cooling: Added coolant temperature readings and temperature differences for each hashboard. The dashboard now features a unified cooling widget, along with coolant and maximum board temperature charts.
- Hashrate monitoring: Low-hashrate checks now begin after the first 30 minutes of continuous mining to avoid premature warnings after startup.
- Diagnostics: Logs now include detected hashboard details, chip numbers in temperature error messages, and warnings about communication delays with the PSU and hashboard controllers.
- Toolkit: Added batch processing with configurable batch size and pauses between batches.
- Default settings: BM1368-based devices now use built-in chip temperature sensors and enable hot-chip tuning by default. The default critical temperature limit for Hydro models is 80°C. These defaults apply when settings are created or reset; explicitly saved values are preserved during updates.
Official website and downloadsGMiner 1.35 release on GitHubWeb interface demoTelegram — support and discussionTelegram — release announcements
|
|
|
|
|
|