For your most efficient hash rate with a crypto miner try this Hash rate finder!

[u20bf]

Use this in a calculator

put your core clocks you want to use down on paper first

calculate:

Base OR Boost (Min/Max) Divided by "4"

xx.xx times by "0.5"

xx.xx times by "0.01"

xx.xx times by "power limit 50% - 120%" you want this to be how heavy your pushing your mining. Typically at peak times you want to work the hardest.

= xxx Watts <--your wattage per Crypto Hashing Processor.

Your most efficient hash rate for the device you used!

don't worry about heat or fans ever again.

ex. for every core step is normally 10. thus every ram step is 5. in a dual channel is double. as per the wattage i don't know what core and ram draws on. lol i don't make these machines.
1773MHz ➗ 4 = 443.25 ( 4 in relation to the Cores per RAM chip per power channel)
443.25 ✖️ 0.5 = 221.625 (50% or 2 ram Chips per power channel.)
221.625 ✖️ 0.01 = 2.21615 (the power limit multiplier times 100% power boot up over time)
2.21625 ✖️ 50 = IF FOUND NO QUICK CALCULATION. Hope to see some.

110.8 Watts <--at 50% power limit in the equation is just a how hard you want to work when you mine blocks.

[dansus021]

For your most efficient hash rate with a crypto miner try this Hash rate finder! What hashrate tho? Im still confused here ?

[Laheeboo]

hwhat? 

[u20bf]

Efficiency is the ability to accomplish work with the least amount of wasted energy.

[u20bf]

For your most efficient hash rate with a crypto miner try this Hash rate finder! What hashrate tho? Im still confused here ?

Don't be. The hash rate is something you have to find with this equation. It's my hash rate finder equation. You can use it if you have watts already/ just do the backward math. Say you had 225 watts running now. that divided by 50 would get you the power limit multiplier of 4.5. divided that by 0.01 to get 450 and divide that by 0.5 to get 900 and multiply by 4 to get 3600 Mhz core clock. IF THIS CORE clock doesn't match when you are running at 225 than there's something wrong with your efficiency. THEY BOTH must match. Core Clock and watt draw after calculation.

[u20bf]

hwhat?  

try putting your hashing processor cores and ram ranking channels in the equation to see if that helps? if that doesn't help try lower the amount or power up time you are running to 50 and up the powerlimit step to 100.