KERYX (KRX) mining

[FP91G]

Free Intelligence Engine
The first BlockDAG built for decentralized AI inference. Optimistic proofs. Unstoppable intelligence.
rusty-kaspa fork: GHOSTDAG BlockDAG at 10 BPS. Memory-hard PoW to keep mining GPU-only.
https://keryx-labs.com/

Algoritm  KeryxHash

wallet
https://keryx-labs.com/wallet

miner
https://keryx-labs.com/

pool
https://keryx-labs.com/

explorer
https://keryx-labs.com/explorer

discord
https://discord.gg/U9eDmBUKTF

Major warning when mining new coins!
https://bitcointalk.org/index.php?topic=5483636

[FP91G]

Start Keryx mining on Windows

Pool link  https://baikalmine.com/pools/pplns/krx

Working miner  https://github.com/BaikalMine/krx-miner/releases/tag/v0.2.1-gpu-0.7-windows

Webwallet  https://keryx-labs.com/wallet

Be sure to check the links to the mining pool
https://baikalmine.com/pools/pplns/krx/how-to-connect

keryx-miner --keryxd-address stratum+tcp://krx.baikalmine.com:9020 --mining-address <wallet-address>
The miner has a bat file, you just need to change the wallet.

RTX 3070 usually ~40-50 MH/s depending on video card settings.

[1971ECPT]

Mined couple thousands  overnight, wallet shows 0 and some "api error", mining adress on the wallet and miner is the same and is correct.

https://postimg.cc/5YjrL0Rp

[FP91G]

Mined couple thousands  overnight, wallet shows 0 and some "api error", mining adress on the wallet and miner is the same and is correct.

https://postimg.cc/5YjrL0Rp

I've seen reviews that mining is working. If there are errors, don't worry; this is a new coin. It's best to ask about it on the project's Discord, and you'll get a quicker answer.
If there are transactions in the blockchain but the wallet has 0 coins, this is most likely a problem with the new wallet, which will be resolved soon.

[1971ECPT]

I have made a new wallet adress, it works OK now.

[safar1980]

Keryx developers rebooted the blockchain and then introduced new innovations

All coins that were mined up to this point have been reset to zero.
The start of coin mining began in April, so there are even such surprises with new coins.

[1971ECPT]

Yes but U lose all in the old wallet...

[Texacha]

My wallet gives this error:

Balance
Failed to fetch

I believe this was during maintenance period. It was announced for June 1st.

From Discord:  — 6/1/26, 12:00 PM
"🔧 Planned Maintenance — Explorer, Web Wallet & API

Hey Keryx community!
We'll be taking down the explorer, web wallet, and API for a few hours today to perform mandatory maintenance on our dedicated server (hardware upgrade).
The node itself stays up — no impact on mining or transactions.
We'll be back online as soon as possible. Thanks for your patience! "

[natan069]

Hardfork gone okay?
Its good to mine now?

[1971ECPT]

Hi, anyone knows what's happpened, why reward dropped so much? Couple days ago, I earned 1000 KRX in around 24 hours, today, with same graphic card and same hashrate, it takes 2 days to earn 1000KRX...

That's on baikal pool. I will try in suprnova too, tonight.

[FP91G]

Hi, anyone knows what's happpened, why reward dropped so much? Couple days ago, I earned 1000 KRX in around 24 hours, today, with same graphic card and same hashrate, it takes 2 days to earn 1000KRX...

That's on baikal pool. I will try in suprnova too, tonight.

There have been no changes in the coin's emission in recent days.
https://keryx-labs.com/emission
The hashrate is growing, but not so much as to reduce profit by half.
https://miningboard.com/mining/keryx/hashrate

So, we can assume that either your equipment isn't mining due to internet issues, or you need to check what's happening on the pool.
Calculate the profit on other pools.

[BeXOnE]

"Hi everyone, I started mining Keryx on my rig just 3 days ago, and I have a few questions. My setup includes a rig with 6x RTX 3080s, 1x 3060, and 1x 2080 Ti, plus a PC with an RTX 3080.

First off, in YouTube videos, I've seen quite a high hashrate from others; for me, the average for my RTX 3080s is only 28-29 MH/s, despite an OC of 1600 core / 3000 mem.

Another thing: according to the GitHub documentation, these cards fall under the none flag (TinyLlama 1.1B + DeepSeek-R1-8B, 8GB VRAM min), but on the Keryx Lab website, the flag is --light (Gemma-3-4B, 8GB+ VRAM). I tried the --light flag for a day instead of none, and honestly, I have a slight impression that the daily rewards are actually better with --light.

Also, just to add: my rig is running on HiveOS, and the PC is running Windows . I'm not pool mining; the node is on the PC, and the PC miner + Rig are just the workers.

Could someone please advise on the flags? Does anyone have more experience mining with an RTX 3080? Just in case it matters, the cards are non-LHR. And could you give me any hints regarding the hashrate?

Regards,"

[FP91G]

"Hi everyone, I started mining Keryx on my rig just 3 days ago, and I have a few questions. My setup includes a rig with 6x RTX 3080s, 1x 3060, and 1x 2080 Ti, plus a PC with an RTX 3080.

First off, in YouTube videos, I've seen quite a high hashrate from others; for me, the average for my RTX 3080s is only 28-29 MH/s, despite an OC of 1600 core / 3000 mem.

Another thing: according to the GitHub documentation, these cards fall under the none flag (TinyLlama 1.1B + DeepSeek-R1-8B, 8GB VRAM min), but on the Keryx Lab website, the flag is --light (Gemma-3-4B, 8GB+ VRAM). I tried the --light flag for a day instead of none, and honestly, I have a slight impression that the daily rewards are actually better with --light.

Also, just to add: my rig is running on HiveOS, and the PC is running Windows . I'm not pool mining; the node is on the PC, and the PC miner + Rig are just the workers.

Could someone please advise on the flags? Does anyone have more experience mining with an RTX 3080? Just in case it matters, the cards are non-LHR. And could you give me any hints regarding the hashrate?

Regards,"

LHR restricted Ethereum mining, but this protection was hacked in May 2022, likely with NVIDIA's help.
Currently, this has no effect on KERYX mining.
I'd probably choose more profitable coins for 3080
https://www.hashrate.no/gpus/3080
Change the core clock and observe the results. This algorithm is highly dependent on the core clock.

[Conqueror777]

"Hi everyone, I started mining Keryx on my rig just 3 days ago, and I have a few questions. My setup includes a rig with 6x RTX 3080s, 1x 3060, and 1x 2080 Ti, plus a PC with an RTX 3080.

First off, in YouTube videos, I've seen quite a high hashrate from others; for me, the average for my RTX 3080s is only 28-29 MH/s, despite an OC of 1600 core / 3000 mem.

Another thing: according to the GitHub documentation, these cards fall under the none flag (TinyLlama 1.1B + DeepSeek-R1-8B, 8GB VRAM min), but on the Keryx Lab website, the flag is --light (Gemma-3-4B, 8GB+ VRAM). I tried the --light flag for a day instead of none, and honestly, I have a slight impression that the daily rewards are actually better with --light.

Also, just to add: my rig is running on HiveOS, and the PC is running Windows . I'm not pool mining; the node is on the PC, and the PC miner + Rig are just the workers.

Could someone please advise on the flags? Does anyone have more experience mining with an RTX 3080? Just in case it matters, the cards are non-LHR. And could you give me any hints regarding the hashrate?

Regards,"

LHR restricted Ethereum mining, but this protection was hacked in May 2022, likely with NVIDIA's help.
Currently, this has no effect on KERYX mining.
I'd probably choose more profitable coins for 3080
https://www.hashrate.no/gpus/3080
Change the core clock and observe the results. This algorithm is highly dependent on the core clock.

Thank you for this!

[1971ECPT]

Hi, anyone knows what's happpened, why reward dropped so much? Couple days ago, I earned 1000 KRX in around 24 hours, today, with same graphic card and same hashrate, it takes 2 days to earn 1000KRX...

That's on baikal pool. I will try in suprnova too, tonight.

There have been no changes in the coin's emission in recent days.
https://keryx-labs.com/emission
The hashrate is growing, but not so much as to reduce profit by half.
https://miningboard.com/mining/keryx/hashrate

So, we can assume that either your equipment isn't mining due to internet issues, or you need to check what's happening on the pool.
Calculate the profit on other pools.

I just know 2 pools, Baikal and Suprnova. On Suprnova, reward is ok, but is dead from couple hours ago.

On Baikal, reward is worse, almost 30% lower earnings than Suprnova with same hardware on same time duration. Any known pools other that those 2? On google, nothing... Thank you!

[FP91G]

Hi, anyone knows what's happpened, why reward dropped so much? Couple days ago, I earned 1000 KRX in around 24 hours, today, with same graphic card and same hashrate, it takes 2 days to earn 1000KRX...

That's on baikal pool. I will try in suprnova too, tonight.

There have been no changes in the coin's emission in recent days.
https://keryx-labs.com/emission
The hashrate is growing, but not so much as to reduce profit by half.
https://miningboard.com/mining/keryx/hashrate

So, we can assume that either your equipment isn't mining due to internet issues, or you need to check what's happening on the pool.
Calculate the profit on other pools.

I just know 2 pools, Baikal and Suprnova. On Suprnova, reward is ok, but is dead from couple hours ago.

On Baikal, reward is worse, almost 30% lower earnings than Suprnova with same hardware on same time duration. Any known pools other that those 2? On google, nothing... Thank you!

The baikalmine pool is currently under maintenance and I couldn't find any pool statistics.
https://baikalmine.com/pools/pplns/krx/miners

In that case, you should go to Discord and search for an answer to your question there. I didn't find many pools for this coin either, but you can compare the amount of coins other miners receive.

[1971ECPT]

The baikalmine pool is currently under maintenance and I couldn't find any pool statistics.
https://baikalmine.com/pools/pplns/krx/miners

Thank you!

I didn't know about maintenance they put "maintenance" message, later.

[1971ECPT]

I forgot how to do .bat file for mining KRX on local node.

I did succesfully local node, synced, but unsucced to create .bat file.
Example I used, and no working

keryx-miner --keryxd-address stratum+tcp://127.0.0.1:22111 --mining-address keryx:qz3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.rig name

The bold part, please someone help?

[FP91G]

stratum

Code:

@echo off
keryx-miner --keryxd-address 127.0.0.1:22110 --mining-address keryx:qz3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx --worker-name rig1
pause

I always use pause to read error codes if the miner doesn't work.