Uspex Z11\Z15 Custom Firmware

[uspex_firmware]

⚡ Uspex Custom Firmware — Antminer Z11 / Z15 / Z15e
Custom firmware designed to reduce power consumption and provide individual hashboard tuning.
Dev fee: 2%
Main Features
Independent frequency and voltage control for each hashboard.
Manual tuning and ready-to-use profiles.
Automatic Stability Scan.
Hashrate chart and per-board average hashrate.
ASIC, HW/CRC error, and temperature monitoring.
Automatic rollback to the last stable settings.
Waterblock and immersion cooling support.
Stability Scan
Z11: Target of 45 kSol per board, approximately 135 kSol total.
Z15: Target of more than 140 kSol per board and more than 420 kSol total.
Z15e: Target of more than 68 kSol per board and more than 200 kSol total.
If an ASIC is lost, errors occur, or the temperature reaches 90°C, the last stable settings are restored.
📦 Firmware Downloads
Z11: Z11-Uspex.tar.gz
Z15: Z15-Uspex.zip
Z15e: Z15e-Uspex.zip
👉 Download firmware from Google Drive
https://drive.google.com/drive/folders/1a7ZXBmln9CBDmkn0aQfKOfjdsUonyUZv?usp=drive_link
💬 Support and Discussion
👉 Uspex Telegram Group
https://t.me/firmware_uspex
Development is ongoing, including bug fixes and individual ASIC control to improve performance and reduce power consumption.
Support for the Z11e/J and other Z15 variants is planned.
🙏 If you can provide remote access to a Z11e/J or another Z15 variant, it would greatly help with developing and testing new firmware.
⚠️ Results depend on the condition of the ASICs, hashboards, power supply, and cooling system. Always monitor temperatures and HW/CRC errors.

[chrysophylax]

⚡ Uspex Custom Firmware — Antminer Z11 / Z15
Custom firmware designed to reduce power consumption and provide individual hashboard tuning.
Dev fee: 2%
Main Features
Independent frequency and voltage control for each hashboard.
Manual tuning and ready-to-use profiles.
Automatic Stability Scan.
Hashrate chart and per-board average hashrate.
ASIC, HW/CRC error, and temperature monitoring.
Automatic rollback to the last stable settings.
Waterblock and immersion cooling support.
Stability Scan
Z11: Target of 45 kSol per board, approximately 135 kSol total.
Z15: Target of more than 140 kSol per board and more than 420 kSol total. All three boards are tuned in parallel. Manual voltage range: 700–800 mV in 1 mV steps.
If an ASIC is lost, errors occur, or the temperature reaches 90°C, the last stable settings are restored.
📦 Firmware Downloads
Z11: Z11-Uspex.tar.gz
Z15: Z15-Uspex.zip
👉 Download firmware from Google Drive
https://drive.google.com/drive/folders/1a7ZXBmln9CBDmkn0aQfKOfjdsUonyUZv?usp=drive_link
💬 Support and Discussion
👉 Uspex Telegram Group
https://t.me/firmware_uspex
Development is ongoing, including bug fixes and individual ASIC control to improve performance and reduce power consumption.
Support for the Z11e/J and other Z15 variants is planned.
🙏 If you can provide remote access to a Z11e/J or another Z15 variant, it would greatly help with developing and testing new firmware.
⚠️ Results depend on the condition of the ASICs, hashboards, power supply, and cooling system. Always monitor temperatures and HW/CRC errors.

Really? ...

Where are You located?

#crysx #cwi

[uspex_firmware]

⚡ Uspex Custom Firmware — Antminer Z11 / Z15
Custom firmware designed to reduce power consumption and provide individual hashboard tuning.
Dev fee: 2%
Main Features
Independent frequency and voltage control for each hashboard.
Manual tuning and ready-to-use profiles.
Automatic Stability Scan.
Hashrate chart and per-board average hashrate.
ASIC, HW/CRC error, and temperature monitoring.
Automatic rollback to the last stable settings.
Waterblock and immersion cooling support.
Stability Scan
Z11: Target of 45 kSol per board, approximately 135 kSol total.
Z15: Target of more than 140 kSol per board and more than 420 kSol total. All three boards are tuned in parallel. Manual voltage range: 700–800 mV in 1 mV steps.
If an ASIC is lost, errors occur, or the temperature reaches 90°C, the last stable settings are restored.
📦 Firmware Downloads
Z11: Z11-Uspex.tar.gz
Z15: Z15-Uspex.zip
👉 Download firmware from Google Drive
https://drive.google.com/drive/folders/1a7ZXBmln9CBDmkn0aQfKOfjdsUonyUZv?usp=drive_link
💬 Support and Discussion
👉 Uspex Telegram Group
https://t.me/firmware_uspex
Development is ongoing, including bug fixes and individual ASIC control to improve performance and reduce power consumption.
Support for the Z11e/J and other Z15 variants is planned.
🙏 If you can provide remote access to a Z11e/J or another Z15 variant, it would greatly help with developing and testing new firmware.
⚠️ Results depend on the condition of the ASICs, hashboards, power supply, and cooling system. Always monitor temperatures and HW/CRC errors.

Really? ...

Where are You located?

#crysx #cwi

What do you mean, "Where are You located?"? Message me on Telegram at @firsthe.

[chrysophylax]

⚡ Uspex Custom Firmware — Antminer Z11 / Z15
Custom firmware designed to reduce power consumption and provide individual hashboard tuning.
Dev fee: 2%
Main Features
Independent frequency and voltage control for each hashboard.
Manual tuning and ready-to-use profiles.
Automatic Stability Scan.
Hashrate chart and per-board average hashrate.
ASIC, HW/CRC error, and temperature monitoring.
Automatic rollback to the last stable settings.
Waterblock and immersion cooling support.
Stability Scan
Z11: Target of 45 kSol per board, approximately 135 kSol total.
Z15: Target of more than 140 kSol per board and more than 420 kSol total. All three boards are tuned in parallel. Manual voltage range: 700–800 mV in 1 mV steps.
If an ASIC is lost, errors occur, or the temperature reaches 90°C, the last stable settings are restored.
📦 Firmware Downloads
Z11: Z11-Uspex.tar.gz
Z15: Z15-Uspex.zip
👉 Download firmware from Google Drive
https://drive.google.com/drive/folders/1a7ZXBmln9CBDmkn0aQfKOfjdsUonyUZv?usp=drive_link
💬 Support and Discussion
👉 Uspex Telegram Group
https://t.me/firmware_uspex
Development is ongoing, including bug fixes and individual ASIC control to improve performance and reduce power consumption.
Support for the Z11e/J and other Z15 variants is planned.
🙏 If you can provide remote access to a Z11e/J or another Z15 variant, it would greatly help with developing and testing new firmware.
⚠️ Results depend on the condition of the ASICs, hashboards, power supply, and cooling system. Always monitor temperatures and HW/CRC errors.

Really? ...

Where are You located?

#crysx #cwi

What do you mean, "Where are You located?"? Message me on Telegram at @firsthe.

I mean exactly that ...

Where are You located. A LOT of dodgy 'Devs' have popped up over the years - and You being a newbie doesn't help - and disappeared doing a lot of the same stuff that some of the 'long term' developers (like EFudd and Chipless) who are still around, wiht the exception of EFudd who is now with Luxor from what I understand.

I have been looking for a FirmWare Developer for a LONG time and I have never heard of You - and I have been around since almost the Crypto beginning.

So I ask - where are You located? Some obscure island in the middle of nowhere - or a Country that has a history of solid Development?

#crysx #cwi

[uspex_firmware]

⚡ Uspex Custom Firmware — Antminer Z11 / Z15
Custom firmware designed to reduce power consumption and provide individual hashboard tuning.
Dev fee: 2%
Main Features
Independent frequency and voltage control for each hashboard.
Manual tuning and ready-to-use profiles.
Automatic Stability Scan.
Hashrate chart and per-board average hashrate.
ASIC, HW/CRC error, and temperature monitoring.
Automatic rollback to the last stable settings.
Waterblock and immersion cooling support.
Stability Scan
Z11: Target of 45 kSol per board, approximately 135 kSol total.
Z15: Target of more than 140 kSol per board and more than 420 kSol total. All three boards are tuned in parallel. Manual voltage range: 700–800 mV in 1 mV steps.
If an ASIC is lost, errors occur, or the temperature reaches 90°C, the last stable settings are restored.
📦 Firmware Downloads
Z11: Z11-Uspex.tar.gz
Z15: Z15-Uspex.zip
👉 Download firmware from Google Drive
https://drive.google.com/drive/folders/1a7ZXBmln9CBDmkn0aQfKOfjdsUonyUZv?usp=drive_link
💬 Support and Discussion
👉 Uspex Telegram Group
https://t.me/firmware_uspex
Development is ongoing, including bug fixes and individual ASIC control to improve performance and reduce power consumption.
Support for the Z11e/J and other Z15 variants is planned.
🙏 If you can provide remote access to a Z11e/J or another Z15 variant, it would greatly help with developing and testing new firmware.
⚠️ Results depend on the condition of the ASICs, hashboards, power supply, and cooling system. Always monitor temperatures and HW/CRC errors.

Really? ...

Where are You located?

#crysx #cwi

What do you mean, "Where are You located?"? Message me on Telegram at @firsthe.

I mean exactly that ...

Where are You located. A LOT of dodgy 'Devs' have popped up over the years - and You being a newbie doesn't help - and disappeared doing a lot of the same stuff that some of the 'long term' developers (like EFudd and Chipless) who are still around, wiht the exception of EFudd who is now with Luxor from what I understand.

I have been looking for a FirmWare Developer for a LONG time and I have never heard of You - and I have been around since almost the Crypto beginning.

So I ask - where are You located? Some obscure island in the middle of nowhere - or a Country that has a history of solid Development?

#crysx #cwi

I am a beginner developer; I am starting my journey and building my reputation. I am from Russia.

[chrysophylax]

⚡ Uspex Custom Firmware — Antminer Z11 / Z15
Custom firmware designed to reduce power consumption and provide individual hashboard tuning.
Dev fee: 2%
Main Features
Independent frequency and voltage control for each hashboard.
Manual tuning and ready-to-use profiles.
Automatic Stability Scan.
Hashrate chart and per-board average hashrate.
ASIC, HW/CRC error, and temperature monitoring.
Automatic rollback to the last stable settings.
Waterblock and immersion cooling support.
Stability Scan
Z11: Target of 45 kSol per board, approximately 135 kSol total.
Z15: Target of more than 140 kSol per board and more than 420 kSol total. All three boards are tuned in parallel. Manual voltage range: 700–800 mV in 1 mV steps.
If an ASIC is lost, errors occur, or the temperature reaches 90°C, the last stable settings are restored.
📦 Firmware Downloads
Z11: Z11-Uspex.tar.gz
Z15: Z15-Uspex.zip
👉 Download firmware from Google Drive
https://drive.google.com/drive/folders/1a7ZXBmln9CBDmkn0aQfKOfjdsUonyUZv?usp=drive_link
💬 Support and Discussion
👉 Uspex Telegram Group
https://t.me/firmware_uspex
Development is ongoing, including bug fixes and individual ASIC control to improve performance and reduce power consumption.
Support for the Z11e/J and other Z15 variants is planned.
🙏 If you can provide remote access to a Z11e/J or another Z15 variant, it would greatly help with developing and testing new firmware.
⚠️ Results depend on the condition of the ASICs, hashboards, power supply, and cooling system. Always monitor temperatures and HW/CRC errors.

Really? ...

Where are You located?

#crysx #cwi

What do you mean, "Where are You located?"? Message me on Telegram at @firsthe.

I mean exactly that ...

Where are You located. A LOT of dodgy 'Devs' have popped up over the years - and You being a newbie doesn't help - and disappeared doing a lot of the same stuff that some of the 'long term' developers (like EFudd and Chipless) who are still around, wiht the exception of EFudd who is now with Luxor from what I understand.

I have been looking for a FirmWare Developer for a LONG time and I have never heard of You - and I have been around since almost the Crypto beginning.

So I ask - where are You located? Some obscure island in the middle of nowhere - or a Country that has a history of solid Development?

#crysx #cwi

I am a beginner developer; I am starting my journey and building my reputation. I am from Russia.

Understood ...

So why don't You get help with this instead of hitting everyone with a 2% Developer Fee?

Even in a Private deal You could expand Your Development AND Income that way.

#crysx #cwi

[uspex_firmware]

⚡ Uspex Custom Firmware — Antminer Z11 / Z15
Custom firmware designed to reduce power consumption and provide individual hashboard tuning.
Dev fee: 2%
Main Features
Independent frequency and voltage control for each hashboard.
Manual tuning and ready-to-use profiles.
Automatic Stability Scan.
Hashrate chart and per-board average hashrate.
ASIC, HW/CRC error, and temperature monitoring.
Automatic rollback to the last stable settings.
Waterblock and immersion cooling support.
Stability Scan
Z11: Target of 45 kSol per board, approximately 135 kSol total.
Z15: Target of more than 140 kSol per board and more than 420 kSol total. All three boards are tuned in parallel. Manual voltage range: 700–800 mV in 1 mV steps.
If an ASIC is lost, errors occur, or the temperature reaches 90°C, the last stable settings are restored.
📦 Firmware Downloads
Z11: Z11-Uspex.tar.gz
Z15: Z15-Uspex.zip
👉 Download firmware from Google Drive
https://drive.google.com/drive/folders/1a7ZXBmln9CBDmkn0aQfKOfjdsUonyUZv?usp=drive_link
💬 Support and Discussion
👉 Uspex Telegram Group
https://t.me/firmware_uspex
Development is ongoing, including bug fixes and individual ASIC control to improve performance and reduce power consumption.
Support for the Z11e/J and other Z15 variants is planned.
🙏 If you can provide remote access to a Z11e/J or another Z15 variant, it would greatly help with developing and testing new firmware.
⚠️ Results depend on the condition of the ASICs, hashboards, power supply, and cooling system. Always monitor temperatures and HW/CRC errors.

Really? ...

Where are You located?

#crysx #cwi

What do you mean, "Where are You located?"? Message me on Telegram at @firsthe.

I mean exactly that ...

Where are You located. A LOT of dodgy 'Devs' have popped up over the years - and You being a newbie doesn't help - and disappeared doing a lot of the same stuff that some of the 'long term' developers (like EFudd and Chipless) who are still around, wiht the exception of EFudd who is now with Luxor from what I understand.

I have been looking for a FirmWare Developer for a LONG time and I have never heard of You - and I have been around since almost the Crypto beginning.

So I ask - where are You located? Some obscure island in the middle of nowhere - or a Country that has a history of solid Development?

#crysx #cwi

I am a beginner developer; I am starting my journey and building my reputation. I am from Russia.

Understood ...

So why don't You get help with this instead of hitting everyone with a 2% Developer Fee?

Even in a Private deal You could expand Your Development AND Income that way.

#crysx #cwi

Be more specific—I haven't received any proposals yet, but I'm willing to create firmware (even without a fee, provided I get paid for the work); I also developed firmware for the Jasminer X16Q for ETHW.

[chrysophylax]

⚡ Uspex Custom Firmware — Antminer Z11 / Z15
Custom firmware designed to reduce power consumption and provide individual hashboard tuning.
Dev fee: 2%
Main Features
Independent frequency and voltage control for each hashboard.
Manual tuning and ready-to-use profiles.
Automatic Stability Scan.
Hashrate chart and per-board average hashrate.
ASIC, HW/CRC error, and temperature monitoring.
Automatic rollback to the last stable settings.
Waterblock and immersion cooling support.
Stability Scan
Z11: Target of 45 kSol per board, approximately 135 kSol total.
Z15: Target of more than 140 kSol per board and more than 420 kSol total. All three boards are tuned in parallel. Manual voltage range: 700–800 mV in 1 mV steps.
If an ASIC is lost, errors occur, or the temperature reaches 90°C, the last stable settings are restored.
📦 Firmware Downloads
Z11: Z11-Uspex.tar.gz
Z15: Z15-Uspex.zip
👉 Download firmware from Google Drive
https://drive.google.com/drive/folders/1a7ZXBmln9CBDmkn0aQfKOfjdsUonyUZv?usp=drive_link
💬 Support and Discussion
👉 Uspex Telegram Group
https://t.me/firmware_uspex
Development is ongoing, including bug fixes and individual ASIC control to improve performance and reduce power consumption.
Support for the Z11e/J and other Z15 variants is planned.
🙏 If you can provide remote access to a Z11e/J or another Z15 variant, it would greatly help with developing and testing new firmware.
⚠️ Results depend on the condition of the ASICs, hashboards, power supply, and cooling system. Always monitor temperatures and HW/CRC errors.

Really? ...

Where are You located?

#crysx #cwi

What do you mean, "Where are You located?"? Message me on Telegram at @firsthe.

I mean exactly that ...

Where are You located. A LOT of dodgy 'Devs' have popped up over the years - and You being a newbie doesn't help - and disappeared doing a lot of the same stuff that some of the 'long term' developers (like EFudd and Chipless) who are still around, wiht the exception of EFudd who is now with Luxor from what I understand.

I have been looking for a FirmWare Developer for a LONG time and I have never heard of You - and I have been around since almost the Crypto beginning.

So I ask - where are You located? Some obscure island in the middle of nowhere - or a Country that has a history of solid Development?

#crysx #cwi

I am a beginner developer; I am starting my journey and building my reputation. I am from Russia.

Understood ...

So why don't You get help with this instead of hitting everyone with a 2% Developer Fee?

Even in a Private deal You could expand Your Development AND Income that way.

#crysx #cwi

Be more specific—I haven't received any proposals yet, but I'm willing to create firmware (even without a fee, provided I get paid for the work); I also developed firmware for the Jasminer X16Q for ETHW.

OK ...

I cannot find You om Telegram if that is easier for You to access (it is for Me).

I am ChainWorksIndustries on there.

#crysx #cwi

[uspex_firmware]

UPD add 15e