GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 17, 2014, 03:32:44 PM Last edit: February 19, 2015, 10:48:14 AM by GreekBitcoin |
|
THIS IS A VERY OLD GUIDE. DONT USE IT.
Diff has skyrocketed but fortunately pools have been developed! Pools still are not fully tested and sometimes payout must be sent manually. There are not stats for miners except their hash/s Pools are seem to work just fine and now with stratum!
If you make a new Digital ocean account try those codes for 10$ bonus.If those doesnt work try to google for DO codes: DODEPLOY ALLSSD10 lasmay
You can try the same guide not only for Digital Ocean but also for any linux pc (Ubuntu 14.04 has been tested). I will update for better miners when and if they come out. This guide uses cpuminer-multi instead of simpleminer Donations accepted : Bitcoin: 1AzpruQg4xo684n6VeqhUL8t1zskbB4Ykn Monero: 47CCXoUb7MpBYXZsjzzaeSZW5Ycv7KbCJ1n6ggumAxYv8bLjk5AcGBAWXvTRG7dKoLMGNWQp8w8kaZ1 ST4hetzCw3dwWonU 1) Please use my referral https://www.digitalocean.com/?refcode=9d68ca19e204 and create a droplet 2CPU 2GB Ram Ubuntu 14.04 64x .It must be 1GB or more. You can create up to 5 droplets. You may choose more CPUs per VM if you want of course. You just have to change the number of threads. User password and IP will be sent immediately to your email. 2) Connect with putty using using ip and password or just write those in the console that exists on DO webpage. 1 putty per droplet! You can always download putty from here http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty is better cause you can copy paste everything. For linux just ssh...: ---------------------------------------------------------------------------------------------------------------------------- sudo apt-get update sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/Lucasjones/cpuminer-multicd cpuminer-multi ./autogen.sh ./configure CFLAGS="-O3" make ---------------------------------------------------------------------------------------------------------------------------- Now cpuminer-multi has been compiled and you just have to run it. I run it with screen so that you can close putty/ssh connection and mining can keep up: Choose a pool. For example http://moneropool.org/ . All you need to type in order to start mining is: screen -S minerd ./minerd -a cryptonight --url= moneropool.com:5555 --user= yourmoneroaddress --pass=x -t 2moneropool.com:5555 is the url of the pool you want to mine yourmoneroaddress is your wallet address. 2 is the numbers of threads you want to run. 2 for 2cpu in that case. Once it starts press Ctrl A and then D so that you can detach from screen. Now you can safely close putty or console and mining will continue. When you want to check again a simple screen -r will open the mining screen. Please correct me if you find any errors or if you have any other info and please comment here for any questions! This way others can also find solution for the same problem. In case you send a PM i will answer here!
|
|
|
|
|
|
|
|
If you see garbage posts (off-topic, trolling, spam, no point, etc.), use the "report to moderator" links. All reports are investigated, though you will rarely be contacted about your reports.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
aloney
|
|
May 17, 2014, 03:52:43 PM |
|
it seems that there's some problem with this miner, after accept some shares , then it chould find nothing with a really low hasreate, do you have the same problem
|
PPL:XunifRT3qvqnPi8kQ2PyLSSejHrSnUTHtX
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 17, 2014, 03:57:06 PM |
|
it seems that there's some problem with this miner, after accept some shares , then it chould find nothing with a really low hasreate, do you have the same problem
hmm i am not sure. Let me monitor it for a while. I am getting another error for now.
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 17, 2014, 04:01:35 PM |
|
it seems that there's some problem with this miner, after accept some shares , then it chould find nothing with a really low hasreate, do you have the same problem
Actually i got a share after a while. So it seems that this works. For me the problem is the cant call rpc command error...
|
|
|
|
carloss
Member
Offline
Activity: 64
Merit: 10
|
|
May 18, 2014, 08:53:42 PM Last edit: May 18, 2014, 09:33:48 PM by carloss |
|
With moneropool.org it is acting really weird. Most of the time I get something like 95% rejects: carloss@carlossNvMiner:~$ ./minermonero.sh [2014-05-18 22:44:14] Using JSON-RPC 2.0 [2014-05-18 22:44:14] 5 miner threads started, using 'cryptonight' algorithm. [2014-05-18 22:44:14] Long-polling activated for http://mine.moneropool.org:5555/ [2014-05-18 22:44:14] [JSON-RPC] diff set to 2500 [2014-05-18 22:44:27] thread 0: 66 hashes, 18.34 H/s [2014-05-18 22:44:27] thread 4: 66 hashes, 18.24 H/s [2014-05-18 22:44:27] thread 2: 66 hashes, 18.06 H/s [2014-05-18 22:44:27] thread 3: 66 hashes, 17.88 H/s [2014-05-18 22:44:27] thread 1: 66 hashes, 17.83 H/s [2014-05-18 22:45:08] thread 2: 752 hashes, 18.15 H/s [2014-05-18 22:45:10] accepted: 0/1 (0.00%), 90.42 H/s at diff 0 (booooo) [2014-05-18 22:45:22] thread 3: 1003 hashes, 18.20 H/s [2014-05-18 22:45:22] thread 1: 1000 hashes, 18.07 H/s [2014-05-18 22:45:23] thread 4: 1023 hashes, 18.12 H/s [2014-05-18 22:45:24] thread 0: 1028 hashes, 18.02 H/s [2014-05-18 22:45:24] thread 0: 3 hashes, 17.31 H/s [2014-05-18 22:45:24] thread 0: 3 hashes, 18.15 H/s [2014-05-18 22:45:24] thread 0: 3 hashes, 18.49 H/s [2014-05-18 22:45:24] thread 0: 3 hashes, 18.43 H/s [2014-05-18 22:45:25] thread 0: 3 hashes, 18.52 H/s [2014-05-18 22:45:26] accepted: 0/2 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:26] accepted: 0/3 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:27] accepted: 0/4 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:27] accepted: 0/5 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:27] accepted: 0/6 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:29] LONGPOLL detected new block Same issue with extremepool.org. With moneropool.com it seems to work fine. Maybe pool software incompatibility? Or latency issue (I am in Europe)? Edit: moneropool.com suffers of another problem - incorrect diff retargeting
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 18, 2014, 09:01:04 PM |
|
With moneropool.org it is acting really weird. Most of the time I get something like 95% rejects: carloss@carlossNvMiner:~$ ./minermonero.sh [2014-05-18 22:44:14] Using JSON-RPC 2.0 [2014-05-18 22:44:14] 5 miner threads started, using 'cryptonight' algorithm. [2014-05-18 22:44:14] Long-polling activated for http://mine.moneropool.org:5555/ [2014-05-18 22:44:14] [JSON-RPC] diff set to 2500 [2014-05-18 22:44:27] thread 0: 66 hashes, 18.34 H/s [2014-05-18 22:44:27] thread 4: 66 hashes, 18.24 H/s [2014-05-18 22:44:27] thread 2: 66 hashes, 18.06 H/s [2014-05-18 22:44:27] thread 3: 66 hashes, 17.88 H/s [2014-05-18 22:44:27] thread 1: 66 hashes, 17.83 H/s [2014-05-18 22:45:08] thread 2: 752 hashes, 18.15 H/s [2014-05-18 22:45:10] accepted: 0/1 (0.00%), 90.42 H/s at diff 0 (booooo) [2014-05-18 22:45:22] thread 3: 1003 hashes, 18.20 H/s [2014-05-18 22:45:22] thread 1: 1000 hashes, 18.07 H/s [2014-05-18 22:45:23] thread 4: 1023 hashes, 18.12 H/s [2014-05-18 22:45:24] thread 0: 1028 hashes, 18.02 H/s [2014-05-18 22:45:24] thread 0: 3 hashes, 17.31 H/s [2014-05-18 22:45:24] thread 0: 3 hashes, 18.15 H/s [2014-05-18 22:45:24] thread 0: 3 hashes, 18.49 H/s [2014-05-18 22:45:24] thread 0: 3 hashes, 18.43 H/s [2014-05-18 22:45:25] thread 0: 3 hashes, 18.52 H/s [2014-05-18 22:45:26] accepted: 0/2 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:26] accepted: 0/3 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:27] accepted: 0/4 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:27] accepted: 0/5 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:27] accepted: 0/6 (0.00%), 91.05 H/s at diff 0 (booooo) [2014-05-18 22:45:29] LONGPOLL detected new block Same issue with extremepool.org. With moneropool.com it seems to work fine. Maybe pool software incompatibility? Or latency issue (I am in Europe)? Some of my VMs keep working fine. On some i get the same as you. I dont know but i think it is something with the pools. I am mining on moneropool.com right now because on other pools after some time my hash was going to zero. Actually its a bug with longpooling it seems... But for now i dont know any fix... Oh btw did you compiled the new cpuminer-multi? it had some changes from yesterday.
|
|
|
|
carloss
Member
Offline
Activity: 64
Merit: 10
|
|
May 18, 2014, 09:28:05 PM |
|
Some of my VMs keep working fine. On some i get the same as you. I dont know but i think it is something with the pools. I am mining on moneropool.com right now because on other pools after some time my hash was going to zero.
Actually its a bug with longpooling it seems... But for now i dont know any fix...
Oh btw did you compiled the new cpuminer-multi? it had some changes from yesterday.
Yes, compiled fresh version this evening. The long-polling bugfix commit included.
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 19, 2014, 01:40:12 PM Last edit: May 19, 2014, 02:12:18 PM by GreekBitcoin |
|
Ok generally speaking you can mine right now with the guide. Remember to compile new miner. It has been updated yesterday.
There are bugs. After some time you may not find valid shares. Try to close it and run it again or change pool.
Edit: The bug is on the pool side. Devs decided to implement stratum to fix the problem.
|
|
|
|
o3u
Sr. Member
Offline
Activity: 393
Merit: 250
Money comes, money goes
|
|
May 19, 2014, 07:21:00 PM |
|
any stats on how profitable different CPUs are?
|
|
|
|
carloss
Member
Offline
Activity: 64
Merit: 10
|
|
May 20, 2014, 12:36:01 PM |
|
The current version of cpuminer-multi seems to work fine with current moneropool.com since today. Running for few hours and still getting valid shares. The share diff oscillates between 9000 and 10000. I will keep monitoring it.
|
|
|
|
forevernoob
|
|
May 20, 2014, 02:59:20 PM |
|
Hey Greek, could you make a guide on how to install the wallet on Ubuntu/Debian? Specifically compiling this wallet: https://github.com/monero-project/bitmoneroOr is it possible to mine directly to an exchange? I think not since they require a payment ID.
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 20, 2014, 05:39:19 PM |
|
any stats on how profitable different CPUs are?
I dont think something exists. Maybe somewhere around the topic some people have posted. Hey Greek, could you make a guide on how to install the wallet on Ubuntu/Debian? Specifically compiling this wallet: https://github.com/monero-project/bitmoneroOr is it possible to mine directly to an exchange? I think not since they require a payment ID. There is this one line install on monero.cc. However i when you try to compile it it wont work because of different CPUs in digital ocean. This can be fixed easily by compiling for corei7. But when i tried i got an error about virtual memory that i didnt bypass. I was using 2GB RAM though and maybe with bigger it will eventually compile. Also i wouldnt mine directly to an exchange! cd ~ && rm install_monero.sh && wget https://ottrbutt.com/monero/install_monero.sh && bash install_monero.sh
|
|
|
|
forevernoob
|
|
May 20, 2014, 07:10:26 PM |
|
There is this one line install on monero.cc. However i when you try to compile it it wont work because of different CPUs in digital ocean. This can be fixed easily by compiling for corei7. But when i tried i got an error about virtual memory that i didnt bypass. I was using 2GB RAM though and maybe with bigger it will eventually compile. Also i wouldnt mine directly to an exchange! cd ~ && rm install_monero.sh && wget https://ottrbutt.com/monero/install_monero.sh && bash install_monero.sh Yeah I got the same thing on my VPS running that script. When I run it on another PC it got through that part. But cmake still complains about boost not being the correct version. Have you tried getting the simplewallet to work? It's a binary so you don't have to compile it. Unfortunately I cannot get to run either.
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 21, 2014, 01:21:33 AM |
|
There is this one line install on monero.cc. However i when you try to compile it it wont work because of different CPUs in digital ocean. This can be fixed easily by compiling for corei7. But when i tried i got an error about virtual memory that i didnt bypass. I was using 2GB RAM though and maybe with bigger it will eventually compile. Also i wouldnt mine directly to an exchange! cd ~ && rm install_monero.sh && wget https://ottrbutt.com/monero/install_monero.sh && bash install_monero.sh Yeah I got the same thing on my VPS running that script. When I run it on another PC it got through that part. But cmake still complains about boost not being the correct version. Have you tried getting the simplewallet to work? It's a binary so you don't have to compile it. Unfortunately I cannot get to run either. No i havent. Maybe i will try tomorrow. What problem do you have with it?
|
|
|
|
forevernoob
|
|
May 21, 2014, 12:15:22 PM |
|
No i havent. Maybe i will try tomorrow. What problem do you have with it?
I get "Illegal instruction" after generating a wallet. If you do get any wallet to work on Linux I would be very glad if you explained how...
|
|
|
|
orinoco
Member
Offline
Activity: 81
Merit: 10
<3 big picture
|
|
May 22, 2014, 03:11:58 PM |
|
Edit: moneropool.com suffers of another problem - incorrect diff retargeting
This is the problem I've been having - it will mine just fine, and diff will increase, then for no reason, difficulty will retarget back to the pool base value and stay there, and all I get are rejects ("booooo"). I even set up my own pool at home just to have a play with the parameters.. pretty sure its a problem with the pool, but I'm not familiar with node.js. Will be pulling any updates ot the pull software and testing tho' -but for now I'm using simpleminer again.
|
|
|
|
rapeghost
|
|
May 23, 2014, 01:06:41 AM |
|
Hi.
[2014-05-23 01:58:55] thread 24: 61 hashes, 11.82 H/s [2014-05-23 01:58:55] accepted: 8/8 (100.00%), 375.62 H/s at diff 2000 (yay!!!)
Just disable longpolling.
[2014-05-23 01:59:52] accepted: 21/21 (100.00%), 382.44 H/s at diff 4000 (yay!!!)
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 23, 2014, 09:46:34 PM |
|
No i havent. Maybe i will try tomorrow. What problem do you have with it?
I get "Illegal instruction" after generating a wallet. If you do get any wallet to work on Linux I would be very glad if you explained how... With my VM's, wallet is working fine. I get also errors with DO's VMs...
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 25, 2014, 09:06:34 PM |
|
Pools are working fine and now with stratum too.
Added some codes for digital ocean bonus.
I will add more pools soon...
|
|
|
|
coinesque
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 26, 2014, 02:32:39 AM |
|
Any information on why we should be using the HTTP port rather than the TCP ones?
|
|
|
|
forevernoob
|
|
May 27, 2014, 02:28:20 PM |
|
Pools are working fine and now with stratum too.
Added some codes for digital ocean bonus.
I will add more pools soon...
Stratum gives performance boost according to the pool I use. Maybe you should edit the OP and change the command line?
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 27, 2014, 04:07:30 PM |
|
Pools are working fine and now with stratum too.
Added some codes for digital ocean bonus.
I will add more pools soon...
Stratum gives performance boost according to the pool I use. Maybe you should edit the OP and change the command line? Yes i will do! I dont have much spare time! I will do it today or tomorrow for sure!
|
|
|
|
Broseph Stalin
Member
Offline
Activity: 65
Merit: 10
|
|
May 29, 2014, 07:34:05 AM |
|
Any comment on this email from DO support? I've never used a VPS for mining before so I don't know how accurate their statement is:
"Please understand that due to the nature of cloud computing, mining even CPU currencies is rather inefficient- simply due to how virtualization makes use of the CPU cycles."
Just how inefficient is it, and what is the purpose of using DO for CPU mining? Is it to just have more computing power over what you can get at home? How does it compare to just mining on Windows at home?
|
|
|
|
tjc
|
|
May 30, 2014, 12:33:58 AM |
|
Anyone get this to work on a Azure instance of Ubuntu? I can do it fine on Digital Ocean but get "Illegal instruction (core dumped)" with my Azure instance. "
|
|
|
|
tjc
|
|
May 30, 2014, 12:52:46 AM |
|
Anyone get this to work on a Azure instance of Ubuntu? I can do it fine on Digital Ocean but get "Illegal instruction (core dumped)" with my Azure instance. "
Nevermind - I got it to work with this sequence. sudo apt-get update sudo apt-get install git make automake screen libcurl4-openssl-dev gcc build-essential git clone https://github.com/Lucasjones/cpuminer-multicd cpuminer-multi ./autogen.sh ./configure CFLAGS="-O3" make screen -S minerd ./minerd -a cryptonight -o stratum+tcp://mine.moneropool.com:3333 -u -p x -t 1
|
|
|
|
guitarplinker
Legendary
Offline
Activity: 1694
Merit: 1024
|
|
June 14, 2014, 02:42:20 PM |
|
Sorry for bumping an older thread, but thanks for the tutorial! I have it up and running with a DigitalOcean droplet.
|
|
|
|
forevernoob
|
|
June 14, 2014, 05:02:05 PM |
|
There is a ton of new CPU miners out for cryptonight now. Do you recommend switching from lucasjones? I have a CPU from 2011.
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
June 14, 2014, 05:39:47 PM |
|
No i am sorry. I reccomend wolfs CPU miner right now. I MUST update everything but i dont have time...but i must...I will do it asap...
|
|
|
|
ibuyltc
|
|
June 16, 2014, 02:11:33 PM |
|
Im using this with microsoft azure. Works flawlessly. Thanks!
I'll tip you later since im off to work
|
|
|
|
Brewins
Legendary
Offline
Activity: 1120
Merit: 1000
|
|
June 16, 2014, 05:11:28 PM |
|
Heres a one liner if anyone wants to make a droplet MRO ready in seconds sudo apt-get update ; sudo apt-get install -y git make automake screen libcurl4-openssl-dev ; git clone https://github.com/LucasJones/cpuminer-multi ; cd cpuminer-multi ; ./autogen.sh ; ./configure CFLAGS="-O3" ; make -j 2 ; screen
|
|
|
|
cyber-machine
Newbie
Offline
Activity: 19
Merit: 0
|
|
June 24, 2014, 08:19:41 PM |
|
I can't begin digitalocean mining. My settings not work. Pls. help me I need install minergate console miner from off. site https://minergate.com/articles/cpuminer to Ubuntu 13.10 x64 I type in PUTTY: sudo apt-get update sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/ekimmo/cpuminer-multi cd cpuminer-multi ./autogen.sh ./configure CFLAGS="-O3" make screen -S minerd ./minerd -a cryptonight -o http://fcn-duck.pool.minergate.com:5563 --user=x@mail.com --pass=x -t 1 but mining not started Pls. tell me the right settings
|
|
|
|
forevernoob
|
|
June 24, 2014, 11:09:21 PM |
|
I can't begin digitalocean mining. My settings not work. Pls. help me I need install minergate console miner from off. site https://minergate.com/articles/cpuminer to Ubuntu 13.10 x64 I type in PUTTY: sudo apt-get update sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/ekimmo/cpuminer-multi cd cpuminer-multi ./autogen.sh ./configure CFLAGS="-O3" make screen -S minerd ./minerd -a cryptonight -o http://fcn-duck.pool.minergate.com:5563 --user=x@mail.com --pass=x -t 1 but mining not started Pls. tell me the right settings What error message does it give?
|
|
|
|
cyber-machine
Newbie
Offline
Activity: 19
Merit: 0
|
|
June 25, 2014, 12:57:57 AM |
|
I can't begin digitalocean mining. My settings not work. Pls. help me I need install minergate console miner from off. site https://minergate.com/articles/cpuminer to Ubuntu 13.10 x64 I type in PUTTY: sudo apt-get update sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/ekimmo/cpuminer-multi cd cpuminer-multi ./autogen.sh ./configure CFLAGS="-O3" make screen -S minerd ./minerd -a cryptonight -o http://fcn-duck.pool.minergate.com:5563 --user=x@mail.com --pass=x -t 1 but mining not started Pls. tell me the right settings What error message does it give? Does not give any error message. Connection begins with pool and frozen at this
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
June 25, 2014, 01:04:31 AM |
|
I have a feeling its because you try to merge mine with FCN and i thing it isnt supported by the miner...
Try this duck.pool.minergate.com:5562 and see if it works
|
|
|
|
trand
Full Member
Offline
Activity: 252
Merit: 100
Streamity Decentralized cryptocurrency exchange
|
|
June 25, 2014, 02:17:48 AM |
|
I can't begin digitalocean mining. My settings not work. Pls. help me I need install minergate console miner from off. site https://minergate.com/articles/cpuminer to Ubuntu 13.10 x64 I type in PUTTY: sudo apt-get update sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/ekimmo/cpuminer-multi cd cpuminer-multi ./autogen.sh ./configure CFLAGS="-O3" make screen -S minerd ./minerd -a cryptonight -o http://fcn-duck.pool.minergate.com:5563 --user=x@mail.com --pass=x -t 1 but mining not started Pls. tell me the right settings What error message does it give? Does not give any error message. Connection begins with pool and frozen at this wait a min, after you input sudo command your VPS process it? or try to see your folder ar they have cpumining folder or not type ls on your root directory and see whether they are cpumining folder
|
|
|
|
cyber-machine
Newbie
Offline
Activity: 19
Merit: 0
|
|
June 25, 2014, 02:58:15 AM |
|
After input sudo command and all commands VPS process go. also with Lucasjones cpuminer (git clone https://github.com/Lucasjones/cpuminer-multi) mining work, but speed very not stable. Others pool startum with this command working perfect, problems only with minergate pool.
|
|
|
|
Molet
Newbie
Offline
Activity: 8
Merit: 0
|
|
February 19, 2015, 10:00:22 AM |
|
sudo apt-get update sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/Lucasjones/cpuminer-multicd cpuminer-multi ./autogen.sh ./configure CFLAGS="-O3" make ---------------------------------------------------------------------------------------------------------------------------- After the command " make" error root@debian:/home/miner_user/cpuminer-multi# make make all-recursive make[1]: Entering directory `/home/miner_user/cpuminer-multi' Making all in compat make[2]: Entering directory `/home/miner_user/cpuminer-multi/compat' Making all in jansson make[3]: Entering directory `/home/miner_user/cpuminer-multi/compat/jansson' gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT dump.o -MD -MP -MF .deps/dump.Tpo -c -o dump.o dump.c mv -f .deps/dump.Tpo .deps/dump.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT hashtable.o -MD -MP -MF .deps/hashtable.Tpo -c -o hashtable.o hashtable.c mv -f .deps/hashtable.Tpo .deps/hashtable.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT load.o -MD -MP -MF .deps/load.Tpo -c -o load.o load.c mv -f .deps/load.Tpo .deps/load.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT strbuffer.o -MD -MP -MF .deps/strbuffer.Tpo -c -o strbuffer.o strbuffer.c mv -f .deps/strbuffer.Tpo .deps/strbuffer.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT utf.o -MD -MP -MF .deps/utf.Tpo -c -o utf.o utf.c mv -f .deps/utf.Tpo .deps/utf.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT value.o -MD -MP -MF .deps/value.Tpo -c -o value.o value.c mv -f .deps/value.Tpo .deps/value.Po rm -f libjansson.a ar cru libjansson.a dump.o hashtable.o load.o strbuffer.o utf.o value.o ranlib libjansson.a make[3]: Leaving directory `/home/miner_user/cpuminer-multi/compat/jansson' make[3]: Entering directory `/home/miner_user/cpuminer-multi/compat' make[3]: Цeль `all-am' нe тpeбyeт выпoлнeния кoмaнд. make[3]: Leaving directory `/home/miner_user/cpuminer-multi/compat' make[2]: Leaving directory `/home/miner_user/cpuminer-multi/compat' make[2]: Entering directory `/home/miner_user/cpuminer-multi' gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -falign-loops=16 -falign-functions=16 -falign-jumps=16 -maes -O3 -MT minerd-cpu-miner.o -MD -MP -MF .deps/minerd-cpu-miner.Tpo -c -o minerd-cpu-miner.o `test -f 'cpu-miner.c' || echo './'`cpu-miner.c cc1: error: invalid option argument ‘-Ofast’ cc1: error: unrecognized command line option "-flto" cc1: error: unrecognized command line option "-fuse-linker-plugin" cc1: error: unrecognized command line option "-ftree-loop-if-convert-stores" make[2]: *** [minerd-cpu-miner.o] error 1 make[2]: Leaving directory `/home/miner_user/cpuminer-multi' make[1]: *** [all-recursive] error 1 make[1]: Leaving directory `/home/miner_user/cpuminer-multi' make: *** [all] error 2 my system Distributor ID: Debian Description: Debian GNU/Linux 6.0.10 (squeeze) Release: 6.0.10 Codename: squeeze
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
February 19, 2015, 10:50:23 AM |
|
sudo apt-get update sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/Lucasjones/cpuminer-multicd cpuminer-multi ./autogen.sh ./configure CFLAGS="-O3" make ---------------------------------------------------------------------------------------------------------------------------- After the command " make" error root@debian:/home/miner_user/cpuminer-multi# make make all-recursive make[1]: Entering directory `/home/miner_user/cpuminer-multi' Making all in compat make[2]: Entering directory `/home/miner_user/cpuminer-multi/compat' Making all in jansson make[3]: Entering directory `/home/miner_user/cpuminer-multi/compat/jansson' gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT dump.o -MD -MP -MF .deps/dump.Tpo -c -o dump.o dump.c mv -f .deps/dump.Tpo .deps/dump.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT hashtable.o -MD -MP -MF .deps/hashtable.Tpo -c -o hashtable.o hashtable.c mv -f .deps/hashtable.Tpo .deps/hashtable.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT load.o -MD -MP -MF .deps/load.Tpo -c -o load.o load.c mv -f .deps/load.Tpo .deps/load.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT strbuffer.o -MD -MP -MF .deps/strbuffer.Tpo -c -o strbuffer.o strbuffer.c mv -f .deps/strbuffer.Tpo .deps/strbuffer.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT utf.o -MD -MP -MF .deps/utf.Tpo -c -o utf.o utf.c mv -f .deps/utf.Tpo .deps/utf.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT value.o -MD -MP -MF .deps/value.Tpo -c -o value.o value.c mv -f .deps/value.Tpo .deps/value.Po rm -f libjansson.a ar cru libjansson.a dump.o hashtable.o load.o strbuffer.o utf.o value.o ranlib libjansson.a make[3]: Leaving directory `/home/miner_user/cpuminer-multi/compat/jansson' make[3]: Entering directory `/home/miner_user/cpuminer-multi/compat' make[3]: Цeль `all-am' нe тpeбyeт выпoлнeния кoмaнд. make[3]: Leaving directory `/home/miner_user/cpuminer-multi/compat' make[2]: Leaving directory `/home/miner_user/cpuminer-multi/compat' make[2]: Entering directory `/home/miner_user/cpuminer-multi' gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -falign-loops=16 -falign-functions=16 -falign-jumps=16 -maes -O3 -MT minerd-cpu-miner.o -MD -MP -MF .deps/minerd-cpu-miner.Tpo -c -o minerd-cpu-miner.o `test -f 'cpu-miner.c' || echo './'`cpu-miner.c cc1: error: invalid option argument ‘-Ofast’ cc1: error: unrecognized command line option "-flto" cc1: error: unrecognized command line option "-fuse-linker-plugin" cc1: error: unrecognized command line option "-ftree-loop-if-convert-stores" make[2]: *** [minerd-cpu-miner.o] error 1 make[2]: Leaving directory `/home/miner_user/cpuminer-multi' make[1]: *** [all-recursive] error 1 make[1]: Leaving directory `/home/miner_user/cpuminer-multi' make: *** [all] error 2 my system Distributor ID: Debian Description: Debian GNU/Linux 6.0.10 (squeeze) Release: 6.0.10 Codename: squeeze
this is a very old guide, like 9 months old...dont use it... i will reply later with a newer guide...
|
|
|
|
Molet
Newbie
Offline
Activity: 8
Merit: 0
|
|
February 19, 2015, 11:40:20 AM |
|
this is a very old guide, like 9 months old...dont use it... i will reply later with a newer guide...
OK. wait
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
February 19, 2015, 01:53:35 PM |
|
This should work. sudo apt-get update && sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/wolf9466/cpuminer-multi (This is wolfs miner which is more efficient than Lucas one) cd cpuminer-multi ./autogen.sh CFLAGS="-march=native" ./configure --disable-aes-ni (Notice the --disable-aes-ni is required if your CPU doesnt support AES-NI. If it does just delete it.) make screen -S miner ./minerd -a cryptonight -o pooladdress -u moneroaddress -p x -t X(number of cores) (I assume you know how screen works) Also, have in mind that this is for Ubuntu. I have tried it in Debian and i had problems with gcc i think. Ultimately i fixed it but i dont remember right now. Anyway if you get an error ask away...
|
|
|
|
Molet
Newbie
Offline
Activity: 8
Merit: 0
|
|
February 19, 2015, 03:04:47 PM |
|
This should work. sudo apt-get update && sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/wolf9466/cpuminer-multi (This is wolfs miner which is more efficient than Lucas one) thx (I assume you know how screen works) yes Also, have in mind that this is for Ubuntu. I have tried it in Debian and i had problems with gcc i think. Ultimately i fixed it but i dont remember right now. Anyway if you get an error ask away... I will try and tell you the result
|
|
|
|
Molet
Newbie
Offline
Activity: 8
Merit: 0
|
|
February 20, 2015, 08:00:04 AM |
|
This should work. sudo apt-get update && sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/wolf9466/cpuminer-multi (This is wolfs miner which is more efficient than Lucas one) not work my system root@BDServer:/home/user_miner/cpuminer-multi# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy " make" log root@BDServer:/home/user_miner/cpuminer-multi# make make all-recursive make[1]: Entering directory `/home/user_miner/cpuminer-multi' Making all in compat make[2]: Entering directory `/home/user_miner/cpuminer-multi/compat' Making all in jansson make[3]: Entering directory `/home/user_miner/cpuminer-multi/compat/jansson' gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -march=native -MT dump.o -MD -MP -MF .deps/dump.Tpo -c -o dump.o dump.c mv -f .deps/dump.Tpo .deps/dump.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -march=native -MT hashtable.o -MD -MP -MF .deps/hashtable.Tpo -c -o hashtable.o hashtable.c mv -f .deps/hashtable.Tpo .deps/hashtable.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -march=native -MT load.o -MD -MP -MF .deps/load.Tpo -c -o load.o load.c mv -f .deps/load.Tpo .deps/load.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -march=native -MT strbuffer.o -MD -MP -MF .deps/strbuffer.Tpo -c -o strbuffer.o strbuffer.c mv -f .deps/strbuffer.Tpo .deps/strbuffer.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -march=native -MT utf.o -MD -MP -MF .deps/utf.Tpo -c -o utf.o utf.c mv -f .deps/utf.Tpo .deps/utf.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -march=native -MT value.o -MD -MP -MF .deps/value.Tpo -c -o value.o value.c mv -f .deps/value.Tpo .deps/value.Po rm -f libjansson.a ar cru libjansson.a dump.o hashtable.o load.o strbuffer.o utf.o value.o ranlib libjansson.a make[3]: Leaving directory `/home/user_miner/cpuminer-multi/compat/jansson' make[3]: Entering directory `/home/user_miner/cpuminer-multi/compat' make[3]: Цeль `all-am' нe тpeбyeт выпoлнeния кoмaнд. make[3]: Leaving directory `/home/user_miner/cpuminer-multi/compat' make[2]: Leaving directory `/home/user_miner/cpuminer-multi/compat' make[2]: Entering directory `/home/user_miner/cpuminer-multi' gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT minerd-cpu-miner.o -MD -MP -MF .deps/minerd-cpu-miner.Tpo -c -o minerd-cpu-miner.o `test -f 'cpu-miner.c' || echo './'`cpu-miner.c mv -f .deps/minerd-cpu-miner.Tpo .deps/minerd-cpu-miner.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT minerd-util.o -MD -MP -MF .deps/minerd-util.Tpo -c -o minerd-util.o `test -f 'util.c' || echo './'`util.c mv -f .deps/minerd-util.Tpo .deps/minerd-util.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT minerd-cryptonight_common.o -MD -MP -MF .deps/minerd-cryptonight_common.Tpo -c -o minerd-cryptonight_common.o `test -f 'cryptonight_common.c' || echo './'`cryptonight_common.c mv -f .deps/minerd-cryptonight_common.Tpo .deps/minerd-cryptonight_common.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT crypto/minerd-c_keccak.o -MD -MP -MF crypto/.deps/minerd-c_keccak.Tpo -c -o crypto/minerd-c_keccak.o `test -f 'crypto/c_keccak.c' || echo './'`crypto/c_keccak.c crypto/c_keccak.c: In function ‘keccak’: crypto/c_keccak.c:102:5: warning: implicit declaration of function ‘memset’ [-Wimplicit-function-declaration] crypto/c_keccak.c:102:5: warning: incompatible implicit declaration of built-in function ‘memset’ [enabled by default] crypto/c_keccak.c:111:5: warning: implicit declaration of function ‘memcpy’ [-Wimplicit-function-declaration] crypto/c_keccak.c:111:5: warning: incompatible implicit declaration of built-in function ‘memcpy’ [enabled by default] mv -f crypto/.deps/minerd-c_keccak.Tpo crypto/.deps/minerd-c_keccak.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT crypto/minerd-c_groestl.o -MD -MP -MF crypto/.deps/minerd-c_groestl.Tpo -c -o crypto/minerd-c_groestl.o `test -f 'crypto/c_groestl.c' || echo './'`crypto/c_groestl.c mv -f crypto/.deps/minerd-c_groestl.Tpo crypto/.deps/minerd-c_groestl.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT crypto/minerd-c_blake256.o -MD -MP -MF crypto/.deps/minerd-c_blake256.Tpo -c -o crypto/minerd-c_blake256.o `test -f 'crypto/c_blake256.c' || echo './'`crypto/c_blake256.c mv -f crypto/.deps/minerd-c_blake256.Tpo crypto/.deps/minerd-c_blake256.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT crypto/minerd-c_jh.o -MD -MP -MF crypto/.deps/minerd-c_jh.Tpo -c -o crypto/minerd-c_jh.o `test -f 'crypto/c_jh.c' || echo './'`crypto/c_jh.c mv -f crypto/.deps/minerd-c_jh.Tpo crypto/.deps/minerd-c_jh.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT crypto/minerd-c_skein.o -MD -MP -MF crypto/.deps/minerd-c_skein.Tpo -c -o crypto/minerd-c_skein.o `test -f 'crypto/c_skein.c' || echo './'`crypto/c_skein.c mv -f crypto/.deps/minerd-c_skein.Tpo crypto/.deps/minerd-c_skein.Po gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -I./compat/jansson -falign-loops=16 -falign-functions=16 -falign-jumps=16 -falign-labels=16 -Ofast -flto -fuse-linker-plugin -funroll-loops -fvariable-expansion-in-unroller -ftree-loop-if-convert-stores -fmerge-all-constants -fbranch-target-load-optimize2 -fsched2-use-superblocks -maes -march=native -MT minerd-cryptonight_aesni.o -MD -MP -MF .deps/minerd-cryptonight_aesni.Tpo -c -o minerd-cryptonight_aesni.o `test -f 'cryptonight_aesni.c' || echo './'`cryptonight_aesni.c In file included from cryptonight.h:6:0, from cryptonight_aesni.c:2: miner.h:188:58: warning: ‘struct cryptonight_ctx’ declared inside parameter list [enabled by default] cryptonight_aesni.c: In function ‘cryptonight_hash_ctx’: cryptonight_aesni.c:90:2: warning: passing argument 3 of ‘keccak’ from incompatible pointer type [enabled by default] In file included from cryptonight_aesni.c:2:0: cryptonight.h:64:6: note: expected ‘uint8_t *’ but argument is of type ‘union hash_state *’ cryptonight_aesni.c:94:5: warning: implicit declaration of function ‘memcpy’ [-Wimplicit-function-declaration] cryptonight_aesni.c:94:5: warning: incompatible implicit declaration of built-in function ‘memcpy’ [enabled by default] cryptonight_aesni.c:172:18: warning: initialization from incompatible pointer type [enabled by default] cryptonight_aesni.c:215:2: warning: passing argument 1 of ‘keccakf’ from incompatible pointer type [enabled by default] In file included from cryptonight_aesni.c:2:0: cryptonight.h:65:6: note: expected ‘uint64_t *’ but argument is of type ‘union hash_state *’ cryptonight_aesni.c:162:4: error: impossible register constraint in ‘asm’ cryptonight_aesni.c:217:1: error: impossible register constraint in ‘asm’ cryptonight_aesni.c:217:1: error: impossible register constraint in ‘asm’ cryptonight_aesni.c:162:4: error: impossible register constraint in ‘asm’ cryptonight_aesni.c:217:1: error: impossible register constraint in ‘asm’ cryptonight_aesni.c:217:1: error: impossible register constraint in ‘asm’ make[2]: *** [minerd-cryptonight_aesni.o] Error 1 make[2]: Leaving directory `/home/user_miner/cpuminer-multi' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/user_miner/cpuminer-multi' make: *** [all] Error 2 Go to a Wolf0 topic
|
|
|
|
forevernoob
|
|
February 21, 2015, 12:16:43 AM |
|
Could you post output of ./configure ?
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
February 21, 2015, 12:20:08 AM |
|
Could you post output of ./configure ?
His problem was that he had a 32-bit system...
|
|
|
|
DurrMinerNoob
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 09, 2016, 11:38:33 AM |
|
Hi guys, as my name suggests, I am new to Monero mining (and coding generally). I have followed GreekBitcoin's guide and it seems to be working perfectly fine. However, I use minergate, and apparently, I cannot connect the digitalocean cloud mining to my current account which I use. Is there any code that I can key in so that I can link the digitalocean mining to my own account that I have already registered? Thanks and sorry for posting on such an outdated thread!
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 09, 2016, 11:59:32 AM |
|
Hi guys, as my name suggests, I am new to Monero mining (and coding generally). I have followed GreekBitcoin's guide and it seems to be working perfectly fine. However, I use minergate, and apparently, I cannot connect the digitalocean cloud mining to my current account which I use. Is there any code that I can key in so that I can link the digitalocean mining to my own account that I have already registered? Thanks and sorry for posting on such an outdated thread!
This thread is too outdated. Also if i recall correctly the miner this guide use is not efficient enough. I cannot understand what you mask. Finally dont use Minergate. It is bad.
|
|
|
|
DurrMinerNoob
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 10, 2016, 11:22:40 AM |
|
OK. I have the miner working OK with digitalocean but error came out when using interserver.net root@miner1:~/cpuminer-multi# CFLAGS="-march=native" ./configure checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: in `/root/cpuminer-multi/cpuminer-multi': configure: error: no acceptable C compiler found in $PATH See `config.log' for more details root@miner1:~/cpuminer-multi# make make: *** No targets specified and no makefile found. Stop.
Any fixes to that? Everything before the codes in here works ok, and on digitalocean all codes ok too
|
|
|
|
GreekBitcoin (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
getmonero.org
|
|
May 12, 2016, 12:51:40 AM |
|
First of all use this mine: https://github.com/wolf9466/cpuminer-multiso it should be: sudo apt-get update && sudo apt-get install git make automake screen libcurl4-openssl-dev git clone https://github.com/wolf9466/cpuminer-multicd cpuminer-multi ./autogen.sh CFLAGS="-march=native" ./configure make Btw you probably have a cpuminer-multi folder already so delete with rm -rf cpuminer-multi in order to download the new miner.
|
|
|
|
justuser
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 19, 2017, 10:39:01 AM |
|
Hello, I try to install cryptonote daemon How to fix this problem? ./configure: line 5668: syntax error near unexpected token `,' ./configure: line 5668: `LIBCURL_CHECK_CONFIG(, 7.15.2, ,'
Here is log file, g++ version - 4.8.5
|
|
|
|
justuser
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 19, 2017, 11:09:25 AM |
|
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by cpuminer configure 2.3.3, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure ## --------- ## ## Platform. ## ## --------- ## hostname = node11.isp.hyperhost.ua uname -m = x86_64 uname -r = 3.10.0-427.36.1.lve1.4.44.el7.x86_64 uname -s = Linux uname -v = #1 SMP Sun Apr 2 11:56:48 EDT 2017 /usr/bin/uname -p = x86_64 /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/bin PATH: /bin PATH: /usr/bin PATH: /usr/local/sbin PATH: /usr/sbin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2330: checking build system type configure:2344: result: x86_64-unknown-linux-gnu configure:2364: checking host system type configure:2377: result: x86_64-unknown-linux-gnu configure:2397: checking target system type configure:2410: result: x86_64-unknown-linux-gnu configure:2453: checking for a BSD-compatible install configure:2521: result: /bin/install -c configure:2532: checking whether build environment is sane configure:2587: result: yes configure:2738: checking for a thread-safe mkdir -p configure:2777: result: /bin/mkdir -p configure:2784: checking for gawk configure:2800: found /bin/gawk configure:2811: result: gawk configure:2822: checking whether make sets $(MAKE) configure:2844: result: yes configure:2873: checking whether make supports nested variables configure:2890: result: yes configure:2978: checking whether to enable maintainer-specific portions of Makefiles configure:2987: result: no configure:3015: checking for style of include used by make configure:3043: result: GNU configure:3114: checking for gcc configure:3130: found /bin/gcc configure:3141: result: gcc configure:3370: checking for C compiler version configure:3379: gcc --version >&5 gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-11) Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3390: $? = 0 configure:3379: gcc -v >&5 Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.8.5/lto-wrapper Target: x86_64-redhat-linux Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-linker-hash-style=gnu --enable-languages=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin --enable-initfini-array --disable-libgcj --with-isl=/builddir/build/BUILD/gcc-4.8.5-20150702/obj-x86_64-redhat-linux/isl-install --with-cloog=/builddir/build/BUILD/gcc-4.8.5-20150702/obj-x86_64-redhat-linux/cloog-install --enable-gnu-indirect-function --with-tune=generic --with-arch_32=x86-64 --build=x86_64-redhat-linux Thread model: posix gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) configure:3390: $? = 0 configure:3379: gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:3390: $? = 4 configure:3379: gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion' gcc: fatal error: no input files compilation terminated. configure:3390: $? = 4 configure:3410: checking whether the C compiler works configure:3432: gcc -march=native conftest.c >&5 configure:3436: $? = 0 configure:3484: result: yes configure:3487: checking for C compiler default output file name configure:3489: result: a.out configure:3495: checking for suffix of executables configure:3502: gcc -o conftest -march=native conftest.c >&5 configure:3506: $? = 0 configure:3528: result: configure:3550: checking whether we are cross compiling configure:3558: gcc -o conftest -march=native conftest.c >&5 configure:3562: $? = 0 configure:3569: ./conftest configure:3573: $? = 0 configure:3588: result: no configure:3593: checking for suffix of object files configure:3615: gcc -c -march=native conftest.c >&5 configure:3619: $? = 0 configure:3640: result: o configure:3644: checking whether we are using the GNU C compiler configure:3663: gcc -c -march=native conftest.c >&5 configure:3663: $? = 0 configure:3672: result: yes configure:3681: checking whether gcc accepts -g configure:3701: gcc -c -g conftest.c >&5 configure:3701: $? = 0 configure:3742: result: yes configure:3759: checking for gcc option to accept ISO C89 configure:3822: gcc -c -march=native conftest.c >&5 configure:3822: $? = 0 configure:3835: result: none needed configure:3857: checking dependency style of gcc configure:3968: result: gcc3 configure:3983: checking for gcc option to accept ISO C99 configure:4132: gcc -c -march=native conftest.c >&5 conftest.c:61:29: error: expected ';', ',' or ')' before 'text'
|
|
|
|
|