burnbabyburn71
|
|
May 21, 2014, 07:38:27 AM |
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? No idea, sorry. I've never used Cgwatcher. Try each one and see what happens I guess.
|
Web Dev | General Graphics Design | Windows/Linux Wallet Compiles | Certified member of the BCs
|
|
|
FortuneNVirtue
Member
Offline
Activity: 88
Merit: 10
|
|
May 21, 2014, 08:14:41 AM |
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it.
|
|
|
|
streetlight
|
|
May 21, 2014, 08:30:56 AM |
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it. CGWatcher Won't detect the profile when its running...
|
|
|
|
Vargpost
Jr. Member
Offline
Activity: 37
Merit: 1
|
|
May 21, 2014, 08:45:01 AM |
|
Not stable miner. Crushes, no temp&fan control (Win7+8).. back to Sgh miner.
OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
|
|
|
|
SpeedDemon13
|
|
May 21, 2014, 08:53:39 AM |
|
Not stable miner. Crushes, no temp&fan control (Win7+8).. back to Sgh miner.
OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
This miner crashes a lot.
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
FortuneNVirtue
Member
Offline
Activity: 88
Merit: 10
|
|
May 21, 2014, 09:02:37 AM |
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it. CGWatcher Won't detect the profile when its running... Delete your (not-working) kirino-sphsgminer profile first, then run "run.bat". let it run few seconds, accept some shares then close it. CGWatcher should pop up "'Profile not found' The miner that is currently running is not used in any profiles, would you like to create a profile for it now"
|
|
|
|
Elun
Member
Offline
Activity: 117
Merit: 10
|
|
May 21, 2014, 09:07:57 AM Last edit: May 22, 2014, 01:32:41 AM by Elun |
|
Not stable miner. Crushes, no temp&fan control (Win7+8).. back to Sgh miner.
OP we waiting for sources - peoples can help with temp and fan, in other case - it`s another auto-dev-donator like was on smelter`s quark.
5 hours. No crush. Will update stable len later. Upd: Still no crush.
|
|
|
|
streetlight
|
|
May 21, 2014, 09:28:40 AM |
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it. CGWatcher Won't detect the profile when its running... Delete your (not-working) kirino-sphsgminer profile first, then run "run.bat". let it run few seconds, accept some shares then close it. CGWatcher should pop up "'Profile not found' The miner that is currently running is not used in any profiles, would you like to create a profile for it now" Where would I Find ''Delete your (not-working) kirino-sphsgminer profile first'' As I am runnning CGWatcher 1.35 Just downloaded and installed 1.38, that has no profiles. And won't detect SGminer working
|
|
|
|
Shurikenix
Newbie
Offline
Activity: 26
Merit: 0
|
|
May 21, 2014, 09:34:47 AM |
|
Why --gpu-vddc don't work on Windows?
|
|
|
|
Ninetoe
Newbie
Offline
Activity: 45
Merit: 0
|
|
May 21, 2014, 09:39:07 AM |
|
Why --gpu-vddc don't work on Windows?
it does, but it depends on the card generation. i can use gpu-vddc with my 5870 cards for example.
|
|
|
|
wacko
Legendary
Offline
Activity: 1106
Merit: 1014
|
|
May 21, 2014, 09:58:25 AM |
|
Why --gpu-vddc don't work on Windows?
it does, but it depends on the card generation. i can use gpu-vddc with my 5870 cards for example. Did you manage to run your 5870s with this new miner? I'm getting lots of HW errors using the same config that I use with sph-sgminer (which is working fine without any HW). Could you please share your basic parameters (like TC, g, worksize etc)?
|
|
|
|
FortuneNVirtue
Member
Offline
Activity: 88
Merit: 10
|
|
May 21, 2014, 10:11:01 AM |
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it. CGWatcher Won't detect the profile when its running... Delete your (not-working) kirino-sphsgminer profile first, then run "run.bat". let it run few seconds, accept some shares then close it. CGWatcher should pop up "'Profile not found' The miner that is currently running is not used in any profiles, would you like to create a profile for it now" Where would I Find ''Delete your (not-working) kirino-sphsgminer profile first'' As I am runnning CGWatcher 1.35 Just downloaded and installed 1.38, that has no profiles. And won't detect SGminer working So you might not create any profile yet. So no need to delete anything. Then just run "run.bat" (is it working or not?) If it's working, then close it. And click the CGWatcher and it pops up like this
|
|
|
|
bronan
|
|
May 21, 2014, 10:30:19 AM |
|
I have tested the program and it works well The only thing i would like to see fixed is the temp control missing It has been running for 2 days stable as a rock no need for cgwatcher
And for you CHEAP bastards who do not want to pay a fee Stop messing with the miner and go back to your old if you do not want to contribute The program works and i do not have a problem giving that little 2 % to one who deserve it
|
|
|
|
FortuneNVirtue
Member
Offline
Activity: 88
Merit: 10
|
|
May 21, 2014, 10:54:17 AM |
|
There is another updated version which could show you the temperature. You could see from edited original post.
|
|
|
|
ivanlabrie
|
|
May 21, 2014, 11:03:26 AM |
|
I have tested the program and it works well The only thing i would like to see fixed is the temp control missing It has been running for 2 days stable as a rock no need for cgwatcher
And for you CHEAP bastards who do not want to pay a fee Stop messing with the miner and go back to your old if you do not want to contribute The program works and i do not have a problem giving that little 2 % to one who deserve it
People are indeed cheap, but the OP should have made his own code instead of using someone else's open sourced miner and put a fee on top, he is in blatant violation of the GPL license. The other miners with fees are built from the ground up, at least they appear to be. Not the same thing.
|
|
|
|
streetlight
|
|
May 21, 2014, 11:24:08 AM |
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it. CGWatcher Won't detect the profile when its running... Delete your (not-working) kirino-sphsgminer profile first, then run "run.bat". let it run few seconds, accept some shares then close it. CGWatcher should pop up "'Profile not found' The miner that is currently running is not used in any profiles, would you like to create a profile for it now" Where would I Find ''Delete your (not-working) kirino-sphsgminer profile first'' As I am runnning CGWatcher 1.35 Just downloaded and installed 1.38, that has no profiles. And won't detect SGminer working So you might not create any profile yet. So no need to delete anything. Then just run "run.bat" (is it working or not?) If it's working, then close it. And click the CGWatcher and it pops up like this Thanks for your help.... However I am not getting the Pop up to make a new profile, even during when its running or when its closed.
|
|
|
|
boubou
|
|
May 21, 2014, 11:30:16 AM |
|
I tryed yesterday, on Pimp, and it crashes, may be because of the temp that are not listed, and so the rpm did not adjust and the card suffer overheat.
I used it on windows8.1 and some watercooled card, and it worked fine, and I'll let the 2% on (I'm the guy that pay a bounty for 10% increase hashrate on the 290. I paid 30 Drk, asked the community to sent me back a few dark since I paid them all by myself, and received not a single donation even if the forum was full of people suffering from the same bug, and enjoy the fix. So the argument that the community will make some donation if theyr are not forced to seems not valid)
I'll try to set it on Pimp with the new revision to see if the temps are fixed.
|
BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
|
|
|
GhostPlayer
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
May 21, 2014, 11:47:45 AM |
|
Yeah, the guy doing DRK QT compiling on his own for Mac users, does it for free and only ask a small donation, has gotten ZERO donations so far. I'm just saving up for the masternode launch Sunday, and then he's getting some DRKS, as I sent him a msg exactly for him not to lose faith! These excuses are pathetic. The thing works rock solid. Either he tries to sell it and people call it scam and malware... or donations an no one gives a rats ass. 2% earning for a 50% earning increase (in my case more)... When some one either beats and releases the code, then this obviously will make no more sense. Demagogs, all's of you ! I went from 9.5 - 11mh to this. And without changing a single parameter from regular sg 4.1.0 I cant wait to test this on a 15ms ping p2pool I have nearby, but this current pool is giving 25% extra so this couldnt have come at a better time Girino, send me your DRK address, I'd like to send you a donation!
|
|
|
|
rudarSRB
|
|
May 21, 2014, 11:49:07 AM |
|
so far so good
|
|
|
|
GhostPlayer
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
May 21, 2014, 11:50:17 AM |
|
double post sorry
|
|
|
|
|