[ANN][CLAM] CLAMs, Proof-Of-Chain, Proof-Of-Working-Stake, a.k.a. "Clamcoin"

[canth]

Anybody that has any private keys that are able to be dug, willing to test out a website let me know.

I expect anyone who knows about CLAM and had access to funded private keys will have dug them up already.

I like to think optimistically the search continues...

FWIW, I finally dug up ~25 funded private keys yesterday and am now staking. Wasn't really paying attention to CLAM prior to this week. The law of diminishing returns probably applies but I'm sure there are others.

[1714024946]

1714024946

[1714024946]

1714024946

[BayAreaCoins]

Anybody that has any private keys that are able to be dug, willing to test out a website let me know.

I expect anyone who knows about CLAM and had access to funded private keys will have dug them up already.

I like to think optimistically the search continues...

FWIW, I finally dug up ~25 funded private keys yesterday and am now staking. Wasn't really paying attention to CLAM prior to this week. The law of diminishing returns probably applies but I'm sure there are others.

Aw man if you have any other "good" priv keys we'd buy a few off you in order to test Clamchecker.

Perhaps you have some changeaddresses you forgot?

[canth]

Anybody that has any private keys that are able to be dug, willing to test out a website let me know.

I expect anyone who knows about CLAM and had access to funded private keys will have dug them up already.

I like to think optimistically the search continues...

FWIW, I finally dug up ~25 funded private keys yesterday and am now staking. Wasn't really paying attention to CLAM prior to this week. The law of diminishing returns probably applies but I'm sure there are others.

Aw man if you have any other "good" priv keys we'd buy a few off you in order to test Clamchecker.

Perhaps you have some changeaddresses you forgot?

I have a bunch of other addresses I'm sure - some still in use. I'll take a look this weekend and see if there's anything that I can part with.

[BayAreaCoins]

Anybody that has any private keys that are able to be dug, willing to test out a website let me know.

I expect anyone who knows about CLAM and had access to funded private keys will have dug them up already.

I like to think optimistically the search continues...

FWIW, I finally dug up ~25 funded private keys yesterday and am now staking. Wasn't really paying attention to CLAM prior to this week. The law of diminishing returns probably applies but I'm sure there are others.

Aw man if you have any other "good" priv keys we'd buy a few off you in order to test Clamchecker.

Perhaps you have some changeaddresses you forgot?

I have a bunch of other addresses I'm sure - some still in use. I'll take a look this weekend and see if there's anything that I can part with.

Sweet just shoot me a PM or w/e.

Thank you very much <3

[ccminer.cf]

Hello

I would like to know how to auto split the staking coins and how to desable it after I reach my split treshold.

Thank you

[smooth]

Hello

I would like to know how to auto split the staking coins and how to desable it after I reach my split treshold.

Thank you

Add splitsize=N to your clam.conf file. Any larger outputs you have now will be autosplit when they stake.

[Stein]

Literally "splitsize=N"

or does the N need to be a number ?

and can this be used on any say..qt wallet that is POS ? Sorry for the newb questions

[smooth]

Literally "splitsize=N"

or does the N need to be a number ?

N is what size you want (yes, a number)

[Stein]

Thanks smooth. What size do you suggest? Can this be used for other POS coins in thier conf files ?
How do I know what the "threshold" size is? I feel like I just learned magic lol

[seedtrue]

I don't know why he thought clam or khashier was a scam though.

If you read the first few pages of this thread it was a pretty common idea at the start. It does look scammy on the surface having to give up your BTC private keys to claim free CLAMs so the confusion is understandable.

I would contact the guy and ask him to remove his accusation but from what I've seen of previous interactions with him he isn't exactly rational.

I felt kind of burned by the khashier multipool...I would not go as far as calling it a scam though.

[smooth]

Thanks smooth. What size do you suggest? Can this be used for other POS coins in thier conf files ?
How do I know what the "threshold" size is? I feel like I just learned magic lol

I'm using 15. There's probably an exact optimum number and that probably isn't it, but it is close enough. The main thing is to avoid very large outputs.

[ccminer.cf]

Hello

I would like to know how to auto split the staking coins and how to desable it after I reach my split treshold.

Thank you

Add splitsize=N to your clam.conf file. Any larger outputs you have now will be autosplit when they stake.

Thank you

I did it and it works fine!
By the way I have to thank the guys from the IRC channel, they are very nice and helpful

[dooglus]

Thanks smooth. What size do you suggest? Can this be used for other POS coins in thier conf files ?
How do I know what the "threshold" size is? I feel like I just learned magic lol

The only reason to split your outputs up into smaller sizes is that when an output stakes it is unable to stake again for the next 500 blocks (about 8 hours). If you only have a single output that means your whole balance is sitting idle for 8 hours each time you stake.

If instead you have your balance split up into 100 separate pieces then when one of them stakes only that one will be sitting idle for 8 hours and the other 99 will continue trying to stake.

From this point of view you would want to split your balance up into as many small pieces as possible. But there are a few reasons not to split too much:

1) you have to pay a transaction fee when creating the split outputs which is proportional to the number of outputs you create
2) you also have to pay a transaction fee when spending the outputs; again it is proportional to the number of outputs you are spending
3) there is a limit on maximum transaction size of 100kB; this can make it impossible to spend all your split outputs in a single transaction if you have lots of them
4) every 16 seconds your wallet has to check each output in your wallet to see if it can stake yet; if you have too many it can take more than 16 seconds to check them all, and so you miss out on staking chances

I find I can check about 100k outputs per 16 seconds on a single CPU.

As a rule of thumb I try to keep my outputs at around 30 CLAM each. That way I expect to have about 1% of my wallet balance sitting idle at any time. I estimate that each 1000 CLAMs stakes about once per day, so each 3000 CLAMs stakes about once per 8 hours, and so each 30 CLAMs stakes about once per 800 hours, meaning that 1% is expected to be idle at any time.

Finally, notice that in addition to splitsize=N, you can also set combinelimit=N. That will cause the wallet to combine small inputs together when they stake, up to the specified size.

I am currently using:

  splitsize=20
  combinelimit=40

Meaning that when a 39 CLAM output stakes it is split into two 20 CLAM outputs, and when a 15 CLAM output stakes it will be combined with any other small outputs to make an output of size 40 CLAM or less. This way I always have a population of outputs between 20 and 40 CLAM in size without having to micro-manage them myself.

[rocoro]

how i can have address to receive this coin? 

Run daemon and do:
getnewaddress [account]

[alanhendarsyah]

ok im make one video

https://youtu.be/2fIIrvwfnjU

user ID : 970931

[IOTUSA]

Thanks smooth. What size do you suggest? Can this be used for other POS coins in thier conf files ?
How do I know what the "threshold" size is? I feel like I just learned magic lol

The only reason to split your outputs up into smaller sizes is that when an output stakes it is unable to stake again for the next 500 blocks (about 8 hours). If you only have a single output that means your whole balance is sitting idle for 8 hours each time you stake.

If instead you have your balance split up into 100 separate pieces then when one of them stakes only that one will be sitting idle for 8 hours and the other 99 will continue trying to stake.

From this point of view you would want to split your balance up into as many small pieces as possible. But there are a few reasons not to split too much:

1) you have to pay a transaction fee when creating the split outputs which is proportional to the number of outputs you create
2) you also have to pay a transaction fee when spending the outputs; again it is proportional to the number of outputs you are spending
3) there is a limit on maximum transaction size of 100kB; this can make it impossible to spend all your split outputs in a single transaction if you have lots of them
4) every 16 seconds your wallet has to check each output in your wallet to see if it can stake yet; if you have too many it can take more than 16 seconds to check them all, and so you miss out on staking chances

I find I can check about 100k outputs per 16 seconds on a single CPU.

As a rule of thumb I try to keep my outputs at around 30 CLAM each. That way I expect to have about 1% of my wallet balance sitting idle at any time. I estimate that each 1000 CLAMs stakes about once per day, so each 3000 CLAMs stakes about once per 8 hours, and so each 30 CLAMs stakes about once per 800 hours, meaning that 1% is expected to be idle at any time.

Finally, notice that in addition to splitsize=N, you can also set combinelimit=N. That will cause the wallet to combine small inputs together when they stake, up to the specified size.

I am currently using:

  splitsize=20
  combinelimit=40

Meaning that when a 39 CLAM output stakes it is split into two 20 CLAM outputs, and when a 15 CLAM output stakes it will be combined with any other small outputs to make an output of size 40 CLAM or less. This way I always have a population of outputs between 20 and 40 CLAM in size without having to micro-manage them myself.

So would you split a 10k clam wallet into 30 addresses for staking?

[dooglus]

So would you split a 10k clam wallet into 30 addresses for staking?

No, two things:

1) the number of addresses doesn't matter; it's the number of separate outputs that matters; if I send 10 CLAMs to your address and then send another 10 CLAMs to your address you end up with two separate 10 CLAM outputs at the same address. They are independent, and will stake independently. They don't merge into a single 20 CLAM output automatically just because I sent them both to the same address.

2) I was recommending splitting your coins into outputs of size 30 CLAMs each. So I would split a 10k wallet into 333 separate outputs of 30 CLAMs each. And to show I practice what I preach, here's one I prepared earlier.

[Johnny00]

What wallet do you use for clam?  Can you have a bit coin and calm wallet on the same phone? I want to buy some clam to use on just dice

[andulolika]

What wallet do you use for clam?  Can you have a bit coin and calm wallet on the same phone? I want to buy some clam to use on just dice

https://github.com/nochowderforyou/clams/releases/tag/v1.4.17 , you have no clam wallet for your phone, i made a crowdfunding about this but people never bothered.

[ccminer.cf]

One question about mining (minting):

-in this "Proof-Of-Working-Stake" the age and the weight (quantity of the output) are taken into consideration?
One output of 100 clams with 5 days age and another output of 10 clams with 3 days age, while they staking they have the same chance to find a block or not?

Thank you