|
|
Burninj
Legendary
Activity: 1148
Merit: 1000
|
 |
July 29, 2014, 04:28:48 PM |
|
what would be the bounty for a gpu cryptonite miner?
|
|
|
|
|
CiscoStud
Newbie
Activity: 20
Merit: 0
|
|
July 29, 2014, 08:03:35 PM |
|
people, 6.1 miner sucks.
it shows a couple % more hash in miner itself, but pool says 20-30% less, and you get 20-30% less xmr in your wallet.
also, clay added two more dev fee adresses for you guys that are using older minerproxys.
4.0 miner + minerproxy works the best.
5% is just too much.
Yup, I totally agree! I was getting robbed using 6.1. Going back to 4.0 brought up my hash at both pools I use. **6.1 is a piece of shit** |
|
|
|
|
Crypto_EX
Member
Activity: 70
Merit: 10
|
|
July 29, 2014, 10:17:46 PM |
|
people, 6.1 miner sucks.
it shows a couple % more hash in miner itself, but pool says 20-30% less, and you get 20-30% less xmr in your wallet.
also, clay added two more dev fee adresses for you guys that are using older minerproxys.
4.0 miner + minerproxy works the best.
5% is just too much.
Yup, I totally agree! I was getting robbed using 6.1. Going back to 4.0 brought up my hash at both pools I use. **6.1 is a piece of shit** does 4.0 work for older 6900 , 5800 series GPUs ?! and yes 5% is too high , period |
|
|
|
|
demios
Newbie
Activity: 7
Merit: 0
|
|
July 29, 2014, 10:37:33 PM |
|
people, 6.1 miner sucks.
it shows a couple % more hash in miner itself, but pool says 20-30% less, and you get 20-30% less xmr in your wallet.
also, clay added two more dev fee adresses for you guys that are using older minerproxys.
4.0 miner + minerproxy works the best.
5% is just too much.
Yup, I totally agree! I was getting robbed using 6.1. Going back to 4.0 brought up my hash at both pools I use. **6.1 is a piece of shit** does 4.0 work for older 6900 , 5800 series GPUs ?! and yes 5% is too high , period don't now that. you can use newer versions of miner that works, and also use the newest version of minerproxy. |
|
|
|
|
Crypto_EX
Member
Activity: 70
Merit: 10
|
|
July 29, 2014, 10:41:48 PM |
|
people, 6.1 miner sucks.
it shows a couple % more hash in miner itself, but pool says 20-30% less, and you get 20-30% less xmr in your wallet.
also, clay added two more dev fee adresses for you guys that are using older minerproxys.
4.0 miner + minerproxy works the best.
5% is just too much.
Yup, I totally agree! I was getting robbed using 6.1. Going back to 4.0 brought up my hash at both pools I use. **6.1 is a piece of shit** does 4.0 work for older 6900 , 5800 series GPUs ?! and yes 5% is too high , period don't now that. you can use newer versions of miner that works, and also use the newest version of minerproxy. what does miner proxy do ? |
|
|
|
|
wpalczynski
Legendary
Activity: 1456
Merit: 1000
|
|
July 30, 2014, 04:51:59 AM |
|
Windows 8.1, 32GB Ram, 2x r9 290 and Im getting about 1200h combined rate in the Claymore console. Is that normal for r9 290s? Are there any switches or parameters I could pass when starting the program to increase hash rate?
|
|
|
|
DES_MX
Member
Activity: 215
Merit: 13
|
|
July 30, 2014, 07:48:22 AM |
|
Windows 8.1, 32GB Ram, 2x r9 290 and Im getting about 1200h combined rate in the Claymore console. Is that normal for r9 290s? Are there any switches or parameters I could pass when starting the program to increase hash rate?
If Elpida memory then yes it's okay hash If Hynix then overclock to 1075/1500 and bump voltage very slightly (.025v) You should get 750h+ per card.. So count on 1.5khash total Also use 4.0 miner! Newer versions report higher hash in console but significantly lower "real" hash on pool. On dwarfpool I see 15-20% difference! |
|
|
|
|
HashInvest
Full Member
Activity: 143
Merit: 100
Pools: XMR.HashInvest.net
|
|
July 30, 2014, 08:21:32 AM |
|
 Join Monero Pool http://hashinvest.net / EU / Low 1.5% feesUpdate: Added payouts log for transparencyXMR mining Getting Started for Linux, Windows and Mac users. I take care of this pool all the time. Stable pool with instant online support. Enable desktop notifications and always stay in tune! Instant support HashInvest won't speculate on volatile luck and hardware.
Just stable, well-maintained pool, kind support will help your even at night. |
|
|
|
wpalczynski
Legendary
Activity: 1456
Merit: 1000
|
|
July 30, 2014, 11:10:55 AM |
|
How can I determine what memory I have? I still have the boxes would it say on them? Windows 8.1, 32GB Ram, 2x r9 290 and Im getting about 1200h combined rate in the Claymore console. Is that normal for r9 290s? Are there any switches or parameters I could pass when starting the program to increase hash rate?
If Elpida memory then yes it's okay hash If Hynix then overclock to 1075/1500 and bump voltage very slightly (.025v) You should get 750h+ per card.. So count on 1.5khash total Also use 4.0 miner! Newer versions report higher hash in console but significantly lower "real" hash on pool. On dwarfpool I see 15-20% difference! |
|
|
|
|
Eastwind
|
|
July 30, 2014, 11:48:56 AM |
|
How can I determine what memory I have? I still have the boxes would it say on them?
You can use GPUz. |
|
|
|
|
wpalczynski
Legendary
Activity: 1456
Merit: 1000
|
|
July 30, 2014, 12:05:44 PM |
|
Thank you. How can I determine what memory I have? I still have the boxes would it say on them?
You can use GPUz. |
|
|
|
wpalczynski
Legendary
Activity: 1456
Merit: 1000
|
|
July 30, 2014, 01:16:36 PM |
|
Is there a parameter in the miner with which I could increase the fan speed? Cards are running at 93-94 celsius. Thank you. How can I determine what memory I have? I still have the boxes would it say on them?
You can use GPUz. |
|
|
|
|
Eastwind
|
|
July 30, 2014, 02:25:34 PM |
|
Is there a parameter in the miner with which I could increase the fan speed? Cards are running at 93-94 celsius.
No. You have to use software such as MSI afterburner. |
|
|
|
|
wpalczynski
Legendary
Activity: 1456
Merit: 1000
|
|
July 30, 2014, 02:30:59 PM |
|
Got it. Thanks. Is there a parameter in the miner with which I could increase the fan speed? Cards are running at 93-94 celsius.
No. You have to use software such as MSI afterburner. |
|
|
|
Tiger78
Member
Activity: 83
Merit: 10
|
|
July 30, 2014, 03:11:29 PM |
|
Please give a link to
Claymore CryptoNote GPU Miner v4
|
|
|
|
|
|
BitRock
|
|
July 30, 2014, 03:13:15 PM |
|
Please give a link to
Claymore CryptoNote GPU Miner v4
https://mega.co.nz/#F!e4JVEAIJ!l1iF4z10fMyJzY5-LnyC2A |
|
|
|
|
Crypto_EX
Member
Activity: 70
Merit: 10
|
|
July 30, 2014, 03:18:45 PM |
|
why do i keep seeing devfee : found share like all the time it's like the miner is mining for him rather than me i see dev fee found share more than i see found share without the "dev fee :"
somebody wants to explain
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Activity: 1610
Merit: 1325
Miners developer
|
|
July 30, 2014, 03:32:13 PM |
|
why do i keep seeing devfee : found share like all the time it's like the miner is mining for him rather than me i see dev fee found share more than i see found share without the "dev fee :"
somebody wants to explain
7 pages ago: https://bitcointalk.org/index.php?topic=638915.msg7907911#msg7907911 |
|
|
|
wanttalk
Newbie
Activity: 1
Merit: 0
|
|
August 01, 2014, 01:59:46 AM |
|
Hi, claymore, i have a lot of 6850 and 6870 cards.
the hashrate is too low.
6X6850 : overclock to 850, got 960 h/s
6X6870 : not overclock, got 1020 h/s
is this the good h/s?
help. thank you.
|
|
|
|
|
|
