Claymore's CryptoNote AMD GPU Miner v11.3

[Munhenhos]

Running start.bat and nsgpucnminer.exe closes on startup without any log file or warnings (hard to tell, window closes so fast). At first I thought it was my virus scanner but I added it to the list of exclusions and it's still shutting down instantly.

Windows 10 64-Bit
4x AMD RX 570

config.txt:

-o ssl://xmr-us-east1.nanopool.org:14433
-u ###XMR ADDRESS###.###USERNAME###/###EMAIL###
-p z
-ftime 1

-ttli 80
-tstop 85
-mclock 1900
-cclock 1150
-cvddc 950
-tt 70
-fanmin 40

Any suggestions?

open cmd.exe and go to the start.bat folder and run it. that way you can check what's happening. But still, i think your problem is related with the -u line. Did you put your own adress.username/email?

[bdon22]

Running start.bat and nsgpucnminer.exe closes on startup without any log file or warnings (hard to tell, window closes so fast). At first I thought it was my virus scanner but I added it to the list of exclusions and it's still shutting down instantly.

Windows 10 64-Bit
4x AMD RX 570

config.txt:

-o ssl://xmr-us-east1.nanopool.org:14433
-u ###XMR ADDRESS###.###USERNAME###/###EMAIL###
-p z
-ftime 1

-ttli 80
-tstop 85
-mclock 1900
-cclock 1150
-cvddc 950
-tt 70
-fanmin 40

Any suggestions?

open cmd.exe and go to the start.bat folder and run it. that way you can check what's happening. But still, i think your problem is related with the -u line. Did you put your own adress.username/email?

-u line is correct, I just replaced my actual ID's with ###whatever### for privacy purposes.

When I run from command prompt there is no error or warning messages, it just goes to a new line after showing nsgcpuminer.exe

[questen]

Claymore, whether there will be an update of the program miner?

[Claymore]

Claymore, whether there will be an update of the program miner?

Previous page:
https://bitcointalk.org/index.php?topic=638915.msg20897855#msg20897855

[notbatman]

How about some Linux binaries? Wine doesn't work on this, it says seg fault I think.

Also the miner doesn't seem to be working that hard at all, the GPU is so cold the fans stop spinning for long periods. Surly we can get some dual mining action going?



edit:

It's probably going to take me all day to compile and successfully execute Wolf's miner, there's some sort of issue with network connectivity and also OpenCL introduced during a ubuntu auto update that broke the majority of miners I use. Your ETH/DCR miner is the only one that currently works, LOL.


edit2:

If anybody else has the issue with missing OpenCL libs I found the problem.

Code:

sudo apt-get install ocl-icd-opencl-dev

This dev lib is required for many apps.

[questen]

Claymore, whether there will be an update of the program miner?

Previous page:
https://bitcointalk.org/index.php?topic=638915.msg20897855#msg20897855

THX

[DonBit]

Claymore, whether there will be an update of the program miner?

Previous page:
https://bitcointalk.org/index.php?topic=638915.msg20897855#msg20897855

Eager to see Claymore's new version for the RX Vegas. I'm currently running Wolf's with a Liquid Cooled RX Vega 64 and is hashing around 1440 H/s with no modding.

[42davidsmith42]

Does the -powlim function no longer work?  Keep getting unknown option when trying to use it with 270X and 280X. 

[ysakay]

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe
-o ssl://xmr-eu1.nanopool.org:14433
-u
437gzZXn343Bc9kaxG4mzriUzcdhk4rSJTwUeCwZdQbCHWfUZu2nkryWbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm41zoVan.1/ysakay@gmail.com
-p z
-ftime 1
-a 1


that's my bat file. ı have some problems.

- i can't see on nanopool when i check my adress. I started 30 min ago.
- on the miner Windows, all gpus and fans are 0.
- cannot convert blob data
how can i fix this? i have 6 rx 480 and i get 4200 h/s.

[Saphire]

Hello,
these values are normal for 6x RX580 Cards ?

[cyz0325]

Why not see  GPU  temperature  and  fans?

[climbingfool]

Does this have support for NVidia graphics cards? I'm having trouble finding the answer as the original read me says its AMD specific.
Also is it compatible with Ubuntu 16.04?

Thanks a ton in advance

[ayiphelmy]

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe
-o ssl://xmr-eu1.nanopool.org:14433
-u
437gzZXn343Bc9kaxG4mzriUzcdhk4rSJTwUeCwZdQbCHWfUZu2nkryWbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm41zoVan.1/ysakay@gmail.com
-p z
-ftime 1
-a 1


that's my bat file. ı have some problems.

- i can't see on nanopool when i check my adress. I started 30 min ago.
- on the miner Windows, all gpus and fans are 0.
- cannot convert blob data
how can i fix this? i have 6 rx 480 and i get 4200 h/s.

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe
-o ssl://xmr-eu1.nanopool.org:14433
-u 437gzZXn343Bc9kaxG4mzriUzcdhk4rSJTwUeCwZdQbCHWfUZu2nkryWbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm41zoVan.1/ysakay@gmail.com <<<<<< fix this
-p z
-ftime 1
-a 1


that's my bat file. ı have some problems.

- i can't see on nanopool when i check my adress. I started 30 min ago.
- on the miner Windows, all gpus and fans are 0.
- cannot convert blob data
how can i fix this? i have 6 rx 480 and i get 4200 h/s.

[notbatman]

Does this have support for NVidia graphics cards? I'm having trouble finding the answer as the original read me says its AMD specific.
Also is it compatible with Ubuntu 16.04?

Thanks a ton in advance

No and no, I'm currently trying to compile wolf's miner on Ubuntu but it's AMD only.



edit:

Somebody told me this works under Ubuntu for NVIDIA cards. -- https://github.com/tsiv/ccminer-cryptonight/

[CrayjeksAjek]

Would this be a correct bat file for mining to XMR wallet?

Set GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner -o stratum+tcp://monerohash.com:7777 -u 46vuJWUvqsHiqsMsheewpjKBKhKBRyqB72z7HWFiRff8GrghAha7wUPQcawxAcuUEiDX5s6K31fu5Rd gpr8UrUmB8CpBVwh -p x

I have tried finding some threads on the subject. I get confused when it starts talking about base IDs and integrated addresses. I wanted to mine directly to bittrex but am confused how to do any of this.

[KOVIC]

Hey guys, 
What about this:

Share rejected (266 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}

Normal mining but sometimes show this error. 

[vydelek]

Clay please FAN!

NO FAN  in DRIVER BETA AMD 4xx and 5xx

Thanks

[KOVIC]

Clay please FAN!

NO FAN  in DRIVER BETA AMD 4xx and 5xx

Thanks

hey bro, you get this error "share rejected - low dificuylty" ? clocks? gpu model?

[nadrojcote]

Is it possible when mining with minexmr.com to set a static difficulty setting? It keeps increasing it to the point that I only get a share every 5 minutes or so.

[notbatman]

I'm changing -mvddc setting which is supposed to be memory voltage, but for some reason I think it changes my GPU core voltage. I can see under GPU-Z / Sensors / VDDC value change to reflect -mvddc value I put it.

Using RX470 4GB.

Is Claymore -mvdcc command actually hanging GPU core voltage or is GPU-Z reporting memory voltage instead of core voltage?

Neither, haha. That command does nothing, Jack shit.

If anything, Claymore's miner is actually setting VDDC instead.

His software is very mysterious!

In other news I dusted off your old cryptonote miner (https://github.com/OhGodAPet/wolf-xmr-miner) and got it compiled under Ubuntu 16.04, it works good as new; my stock RX480s are getting 630 H/s @ 150W.


edit:

I tested a stock RX460 and it gets 300 H/s @ 45W.

edit2:

NVIDIA GeForce GTX 1080 SC gets 517 H/s @ 300W (ccminer). <--- LOL!!!




edit3:

I'd also like to confirm that wolf's miner does support CPU mining and dual CPU+GPU mining.