Claymore's CryptoNote AMD GPU Miner v11.3

[baga105]

Hey

I have a  with Rx 470/480 and this miner.. The fans are going from 0%-100% from time to time, and i can not fix this issue..

Any recomendations? I tried to set the fans on manual, but they still go crazy...

[notbatman]

Hey

I have a  with Rx 470/480 and this miner.. The fans are going from 0%-100% from time to time, and i can not fix this issue..

Any recomendations? I tried to set the fans on manual, but they still go crazy...

Readme!!!.txt <--- you can manually set the fan speed.

[Swiped]

I could use some some suggestions on settings.  This is proving to be very unstable for me at the settings I am trying.  memclock at 2020, mempower at 920 mV, coreclock at 1150 and corepower at 900 and most of my machines trip out over a 5 hour period.  Any thoughts?  thanks

[Swiped]

FYI i am running all Sapphire rx 480 8g cards with modd'd bios with Samsung memory

[notbatman]

I run my fans at 100% (-tt 30) and use the stock settings. I don't have any issues and power consumption seems good.

[Munhenhos]

I have a rig with a 6xRX480 Asus.
I am with a dag driver.
Gore clock is 1160.
Mem clock is 2020.
The speed is 4511 h/s.

Is this ok or a need to change something to have a better performance?

seems above average. maybe you can lower core clock a bit to save some power.

[baga105]

Hey

I have a  with Rx 470/480 and this miner.. The fans are going from 0%-100% from time to time, and i can not fix this issue..

Any recomendations? I tried to set the fans on manual, but they still go crazy...

Readme!!!.txt <--- you can manually set the fan speed.

Thanks my friend.. I will try it today and see if it works!

[Swiped]

I run my fans at 100% (-tt 30) and use the stock settings. I don't have any issues and power consumption seems good.

Thanks, I tried this and 18 of 20 rigs tripped out in 4 hours.  I believe I am coming to the conclusion that this is just a God-awful miner in desperate need of an update.  I can't get anything to run stable, from stock settings to settings similar to my ETH set ups.  Nothing will run longer than 6 hours.  I'll keep playing with it but I am very disappointed in this miner.  Claymore miners tend to be more capable.  Time to look for something more reliable that can run on a Windows 10 platform and perhaps an update from Claymore will be sooner than later.

[notbatman]

I got my RX 550 4GB running under windows however it doesn't work on Claymore's miner.

Using wolf's miner I'm getting 275 H/s @ 25W.



Mining ETH&DCR on Claymore's miner 9.8 I'm getting 9 MH/s ETH & 90 MH/s DCR @ 45W.




edit:

I was surprised to find that Windows 10 didn't complain or ask for a key when I swapped out my mainboard.

[scattogram]

So, I am exploring my options for mining Monero. Can people please confirm that Claymore's last Linux version is 9.1? If so it would also mean that we're still paying 2.5% DevFee, wouldn't it?

[gOCe]

So, I am exploring my options for mining Monero. Can people please confirm that Claymore's last Linux version is 9.1? If so it would also mean that we're still paying 2.5% DevFee, wouldn't it?

Yes
And yes

[scattogram]

So, I am exploring my options for mining Monero. Can people please confirm that Claymore's last Linux version is 9.1? If so it would also mean that we're still paying 2.5% DevFee, wouldn't it?

Yes
And yes

Aha.
That's nice.

[notbatman]

So, I am exploring my options for mining Monero. Can people please confirm that Claymore's last Linux version is 9.1? If so it would also mean that we're still paying 2.5% DevFee, wouldn't it?

Yes
And yes

Aha.
That's nice.

Use wolf's XMR miner "Gateless Gate v0.1.3-pre3" until we see some updates.

[nadrojcote]

How long should the dev fee run for? This morning I noticed its running for 10 minutes.

[nadrojcote]

I have a rig with a 6xRX480 Asus.
I am with a dag driver.
Gore clock is 1160.
Mem clock is 2020.
The speed is 4511 h/s.

Is this ok or a need to change something to have a better performance?

This sounds right, my rx 480 gets about 750 h/s so if you x that by 6 it would be 4500. Monero mining uses a lot less power than ether dual mining which is nice. More stable too.

[BitJunkie556]

I have a rig with a 6xRX480 Asus.
I am with a dag driver.
Gore clock is 1160.
Mem clock is 2020.
The speed is 4511 h/s.

Is this ok or a need to change something to have a better performance?

This sounds right, my rx 480 gets about 750 h/s so if you x that by 6 it would be 4500. Monero mining uses a lot less power than ether dual mining which is nice. More stable too.

Which driver version you using for your 480's? I'm using 16.12.2 like for Zcash, but seems like people are getting higher hashrates, though I don't know what driver version they're running.

[Ursul0]

please beware that there're could be occasional fan jumps to 100%. for rx4 cards use 16.11.4 driver it will fix the fan issues
if you want to get stable performance, no dev fee and higher than claymore's 9.7 hashrate use sgminer (I personally like this one: https://bitcointalk.org/index.php?topic=1716584.0)

[nadrojcote]

Just checked again because my hashrate on pool was much lower than it should be. I feel like claymore is taking a large chunk of my hashrate with his devfee.

[Nassim]

Anyone noticed performance drop after reboot?

Was getting around 780 h/s by card (RX580), after reboot i'm getting 700 h/s by card.
Same config, volatge, OC, driver ...etc

[nadrojcote]

please beware that there're could be occasional fan jumps to 100%. for rx4 cards use 16.11.4 driver it will fix the fan issues
if you want to get stable performance, no dev fee and higher than claymore's 9.7 hashrate use sgminer (I personally like this one: https://bitcointalk.org/index.php?topic=1716584.0)

I just tried it with an rx 480 and r9 280. I get 200 h/s less than claymore. 1100h/s with that version and 1300 with claymore.

Also no fan issues with claymore for me on this machine, my other 5x rx 570/580 rig or my 1060 rig.