Claymore's CryptoNote AMD GPU Miner v11.3

[notbatman]

Thanks for the nicehash support update , its working as it should now , overall diff from 9.7 is about 4% same settings for me ( 9.7 - 754 , 10.2 - 784 ) at 1167/1940 core/mem 880mv on xfx rx 470 4gb elpida , eth bios settings edit , maybe if I loosen timings will get more , monero do not like tight timings as much as speed. Power consumption is reduces in 10.2 about 25% ( 9.7 - 64w , 10.2- 51w ). My settings for 10.2 are -h 928 , I'm with 32 gigs of ram , 1gb virtual , do not see ram consumption increase more , no errors about virtual memory , will try with 4gb virtual memory whether have difference or not.

Actually monero like tight timings. Using ubermix 3.1 on my rx 480 8GB.

XMR stak gives 950h/s, claymore 1000+ h/s per card but + 50 watts overall from the wall.
Ram usage normal, about 22% load. 22 gb page file + 8GB RAM.

How you achieved these speeds? Maybe any tuning of miners settings needed?
On my 580 8Gb on XMR stak(intens 1000) - 725, on Claymore (h 1800 dmem 1) - 840.

I think you need a Hynix card with mining straps running at 2250 and you can go over 1k H/s.

A warning on cheap Hynix cards however, don't go there. You'll end up in RMA hell or forced to run at stock speeds.

[SmileyBob]

I think you need a Hynix card with mining straps running at 2250 and you can go over 1k H/s.

A warning on cheap Hynix cards however, don't go there. You'll end up in RMA hell or forced to run at stock speeds.

A few years ago amd released the R9 280x which is a 7970 with overclocked core and ram speeds in the card bios...
I love to buy these because they mine almost as much as a 380x or 470, as long as you do not factor the electricity cost.

We miners love to overclock, but overclocking the R9 280x - 7970 to the limit also is a don't go there.

The 280x were so often poorly made with cheap chinese knockoff of capacitors (all gigabyte with 3 fans,
some msi and xfx) and bad heatsinks that keep the heat on the ram or voltage regulators (diamond, msi, xfx)

These cards when overclocked at 1011 mhz use 1.2v instead of 1.05v, often locked in the bios;
the capacitors and voltage regulators overheat easily if the fans are under 80%-100%

Think about the gains vs loss of overclocking too much... after all it's your money.

[UnclWish]

Thanks for the nicehash support update , its working as it should now , overall diff from 9.7 is about 4% same settings for me ( 9.7 - 754 , 10.2 - 784 ) at 1167/1940 core/mem 880mv on xfx rx 470 4gb elpida , eth bios settings edit , maybe if I loosen timings will get more , monero do not like tight timings as much as speed. Power consumption is reduces in 10.2 about 25% ( 9.7 - 64w , 10.2- 51w ). My settings for 10.2 are -h 928 , I'm with 32 gigs of ram , 1gb virtual , do not see ram consumption increase more , no errors about virtual memory , will try with 4gb virtual memory whether have difference or not.

Actually monero like tight timings. Using ubermix 3.1 on my rx 480 8GB.

XMR stak gives 950h/s, claymore 1000+ h/s per card but + 50 watts overall from the wall.
Ram usage normal, about 22% load. 22 gb page file + 8GB RAM.

How you achieved these speeds? Maybe any tuning of miners settings needed?
On my 580 8Gb on XMR stak(intens 1000) - 725, on Claymore (h 1800 dmem 1) - 840.

I think you need a Hynix card with mining straps running at 2250 and you can go over 1k H/s.

A warning on cheap Hynix cards however, don't go there. You'll end up in RMA hell or forced to run at stock speeds.

My 580 is hynix memory with modded straps for ethereum. On eth i have 30M. But on XMR with 1350/2200 i have only 840-850 h/s. Whats wrong?

[Nooby-miner]

Is there an optimized version for AMD RX64 Vega?

[cvsea]

Wolf0 congrats, people says your miner is faster than Claymore!

Meh, it is in some cases, but only a bit. If I wanted to have a contest, I wouldn't hand the competitor my entry, duh.

Are you share your miner version?

Wolf0 miner is opensource, meaning the code is free; so anyone could make it faster or do whatever they want with it.

miner is opensource, but he has a fancy kernel that works only for $$$

Nope. I don't plan on selling/releasing any CN code - at least atm.

what's the point of being good/best if nobody knows about it?
I'm sure you have a goddamnly good optimised kernel and you keeping it just for yourself

If I want to compete, I will.

You don't need to do anything. Your public kernel is still the fastest one available. You win  .

Version 10 of this miner shows speed gain but the pool tells a different story. No improvement whatsoever from 9.7 poolside.

[UnclWish]

Owners of 580 8Gb, please share your results on XMR Claymore 10.2... I tried 1380/2250 and recieve only 865 h/s.

[treanski]

Thanks for the nicehash support update , its working as it should now , overall diff from 9.7 is about 4% same settings for me ( 9.7 - 754 , 10.2 - 784 ) at 1167/1940 core/mem 880mv on xfx rx 470 4gb elpida , eth bios settings edit , maybe if I loosen timings will get more , monero do not like tight timings as much as speed. Power consumption is reduces in 10.2 about 25% ( 9.7 - 64w , 10.2- 51w ). My settings for 10.2 are -h 928 , I'm with 32 gigs of ram , 1gb virtual , do not see ram consumption increase more , no errors about virtual memory , will try with 4gb virtual memory whether have difference or not.

Actually monero like tight timings. Using ubermix 3.1 on my rx 480 8GB.

XMR stak gives 950h/s, claymore 1000+ h/s per card but + 50 watts overall from the wall.
Ram usage normal, about 22% load. 22 gb page file + 8GB RAM.

How you achieved these speeds? Maybe any tuning of miners settings needed?
On my 580 8Gb on XMR stak(intens 1000) - 725, on Claymore (h 1800 dmem 1) - 840.

I think you need a Hynix card with mining straps running at 2250 and you can go over 1k H/s.

A warning on cheap Hynix cards however, don't go there. You'll end up in RMA hell or forced to run at stock speeds.

My 580 is hynix memory with modded straps for ethereum. On eth i have 30M. But on XMR with 1350/2200 i have only 840-850 h/s. Whats wrong?

probably crap straps / miner settings...i have 920h/s with 1130/2100 with sgminer

[UnclWish]

Thanks for the nicehash support update , its working as it should now , overall diff from 9.7 is about 4% same settings for me ( 9.7 - 754 , 10.2 - 784 ) at 1167/1940 core/mem 880mv on xfx rx 470 4gb elpida , eth bios settings edit , maybe if I loosen timings will get more , monero do not like tight timings as much as speed. Power consumption is reduces in 10.2 about 25% ( 9.7 - 64w , 10.2- 51w ). My settings for 10.2 are -h 928 , I'm with 32 gigs of ram , 1gb virtual , do not see ram consumption increase more , no errors about virtual memory , will try with 4gb virtual memory whether have difference or not.

Actually monero like tight timings. Using ubermix 3.1 on my rx 480 8GB.

XMR stak gives 950h/s, claymore 1000+ h/s per card but + 50 watts overall from the wall.
Ram usage normal, about 22% load. 22 gb page file + 8GB RAM.

How you achieved these speeds? Maybe any tuning of miners settings needed?
On my 580 8Gb on XMR stak(intens 1000) - 725, on Claymore (h 1800 dmem 1) - 840.

I think you need a Hynix card with mining straps running at 2250 and you can go over 1k H/s.

A warning on cheap Hynix cards however, don't go there. You'll end up in RMA hell or forced to run at stock speeds.

My 580 is hynix memory with modded straps for ethereum. On eth i have 30M. But on XMR with 1350/2200 i have only 840-850 h/s. Whats wrong?

probably crap straps / miner settings...i have 920h/s with 1130/2100 with sgminer

What settings for sgminer you use? Intencity, worksize, gpu threads?

[ultralord]

I have RX 480 8GB with power strap called UBER MIX 3.1 in 1750 and 2000. This only for samsung chips. My clocks are 1350/1990. Intensity 2000 worksize 7. If you have hynix u can try flash uber mix from samsung, I see some people do that and have succses.

lolwut

what hashrates are you getting?

[ghironet]

Hello guys,
with the 10.1 I can see lower reported hashrate on the poolside but from the CM I can see a little increase. Is there somebody else experiencing this issue?

Thanks!

[Spill]

Hi Claymore,  any chance you can make this compatible with minergate's  email address pool, like 9.7 was i'm tired of making different
blockchain wallets .

[garytheasshole]

Hi Claymore,  any chance you can make this compatible with minergate's  email address pool, like 9.7 was i'm tired of making different
blockchain wallets .

They skim hashes and eat babies, shady fuckers, choose a more sane pool.

[Hurtman]

Hi Claymore,  any chance you can make this compatible with minergate's  email address pool, like 9.7 was i'm tired of making different
blockchain wallets .

work fine

[Hurtman]

Hi Claymore,  any chance you can make this compatible with minergate's  email address pool, like 9.7 was i'm tired of making different
blockchain wallets .

They skim hashes and eat babies, shady fuckers, choose a more sane pool.

LOL!!!

[FFI2013]

I have a few msi rx470 8gb micron memory 1850/1150 the higher the h the slower it goes for exp claymore sets it auto at 1800 I get 300 i tried 1500 I get 500 if I set it at 900 I get 630 which is the highest I can get them 1750 straps which happens to be the highest I get my msi rx470 4gb every time I try hight than 1850 clock they crash

[Jackkyy]

Whats your HashRate with Vega
i see only with rx 480 / rx 580

Thanks

[Kumic]

Wolf0 congrats, people says your miner is faster than Claymore!

Meh, it is in some cases, but only a bit. If I wanted to have a contest, I wouldn't hand the competitor my entry, duh.

Are you share your miner version?

Wolf0 miner is opensource, meaning the code is free; so anyone could make it faster or do whatever they want with it.

miner is opensource, but he has a fancy kernel that works only for $$$

Nope. I don't plan on selling/releasing any CN code - at least atm.

what's the point of being good/best if nobody knows about it?
I'm sure you have a goddamnly good optimised kernel and you keeping it just for yourself

Maybe he has a big mine with lots of rigs and with the faster miner, he has an advantage. In another word, he is earning money with his skills.

[MikeHenderson]

Wolf0 congrats, people says your miner is faster than Claymore!

Meh, it is in some cases, but only a bit. If I wanted to have a contest, I wouldn't hand the competitor my entry, duh.

Are you share your miner version?

My public one is on Github! Or in SGMiner-GM.

Hey wolf, thank you for all your work.  Have you done any testing with the vega frontier?  Any clue of optimal settings?  4 threads possible/better?

[candymonkey]

I haven't installed the blockchain drivers yet what is the comparison from what some ppl say you only gain a few mh but uses more power is this true just asking I"m thinking of switching also what gpu utilities work best

[Grinner888]

Hi, has anyone encountered the cannot find block data/cannot convert blob data error? has anyone experienced the GPU0 is mining significantly slower than the other GPUs in multi GPU setup? using 10.1 miner with AMD blockchain drivers on RX470. will appreciate any feedback.