Claymore's CryptoNote AMD GPU Miner v11.3

[invicta]

some bad juju on the 370 in slot with display dummy.
Got 4 more of 470 on the same platform - doing just fine, but this one produces rejects 1/4 of the time.

This has been done to death by me and many others.

Pitcairn core (HD7850, R9 270/X, 370/X) is broken on Claymore 10.2 Beta. Run 9.7 or remove that Pitcairn card from your rig and run 10.2 on the Ellesmere RX cards only. If I were in your position I would do the latter as 10.2 is faster, cooler and uses less power than 9.7.

I would use SGminer or STAK but don't have the patience as I've heard it needs a lot of setting up.

[lpedretti]

GPU 3, GpuMiner dk2a failed -4

3 of my 6 gpus rig always throw me this error, but the specific gpu changes with each restart

Any clues?

[lpedretti]

GPU 3, GpuMiner dk2a failed -4

3 of my 6 gpus rig always throw me this error, but the specific gpu changes with each restart

Any clues?

Found the problem, i needed to raise windows virtual memory

[Ursul0]

some bad juju on the 370 in slot with display dummy.
Got 4 more of 470 on the same platform - doing just fine, but this one produces rejects 1/4 of the time.

This has been done to death by me and many others.

Pitcairn core (HD7850, R9 270/X, 370/X) is broken on Claymore 10.2 Beta. Run 9.7 or remove that Pitcairn card from your rig and run 10.2 on the Ellesmere RX cards only. If I were in your position I would do the latter as 10.2 is faster, cooler and uses less power than 9.7.

I would use SGminer or STAK but don't have the patience as I've heard it needs a lot of setting up.

Yep, back to running SGminer. no issues for the last 30+ hours: total 3 hw errors and below 3% rejects... with higher hash and 0 devfee:)

[jblewis85]

Hello,

Im mining Some electronium but i am getting Low hashrate on my rx 580 8gb cards. My 570 4gb and 580 4gb cards get ~700m/h. The 8gb cards a get ~350 mh? Not sure why this is. All card have bios mod for ether mining. I set my vram to 50000. I was trying to clock the cards one by one with claymore but it does not seem to take the mclock a ccclock. Cryptonote seems much laggy and slower to start mining on all cards then ether as well.

start.bat below nothing in config.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool electroneum.hashparty.io:5555 -xwal etnkGQeNyQ3aJ3iypn7mR1iu4HbTqpfQvMGQvYsVUHnG3pRxEv5xyyJ7jvErPYjFNBVQXah6eae8fdq ckYYExGwH7Bw9XMHkng -xpsw x  -nofee 0 -ftime 10 -h 0 -dmem -1 -cclock 1150,1380,1150,1366,1366,1150 -mclock 1900,2150,2050,2000,2000,1950

 any thoughts my guess is its something to do with the mem clock being higher on the 8gb cards but it wont accept mods. thanks

[invicta]

some bad juju on the 370 in slot with display dummy.
Got 4 more of 470 on the same platform - doing just fine, but this one produces rejects 1/4 of the time.

This has been done to death by me and many others.

Pitcairn core (HD7850, R9 270/X, 370/X) is broken on Claymore 10.2 Beta. Run 9.7 or remove that Pitcairn card from your rig and run 10.2 on the Ellesmere RX cards only. If I were in your position I would do the latter as 10.2 is faster, cooler and uses less power than 9.7.

I would use SGminer or STAK but don't have the patience as I've heard it needs a lot of setting up.

Yep, back to running SGminer. no issues for the last 30+ hours: total 3 hw errors and below 3% rejects... with higher hash and 0 devfee:)

Do you have the download link and settings for it? I used Claymore as it's convenient and I know it, but I thought SGminer wasn't in development any more, or does that not matter now?

[invicta]

Hello,

Im mining Some electronium but i am getting Low hashrate on my rx 580 8gb cards. My 570 4gb and 580 4gb cards get ~700m/h. The 8gb cards a get ~350 mh? Not sure why this is. All card have bios mod for ether mining. I set my vram to 50000. I was trying to clock the cards one by one with claymore but it does not seem to take the mclock a ccclock. Cryptonote seems much laggy and slower to start mining on all cards then ether as well.

start.bat below nothing in config.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool electroneum.hashparty.io:5555 -xwal etnkGQeNyQ3aJ3iypn7mR1iu4HbTqpfQvMGQvYsVUHnG3pRxEv5xyyJ7jvErPYjFNBVQXah6eae8fdq ckYYExGwH7Bw9XMHkng -xpsw x  -nofee 0 -ftime 10 -h 0 -dmem -1 -cclock 1150,1380,1150,1366,1366,1150 -mclock 1900,2150,2050,2000,2000,1950

 any thoughts my guess is its something to do with the mem clock being higher on the 8gb cards but it wont accept mods. thanks

My cards did this the other day. It was Windows 10, ever thinking it's being helpful, it updated my Beta Blackchain driver to Crimson ReLive 17.7.2 (or similar) and didn't tell me, then yes, my cards became very laggy, slow to initialise and the RX 580 went from 600+ down to 315H/s. I would look there first.

[Ursul0]

some bad juju on the 370 in slot with display dummy.
Got 4 more of 470 on the same platform - doing just fine, but this one produces rejects 1/4 of the time.

This has been done to death by me and many others.

Pitcairn core (HD7850, R9 270/X, 370/X) is broken on Claymore 10.2 Beta. Run 9.7 or remove that Pitcairn card from your rig and run 10.2 on the Ellesmere RX cards only. If I were in your position I would do the latter as 10.2 is faster, cooler and uses less power than 9.7.

I would use SGminer or STAK but don't have the patience as I've heard it needs a lot of setting up.

Yep, back to running SGminer. no issues for the last 30+ hours: total 3 hw errors and below 3% rejects... with higher hash and 0 devfee:)

Do you have the download link and settings for it? I used Claymore as it's convenient and I know it, but I thought SGminer wasn't in development any more, or does that not matter now?

just grab the latest release: https://github.com/genesismining/sgminer-gm/releases
this is what I use for 4*470+1*370

Code:

      "rawintensity": "512,512,512,512,384",
            "worksize": "4,4,4,4,10"

there were no cryptonight improvements for polaris and older cards for a while now... also unreasonable to expect any...

[sir4o]

just grab the latest release: https://github.com/genesismining/sgminer-gm/releases
this is what I use for 4*470+1*370

Code:

      "rawintensity": "512,512,512,512,384",
            "worksize": "4,4,4,4,10"

there were no cryptonight improvements for polaris and older cards for a while now... also unreasonable to expect any...

How much hashes from your 470? I managed to squeeze 800 with 650 rawint and worksize 4.

[invicta]

some bad juju on the 370 in slot with display dummy.
Got 4 more of 470 on the same platform - doing just fine, but this one produces rejects 1/4 of the time.

This has been done to death by me and many others.

Pitcairn core (HD7850, R9 270/X, 370/X) is broken on Claymore 10.2 Beta. Run 9.7 or remove that Pitcairn card from your rig and run 10.2 on the Ellesmere RX cards only. If I were in your position I would do the latter as 10.2 is faster, cooler and uses less power than 9.7.

I would use SGminer or STAK but don't have the patience as I've heard it needs a lot of setting up.

Yep, back to running SGminer. no issues for the last 30+ hours: total 3 hw errors and below 3% rejects... with higher hash and 0 devfee:)

Do you have the download link and settings for it? I used Claymore as it's convenient and I know it, but I thought SGminer wasn't in development any more, or does that not matter now?

just grab the latest release: https://github.com/genesismining/sgminer-gm/releases
this is what I use for 4*470+1*370

Code:

      "rawintensity": "512,512,512,512,384",
            "worksize": "4,4,4,4,10"

there were no cryptonight improvements for polaris and older cards for a while now... also unreasonable to expect any...

Thanks for that - appreciated.

No, I get there won't be improvements for Polaris but occasionally bugs might be worked out or efficiency increased perhaps so that's why it might have bothered me. Also, a lot of people use Polaris still, it's pretty damn efficient and cost-effective.

[fonship]

anyone running this miner stable?

[IojkinKot]

anyone running this miner stable?

Yes, very stable
AMD drivers 17.11.1
http://i98.fastpic.ru/big/2017/1116/aa/a3e944dd3f975b5f1599203aabf8e9aa.png

[lankyman]

Is it necessary to have the 23 rd of August block chain driver installed for Claymore to be unlocked with super-powers?
Is using old 16 series drives fine for Claymore to perform fine?
I use 16.11.1  and i dont see a difference between that version or 17.x.x or 16.12.x
Just a random bunch of questions, thanks

[GRABNGO57]

How do you guys getting 750 or even 800 h/s with RX580 for XMR?
Tried CryptoNote AMD GPU Miner v10.2 with 17.11.1 drivers can't get over 350
The best results I can squeeze from it is 606 h/s on Claymore CryptoNote GPU Miner v9.5 Beta

Thanks.

[garytheasshole]

How do you guys getting 750 or even 800 h/s with RX580 for XMR?
Tried CryptoNote AMD GPU Miner v10.2 with 17.11.1 drivers can't get over 350
The best results I can squeeze from it is 606 h/s on Claymore CryptoNote GPU Miner v9.5 Beta

Thanks.

Gotta flush that BIOS if you want to touch 700-800

[GRABNGO57]

How do you guys getting 750 or even 800 h/s with RX580 for XMR?
Tried CryptoNote AMD GPU Miner v10.2 with 17.11.1 drivers can't get over 350
The best results I can squeeze from it is 606 h/s on Claymore CryptoNote GPU Miner v9.5 Beta

Thanks.

Gotta flush that BIOS if you want to touch 700-800

Do you mean GPU BIOS?

[Spiff637]

How do you guys getting 750 or even 800 h/s with RX580 for XMR?
Tried CryptoNote AMD GPU Miner v10.2 with 17.11.1 drivers can't get over 350
The best results I can squeeze from it is 606 h/s on Claymore CryptoNote GPU Miner v9.5 Beta

Thanks.

Gotta flush that BIOS if you want to touch 700-800

Do you mean GPU BIOS?

What kind of cards do you have?   There are tons of guides out there that detail it step by step and also provide pre-modified bios files.   IE for my cards...

   https://anorak.tech/t/xfx-amd-radeon-rx-580-gtr-8gb-hynix/6802/26

[GRABNGO57]

How do you guys getting 750 or even 800 h/s with RX580 for XMR?
Tried CryptoNote AMD GPU Miner v10.2 with 17.11.1 drivers can't get over 350
The best results I can squeeze from it is 606 h/s on Claymore CryptoNote GPU Miner v9.5 Beta

Thanks.

Gotta flush that BIOS if you want to touch 700-800

Do you mean GPU BIOS?

What kind of cards do you have?   There are tons of guides out there that detail it step by step and also provide pre-modified bios files.   IE for my cards...

   https://anorak.tech/t/xfx-amd-radeon-rx-580-gtr-8gb-hynix/6802/26

SAPPHIRE NITRO+ Radeon RX 580 8GB any point where can I get one for my card?

[dexxa05]

anyone running this miner stable?

Yes, very stable
AMD drivers 17.11.1

Which kind of card do you use ? RX470 ?

[AnCrypto]

anyone running this miner stable?

Yes, very stable
AMD drivers 17.11.1
http://i98.fastpic.ru/big/2017/1116/aa/a3e944dd3f975b5f1599203aabf8e9aa.png

For your RX 470 used 1750 timing to 2000 ? Or what is best option for this very nice results?