Claymore's CryptoNote AMD GPU Miner v11.3

[ps_jb]

Does anyone mine stably on RX 480 8Gb with modded ROM (optimized for ETH, 1150/2150)?

I'm getting 730H/s but in 10 minutes Win 10 gave an error message and miner dies

[1713850211]

1713850211

[1713850211]

1713850211

[1713850211]

1713850211

[1713850211]

1713850211

[abrgeza]

Anyone mining with R9 280X 3G D5 Vapor-X ? Can you give me numbers you get?

570 h/s (downclocked at 1050MHz and downvolted at 1100mV)

[gaah]

Hi Claymore any more speed for polaris cards on this miner?

[nuky]

Hi Claymore,
it would be nice to have a shortcut key ("l"?) to switch the low intensity mode.

Thanks a lot.

[alucard20724]

just for shitz and gigglez.. I've tried this on a couple older cards that are watercooled.  basically they're just cats warmers
AMD 5850 ~160-170 H/s (AMD... cause does anyone really remembers who ATI was?)

next will be a couple 6950, a 6970, and then maybe a couple 5970.

[HashZilla]

just for shitz and gigglez.. I've tried this on a couple older cards that are watercooled.  basically they're just cats warmers
AMD 5850 ~160-170 H/s (AMD... cause does anyone really remembers who ATI was?)

next will be a couple 6950, a 6970, and then maybe a couple 5970.

Yes, I remember ATI.   I met Ho in Toronto.

[fr4nkthetank]

just for shitz and gigglez.. I've tried this on a couple older cards that are watercooled.  basically they're just cats warmers
AMD 5850 ~160-170 H/s (AMD... cause does anyone really remembers who ATI was?)

next will be a couple 6950, a 6970, and then maybe a couple 5970.

hehehe I had a 5870, awesome card.  I remember mining blake with it...xvc i think.  check it out it may be better than monero

[Bakery]

@claymore Please can you check what difference could make 9.7 and 9.6 crash windows but not 9.5. Bugcheck 0x000000ea. Win10 pro 64bit(tried two different builds) 4gb ram, pro-G /w latest bios, 5x 470 sapphire nitro 4gb.

[alexcuibap]

@claymore Please can you check what difference could make 9.7 and 9.6 crash windows but not 9.5. Bugcheck 0x000000ea. Win10 pro 64bit(tried two different builds) 4gb ram, pro-G /w latest bios, 5x 470 sapphire nitro 4gb.

I also got bugcheck memory on claymore 9.7 that make window crash ater running 1-2 hours. Version 9.6 still work well

[KL0nLutiy]

What the hash rate on 380x?

[shadowhlohavec]

claymore are you working on some update, I remember you annouced something weeks ago but still nothing

[icelove]

@claymore Please can you check what difference could make 9.7 and 9.6 crash windows but not 9.5. Bugcheck 0x000000ea. Win10 pro 64bit(tried two different builds) 4gb ram, pro-G /w latest bios, 5x 470 sapphire nitro 4gb.

I also got bugcheck memory on claymore 9.7 that make window crash ater running 1-2 hours. Version 9.6 still work well

me too, 0x000000ea both 9.6&9.7, crash after running 1-2 hours, some time can run more than 24 hours.  win7 64bit with 4GB ram 4*470 & 4* 480

[werdwerdus]

What the hash rate on 380x?

i'm getting around 575 h/s on 380x no OC

[xneoenx]

I started using WOlf0's miner using only the below :-

Threads 2
Rawintensity 504
Worksize 4

Getting around 100% share acceptance running with no downtime, 730 h/s and volts rawn at around 360W -380W for my rx480 4GB with modded straps.

[ffthomas]

claymore are you working on some update, I remember you annouced something weeks ago but still nothing

no performance increase yet. but Claymore did a lot of improvements in v9.7, read the changelog

[Ursul0]

on win10 wolf gpu miner 0.4 hashes much better on rx4 (even more without the devfee) in terms of hash and power consumption.
4*470+370
on claymore: 3310h/s (minus the fee = 3243H/s)
on wolf: 3330h/s, also consider that 370 runs not optimal numbers on wolf and produces 90h/s less on wolf!
also power consumption is 65W more with claymore

[melfice123]

I started using WOlf0's miner using only the below :-

Threads 2
Rawintensity 504
Worksize 4

Getting around 100% share acceptance running with no downtime, 730 h/s and volts rawn at around 360W -380W for my rx480 4GB with modded straps.

Can you share your bat file?

[Ursul0]

I started using WOlf0's miner using only the below :-

Threads 2
Rawintensity 504
Worksize 4

Getting around 100% share acceptance running with no downtime, 730 h/s and volts rawn at around 360W -380W for my rx480 4GB with modded straps.

Can you share your bat file?

config you mean?
#4 is R7 370, it does better in claymore, not sure about the numbers also..

               "index": 3,
               "threads": 2,
               "rawintensity": 504,
               "worksize": 4
            },
            {
               "index": 4,
               "threads": 2,
               "rawintensity": 380,
               "worksize": 10
            },

[melfice123]

I started using WOlf0's miner using only the below :-

Threads 2
Rawintensity 504
Worksize 4

Getting around 100% share acceptance running with no downtime, 730 h/s and volts rawn at around 360W -380W for my rx480 4GB with modded straps.

Can you share your bat file?

config you mean?
#4 is R7 370, it does better in claymore, not sure about the numbers also..

               "index": 3,
               "threads": 2,
               "rawintensity": 504,
               "worksize": 4
            },
            {
               "index": 4,
               "threads": 2,
               "rawintensity": 380,
               "worksize": 10
            },

Yes thanks,

R7 370 in claymore do 430-480 h/s

[woodaxe]

Claymore can you mod the cryptonote miner  so that it will mine Bipcoin     https://bitcointalk.org/index.php?topic=1720595.40