UnclWish
|
|
October 01, 2017, 12:24:13 PM |
|
Thanks for the nicehash support update , its working as it should now , overall diff from 9.7 is about 4% same settings for me ( 9.7 - 754 , 10.2 - 784 ) at 1167/1940 core/mem 880mv on xfx rx 470 4gb elpida , eth bios settings edit , maybe if I loosen timings will get more , monero do not like tight timings as much as speed. Power consumption is reduces in 10.2 about 25% ( 9.7 - 64w , 10.2- 51w ). My settings for 10.2 are -h 928 , I'm with 32 gigs of ram , 1gb virtual , do not see ram consumption increase more , no errors about virtual memory , will try with 4gb virtual memory whether have difference or not.
Actually monero like tight timings. Using ubermix 3.1 on my rx 480 8GB. XMR stak gives 950h/s, claymore 1000+ h/s per card but + 50 watts overall from the wall. Ram usage normal, about 22% load. 22 gb page file + 8GB RAM. How you achieved these speeds? Maybe any tuning of miners settings needed? On my 580 8Gb on XMR stak(intens 1000) - 725, on Claymore (h 1800 dmem 1) - 840. I think you need a Hynix card with mining straps running at 2250 and you can go over 1k H/s. A warning on cheap Hynix cards however, don't go there. You'll end up in RMA hell or forced to run at stock speeds. My 580 is hynix memory with modded straps for ethereum. On eth i have 30M. But on XMR with 1350/2200 i have only 840-850 h/s. Whats wrong? probably crap straps / miner settings...i have 920h/s with 1130/2100 with sgminer What settings for sgminer you use? Intencity, worksize, gpu threads?
|
|
|
|
ultralord
Newbie
Offline
Activity: 29
Merit: 0
|
|
October 01, 2017, 12:33:17 PM |
|
I have RX 480 8GB with power strap called UBER MIX 3.1 in 1750 and 2000. This only for samsung chips. My clocks are 1350/1990. Intensity 2000 worksize 7. If you have hynix u can try flash uber mix from samsung, I see some people do that and have succses.
lolwut what hashrates are you getting?
|
|
|
|
ghironet
Newbie
Offline
Activity: 21
Merit: 0
|
|
October 01, 2017, 02:05:10 PM |
|
Hello guys, with the 10.1 I can see lower reported hashrate on the poolside but from the CM I can see a little increase. Is there somebody else experiencing this issue?
Thanks!
|
|
|
|
Spill
Jr. Member
Offline
Activity: 94
Merit: 5
|
|
October 01, 2017, 02:30:31 PM |
|
Hi Claymore, any chance you can make this compatible with minergate's email address pool, like 9.7 was i'm tired of making different blockchain wallets .
|
|
|
|
garytheasshole
Full Member
Offline
Activity: 406
Merit: 105
Chosŏn Minjujuŭi Inmin Konghwaguk
|
|
October 01, 2017, 02:34:01 PM |
|
Hi Claymore, any chance you can make this compatible with minergate's email address pool, like 9.7 was i'm tired of making different blockchain wallets . They skim hashes and eat babies, shady fuckers, choose a more sane pool.
|
|
|
|
Hurtman
|
|
October 01, 2017, 02:52:09 PM |
|
Hi Claymore, any chance you can make this compatible with minergate's email address pool, like 9.7 was i'm tired of making different blockchain wallets . work fine
|
|
|
|
Hurtman
|
|
October 01, 2017, 02:53:04 PM |
|
Hi Claymore, any chance you can make this compatible with minergate's email address pool, like 9.7 was i'm tired of making different blockchain wallets . They skim hashes and eat babies, shady fuckers, choose a more sane pool. LOL!!!
|
|
|
|
FFI2013
|
|
October 01, 2017, 03:36:52 PM |
|
I have a few msi rx470 8gb micron memory 1850/1150 the higher the h the slower it goes for exp claymore sets it auto at 1800 I get 300 i tried 1500 I get 500 if I set it at 900 I get 630 which is the highest I can get them 1750 straps which happens to be the highest I get my msi rx470 4gb every time I try hight than 1850 clock they crash
|
|
|
|
Jackkyy
|
|
October 01, 2017, 04:21:11 PM |
|
Whats your HashRate with Vega i see only with rx 480 / rx 580 Thanks
|
|
|
|
Kumic
|
|
October 01, 2017, 04:55:49 PM |
|
Wolf0 congrats, people says your miner is faster than Claymore!
Meh, it is in some cases, but only a bit. If I wanted to have a contest, I wouldn't hand the competitor my entry, duh. Are you share your miner version? Wolf0 miner is opensource, meaning the code is free; so anyone could make it faster or do whatever they want with it. miner is opensource, but he has a fancy kernel that works only for $$$ Nope. I don't plan on selling/releasing any CN code - at least atm. what's the point of being good/best if nobody knows about it? I'm sure you have a goddamnly good optimised kernel and you keeping it just for yourself Maybe he has a big mine with lots of rigs and with the faster miner, he has an advantage. In another word, he is earning money with his skills.
|
|
|
|
MikeHenderson
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
October 01, 2017, 06:21:41 PM |
|
Wolf0 congrats, people says your miner is faster than Claymore!
Meh, it is in some cases, but only a bit. If I wanted to have a contest, I wouldn't hand the competitor my entry, duh. Are you share your miner version? My public one is on Github! Or in SGMiner-GM. Hey wolf, thank you for all your work. Have you done any testing with the vega frontier? Any clue of optimal settings? 4 threads possible/better?
|
|
|
|
candymonkey
|
|
October 01, 2017, 06:50:27 PM |
|
I haven't installed the blockchain drivers yet what is the comparison from what some ppl say you only gain a few mh but uses more power is this true just asking I"m thinking of switching also what gpu utilities work best
|
|
|
|
Grinner888
Newbie
Offline
Activity: 20
Merit: 0
|
|
October 01, 2017, 06:54:16 PM |
|
Hi, has anyone encountered the cannot find block data/cannot convert blob data error? has anyone experienced the GPU0 is mining significantly slower than the other GPUs in multi GPU setup? using 10.1 miner with AMD blockchain drivers on RX470. will appreciate any feedback.
|
|
|
|
anadventureisu
Newbie
Offline
Activity: 11
Merit: 0
|
|
October 01, 2017, 07:33:31 PM |
|
Whats your HashRate with Vega i see only with rx 480 / rx 580 Thanks Currently getting 1120 H/s with vega64. Not using the blockchain drivers yet. RAM 1100, GPU 1500.
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
October 01, 2017, 09:54:59 PM |
|
What settings are you using? My Vega 64 is stuck at 980. If I enable 8gb memory it goes down to 570. Really weird. Whats your HashRate with Vega i see only with rx 480 / rx 580 Thanks Currently getting 1120 H/s with vega64. Not using the blockchain drivers yet. RAM 1100, GPU 1500.
|
|
|
|
infojunkiePHD
Newbie
Offline
Activity: 49
Merit: 0
|
|
October 01, 2017, 10:12:04 PM |
|
Claymore - Possible bug.
With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)
I'm using the stock settings (-h 512) on non-overclocked cards. 9.7 did/does not give incorrect shares.
|
|
|
|
ser_ator
Newbie
Offline
Activity: 19
Merit: 0
|
|
October 02, 2017, 08:35:15 AM |
|
Claymore - Possible bug.
With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)
I'm using the stock settings (-h 512) on non-overclocked cards. 9.7 did/does not give incorrect shares.
For me, this miner, for the old cards type 7850(1,2gb), 270(x), 280(x) is totally unusable, unfortunately. 15-30% less hash from clay9.7 version and too manny low diff share. I spend 40 hours of my life trying to install it properly that at least I get at least the same hash rate, but , it's not worth it. 7850 with 1 GB of memory and 7950 remain on clay9.7, the rest on kachur miner
|
|
|
|
CryptoPeter
Newbie
Offline
Activity: 19
Merit: 0
|
|
October 02, 2017, 08:42:34 AM |
|
I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.
On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.
If anyone has gotten higher and have any tips let me know.
Thanks
|
|
|
|
UnclWish
|
|
October 02, 2017, 09:56:31 AM |
|
I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.
On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.
If anyone has gotten higher and have any tips let me know.
Thanks
On my RX 580 8Gb(hynix) 1380/2200 I can reach 840-850 h/s -h 1800 -dmem 1 There is some peoples have 1k+ h/s on 480... I don't know how.
|
|
|
|
doktor83
|
|
October 02, 2017, 10:19:00 AM |
|
I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.
On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.
If anyone has gotten higher and have any tips let me know.
Thanks
On my RX 580 8Gb(hynix) 1380/2200 I can reach 840-850 h/s -h 1800 -dmem 1 There is some peoples have 1k+ h/s on 480... I don't know how. with ubermix 3.1 straps and samsung mem
|
|
|
|
|