Nexus - Pure SHA3 + CPU/GPU + nPoS + 15 Active Innovations + More to Come

[Namsbreh]

how much will come out with 4gpu 280x 

You should see about 160 Mh/s

how frequently the blocks at that speed

Block an hour average, if your lucky.

[1713589764]

1713589764

[1713589764]

1713589764

[BitSlapper]

Wow, pretty fast
153-154 MHash/s with new miner, 145 with old (idk, maybe TC 15232 better, than 8192...)
Edited config there: http://puu.sh/gCU35/552003eab7.conf

   "auto-settings" : "false",

This setting helps, THX!

You can do it that way also, to specify your own settings.

Did you try running it with true again after I asked you to?

[COOLERbyPSP]

Did you try running it with true again after I asked you to?

It works, but clocks too high for my 7990  
Oh, i see why my hashrate increased)) 1080/1500   Very risky for that card, my RIG at another location, I can't restart it immediately if it crash)
I see 1000/1500 in 679B.json for Malta card, but clocks increasing to 1080/1500 

[BitSlapper]

Did you try running it with true again after I asked you to?

It works, but clocks too high for my 7990  
Oh, i see why my hashrate increased)) 1080/1500   Very risky for that card, my RIG at another location, I can't restart it immediately if it crash)
I see 1000/1500 in 679B.json for Malta card, but clocks increasing to 1080/1500 

Ahh OK.

Is there a 6798.json for your 7970's/280x ?

You could change those settings to 1000 / 1500 that's probably where the 1080 is.

Of course you would have to enable to auto-settings again to see if it worked.

[COOLERbyPSP]

Is there a 6798.json for your 7970's/280x ?

You could change those settings to 1000 / 1500 that's probably where the 1080 is.

Of course you would have to enable to auto-settings again to see if it worked.

Of course I can change settings in 6798.json file, but why my 7990 with ID 679B taking settings from 6798.json but not from 679B.json?

[BitSlapper]

Is there a 6798.json for your 7970's/280x ?

You could change those settings to 1000 / 1500 that's probably where the 1080 is.

Of course you would have to enable to auto-settings again to see if it worked.

Of course I can change settings in 6798.json file, but why my 7990 with ID 679B taking settings from 6798.json but not from 679B.json?

Most likely the system is treating your 7990 as 2 7970 chips. That's what windows does with a 5970 anyways, treats it as 2 5870's.

So the Device ID comes in as 679B but then the chips are probably reporting there names as Tahiti instead of Malta.

I use both the Device ID and the Device name to configure the settings. OpenCL reports the name of the chip, not the ID. ADL reports the ID.

I'm sure it's an issue related to that somehow. I don't have a 7990 so I wouldn't be able to test it.

The easiest thing is to just let the miner treat it as 2 7970's since thats what Windows and OpenCL want to do anyway.

[Hix]

How compile Cudaminer from sources?

Code:

100:~/skminer/skminer_source$ ./autogen.sh
Makefile.am:16: variable `ccminer_SOURCES' is defined but no program or
Makefile.am:16: library has `ccminer' as canonical name (possible typo)
Makefile.am:34: variable `ccminer_LDADD' is defined but no program or
Makefile.am:34: library has `ccminer' as canonical name (possible typo)
Makefile.am:33: variable `ccminer_LDFLAGS' is defined but no program or
Makefile.am:33: library has `ccminer' as canonical name (possible typo)

[qwep1]

I again did not do so 
conf
{
    "algorithm" : "sk1024_djm",
    "auto-engine" : "false",
    "auto-fan" : "false",
    "auto-settings" : "false",
    "connections" : [
        {
            "password" : "qwep",
            "url" : "127.0.0.1:9325",
            "user" : "1"
        }
    ],
    "gpu-engine" : "1100",
    "gpu-memclock" : "1500",
    "gpu-powertune" : "5",
    "gpu-shaders" : "2048",
    "gpu-threads" : "1",
    "gpu-vddc" : "0",
    "intensity" : "19",
    "lookup-gap" : "2",
    "rawintensity" : "0",
    "submit-stale" : "false",
    "temp-cutoff" : "95",
    "temp-overheat" : "80",
    "temp-target" : "75",
    "thread-concurrency" : "16384",
    "vectors" : "1",
    "worksize" : "256",
    "xintensity" : "0"
}

bat
start resources/ui/SKMinerGUI.html
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
SKMiner.exe --connections 127.0.0.1:9325 user qwep password 1111 --algorithm sk1024_djm
COLOR 0A
pause

Coinshield.conf
listen=1
daemon=1
server=1
rpcuser=qwep
rpcpassword=1111
rpcport=9325
rpcallowip=localhost

[Namsbreh]

I again did not do so 
conf
{
    "algorithm" : "sk1024_djm",
    "auto-engine" : "false",
    "auto-fan" : "false",
    "auto-settings" : "false",
    "connections" : [
        {
            "password" : "qwep",
            "url" : "127.0.0.1:9325",
            "user" : "1"
        }
    ],
    "gpu-engine" : "1100",
    "gpu-memclock" : "1500",
    "gpu-powertune" : "5",
    "gpu-shaders" : "2048",
    "gpu-threads" : "1",
    "gpu-vddc" : "0",
    "intensity" : "19",
    "lookup-gap" : "2",
    "rawintensity" : "0",
    "submit-stale" : "false",
    "temp-cutoff" : "95",
    "temp-overheat" : "80",
    "temp-target" : "75",
    "thread-concurrency" : "16384",
    "vectors" : "1",
    "worksize" : "256",
    "xintensity" : "0"
}

bat
start resources/ui/SKMinerGUI.html
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
SKMiner.exe --connections 127.0.0.1:9325 user qwep password 1111 --algorithm sk1024_djm
COLOR 0A
pause

Coinshield.conf
listen=1
daemon=1
server=1
rpcuser=qwep
rpcpassword=1111
rpcport=9325
rpcallowip=localhost

Your user & pass are muddled up in your skminer conf file.

You don't need a coinshield.conf file, it will work without. 

Try to remove the coinshield.conf
Change the skminer miner.conf , user x, pass x, url 127.0.0.1:9325
Change bat file, remove the --connections, user & --algo bit.  Try starting with just SKminer.exe

[COOLERbyPSP]

Your user & pass are muddled up in your skminer conf file.

You don't need a coinshield.conf file, it will work without. 

Try to remove the coinshield.conf
Change the skminer miner.conf , user x, pass x, url 127.0.0.1:9325
Change bat file, remove the --connections, user & --algo bit.  Try starting with just SKminer.exe

Or try to disable Firewall \ Antivirus

[BitSlapper]

Also make sure your CSD wallet is running and fully synced.

The last line states it's trying to connect to the "server" which right now is your local wallet.

If the miner were running you would see it hashing or at least failing to get the height.

Edit: Also make sure your wallet isn't password protected. You can't solo mine to the wallet if it is.

[cestballot]

http://coinshieldpool.cestballot.fr/ is the new url for cpu pool.

cpu pool informations :
ip : 92.222.190.111
port : 9549

windows miner setting :
coinshield_prime.exe 92.222.190.111 9549 your_address nb-threads

example for start.bat with 10 core CPU :
coinshield_prime.exe 92.222.190.111 9549 2Sxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxfv 10

pool.cestballot.fr point to 92.222.190.111 for miner setting only. official web url for http information and future web ui is now : http://coinshieldpool.cestballot.fr/

Best regards

Cest ballot

Edit : pool min Diff up at 4.0

[CryptoDatabase]

Your coin and it's information has now been added to Crypto Database. It is listed under the C category found here.

If any information is missing or inaccurate please let me know via private message or by posting on my thread found here.

Regards,
Crypto Database
http://cryptodatabase.net

[cbuchner1]

do we have an ETA for a v1.0.3 wallet release?

Christian

[cestballot]

http://coinshieldpool.cestballot.fr/

Task Type : Maintenance
status : Done

wallet crach with 1100+ request/s at 3.9 min diff

Edit 1: pool wallet is stuck
Edit 2: corrupted database bug we have to resync wallet ...
Edit 3: sync start... (with speed sync software ) done
Edit 4: we uplowd new safe database ( 40 minutes uplowd time) done

Pool up

Coinshield database : http://www.cestballot.fr/downn/coinshield/blkindex20150318.zip
you can have fast sync for your new wallet. Pool wallet full sync in 5 minutes.

I'll upload update for this files all month.

Best regards

Cest Ballot

[macorcina]

It's something wrong with payout, from pool 92.222.190.111  ?
Height = 203979 | Balance: 18.024687 CSD | Payout: 0.000000 CSD

[MeGaDoOm]

It's something wrong with payout, from pool 92.222.190.111  ?
Height = 203979 | Balance: 18.024687 CSD | Payout: 0.000000 CSD

same here, I have a 16 csd stuck balance.
it's happened before, i'm sure the dev figures it out soon :-)

[cestballot]

It's something wrong with payout, from pool 92.222.190.111  ?
Height = 203979 | Balance: 18.024687 CSD | Payout: 0.000000 CSD

same here, I have a 16 csd stuck balance.
it's happened before, i'm sure the dev figures it out soon :-)

http://coinshieldpool.cestballot.fr/ News:



After 4h down, pool restart and found some block with low diff (5.6), now diff is more like 6.3.

no block found, no payout :/

all is normal. pool works good. your csd balance are save.

Pool min diff is temporarily set at 4.0 to be sure all works good and to prepares server for GPU pool. Diff will be set at 3.7 in one day if all is good.

I'm realy sorry about this service interruption.

we add this Coinshield database : http://www.cestballot.fr/downn/coinshield/blkindex20150318.zip for fast sync your new wallet


Best regards

Cest Ballot

[Videlicet]

Payouts go out when you get enough priority for your balance, so basically your balance will compound until large enough to be the priority payout to get on the block. This is dependent on your hashing power how often you will get the payout.

Thank You,
Viz.

[AliMan]

I think what these guys are saying that if you could decrease the automatic payout amount from the pool?

I remember first it used to payout when the total balance was 3-5 CSD, then it became 10-15 CSD, now at 20 CSD, I'm not sure if we're getting our payouts the same way.