Bitcoin Forum
September 26, 2017, 09:18:53 PM *
News: Latest stable version of Bitcoin Core: 0.15.0.1  [Torrent]. (New!)
 
   Home   Help Search Donate Login Register  
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [All]
  Print  
Author Topic: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers  (Read 88826 times)
djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 19, 2014, 08:07:26 PM
#1

Hi,

I have released a version of sgminer which allows to mine X11 and X13 coins using 14.6 amd drivers.

As it has been noticed some times ago, with 14.6 drivers almost double the hashrate of groestl algorithm and substantially increases the hashrate of any algo using groestl such as X11, X13, Nist5 (talkcoin).

However with 14.6 drivers some algos (in particular X11 and X13) stopped working completely.
This release fix the problem. This release is based on lasybear sgminer release.

You can find the source at:  https://github.com/djm34/sph-sgminer_x11mod
windows binaries at:  https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg


This version supports these kernels (and some others... but need to be checked though)

* X11mod  (-k x11mod)
* X13mod   (-k x13mod)
* Nist5      (-k nist5)   (talkcoin)
* Quark coins (-k quarkcoin)
* Animecoin (-k animecoin )

I didn't modify the original marucoin and darkcoin kernel are they are slower and some improvement on the quark/anime kernel should be expected soon)

In terms of speed, it was tested so far only on my R9 290x:
With X11mod, I get 5.4MHash/s
With X13mod, I get 3.75MHash/s  (which is not terrible compared to nvidia cards)
With Nist5, I get 15.8MHash/s (more details can be found on talkcoin thread)

If you find this work useful please donate at these addresses:  

BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p
DRK: XpeLYbqdqdC6FM51EPT1XsfXRG8TLqXEbe





djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
1506460733
Hero Member
*
Offline Offline

Posts: 1506460733

View Profile Personal Message (Offline)

Ignore
1506460733
Reply with quote  #2

1506460733
Report to moderator
1506460733
Hero Member
*
Offline Offline

Posts: 1506460733

View Profile Personal Message (Offline)

Ignore
1506460733
Reply with quote  #2

1506460733
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 19, 2014, 08:36:32 PM
#2

sorry wrong thread...  Grin

djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
kqpahv
Full Member
***
Offline Offline

Activity: 231


View Profile
June 19, 2014, 10:18:04 PM
#3

Great work man  Wink Even though I am not fan of x11 or x13 it's still great to see improvements made to AMD miners  Wink


A R9 280x gets the following numbers:

x11 - 4.05Mhash @ 1080Mhz
x13 - 2.9Mhash  @ 1080Mhz


Energy consumption seems to be the same as before: ~90W per card @ 1020Mhz/ 0.9Mv.
minerpools
Hero Member
*****
Offline Offline

Activity: 560


( ͡į ͜ʖ ͡į)


View Profile WWW
June 19, 2014, 10:36:30 PM
#4

Awesome! I'm updating drivers on my rigs. Thanks man!

http://www.minerpools.com

@minerpools on twitter - Follow me for updates on new coins and pools. #minerpools at freenode
captainbluff
Sr. Member
****
Offline Offline

Activity: 335


View Profile
June 19, 2014, 10:40:26 PM
#5

Has anyone checked for any hidden hash redirect?
vindyne8
Legendary
*
Offline Offline

Activity: 1148



View Profile
June 19, 2014, 11:09:30 PM
#6

Hrmm. Constant spam of cards going idle, waiting for work from pools, work resuming. i am sure I am doing something wrong, I usually am, anyone else having this issue?
captainbluff
Sr. Member
****
Offline Offline

Activity: 335


View Profile
June 19, 2014, 11:37:19 PM
#7

Hrmm. Constant spam of cards going idle, waiting for work from pools, work resuming. i am sure I am doing something wrong, I usually am, anyone else having this issue?

Yep I get the same messages.
minerpools
Hero Member
*****
Offline Offline

Activity: 560


( ͡į ͜ʖ ͡į)


View Profile WWW
June 19, 2014, 11:47:28 PM
#8

I can confirm they're working (compiled on a modified version of linux), I'm getting 3.8mh for each 280x. It rose from 2.1mh...
Amazing work man!

http://www.minerpools.com

@minerpools on twitter - Follow me for updates on new coins and pools. #minerpools at freenode
vindyne8
Legendary
*
Offline Offline

Activity: 1148



View Profile
June 19, 2014, 11:50:32 PM
#9

I can confirm they're working (compiled on a modified version of linux), I'm getting 3.8mh for each 280x. It rose from 2.1mh...
Amazing work man!

Absolutely big hash rate increase. I just need to figure out the work stop/start thing and should be good to go. If I do figure it out, will post it.
captainbluff
Sr. Member
****
Offline Offline

Activity: 335


View Profile
June 20, 2014, 12:58:38 AM
#10

Has anyone checked for any hidden hash redirect?

Anyone???
sling00
Newbie
*
Offline Offline

Activity: 11


View Profile
June 20, 2014, 02:16:46 AM
#11

Could you post settings for 280x/290 or 290x? Trying my settings that worked well on the original mod miner, not working well on this one.
ShaDou
Member
**
Offline Offline

Activity: 64


View Profile
June 20, 2014, 02:37:34 AM
#12

run perfect on my rig.thanks for ur great work.
charmees
Jr. Member
*
Offline Offline

Activity: 39


View Profile
June 20, 2014, 05:29:54 AM
#13

is this suppose to have any increase in mining speed also?

r9 270 still getting ~1600kh on x13
                         ~2070kh on x11
same as with previous sgminers
marklin
Member
**
Offline Offline

Activity: 119

i do


View Profile
June 20, 2014, 07:16:42 AM
#14

6xxxand5xxx?

kozmos
Sr. Member
****
Offline Offline

Activity: 379


View Profile
June 20, 2014, 08:30:55 AM
#15

@djm34

Thank you a lot for this great sgminer  Smiley

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ


I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalk.org/index.php?topic=658975.msg7412560#msg7412560
Kablam
Jr. Member
*
Offline Offline

Activity: 33


View Profile
June 20, 2014, 09:18:41 AM
#16

@kozmos

sounds great that you fixed it can you let us know what you did or just add the fix it to the github repository so linux users like me can get it running? Wink

thx

Kablam
Kablam
Jr. Member
*
Offline Offline

Activity: 33


View Profile
June 20, 2014, 09:37:42 AM
#17

@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x

ShXnot
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 20, 2014, 09:46:29 AM
#18

hey guys,
anyone care to share setting for 7950 and 280x please
thanks in advance
kozmos
Sr. Member
****
Offline Offline

Activity: 379


View Profile
June 20, 2014, 09:53:44 AM
#19

@kozmos

sounds great that you fixed it can you let us know what you did or just add the fix it to the github repository so linux users like me can get it running? Wink

thx

Kablam
you are welcome Smiley

I did nothing more than adding the latest AMD_APP_SDK 2.9, used the exact github source djm34 mentioned in his first post, recompiled the miner and made sure it supports AMD OpenCL.

kozmos
Sr. Member
****
Offline Offline

Activity: 379


View Profile
June 20, 2014, 09:59:16 AM
#20

hey guys,
anyone care to share setting for 7950 and 280x please
thanks in advance

Try this: http://pastebin.com/4vS1gw8e
Kablam
Jr. Member
*
Offline Offline

Activity: 33


View Profile
June 20, 2014, 10:07:22 AM
#21

@kozmos

ok thx man then i dont have think more about that Wink

runns fine on pimp for me with 14.6 drivers
djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 20, 2014, 10:35:32 AM
#22

@kozmos

sounds great that you fixed it can you let us know what you did or just add the fix it to the github repository so linux users like me can get it running? Wink

thx

Kablam
you are welcome Smiley

I did nothing more than adding the latest AMD_APP_SDK 2.9, used the exact github source djm34 mentioned in his first post, recompiled the miner and made sure it supports AMD OpenCL.

ok thanks, that's certainly mean I need to check my mingw install... (I have installed several other packages for compiling other stuffs, I will have to check that)

djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
kozmos
Sr. Member
****
Offline Offline

Activity: 379


View Profile
June 20, 2014, 10:48:07 AM
#23

@kozmos

sounds great that you fixed it can you let us know what you did or just add the fix it to the github repository so linux users like me can get it running? Wink

thx

Kablam
you are welcome Smiley

I did nothing more than adding the latest AMD_APP_SDK 2.9, used the exact github source djm34 mentioned in his first post, recompiled the miner and made sure it supports AMD OpenCL.

ok thanks, that's certainly mean I need to check my mingw install... (I have installed several other packages for compiling other stuffs, I will have to check that)
Thanks to you in the first place..

btw I noticed something about 14.6bta driver, the GPU and Memory frequencies remain the same (default card's values) whatever you try to play with it via msi afterburner or directly within the miner conf. file.

It is me or is it a general thing with this driver??


Edit: the hashrate is the same at any given GPU/Memery value.
ShXnot
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 20, 2014, 12:31:45 PM
#24

hey guys,
anyone care to share setting for 7950 and 280x please
thanks in advance

Try this: http://pastebin.com/4vS1gw8e
thanks mate  Smiley
dark8011
Jr. Member
*
Offline Offline

Activity: 44


View Profile
June 20, 2014, 12:39:21 PM
#25

will U please come up with a miner which can improve 5xxx/6xxx AMD cards?
thanks a lot
becker
Full Member
***
Offline Offline

Activity: 134


View Profile
June 20, 2014, 12:50:49 PM
#26

Anyone have good 7970 settings tried the 7950, and 280x settings given in the pastebin above, but crashes.
thefrog
Sr. Member
****
Offline Offline

Activity: 364


View Profile
June 20, 2014, 01:19:55 PM
#27

Linux version, build from source, with the Latest beta linux drivers and the modded sph-sgminer, and the latest ADL-SDK work too.

from 3.2 to 4.1 per 280x with same config.

thedeath89
Newbie
*
Offline Offline

Activity: 20


View Profile
June 20, 2014, 02:03:59 PM
#28

this is no use for r9 270/270x , right ?
barryzand
Hero Member
*****
Offline Offline

Activity: 518


Growcoin Developer


View Profile
June 20, 2014, 02:10:40 PM
#29

will U please come up with a miner which can improve 5xxx/6xxx AMD cards?
thanks a lot

big fat +1... Im not getting more hashes then with the lasybear version and the old drivers...

running 10x 5870 and 5x 6950.. would be nice if you can fix one for us  Smiley
oktay50000
Sr. Member
****
Offline Offline

Activity: 378


View Profile
June 20, 2014, 03:22:16 PM
#30

any guide for installing this sgminer  on pimp??

BTC : 1APsSj4vkbRVjtzhfi7ASTPLm8s3p9iRHh  DOGE : DRjdbwit2JX1fEvvtyr4xkVqtAKpP93f8Y
Pelk
Full Member
***
Offline Offline

Activity: 132


View Profile
June 20, 2014, 03:32:15 PM
#31

Working great for me thx to geren27 and djm34 Tongue


Anonymousg64
Sr. Member
****
Offline Offline

Activity: 392


View Profile
June 20, 2014, 09:26:02 PM
#32

crashes gpu driver then pc hangs

2x Powercolor r9 290 PCS+

running windows 7 32bit
AMD APP SDK 2.9
AMD driver 14.6

sgminer.conf
Code:
"intensity" : "19",
"vector" : "2",
"worksize" : "512",
"kernel" : "x13mod",
"lookup-gap" : "0",
"thread-concurrency" : "24550",
"gpu-engine" : "1050, 1030",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "0",
"gpu-threads" : "1",
"gpu-fan" : "100"
fra55
Member
**
Offline Offline

Activity: 105


View Profile
June 20, 2014, 09:51:37 PM
#33

Well man I got a lot of errors with this miner...

1- Failed to resolve Address:Port (never happened before)

2- Getaddrinfo in setup_Stratum_socket<> returned 10109: impossible to find the specified class

3- I can only make one card to work (card n.1, an Asus 280x) and not my card n.0 (Amd 6850), with sphsgminer both cards were working

It seems like the miner does not read my .bat file, which is:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx DISPLAY 0
sgminer -k x11mod -o stratum+tcp://drkpool.com:3333 -u fra55.1 -p x -I 18,17 -w 128,256 -g 1,2 --shaders 960,2048 --no-submit-stale --lookup-gap 2,2

What's wrong? No hashrate increase was noticed
-Blueraiven-
Jr. Member
*
Offline Offline

Activity: 55

Small Miner!!!


View Profile
June 20, 2014, 11:07:09 PM
#34

this is no use for r9 270/270x , right ?

Yes tried it on 270x too.. No increase on hashrate.
shadow3277
Jr. Member
*
Offline Offline

Activity: 56


View Profile
June 20, 2014, 11:10:54 PM
#35

this is no use for r9 270/270x , right ?

Yes tried it on 270x too.. No increase on hashrate.

Are you guys running the 14.6 drivers? I received an increase of +1Mhs on my 270x's running x11.

Minerals: MNgxHNyRZtPVVCroncUBqsyHARzpbSCGU4
fortheson
Member
**
Offline Offline

Activity: 112


View Profile
June 20, 2014, 11:13:22 PM
#36

is this work for 7850?

SolarFox
Member
**
Offline Offline

Activity: 103


View Profile
June 20, 2014, 11:58:41 PM
#37

this is no use for r9 270/270x , right ?

Yes tried it on 270x too.. No increase on hashrate.

No increase in speed at all...  280x
42davidsmith42
Newbie
*
Offline Offline

Activity: 20


View Profile
June 21, 2014, 12:11:42 AM
#38

@kozmos

ok thx man then i dont have think more about that Wink

runns fine on pimp for me with 14.6 drivers

How did you get 14.6 drivers on pimp? I thought the latest only comes with 14.4
Madcat71
Newbie
*
Offline Offline

Activity: 28


View Profile
June 21, 2014, 12:29:41 AM
#39

How did u get it into PiMP, have 2 riggs one win7 with 280Xś and 1 with 4 290ś and PiMP, no problems with the new drivers on win7, but i have no clue how to get it running on Pimp ( latest version 14,4 )


@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x

http://i.imgur.com/fVqLE56.png


lobo13hf
Sr. Member
****
Offline Offline

Activity: 450



View Profile
June 21, 2014, 12:32:39 AM
#40

Can anyone share the settings for 290s non x??? X11/X13...

           ▄▄███████████▄▄
       ▄▄███████████████████▄▄
     ▄███████▀▀       ▀▀███████▄
   ▄██████▀               ▀██████▄
  ▄█████▀          █ █▄     ▀█████▄
 ▄████▀      ▄     ▄███▄      ▀████▄
▄████▀     ▄▀ ▄▀  ▄██████▄     ▀████▄
█████     █▀ █▀ ▄████████▄      █████
████     ██ ██        ▀███ █     ████
████     ██ ██▄         ██ █     ████
████     ██ ▀██▄        █ ▄█     ████
█████    ██▄ ▀███▄    ▄ ▀ ██    █████

▀████▄    ███▄ ▀▀████▀  ▄██▀   ▄████▀
 ▀████▄    ▀███▄▄▄▄▄▄▄▄██▀    ▄████▀

  ▀█████▄    ▀▀███████▀▀    ▄█████▀
   ▀██████▄               ▄██████▀

     ▀███████▄▄       ▄▄███████▀
       ▀▀███████████████████▀▀

           ▀▀███████████▀▀
AIRTOKEN█████
███████
███████
███████
███████
███████
███████
███████
███████
███████
███████
███████
█████
███████
███████
███████
███████
███████
███████
███████
███████
███████
███████
███████
[AirFOX
BROWSER
][AirFOX
RECHARGE
]█████
███████
███████
███████
███████
███████
███████
███████
███████
███████
███████
███████
42davidsmith42
Newbie
*
Offline Offline

Activity: 20


View Profile
June 21, 2014, 12:41:55 AM
#41

How did u get it into PiMP, have 2 riggs one win7 with 280Xś and 1 with 4 290ś and PiMP, no problems with the new drivers on win7, but i have no clue how to get it running on Pimp ( latest version 14,4 )


@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x

http://i.imgur.com/fVqLE56.png




What settings are you running to get 4500kh on a 290? I'm struggling to get 3500.
wmr1988
Jr. Member
*
Offline Offline

Activity: 45


View Profile
June 21, 2014, 02:21:56 AM
#42

Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?
42davidsmith42
Newbie
*
Offline Offline

Activity: 20


View Profile
June 21, 2014, 02:30:27 AM
#43

Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?
wmr1988
Jr. Member
*
Offline Offline

Activity: 45


View Profile
June 21, 2014, 02:58:31 AM
#44

Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?

Wuh Im on windows. I thought the installer just overwrites the files.
MTJ151
Full Member
***
Offline Offline

Activity: 215


View Profile
June 21, 2014, 04:50:24 AM
#45

Well, tried it out on 14.6 driver and was getting accepted shares. Which I was not woth any other version of sgminer with 14.6

However, it appears that there maybe a problem with the drivers because if you check GPU-Z you will notice that the clock speeds don't change meaning you always running on default clocks.
jakecrow
Full Member
***
Offline Offline

Activity: 224


View Profile
June 21, 2014, 05:00:19 AM
#46

So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.

Anyways link here (it's just the bins, don't worry):

https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg

Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.
mika1977
Full Member
***
Offline Offline

Activity: 182



View Profile
June 21, 2014, 07:47:45 AM
#47

this bin for R270 https://dl.dropboxusercontent.com/u/58576741/x11modPitcairnglg2tc8128w256l4.bin work fine with me 40% up

COMSA The ICO Solution for Centralized Businesses to Adopt Blockchain Technologies
▬▬▬▬▬▬▬▬▬▬▬▬▬▌▌  ICO: Oct 2nd until Nov 6th▐▬▬▬▬▬▬▬▬▬▬▬▬▬
■ ■ ■ WebsiteWhitepaperTwitterBlogsRedditFacebook ■  TelegramSlackBitcointalk ■ ■ ■
thefrog
Sr. Member
****
Offline Offline

Activity: 364


View Profile
June 21, 2014, 07:59:51 AM
#48

this is no use for r9 270/270x , right ?

Yes tried it on 270x too.. No increase on hashrate.

No increase in speed at all...  280x

are you sure you run 14.6 (or latest beta on linux ?)

+1MHs / 280x on my side. and Server sees it too.
thefrog
Sr. Member
****
Offline Offline

Activity: 364


View Profile
June 21, 2014, 08:01:43 AM
#49

Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?

Wuh Im on windows. I thought the installer just overwrites the files.

The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 21, 2014, 08:16:10 AM
#50

So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.

Anyways link here (it's just the bins, don't worry):

https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg

Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.

Thanks, will test the bins for x13 7950, should be the same as 280x(256,8192) i think.

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
wmr1988
Jr. Member
*
Offline Offline

Activity: 45


View Profile
June 21, 2014, 08:39:27 AM
#51

Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?

Wuh Im on windows. I thought the installer just overwrites the files.

The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).

Yes I've deleted them. I tried both 14.4 and 14.6 beta but for some strange reason, it gives almost the EXACT hashrate as the last sph-sgminer with x11-mod kernal.

cryptoangel
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 21, 2014, 08:41:36 AM
#52

Weird......

I tried 14.4 AND 14.6 beta on
MSI 7850, on Windows 8.0 - Not a single bit of performance increase vs. sphminer mod

Anyone know what's the problem?

Did you delete and recreate the .bin files?

Wuh Im on windows. I thought the installer just overwrites the files.

The .bin files are created on start of sgminer. you should delete them (I do delete them prior to sgminer start everytime).

Yes I've deleted them. I tried both 14.4 and 14.6 beta but for some strange reason, it gives almost the EXACT hashrate as the last sph-sgminer with x11-mod kernal.



Yeah, I also got no improvement on my 280x.

Walrusbonzo
Hero Member
*****
Offline Offline

Activity: 648


View Profile
June 21, 2014, 08:43:22 AM
#53

Windows 8.1 here with a 7950.

Went from 2.6MH/s to 3.6MH/s.  Grin
-Blueraiven-
Jr. Member
*
Offline Offline

Activity: 55

Small Miner!!!


View Profile
June 21, 2014, 08:44:58 AM
#54

Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?
atp1916
Legendary
*
Offline Offline

Activity: 854



View Profile
June 21, 2014, 08:54:54 AM
#55

Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?

https://litecointalk.org/index.php?topic=11761.0

Link doesn't appear to be working for the 14.6 modded .infs.  Perhaps someone will come along with a mirror.
Dowper
Full Member
***
Offline Offline

Activity: 147


View Profile
June 21, 2014, 08:59:33 AM
#56


2850KH/s with this .bin and 14.4 drivers. 30% improvement for me, with the old miner - 2200KH/s.
cryptoangel
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 21, 2014, 09:06:43 AM
#57

Anyone have a .bin file for HD 6970 currently getting 1.6mhs.

Eastwind
Hero Member
*****
Offline Offline

Activity: 896



View Profile
June 21, 2014, 09:20:28 AM
#58

So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.

Anyways link here (it's just the bins, don't worry):

https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg

Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.

I used this bin and it increase my 7970 card hash rate from 2500 to 3200MH/s.

Is it possible for you to create a X13 bin?
gmerk
Member
**
Offline Offline

Activity: 119


View Profile
June 21, 2014, 09:55:07 AM
#59


This worked for me:
14.4 or previous -> DDU -> 14.6 -> make your .bins (lots of them  Smiley ) -> DDU -> 14.4 -> enjoy...

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...

Yesterday, someone said something about putting 14.6 opencl files (dlls?) in sgminer folder, and then compile the bin files (start sgminer).
I tried a bit, but couldn't figure it out...

barryzand
Hero Member
*****
Offline Offline

Activity: 518


Growcoin Developer


View Profile
June 21, 2014, 10:16:34 AM
#60

I really would like a version wich helps improvement on the HD5xxx and HD6xxx cards....  Roll Eyes
majkel_94
Full Member
***
Offline Offline

Activity: 224


View Profile
June 21, 2014, 10:18:59 AM
#61

I really would like a version wich helps improvement on the HD5xxx and HD6xxx cards....  Roll Eyes
Have you tried installing 14.6 beta drivers and they compiling bins for 5xxx? Wink

I have this cards too but my rig is far far away, so I can't install drivers remote and I'm waiting for Cypress and Juniper bins Tongue
hero18688
Sr. Member
****
Offline Offline

Activity: 392


View Profile
June 21, 2014, 10:25:17 AM
#62

Can you add jackpot coin kernel and tweak it Wink Right now it looks terrible compared to 750ti

nicquehen
Newbie
*
Offline Offline

Activity: 11


View Profile
June 21, 2014, 10:27:42 AM
#63

I would like too for jackpot Smiley
hero18688
Sr. Member
****
Offline Offline

Activity: 392


View Profile
June 21, 2014, 10:43:05 AM
#64

I see waiting and resuming message times with this version.Did you guys  see that?

shadow3277
Jr. Member
*
Offline Offline

Activity: 56


View Profile
June 21, 2014, 10:45:13 AM
#65

I see waiting and resuming message times with this version.Did you guys  see that?


There's a re-compiled version that fixes it.

https://bitcointalk.org/index.php?topic=658975.0

Minerals: MNgxHNyRZtPVVCroncUBqsyHARzpbSCGU4
barryzand
Hero Member
*****
Offline Offline

Activity: 518


Growcoin Developer


View Profile
June 21, 2014, 11:01:24 AM
#66

I really would like a version wich helps improvement on the HD5xxx and HD6xxx cards....  Roll Eyes
Have you tried installing 14.6 beta drivers and they compiling bins for 5xxx? Wink

I have this cards too but my rig is far far away, so I can't install drivers remote and I'm waiting for Cypress and Juniper bins Tongue

already did of course... no increase compared too lasybears version on 14.4
djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 21, 2014, 11:03:18 AM
#67

I would like too for jackpot Smiley
actually I am working on it, however the result isn't that good at the moment.
However using the current jackpot-miner with 14.6 drivers gives already a little boost

by the way I have updated the op with a windows binaries which works correctly.

djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
jakecrow
Full Member
***
Offline Offline

Activity: 224


View Profile
June 21, 2014, 12:05:24 PM
#68

So 14.6 drivers seem to lock clock speeds for some people (not me, who knows why). If you tried 14.6 and your clocks are locked I have a very easy fix for you. The bins I created below are made with 14.6 drivers, but will work fine with 14.4 installed. So, keep using (or revert to) 14.4, download this new miner, copy these bins into its folder and you should be good to go. Note these are standard settings, 8192 TC, 256 worksize, etc. These were made for a 280x, sorry I have no other cards to make bins with but some other nice person out there with other cards can do that.

Anyways link here (it's just the bins, don't worry):

https://mega.co.nz/#!5ZZ3QATZ!Tw3htWW-b-rCK0K8q9zC3Gd5eMqY5VSXS4hD4fUgYfg

Thanks a lot for your work on this new miner. I haven't run it long yet but the speed improvement is real. ~4.3 on X11 and ~3.1 on X13, for a 280x.

I used this bin and it increase my 7970 card hash rate from 2500 to 3200MH/s.

Is it possible for you to create a X13 bin?

It's already in there Smiley
cryptoangel
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 21, 2014, 12:28:48 PM
#69

I see waiting and resuming message times with this version.Did you guys  see that?


Yeah, I also keep getting that. Any update fix DJM34?.

Kablam
Jr. Member
*
Offline Offline

Activity: 33


View Profile
June 21, 2014, 12:30:58 PM
#70

How did u get it into PiMP, have 2 riggs one win7 with 280Xś and 1 with 4 290ś and PiMP, no problems with the new drivers on win7, but i have no clue how to get it running on Pimp ( latest version 14,4 )


@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x






Im using pimp 1.5.51-14.6b testing if you go to #PiMP on freenode irc and ask for the testing image someone will give you a dl link
im one of the testers...

Kablam
Kablam
Jr. Member
*
Offline Offline

Activity: 33


View Profile
June 21, 2014, 12:37:43 PM
#71

How did u get it into PiMP, have 2 riggs one win7 with 280Xś and 1 with 4 290ś and PiMP, no problems with the new drivers on win7, but i have no clue how to get it running on Pimp ( latest version 14,4 )


@djm34

nice work man.

can you please share your 290x settings? i have a 290x tri-x and a 290 tri-x and im not getting the same performance as you im getting 5k on the 290x.

first card is a 290 second 290x






What settings are you running to get 4500kh on a 290? I'm struggling to get 3500.

ok i tweaked my cards a little more and this is what i get now


the cards are sapphire tri-xes and im using TC 10240 for the 290 and 11264 for the 290x
rawintensity 131072 g2 w 128 gpucore 1050 memmory 1100 to get what ou see on the smal pic above

Kablam
djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 21, 2014, 12:52:49 PM
#72


[/quote]
I see waiting and resuming message times with this version.Did you guys  see that?


Yeah, I also keep getting that. Any update fix DJM34?.
The binaries were updated in the OP today and they should get rid of this problem

djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
restless
Legendary
*
Offline Offline

Activity: 985


View Profile
June 21, 2014, 12:58:08 PM
#73

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins
intotherain
Sr. Member
****
Offline Offline

Activity: 402


Blocklancer - Freelance on the Blockchain


View Profile
June 21, 2014, 01:14:46 PM
#74

got 4.400 my r9 280x toxic. thank you. Kiss

aadje93
Sr. Member
****
Offline Offline

Activity: 336



View Profile
June 21, 2014, 01:37:37 PM
#75

got zlib1.dll missing error on 14.4 In the other thread 14.4 whql is anounced, i downloaded the 14.4 on normal amd driver site so i suppose its the whql version.

ticoti
Hero Member
*****
Offline Offline

Activity: 798


View Profile
June 21, 2014, 03:27:35 PM
#76

great,my hashrate increased, but i don't really know if WU has increased effectively too
BITCOINDENMARK
Full Member
***
Offline Offline

Activity: 231


Blocklancer - Freelance on the Blockchain


View Profile WWW
June 21, 2014, 04:05:47 PM
#77

got 4.400 my r9 280x toxic. thank you. Kiss

Is that on windows 32 or 64 ?  (Does it mater, using 32/64?)

gmerk
Member
**
Offline Offline

Activity: 119


View Profile
June 21, 2014, 04:11:39 PM
#78

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).



BITCOINDENMARK
Full Member
***
Offline Offline

Activity: 231


Blocklancer - Freelance on the Blockchain


View Profile WWW
June 21, 2014, 04:18:05 PM
#79

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same  Smiley

ClutchThese
Sr. Member
****
Offline Offline

Activity: 406


View Profile
June 21, 2014, 04:55:02 PM
#80

Hi,

I have released a version of sgminer which allows to mine X11 and X13 coins using 14.6 amd drivers.

As it has been noticed some times ago, with 14.6 drivers almost double the hashrate of groestl algorithm and substantially increases the hashrate of any algo using groestl such as X11, X13, Nist5 (talkcoin).

However with 14.6 drivers some algos (in particular X11 and X13) stopped working completely.
This release fix the problem. This release is based on lasybear sgminer release.

You can find the source at:  https://github.com/djm34/sph-sgminer_x11mod
windows binaries at:  https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o

This version supports these kernels (and some others... but need to be checked though)

* X11mod  (-k x11mod)
* X13mod   (-k x13mod)
* Nist5      (-k nist5)   (talkcoin)
* Quark coins (-k quarkcoin)
* Animecoin (-k animecoin )

I didn't modify the original marucoin and darkcoin kernel are they are slower and some improvement on the quark/anime kernel should be expected soon)

In terms of speed, it was tested so far only on my R9 290x:
With X11mod, I get 5.4MHash/s
With X13mod, I get 3.75MHash/s  (which is not terrible compared to nvidia cards)
With Nist5, I get 15.8MHash/s (more details can be found on talkcoin thread)

If you find this work useful please donate at these addresses:  

BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p
DRK: XpeLYbqdqdC6FM51EPT1XsfXRG8TLqXEbe






is the link broken? i can't download this miner....

█████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
▓▓▓▓▓  BIT-X.comvvvvvvvvvvvvvvi
→ CREATE ACCOUNT 
▓▓▓▓▓
█████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
cryptoangel
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 21, 2014, 04:58:42 PM
#81


Anyone know any steps to get my 6970 hashing faster on X11?, currently at 1.6mhs.

Link looks down.

ClutchThese
Sr. Member
****
Offline Offline

Activity: 406


View Profile
June 21, 2014, 04:59:42 PM
#82

https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o

Works fine.

Anyone know any steps to get my 6970 hashing faster on X11?, currently at 1.6mhs.

All i'm getting is a black ball with 4 white dots going round and round.... nothing ever downloads.

█████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
▓▓▓▓▓  BIT-X.comvvvvvvvvvvvvvvi
→ CREATE ACCOUNT 
▓▓▓▓▓
█████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
cryptoangel
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 21, 2014, 05:00:28 PM
#83

https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o

Works fine.

Anyone know any steps to get my 6970 hashing faster on X11?, currently at 1.6mhs.

All i'm getting is a black ball with 4 white dots going round and round.... nothing ever downloads.


Yeah i got that after a while, just deleted that comment Smiley.

oktay50000
Sr. Member
****
Offline Offline

Activity: 378


View Profile
June 21, 2014, 05:40:16 PM
#84

updated github too? fixed for linux?

BTC : 1APsSj4vkbRVjtzhfi7ASTPLm8s3p9iRHh  DOGE : DRjdbwit2JX1fEvvtyr4xkVqtAKpP93f8Y
thcmakaveli
Sr. Member
****
Offline Offline

Activity: 253


View Profile
June 21, 2014, 05:43:13 PM
#85

The link doesnt work for me as well  Huh
oktay50000
Sr. Member
****
Offline Offline

Activity: 378


View Profile
June 21, 2014, 05:45:20 PM
#86

@djm34

Thank you a lot for this great sgminer  Smiley

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ


I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalk.org/index.php?topic=658975.msg7412560#msg7412560

where can i find linux version of fixed miner?

BTC : 1APsSj4vkbRVjtzhfi7ASTPLm8s3p9iRHh  DOGE : DRjdbwit2JX1fEvvtyr4xkVqtAKpP93f8Y
restless
Legendary
*
Offline Offline

Activity: 985


View Profile
June 21, 2014, 06:43:44 PM
#87

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same  Smiley
as in post above
Quote
I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Vampiro4L
Full Member
***
Offline Offline

Activity: 159


View Profile
June 21, 2014, 07:41:28 PM
#88

can somebody write up complete instructions how to upgrade bamt 1.6 to this version?

Supporting coins with innovative ideas since Jan 2014!
binkshurts
Member
**
Offline Offline

Activity: 84


View Profile
June 21, 2014, 07:48:43 PM
#89

This makes nvidia irrelevant again
barryzand
Hero Member
*****
Offline Offline

Activity: 518


Growcoin Developer


View Profile
June 21, 2014, 08:06:43 PM
#90

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same  Smiley
as in post above
Quote
I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).


I will try this in a few hours... thnx for sharing
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 21, 2014, 08:15:43 PM
#91

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

What/where are the opencl files ? - I would like to try the same  Smiley
as in post above
Quote
I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).


I will try this in a few hours... thnx for sharing

For me it was C:\AMD\AMD-Catalyst-14.6-Beta-V1.0-Windows-May23\Packages\Drivers\Display\WB6A_INF\B172153 and copied the 8 files, but no increase 6970.
Am I not using the correct beta drivers?

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
ClutchThese
Sr. Member
****
Offline Offline

Activity: 406


View Profile
June 21, 2014, 08:27:01 PM
#92

can anyone write instructions on how to download the miner? :/

dat mega upload is OP... i can't figure it out.

█████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
▓▓▓▓▓  BIT-X.comvvvvvvvvvvvvvvi
→ CREATE ACCOUNT 
▓▓▓▓▓
█████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
oktay50000
Sr. Member
****
Offline Offline

Activity: 378


View Profile
June 21, 2014, 08:37:29 PM
#93

still getting waiting frrom pools Huh

BTC : 1APsSj4vkbRVjtzhfi7ASTPLm8s3p9iRHh  DOGE : DRjdbwit2JX1fEvvtyr4xkVqtAKpP93f8Y
volodzya
Newbie
*
Offline Offline

Activity: 10


View Profile
June 21, 2014, 08:46:30 PM
#94

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).





hi @qmerk , @restless

I have 14.4, took 8 files ( amd_opencl32.dll, amd_opencl64.dll, amdocl.dll, amdocl_as32.exe, amdocl_as64.exe, amdocl_ld32.exe, amdocl_ld64.exe, amdocl64.dll) from 14.6 and put into sgminer folder, but no gain compared to lazybear's release in mining x11. tried few of the sgminer versions produced by djm34, including the initial one on the first page of the thread.

Could you please dump your sgminer config or command line parameters, whichever may be relevant.
Or if possible, could you also share the bin files generated by sgminer.

p.s. with lazybear's release & 14.4 driver & opencl files I get around 2180 kh/s mining x11 per each slightly overclocked 6970, have few of these in the rig.

Code:
{
"kernel" : "x11mod",
"intensity" : "21",
"worksize" : "128",
"lookup-gap" : "2"
}
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 21, 2014, 08:51:52 PM
#95

On 5850 and 6970 there is improvement with 14.6 opencl files
5850 now makes 900+KH on x13, 6970 is above 1400.
I used the version from https://bitcointalk.org/index.php?topic=658975.0, initially I reported no speed up, but I had messed bat/conf files.
Tested under 13.12 with opencl files from 14.6 copied into sgminer folder and deleting all bins

I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).





hi @qmerk , @restless

I have 14.4, took 8 files ( amd_opencl32.dll, amd_opencl64.dll, amdocl.dll, amdocl_as32.exe, amdocl_as64.exe, amdocl_ld32.exe, amdocl_ld64.exe, amdocl64.dll) from 14.6 and put into sgminer folder, but no gain compared to lazybear's release in mining x11. tried few of the sgminer versions produced by djm34, including the initial one on the first page of the thread.

Could you please dump your sgminer config or command line parameters, whichever may be relevant.
Or if possible, could you also share the bin files generated by sgminer.

p.s. with lazybear's release & 14.4 driver & opencl files I get around 2180 kh/s mining x11 per each slightly overclocked 6970, have few of these in the rig.

Code:
{
"kernel" : "x11mod",
"intensity" : "21",
"worksize" : "128",
"lookup-gap" : "2"
}

What clocks is your 6970 running at?

950/1375 ~2300kh/s with an older binfile..no increase seen with the new 14.6miner and or cl files

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
volodzya
Newbie
*
Offline Offline

Activity: 10


View Profile
June 21, 2014, 08:56:23 PM
#96

Quote

What clocks is your 6970 running at?

950/1375 ~2300kh/s with an older binfile..no increase seen with the new 14.6miner and or cl files

899/1399 Smiley
oktay50000
Sr. Member
****
Offline Offline

Activity: 378


View Profile
June 21, 2014, 09:03:05 PM
#97

you guys are okay?
are you getting waiting for work from pools with fixed version??
its annoying when it wants to start
i need to restart sgminer several times to get it to work
some times getting black screen on miner too Huh

BTC : 1APsSj4vkbRVjtzhfi7ASTPLm8s3p9iRHh  DOGE : DRjdbwit2JX1fEvvtyr4xkVqtAKpP93f8Y
rudarSRB
Full Member
***
Offline Offline

Activity: 220


View Profile
June 21, 2014, 09:04:29 PM
#98

Works like a charm Wink

smtn512
Jr. Member
*
Offline Offline

Activity: 34


View Profile
June 21, 2014, 09:06:54 PM
#99




I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

Did this... 14.4 drivers with 14.6 opencl files in sgminer folder. Msi 7790s up from 1.17mh to 1.62mh. Sapphire 270s up from 2mh to 2.72mh. If anyone is interested in my configs I'll post them upon request.

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...



Yes these little things are great power savers, and they run so cool...wish I had bought more last December when they were .1btc each. I'm very curious to know whats in your 1.8mh config...
oktay50000
Sr. Member
****
Offline Offline

Activity: 378


View Profile
June 21, 2014, 09:07:00 PM
#100

Works like a charm Wink

mine works like charm too mate but...
have you checked graph on after burner for hickups?
you dont have waiting for pool message???
can yougive me link of sgminer you are using?
i am using 14.6 beta and sgminer fixed

BTC : 1APsSj4vkbRVjtzhfi7ASTPLm8s3p9iRHh  DOGE : DRjdbwit2JX1fEvvtyr4xkVqtAKpP93f8Y
oktay50000
Sr. Member
****
Offline Offline

Activity: 378


View Profile
June 21, 2014, 09:19:11 PM
#101

i upgraded my farm with this miner and driver to 14.6
linux rigs works fine for some time and then droping hash rate after waiting work ....

windows is better but sometimes getting waitin for work

any fix for linux
?

BTC : 1APsSj4vkbRVjtzhfi7ASTPLm8s3p9iRHh  DOGE : DRjdbwit2JX1fEvvtyr4xkVqtAKpP93f8Y
volodzya
Newbie
*
Offline Offline

Activity: 10


View Profile
June 21, 2014, 10:09:20 PM
#102

@bullus,

can you post your config ?
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 21, 2014, 10:38:06 PM
#103

@bullus,

can you post your config ?
Code:

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}
6970@950/1375~2300kh/s x11

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
volodzya
Newbie
*
Offline Offline

Activity: 10


View Profile
June 21, 2014, 11:22:57 PM
#104

@bullus,

can you post your config ?
Code:

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}
6970@950/1375~2300kh/s x11

how many cards do you have in the rig ? are all 6970 ? what cpu / ram have you ?

p.s. thnx for the reply
Spacewide
Jr. Member
*
Offline Offline

Activity: 38


View Profile
June 21, 2014, 11:58:50 PM
#105

Hello

Sharing my x11 .bat for 5x R9 280X RoyalQueen Club3D.
4.45mh/s

Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://eu.wafflepool.com:3331 -u xxx -p 0.16 -I 18,18,17,18,18 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150,1150,1150,1150,1150 --gpu-memclock 1500,1500,1500,1500,1500 --auto-fan --gpu-fan 55-85 --temp-cutoff 80 --temp-overheat 76 --temp-target 73 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1

Runs like a tank.

G3220 intel CPU
8GB Ram
64GB SSD
Asrock BTC H81
x R9 280X RoyalQueen Club3D.


The api-listen and api-allow localhost is implemented to work with http://cgminermonitor.com, so obsolete.
innergy
Hero Member
*****
Offline Offline

Activity: 602



View Profile
June 22, 2014, 05:30:49 AM
#106

@djm34

Thank you a lot for this great sgminer  Smiley

I fixed the idle/work resuming problem.

This is the download link for the fixed miner: https://mega.co.nz/#!ZsJTALQI!qDh9jCWULjabTDPYq0K4fZamdZrPwot7m7AAfTEOJPQ


I also opened a new thread (just in case) some will not notice this comment and the fixed version of the miner: https://bitcointalk.org/index.php?topic=658975.msg7412560#msg7412560

The fixed miner is not available anymore.
Could someone re-upload it. Thanks.

ZenCash        Conducting Private Transactions Worldwide Completely
slack   III   ANN Thread   III   Blog   III   Telegram   III   forum   III   twitter
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬  ▄▄▄▄  ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
gmerk
Member
**
Offline Offline

Activity: 119


View Profile
June 22, 2014, 05:56:35 AM
#107




I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

Did this... 14.4 drivers with 14.6 opencl files in sgminer folder. Msi 7790s up from 1.17mh to 1.62mh. Sapphire 270s up from 2mh to 2.72mh. If anyone is interested in my configs I'll post them upon request.

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...



Yes these little things are great power savers, and they run so cool...wish I had bought more last December when they were .1btc each. I'm very curious to know whats in your 1.8mh config...

I have a gigabyte 7790 with 1Gb GDDR5. Core @1150 Mem @1200 (for less heat)
I'm getting 1.830 MH/s and 0.027 WU/m (currently at fractalcoin)
This is my conf. It's nothing special...

Code:
]
,
"xintensity" : "100",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"thread-concurrency" : "8000",
"lookup-gap" : "2",
"gpu-threads" : "4",
"gpu-engine" : "1150",
"gpu-memclock" : "1200",
"queue" : "2",
"scan-time" : "4",
"expiry" : "8",
"no-pool-disable" : true,
"failover-only" : true
}

TC doesn't play such important role as in scrypt. I also use 8192 or 2048, without any significant change.
Memory clock also doesn't affect my rate much, so I keep it low to drop the temps.
You can also try more threads (6 or 8 ).
Q/S/E  based mostly on the coin and pool and my experience/hope/illusion/paranoia...

Update: After a full day of mining, the memory clock is again stuck at stock speed (1500).
I restarted the miner but its still stuck. I'm using djm34 version.
I switched to kozmos version (with bins from 14.6), and the clock is again working ok.
I think this is getting too confusing for me to follow...

From what I've read so far, it seems series 5xxx & 6xxx don't benefit as much by 14.6 or the new miners.

Update2:
If the 14.6 opencl files are in sgminer folder, when I run sgminer, mem clock gets stuck @ stock freq.
If I remove them (after I make the bins), then mem clock acts normal. Weird or not, it works.
I've tried this with both djm34 & kozmos versions for both x11 and x13...

MacHead2006
Member
**
Offline Offline

Activity: 118


View Profile
June 22, 2014, 07:09:26 AM
#108

When I try to ./configure new miner in PIMP (14.6) I got: no OpenCL found at the end of ./configure
I have downloaded 14.6 drivers and updated pimp 1.5.5.-14.4, but all was ok with prev. version of djm34 (nist5 mod) miner.

Any ideas ?
maybe copy any files from somewhere ? I see some copy win files but dont know what to do in Linux.  Lips sealed
Kablam
Jr. Member
*
Offline Offline

Activity: 33


View Profile
June 22, 2014, 08:03:52 AM
#109

When I try to ./configure new miner in PIMP (14.6) I got: no OpenCL found at the end of ./configure
I have downloaded 14.6 drivers and updated pimp 1.5.5.-14.4, but all was ok with prev. version of djm34 (nist5 mod) miner.

Any ideas ?
maybe copy any files from somewhere ? I see some copy win files but dont know what to do in Linux.  Lips sealed

i think you have the wrong opencl verison or adl sdk after updating your drivers you have to manully delete and reinstall that.

no need to reinvent the wheel...

go to #pimp on irc freenode and ask for the 14.6b image of pimp and you dont have to do it yourself there is a workign image allrdy.

Kablam
MacHead2006
Member
**
Offline Offline

Activity: 118


View Profile
June 22, 2014, 08:39:27 AM
#110

http://files.getpimp.org/pimp-testing/

that was a link.
aadje93
Sr. Member
****
Offline Offline

Activity: 336



View Profile
June 22, 2014, 09:08:49 AM
#111

Does anybody have a fix for zlib1.dll error. Can't find a solution on google to fix it. Dont know from which package it is Sad

EDIT:

Found it in sgminer_x11mod version Wink

thanks man, hashing @ 3,9 now instead of 3,1 on 7950's. Hope this is also more stable, x11_mod had alot of "sgminer stopped working"

Imagine, i came from 1,93 on magicOS (magicpool ubuntu mining os) to 3.1 on the x11_mod and now 3,90. It insane!!

kangjunzi
Member
**
Offline Offline

Activity: 64


View Profile
June 22, 2014, 09:31:24 AM
#112

@bullus,

can you post your config ?
Code:

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}
6970@950/1375~2300kh/s x11
Great, this is a good step towards even better community.

QORA | 2ND GEN | NEW SOURCE CODE | QaMJpYsYmBZXyNNzc4cGNYHQ9Ch9L1rdgu
Get Daily Free SIGNs before too late.SoPRZUyHVEzFmychrewuPQxK9NLugsKPFi
Kablam
Jr. Member
*
Offline Offline

Activity: 33


View Profile
June 22, 2014, 10:23:14 AM
#113


dont publish that link here there was reason for you to go to the irc channel and ask for it!
the 1.5.51-14.6b image isnt public since there is some bugs on it like sgminer 5 not working....

 Undecided
BITCOINDENMARK
Full Member
***
Offline Offline

Activity: 231


Blocklancer - Freelance on the Blockchain


View Profile WWW
June 22, 2014, 10:27:24 AM
#114

got 4.400 my r9 280x toxic. thank you. Kiss

Is that on windows 32 or 64 ?  (Does it mater, using 32/64?)

bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 22, 2014, 11:11:23 AM
#115

@bullus,

can you post your config ?
Code:

],
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}
6970@950/1375~2300kh/s x11

how many cards do you have in the rig ? are all 6970 ? what cpu / ram have you ?

p.s. thnx for the reply

This rig is only 1x 6970 (gamepc)

intel cpu 2600K
8gb mem
Asus Maximus IV
win8.1

Other rig with 4x7950 + 1x6970 is hashing the same for the 6970.

G3220 intel CPU
8GB Ram
Asrock BTC H81
win8.1

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 22, 2014, 12:04:26 PM
#116

Hi, guys.
Hi
I'm a newbie in mining and I'd highly appreciate some help with the sgminer on win7
For some reason I'm unable to get connected to any pool (I tried several).
Drivers are 14.6

And here's how it runs:

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>
D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -g 1 -w 128 -I 18 -o stratum+tcp://west01.us.trademybit.com:4440 -u xxxxxx.1 -p x --no-submit-stale --verbose

--text-only
[13:54:16] Started sgminer 4.1.0
[13:54:17] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[13:54:17] CL Platform 0 name: AMD Accelerated Parallel Processing
[13:54:17] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:17] Platform 0 devices: 1
[13:54:17]      0       Caicos
[13:54:17] Number of ADL devices: 1
[13:54:18] ATI ADL Overdrive5 API found.
[13:54:18] ATI ADL Overdrive6 API found.
[13:54:18] Found 4 ADL adapters
[13:54:18] ADL index 0, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0

iVendorID:1002 name:AMD Radeon HD 7400M Series
[13:54:18] ADL index 1, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 2, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 3, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[13:54:18] ADL GPU 0 is Adapter index 0 and maps to adapter id 321458240
[13:54:18] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[13:54:18] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[13:54:18] Init GPU thread 0 GPU 0 virtual GPU 0
[13:54:18] CL Platform vendor: Advanced Micro Devices, Inc.
[13:54:18] CL Platform name: AMD Accelerated Parallel Processing
[13:54:18] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:18] List of devices:
[13:54:18]      0       Caicos
[13:54:18] Selected 0: Caicos
[13:54:18] Kernel x11mod is experimental.
[13:55:15] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 128
[13:55:15] initCl() finished. Found Caicos
[13:55:15] Probing for an alive pool
[13:55:15] Testing Pool 0
[13:55:25] Waiting for work to be available from pools.
[13:55:25] Setting GPUs to idle performance.
[13:55:58] Closing socket for stratum Pool 0
[13:56:15] No servers were found that could be used to get work from.
[13:56:15] Please check the details from the list below of the servers you have input
[13:56:15] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers
[13:56:15] Pool: 0  URL: stratum+tcp://west01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[13:56:15] No servers could be used! Exiting.


Where am I wrong with that?
Thanks in advance
Hank.H
Jr. Member
*
Offline Offline

Activity: 34


View Profile
June 22, 2014, 12:42:12 PM
#117

i encountered some issues with this 14.4 fixed version.

I downgraded to 14.4 but when i ran it, only 1 GPU work.

like :

GPU0 : OFF
GPU1 : 100%
GPU2 : OFF
GPU3 : OFF

Any ideas ?  Cry

thx

(4x R9 290)
rustybeamer
Newbie
*
Offline Offline

Activity: 21


View Profile
June 22, 2014, 01:16:42 PM
#118

Thanks to all concerned (too many posts to quote).

Took my MSI R9 290 from 3.7 to 4.99Mh/s on x11.

 Used the method of extracting (but not installing) the 14.6 AMD package, copying the 8 required files from the AMD/AMD-Catalyst-14.6-Beta-V1.0-Windows-May23/Packages/Drivers/Display/WB6A-INF/B172153 folder and putting them in the sgminer folder with any previous bins removed before starting up the miner.

Getting WU 0.069 and 0.7% rejects with 1010 core, 1300 mem, intensity 20 on trademybit pool.  Gonna let it run for a few hours before tweaking some more.

Cheers again  Smiley
fra55
Member
**
Offline Offline

Activity: 105


View Profile
June 22, 2014, 02:19:01 PM
#119

i encountered some issues with this 14.4 fixed version.

I downgraded to 14.4 but when i ran it, only 1 GPU work.

like :

GPU0 : OFF
GPU1 : 100%
GPU2 : OFF
GPU3 : OFF

Any ideas ?  Cry

thx

(4x R9 290)

Check the .conf file, it will easily contain the string GPU: 1, so only the GPU n.1 will be activated.
Change it to 0,1,2,3
Hank.H
Jr. Member
*
Offline Offline

Activity: 34


View Profile
June 22, 2014, 02:31:41 PM
#120

i encountered some issues with this 14.4 fixed version.

I downgraded to 14.4 but when i ran it, only 1 GPU work.

like :

GPU0 : OFF
GPU1 : 100%
GPU2 : OFF
GPU3 : OFF

Any ideas ?  Cry

thx

(4x R9 290)

Check the .conf file, it will easily contain the string GPU: 1, so only the GPU n.1 will be activated.
Change it to 0,1,2,3

Yes ! it works thank you very much Cheesy
volodzya
Newbie
*
Offline Offline

Activity: 10


View Profile
June 22, 2014, 03:05:47 PM
#121

@bullus, thanks.

I have H81 btc pro, g1820, 4gb 1333mhz ram - not sure if it can be the cause of 100kh per card less performance :\ ?

How do you have the cards connected ?

I have also 5970 in the same rig, don't know, if this could also be the reason for the slightly lower hash rate.
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 22, 2014, 03:27:52 PM
#122

@bullus, thanks.

I have H81 btc pro, g1820, 4gb 1333mhz ram - not sure if it can be the cause of 100kh per card less performance :\ ?

How do you have the cards connected ?

I have also 5970 in the same rig, don't know, if this could also be the reason for the slightly lower hash rate.

Are u running te same clocks?
I already said I was using an old bin file, if I created a new one with the latest miner I also get ~-100kh/s.
Let's see if I can upload my binfile somehow.

edit
x11mod bin file for 6970
https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA

x13modold bin file for 6970
https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs

Code:
sgminer 4.1.0 - Started: [2014-06-22 15:17:32] - [0 days 02:33:34]
--------------------------------------------------------------------------------
(5s):2.301M (avg):2.295Mh/s | A:963  R:14  HW:0  WU:0.032/m
ST: 1  SS: 0  NB: 205  LW: 11452  GF: 0  RF: 0
Connected to miningrentalrigs x11 (stratum) diff 0.005 as user xxxx
Block: 6dfdf680...  Diff:79  Started: [17:51:00]  Best share: 231
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  59.0C 2452RPM | 2.279M/2.296Mh/s | A:964 R:  1.4% HW:0 WU:0.032/m I:18
--------------------------------------------------------------------------------
[17:49:40] Accepted 21a89171 Diff 0.030/0.005 GPU 0 at miningrentalrigs x11
[17:49:42] Accepted 14d0b76e Diff 0.048/0.005 GPU 0 at miningrentalrigs x11
[17:49:51] Accepted 4a52b5b8 Diff 0.013/0.005 GPU 0 at miningrentalrigs x11
[17:50:06] Accepted 9d23e7e7 Diff 0.006/0.005 GPU 0 at miningrentalrigs x11
[17:50:09] Network diff set to 1.38K
[17:50:09] Stratum from miningrentalrigs x11 detected new block
[17:50:10] Accepted aaa4f24e Diff 0.006/0.005 GPU 0 at miningrentalrigs x11

 Grin

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
patoberli
Member
**
Offline Offline

Activity: 106


View Profile
June 22, 2014, 05:11:22 PM
#123

I don't get any speed increase with this binary over the default one on a 6950. Getting 1.7 Mh/s with it.

YAC: YA86YiWSvWEGSSSerPTMy4kwndabRUNftf
BTC: 16NqvkYbKMnonVEf7jHbuWURFsLeuTRidX
LTC: LTKCoiDwqEjaRCoNXfFhDm9EeWbGWouZjE
captainbluff
Sr. Member
****
Offline Offline

Activity: 335


View Profile
June 22, 2014, 05:16:08 PM
#124

On one of my rigs I downgraded from 14.6 to 14.4, while running the catalyst uninstaller the rig turned off and won't turn on again. anyone else?
volodzya
Newbie
*
Offline Offline

Activity: 10


View Profile
June 22, 2014, 05:21:08 PM
#125

@bullus, thanks.

I have H81 btc pro, g1820, 4gb 1333mhz ram - not sure if it can be the cause of 100kh per card less performance :\ ?

How do you have the cards connected ?

I have also 5970 in the same rig, don't know, if this could also be the reason for the slightly lower hash rate.

Are u running te same clocks?
I already said I was using an old bin file, if I created a new one with the latest miner I also get ~-100kh/s.
Let's see if I can upload my binfile somehow.

edit
x11mod bin file for 6970
https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA

x13modold bin file for 6970
https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs

Code:
sgminer 4.1.0 - Started: [2014-06-22 15:17:32] - [0 days 02:33:34]
--------------------------------------------------------------------------------
(5s):2.301M (avg):2.295Mh/s | A:963  R:14  HW:0  WU:0.032/m
ST: 1  SS: 0  NB: 205  LW: 11452  GF: 0  RF: 0
Connected to miningrentalrigs x11 (stratum) diff 0.005 as user xxxx
Block: 6dfdf680...  Diff:79  Started: [17:51:00]  Best share: 231
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  59.0C 2452RPM | 2.279M/2.296Mh/s | A:964 R:  1.4% HW:0 WU:0.032/m I:18
--------------------------------------------------------------------------------
[17:49:40] Accepted 21a89171 Diff 0.030/0.005 GPU 0 at miningrentalrigs x11
[17:49:42] Accepted 14d0b76e Diff 0.048/0.005 GPU 0 at miningrentalrigs x11
[17:49:51] Accepted 4a52b5b8 Diff 0.013/0.005 GPU 0 at miningrentalrigs x11
[17:50:06] Accepted 9d23e7e7 Diff 0.006/0.005 GPU 0 at miningrentalrigs x11
[17:50:09] Network diff set to 1.38K
[17:50:09] Stratum from miningrentalrigs x11 detected new block
[17:50:10] Accepted aaa4f24e Diff 0.006/0.005 GPU 0 at miningrentalrigs x11

 Grin

I do lose ~ 100 kh/s per card using the new bins, but even with old (or your) bins I reach max of 2200 kh/s.
I can see you using "gpu-threads", it makes miner more rely on the cpu, which is less powerful in my case and max gpu freq I can squeeze for solid work is around 910 - 920 mhz.

Anyhow, an extra thanks for the uploaded bin!

bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 22, 2014, 05:27:02 PM
#126

@bullus, thanks.

I have H81 btc pro, g1820, 4gb 1333mhz ram - not sure if it can be the cause of 100kh per card less performance :\ ?

How do you have the cards connected ?

I have also 5970 in the same rig, don't know, if this could also be the reason for the slightly lower hash rate.

Are u running te same clocks?
I already said I was using an old bin file, if I created a new one with the latest miner I also get ~-100kh/s.
Let's see if I can upload my binfile somehow.

edit
x11mod bin file for 6970
https://mega.co.nz/#!2JdlnIRL!5cOVuWT-2c9OVBjHRKqYhShzYTeKRChF6uOixVOvWsA

x13modold bin file for 6970
https://mega.co.nz/#!WQdj1RAB!6Bh1DvzxT_G1yRN2z_i4xC7piDqnFVS-FsH3K0MSgcs

Code:
sgminer 4.1.0 - Started: [2014-06-22 15:17:32] - [0 days 02:33:34]
--------------------------------------------------------------------------------
(5s):2.301M (avg):2.295Mh/s | A:963  R:14  HW:0  WU:0.032/m
ST: 1  SS: 0  NB: 205  LW: 11452  GF: 0  RF: 0
Connected to miningrentalrigs x11 (stratum) diff 0.005 as user xxxx
Block: 6dfdf680...  Diff:79  Started: [17:51:00]  Best share: 231
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  59.0C 2452RPM | 2.279M/2.296Mh/s | A:964 R:  1.4% HW:0 WU:0.032/m I:18
--------------------------------------------------------------------------------
[17:49:40] Accepted 21a89171 Diff 0.030/0.005 GPU 0 at miningrentalrigs x11
[17:49:42] Accepted 14d0b76e Diff 0.048/0.005 GPU 0 at miningrentalrigs x11
[17:49:51] Accepted 4a52b5b8 Diff 0.013/0.005 GPU 0 at miningrentalrigs x11
[17:50:06] Accepted 9d23e7e7 Diff 0.006/0.005 GPU 0 at miningrentalrigs x11
[17:50:09] Network diff set to 1.38K
[17:50:09] Stratum from miningrentalrigs x11 detected new block
[17:50:10] Accepted aaa4f24e Diff 0.006/0.005 GPU 0 at miningrentalrigs x11

 Grin

I do lose ~ 100 kh/s per card using the new bins, but even with old (or your) bins I reach max of 2200 kh/s.
I can see you using "gpu-threads", it makes miner more rely on the cpu, which is less powerful in my case and max gpu freq I can squeeze for solid work is around 910 - 920 mhz.

Anyhow, an extra thanks for the uploaded bin!



Are u using TCC 8000 and worksize 64?
I tried your oc clocks and getting about 2230 @920mhz, when oc to 950mhz -2300kh/s

Code:
"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
hero18688
Sr. Member
****
Offline Offline

Activity: 392


View Profile
June 22, 2014, 05:48:33 PM
#127

What is your hashrate of x13 with 280x?

amit2007gunjan
Full Member
***
Offline Offline

Activity: 224


View Profile
June 22, 2014, 05:53:56 PM
#128

What is your hashrate of x13 with 280x?

I am getting 3.077 Mh/s now from 2.6 Mh/s on my each Sapphire r9 280x.

Thanks and good job OP

◇◇◇◇◇◇◇◇◇◇◇◇◇◇◇
ICO starts 1st Nov.
◇◇◇◇◇◇◇◇◇◇◇◇◇◇◇
 
████████████████████████ PLAYKEY: DECENTRALIZED CLOUD GAMING PLATFORM ████████████████████████
█████████████ Getting lost in the sea of cryptocurrencies? Choose Playkey token! █████████████
Website | BitcoinTalk | Slack | Twitter | LinkedIn | Medium | Facebook | Reddit | Telegram
 
◇◇◇◇◇◇◇◇◇◇◇◇◇◇◇
ICO starts 1st Nov.
◇◇◇◇◇◇◇◇◇◇◇◇◇◇◇
hashbrown9000
Sr. Member
****
Offline Offline

Activity: 425


View Profile
June 22, 2014, 06:55:02 PM
#129

is anyone running an undervolted BIOS on any R9 270 cards? 

I did mine way back for scrypt, but when switching to the x11/x13mod kernels the rig would lock up 2 hours into the mining session with lasybear's version.  Anyone have these issues on this newest miner?

Octoparty: 13f33D5Km4har8V9xiSv1ZFgDddBq6bwGV
Pinkcoin: PHEuPoDd4Njy1T9NG7LFVeRusqZRntAzfm
Seedcoin: sgbg8wnVk2NnuQLnTexi3zf2yTLMcgjiRP
BTC:
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 22, 2014, 07:09:39 PM
#130

Bump!
Any help for connection issues on the previous page?

Thanks.
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 22, 2014, 07:14:22 PM
#131

is anyone running an undervolted BIOS on any R9 270 cards? 

I did mine way back for scrypt, but when switching to the x11/x13mod kernels the rig would lock up 2 hours into the mining session with lasybear's version.  Anyone have these issues on this newest miner?

u need more voltage..

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
hashbrown9000
Sr. Member
****
Offline Offline

Activity: 425


View Profile
June 22, 2014, 07:23:51 PM
#132

Quote
Quote from: hashbrown9000 on Today at 06:55:02 PM
is anyone running an undervolted BIOS on any R9 270 cards?

I did mine way back for scrypt, but when switching to the x11/x13mod kernels the rig would lock up 2 hours into the mining session with lasybear's version.  Anyone have these issues on this newest miner?

u need more voltage..

yeah i was considering flashing all of them back to stock volts.

Octoparty: 13f33D5Km4har8V9xiSv1ZFgDddBq6bwGV
Pinkcoin: PHEuPoDd4Njy1T9NG7LFVeRusqZRntAzfm
Seedcoin: sgbg8wnVk2NnuQLnTexi3zf2yTLMcgjiRP
BTC:
splawik21
Legendary
*
Offline Offline

Activity: 1148


DASH is the future of crypto!


View Profile
June 22, 2014, 07:27:52 PM
#133

hmmm strange
have r9 280x but get only 3300 MHs  1080@1500.... any ideas why only so low?
have installed 14,6 amd drivers and sdk 2,9

Huh?

ibfr33k
Member
**
Offline Offline

Activity: 75


View Profile
June 22, 2014, 07:31:00 PM
#134

Make sure you delete your bin files.  If not it will use the old ones and not create new ones with the new driver.

I'm a noob just starting, all donations are welcome.  13DXKRXQncUnWAFtemSwNH7boRZfEfsg5a
splawik21
Legendary
*
Offline Offline

Activity: 1148


DASH is the future of crypto!


View Profile
June 22, 2014, 07:35:40 PM
#135

Make sure you delete your bin files.  If not it will use the old ones and not create new ones with the new driver.

deleted
3375MHs
with

-g 2 -w 64 -I 13 --lookup-gap 2 --thread-concurrency 8191 --gpu-memclock 1500 --gpu-engine 1080 --temp-target 70 --temp-overheat 80 --temp-cutoff 82 --gpu-powertune -15 --gpu-fan auto --failover-only --expiry 20 --scan-time 10 --queue 0 --no-submit-stale

ibfr33k
Member
**
Offline Offline

Activity: 75


View Profile
June 22, 2014, 07:43:01 PM
#136

Not sure if it makes a whole lot of difference, I'm using -w 256 --thread-concurrency 8192 --gpu-memclock 1500 --gpu-engine 1100.  That gets me between 4.0 to 4.2mhash/s per 280x.  I didn't install anything extra other than the 14.6 RC drivers from guru3d.

Anyone have any ideas on what is a good speed for a 290x?  I'm using 14.6 drivers and the .cl files posted from someone on here and I'm getting 5.9Mhash/s.

core 1065
mem 1250
intensity 17
threads 27400
worksize 256

If I increase memory to 1500 I can get it up to 6.1Mhash/s but it gets a little unstable.

I'm a noob just starting, all donations are welcome.  13DXKRXQncUnWAFtemSwNH7boRZfEfsg5a
splawik21
Legendary
*
Offline Offline

Activity: 1148


DASH is the future of crypto!


View Profile
June 22, 2014, 08:36:00 PM
#137

Not sure if it makes a whole lot of difference, I'm using -w 256 --thread-concurrency 8192 --gpu-memclock 1500 --gpu-engine 1100.  That gets me between 4.0 to 4.2mhash/s per 280x.  I didn't install anything extra other than the 14.6 RC drivers from guru3d.

Anyone have any ideas on what is a good speed for a 290x?  I'm using 14.6 drivers and the .cl files posted from someone on here and I'm getting 5.9Mhash/s.

core 1065
mem 1250
intensity 17
threads 27400
worksize 256

If I increase memory to 1500 I can get it up to 6.1Mhash/s but it gets a little unstable.
can you link .cl file here please???

ibfr33k
Member
**
Offline Offline

Activity: 75


View Profile
June 22, 2014, 08:57:57 PM
#138

I used the one's from this post that COOLERbyPSP linked on another post.  Not sure who created them.

https://bitcointalk.org/index.php?topic=623409.msg7406963#msg7406963

I'm a noob just starting, all donations are welcome.  13DXKRXQncUnWAFtemSwNH7boRZfEfsg5a
barryzand
Hero Member
*****
Offline Offline

Activity: 518


Growcoin Developer


View Profile
June 22, 2014, 09:10:21 PM
#139

alright... after a lot of pain in the ass restarts... tests... etc etc...  Cry Cry


I found an old bin file for my 5870 cards... running with driver 14.4

copied it into the mining folder after updating too 14.6.. and it works... but I expected more though... so  If someone got more out of it... pls share...

My clocks are 880/1200

with version 14.4 and lasybears miner I got about 1800/1820 mhs

With the copied bin and 14.6 beta... and with the new miner, I have about 1900/1920 mhs with the same settings...

Hope this helps some people out with these cards...

If needed... I could upload the bin file... Wink
aatila
Newbie
*
Offline Offline

Activity: 5


View Profile
June 22, 2014, 09:20:11 PM
#140

I can confirm they're working (compiled on a modified version of linux), I'm getting 3.8mh for each 280x. It rose from 2.1mh...
Amazing work man!
Will you send settings pls
aatila
Newbie
*
Offline Offline

Activity: 5


View Profile
June 22, 2014, 10:30:28 PM
#141

Hello

Sharing my x11 .bat for 5x R9 280X RoyalQueen Club3D.
4.45mh/s

Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://eu.wafflepool.com:3331 -u xxx -p 0.16 -I 18,18,17,18,18 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150,1150,1150,1150,1150 --gpu-memclock 1500,1500,1500,1500,1500 --auto-fan --gpu-fan 55-85 --temp-cutoff 80 --temp-overheat 76 --temp-target 73 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1

Runs like a tank.

G3220 intel CPU
8GB Ram
64GB SSD
Asrock BTC H81
x R9 280X RoyalQueen Club3D.


The api-listen and api-allow localhost is implemented to work with http://cgminermonitor.com, so obsolete.
config setting pls
wmr1988
Jr. Member
*
Offline Offline

Activity: 45


View Profile
June 23, 2014, 01:20:37 AM
#142

Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only

loonb
Full Member
***
Offline Offline

Activity: 126


View Profile
June 23, 2014, 01:51:49 AM
#143

Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only


-I 16 -g 2
wmr1988
Jr. Member
*
Offline Offline

Activity: 45


View Profile
June 23, 2014, 02:25:56 AM
#144

Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only


-I 16 -g 2

Thanks but the increase is very miminal vs. the current setting. I'm just not getting that 20-30% performance increase that supposedly come with 14.4/14.6 driver.
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 23, 2014, 03:10:36 AM
#145

Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only



try
sgminer.exe (so delete C:\sgminer\) maybe it was refering to another exe of sgminer.

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
wmr1988
Jr. Member
*
Offline Offline

Activity: 45


View Profile
June 23, 2014, 03:28:32 AM
#146

Has anyone gotten this to work for Windows now?

For some reason I'm getting only 1.5MH/s on HD 7850 @1050/1300 core/mem - which is very close to the previous lazybear x11 mod for sph

.bat as below
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer\sgminer.exe -k x11mod  -o -p -u -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 --failover-only



try
sgminer.exe (so delete C:\sgminer\) maybe it was refering to another exe of sgminer.


My .bats were in another folder. But no even if i copy them over and removing the prefix doesn't have any difference...
smtn512
Jr. Member
*
Offline Offline

Activity: 34


View Profile
June 23, 2014, 04:26:57 AM
#147




I found the opencl files in AMD folder inside \Packages\Drivers\Display\WB6A_INF\B171094 (after decompressing the 14.6 driver package without installing it, or with 7zip)
I don't know which are needed, so I copied everything that had "opencl" or "amdocl" in the filename into the sgminer folder (8 files, dlls & exes).
Deleted all previous bins, and now it's even better (+3%) than using the bins from 14.6 (I have 14.4 drivers installed).

Did this... 14.4 drivers with 14.6 opencl files in sgminer folder. Msi 7790s up from 1.17mh to 1.62mh. Sapphire 270s up from 2mh to 2.72mh. If anyone is interested in my configs I'll post them upon request.

I use a 7790 (seven-seven-nine-zero, a bit weak I know, but only ~70W).
With 14.6 it went from 1.2MH/s to 1.8MH/s but with locked memory clock (core clock not locked).
I removed 14.6, kept the .bin files, reinstalled 14.4 and everything is fine.
If I recreate the .bin with 14.4 I get my old low hashrates again...



Yes these little things are great power savers, and they run so cool...wish I had bought more last December when they were .1btc each. I'm very curious to know whats in your 1.8mh config...

I have a gigabyte 7790 with 1Gb GDDR5. Core @1150 Mem @1200 (for less heat)
I'm getting 1.830 MH/s and 0.027 WU/m (currently at fractalcoin)
This is my conf. It's nothing special...

Code:
]
,
"xintensity" : "100",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"thread-concurrency" : "8000",
"lookup-gap" : "2",
"gpu-threads" : "4",
"gpu-engine" : "1150",
"gpu-memclock" : "1200",
"queue" : "2",
"scan-time" : "4",
"expiry" : "8",
"no-pool-disable" : true,
"failover-only" : true
}

TC doesn't play such important role as in scrypt. I also use 8192 or 2048, without any significant change.
Memory clock also doesn't affect my rate much, so I keep it low to drop the temps.
You can also try more threads (6 or 8 ).
Q/S/E  based mostly on the coin and pool and my experience/hope/illusion/paranoia...

Update: After a full day of mining, the memory clock is again stuck at stock speed (1500).
I restarted the miner but its still stuck. I'm using djm34 version.
I switched to kozmos version (with bins from 14.6), and the clock is again working ok.
I think this is getting too confusing for me to follow...

From what I've read so far, it seems series 5xxx & 6xxx don't benefit as much by 14.6 or the new miners.

Update2:
If the 14.6 opencl files are in sgminer folder, when I run sgminer, mem clock gets stuck @ stock freq.
If I remove them (after I make the bins), then mem clock acts normal. Weird or not, it works.
I've tried this with both djm34 & kozmos versions for both x11 and x13...



Thanks for the follow up. The MSIs have never liked multiple GPU threads, on any algo... Tried it today with 2 threads and most of your settings and I did get into the 1.8mh range, but after a few hours a couple of cards just slumped down to 1.4mh for some reason. Clocks still the same, no proof of a driver crash but yet they slowed down, had to reboot to get full hashrate back...odd. I did change to Xi 100 and moved my clocks around some... Kept 1130/1400 1 thread per gpu which got them to 1.75mh each just fine holding 66C in a Texas garage with AC maintaining 30C (got tired of the rigs fighting my central air) each card pulling 65-70w total. Good enough for me!
samsss
Member
**
Offline Offline

Activity: 77


View Profile
June 23, 2014, 06:01:27 AM
#148

 Huh ???my other cards doing very good(low heat,high speed),but my r9 290 became very hot and not as fast as it should be,anybody know why?(with new sg miner and 14.6driver)
zaqco
Jr. Member
*
Offline Offline

Activity: 56


View Profile
June 23, 2014, 06:08:33 AM
#149

Does this have automatic x11 / x13 switching for MiningRigRentals and/or TradeMyBit?
Could someone please post an example for it if you have it.  Much appreciated.
fra55
Member
**
Offline Offline

Activity: 105


View Profile
June 23, 2014, 06:51:50 AM
#150

Hello

Sharing my x11 .bat for 5x R9 280X RoyalQueen Club3D.
4.45mh/s

Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://eu.wafflepool.com:3331 -u xxx -p 0.16 -I 18,18,17,18,18 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150,1150,1150,1150,1150 --gpu-memclock 1500,1500,1500,1500,1500 --auto-fan --gpu-fan 55-85 --temp-cutoff 80 --temp-overheat 76 --temp-target 73 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1

Runs like a tank.

G3220 intel CPU
8GB Ram
64GB SSD
Asrock BTC H81
x R9 280X RoyalQueen Club3D.


The api-listen and api-allow localhost is implemented to work with http://cgminermonitor.com, so obsolete.
config setting pls


Just copy the values of the .bat file in the .conf file, I stands for Intensity, W for worksize, the other strings are quite straightforward
chengtangclnru4
Member
**
Offline Offline

Activity: 64


View Profile
June 23, 2014, 06:59:48 AM
#151

Hello

Sharing my x11 .bat for 5x R9 280X RoyalQueen Club3D.
4.45mh/s

Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://eu.wafflepool.com:3331 -u xxx -p 0.16 -I 18,18,17,18,18 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150,1150,1150,1150,1150 --gpu-memclock 1500,1500,1500,1500,1500 --auto-fan --gpu-fan 55-85 --temp-cutoff 80 --temp-overheat 76 --temp-target 73 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1

Runs like a tank.

G3220 intel CPU
8GB Ram
64GB SSD
Asrock BTC H81
x R9 280X RoyalQueen Club3D.


The api-listen and api-allow localhost is implemented to work with http://cgminermonitor.com, so obsolete.
config setting pls

If we add to some list, I will keep voting.

QORA | 2ND GEN | NEW SOURCE CODE | QRkyfuZWFVXPps3Y4kh2seBCmjnQ34aY8Q
Get Free VpnCoin, Join BitNet ! your VhjaUt9Sd7PNVN5XLjYSzDYpVJD6Cr4SYp
CoinMin3r
Sr. Member
****
Offline Offline

Activity: 334



View Profile
June 23, 2014, 09:01:47 AM
#152

Tried this with my R9 290 with amd 14.4, but my hashrate got decreased than before.
I used to get 2.5+MH in x13 mode before but with this just 2.3 MH.
Any idea what went wrong.
Setting are all same before & now.

                                 
                  █████████████████████████████▒
               ▒███████████████████████████████▓░
             ▒████▓                         ░▓███▒░░
         ░▒▓████▓░                            ░▓███▓▓▒▒░░
▓▓▓▓▓████████▓▒               ░░░▒▒▒▒▒░         ░▒█████████▓▓▓▓▓
████████▓▒▒░              ░▒▓▓▓▒▒▒▒▒▒▒▓▓▓▓▒         ░░▒▒████████
▓██▓                   ░▒▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▓███▒░             ███▓
▒███                 ░▓█▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓█████▒░         ▓▓█░
░█▓█░               ▓█▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓▓▓▓▓█████▓██░     ▓███░
 ▓██▓             ▒██▒▒░▒▒▒▒▒▒▒░▒▒▒▒▒▒▒▒▒▒▒░▒▒░  ░▓█▓      ███▓
 ▒█▓█░           ▓█▓▒▒▒▒▒▒▒▒▒▒░▒░▒░░░░░▒▒░ ░▒░░▓███▓      ▒███▒
  █▓█▓          ▓█▓▒▓▒▒▒▒░░░░░░░░░░░░▒▓▒▒░░▒▒▓█████░      ███▓
  ▒█▓█░        ░██▓▓▒░░░░░░░░░▒▓▒░ ░░░ ░░▒▒▓▓▓▓▓█▒█░     ▓███▒
   ▓▓▓▓        ███▒░░░░░▒░░░▒▒▒▒▒░░░░░▒▒▒▒▒▒▒▒▒▓▓ █░    ▒███▒
   ░▓▓▓▓   ░▒▒ █▓▒▒▒▒▒▓▓▓▒░▒░░░░░░░▒▒▒▒▒▒▒▒▒░▒▒▓ ▒█    ░████▒
    ░▓▒▓▒ ░▓████▓▓▓▒▒▒▓▒░░░░░░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒  ██   ░████▒
     ▒▓▓██  ▓████▓▒▒░░░░░░░░░▒▒▒▒▒▒▒▒▒▒▒░▒░▒▒░ ░██▒  ░████▒
      ▓████  ░██████▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░  ░███▓  ░████░
       ▒████   ▓█▓░█████▓▓▒▒▒▒▒▒▒▒▒▒░░░░░░▒▓████░  ▒████▒
        ░████▒  ▒░   ▒██████▓▓▓▒▒▒▒▒▒▒▓██████▓░   ▓████▒
          ████▓         ░▒▓██████████████▓░░    ░████▓
           ▒████▒                              ▓████░
             ▓████░                          ▒████▒
              ░████▓░                      ▒████▓
                ░████▓░                  ▒████▓░
                  ░████▓░              ▒████▓░
                     ░▓████▒          ▓████▒░
                       ░▒████▓░    ▒████▓▒
                          ░▓████▓▓████▓░
                             ▒█████▓░
                               ░▒▒░
✬✬✬✬✬

GhostPlayer
Legendary
*
Offline Offline

Activity: 924


View Profile
June 23, 2014, 09:08:13 AM
#153

WORKS !! AMD 13.12 - (opencl etc from 14.6 dropped in sgminer folder) - 4,15 mh/s from 280x (bios undervolted)

Well, it worked for me, but weird. When I first moved to x11, I used scrypt setting, and that was crap. So after much tweaking I found that
-I 19 -g 1 (pools) and -I 18 -g 1 (p2pool) gave me the best performance.

 Same happened here. With -g 2 -I 13 (max without driver crash) I get 3,1mh/s.

 Total hashrate (5x 280x) = 20,75 mh/s
 sgminer reports WU = 0.290,
 pool is going a bit bananas, but it also did that before. Reporting 32mh/s, but its only been up 5 minutes.
 
Try these!

Quote
-k x11mod -o stratum+tcp://xxx.xxx.org:3333 -u xxxx -p xxxxx --auto-fan --gpu-fan 25-85 --temp-cutoff 92 --temp-overheat 88 --temp-target 64 -I 19 -g 1 -w 256 --lookup-gap 2 --thread-concurrency 8192 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500

 Thank you!!
atp1916
Legendary
*
Offline Offline

Activity: 854



View Profile
June 23, 2014, 09:45:45 AM
#154

I can also confirm that the openCL file copy method works on 14.4 / 13.12 with 290s and 270s.  Just deleted old bins and extra hash is there.

Here is a shot of the AMD openCL files i pulled:


Edit: I am noticing 13.12 rigs are slower than the 14.4 / 14.6 rigs (maybe).  May need minimum 14.4 to make this work.  Testing now...  No difference with 13.12 vs 14.4/14.6 with same settings.
Eastwind
Hero Member
*****
Offline Offline

Activity: 896



View Profile
June 23, 2014, 09:48:26 AM
#155

Can somebody post a .bin for X13 generated with 14.6?

Hopefully, with TC=8192, Worksize 128 or 256, gpu threads = 2.

Thanks in advance.

Edit: found it
https://bitcointalk.org/index.php?topic=658411.msg7429385#msg7429385
trankil
Hero Member
*****
Offline Offline

Activity: 504


View Profile WWW
June 23, 2014, 09:54:52 AM
#156

hello
i'm on linux with smos linux

i have updated successfully my AMD driver but i have a problem to compile your miner


when i use

CFLAGS="-O2 -Wall -march=native" ./configure

i have this result

Quote

------------------------------------------------------------------------
sgminer 4.1.0
------------------------------------------------------------------------


Configuration Options Summary:

  Use git version......: yes
  libcurl(GBT+getwork).: Enabled: -lcurl
  curses.TUI...........: FOUND: -lncurses
  OpenCL...............: FOUND. GPU mining support enabled
  ADL..................: SDK found, GPU monitoring support enabled

Compilation............: make (or gmake)
  CPPFLAGS.............:
  CFLAGS...............: -O2 -Wall -march=native
  LDFLAGS..............:  -lpthread
  LDADD................: -ldl -lcurl   compat/jansson-2.5/src/.libs/libjansson.a -lpthread -L/opt/AMDAPP/lib/x86 -lOpenCL    -lm -lrt

Installation...........: make install (as root if needed, with 'su' or 'sudo')
  prefix...............: /usr/local

root@smos-1:/opt/miners/sph-sgminer_x11mod# CFLAGS="-O2 -Wall -march=native" ./configure


but when i do the make   i have no ./sgminer created

do you have an idea what i miss?

Quote

root@smos-1:/opt/miners/sph-sgminer_x11mod# make
fatal: No names found, cannot describe anything.
make  all-recursive
fatal: No names found, cannot describe anything.
make[1]: Entering directory `/opt/miners/sph-sgminer_x11mod'
Making all in lib
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod/lib'
  GEN    signal.h
  GEN    string.h
make  all-recursive
make[3]: Entering directory `/opt/miners/sph-sgminer_x11mod/lib'
make[4]: Entering directory `/opt/miners/sph-sgminer_x11mod/lib'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/opt/miners/sph-sgminer_x11mod/lib'
make[3]: Leaving directory `/opt/miners/sph-sgminer_x11mod/lib'
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod/lib'
Making all in compat
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat'
Making all in jansson-2.5
make[3]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make  all-recursive
make[4]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
Making all in src
make[5]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5/src'
  CC     dump.lo
  CC     error.lo
  CC     hashtable.lo
  CC     load.lo
  CC     memory.lo
  CC     pack_unpack.lo
  CC     strbuffer.lo
  CC     strconv.lo
  CC     value.lo
  CCLD   libjansson.la
make[5]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5/src'
make[5]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make[5]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make[4]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make[3]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat/jansson-2.5'
make[3]: Entering directory `/opt/miners/sph-sgminer_x11mod/compat'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat'
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod/compat'
Making all in ccan
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod/ccan'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod/ccan'
Making all in sph
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod/sph'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod/sph'
fatal: No names found, cannot describe anything.
make[2]: Entering directory `/opt/miners/sph-sgminer_x11mod'
  CC     sgminer-sgminer.o
sgminer.c: In function ‚set_difficulty_multiplier‚:
sgminer.c:1091: warning: comparison of distinct pointer types lacks a cast
sgminer.c: In function ‚calc_diff‚:
sgminer.c:3041: warning: unused variable ‚uintdiff‚
sgminer.c: In function ‚app_restart‚:
sgminer.c:3246: warning: passing argument 2 of ‚execv‚ from incompatible pointer type
/usr/include/unistd.h:558: note: expected ‚char * const*‚ but argument is of type ‚const char * const*‚
sgminer.c: In function ‚rebuild_nonce‚:
sgminer.c:6182: warning: implicit declaration of function ‚qubitcoin_regenhash‚
sgminer.c:6185: warning: implicit declaration of function ‚quarkcoin_regenhash‚
sgminer.c:6188: warning: implicit declaration of function ‚myriadcoin_groestl_regenhash‚
sgminer.c:6191: warning: implicit declaration of function ‚fuguecoin_regenhash‚
sgminer.c:6194: warning: implicit declaration of function ‚inkcoin_regenhash‚
sgminer.c:6197: warning: implicit declaration of function ‚animecoin_regenhash‚
sgminer.c:6200: warning: implicit declaration of function ‚groestlcoin_regenhash‚
sgminer.c:6203: warning: implicit declaration of function ‚sifcoin_regenhash‚
sgminer.c:6206: warning: implicit declaration of function ‚twecoin_regenhash‚
sgminer.c:6214: warning: implicit declaration of function ‚marucoin_regenhash‚
  CC     sgminer-api.o
api.c: In function ‚api‚:
api.c:3740: warning: ‚isjoin‚ may be used uninitialized in this function
api.c:3732: warning: ‚cmdsbuf‚ may be used uninitialized in this function
  CC     sgminer-util.o
  CC     sgminer-sha2.o
  CC     sgminer-logging.o
  CC     sgminer-driver-opencl.o
driver-opencl.c: In function ‚queue_sph_kernel‚:
driver-opencl.c:1205: warning: unused variable ‚midstate‚
driver-opencl.c: In function ‚queue_x11mod_kernel‚:
driver-opencl.c:1226: warning: unused variable ‚num‚
driver-opencl.c:1224: warning: unused variable ‚midstate‚
driver-opencl.c: In function ‚queue_nist5_kernel‚:
driver-opencl.c:1269: warning: unused variable ‚num‚
driver-opencl.c:1267: warning: unused variable ‚midstate‚
driver-opencl.c: In function ‚queue_x13mod_kernel‚:
driver-opencl.c:1301: warning: unused variable ‚num‚
driver-opencl.c:1299: warning: unused variable ‚midstate‚
driver-opencl.c: In function ‚queue_x13modold_kernel‚:
driver-opencl.c:1348: warning: unused variable ‚num‚
driver-opencl.c:1346: warning: unused variable ‚midstate‚
  CC     sgminer-ocl.o
  CC     sgminer-findnonce.o
  CC     sgminer-adl.o
adl.c: In function ‚init_adl‚:
adl.c:329: warning: unused variable ‚iNumDisplays‚
adl.c: At top level:
adl.c:124: warning: ‚lpAdlDisplayInfo‚ defined but not used
  CC     sgminer-scrypt.o
  CC     sgminer-darkcoin.o
darkcoin.c: In function ‚darkcoin_regenhash‚:
darkcoin.c:174: warning: unused variable ‚scratchbuf‚
darkcoin.c: In function ‚scanhash_darkcoin‚:
darkcoin.c:189: warning: unused variable ‚scratchbuf‚
  CC     sgminer-qubitcoin.o
qubitcoin.c: In function ‚qubitcoin_regenhash‚:
qubitcoin.c:138: warning: unused variable ‚scratchbuf‚
qubitcoin.c: In function ‚scanhash_qubitcoin‚:
qubitcoin.c:153: warning: unused variable ‚scratchbuf‚
  CC     sgminer-quarkcoin.o
quarkcoin.c: In function ‚quarkcoin_regenhash‚:
quarkcoin.c:174: warning: unused variable ‚scratchbuf‚
quarkcoin.c: In function ‚scanhash_quarkcoin‚:
quarkcoin.c:189: warning: unused variable ‚scratchbuf‚
  CC     sgminer-myriadcoin-groestl.o
myriadcoin-groestl.c: In function ‚myriadcoin_groestl_regenhash‚:
myriadcoin-groestl.c:102: warning: unused variable ‚scratchbuf‚
myriadcoin-groestl.c: In function ‚scanhash_myriadcoin_groestl‚:
myriadcoin-groestl.c:117: warning: unused variable ‚scratchbuf‚
  CC     sgminer-fuguecoin.o
fuguecoin.c: In function ‚fuguecoin_regenhash‚:
fuguecoin.c:88: warning: unused variable ‚scratchbuf‚
fuguecoin.c: In function ‚scanhash_fuguecoin‚:
fuguecoin.c:103: warning: unused variable ‚scratchbuf‚
  CC     sgminer-inkcoin.o
inkcoin.c: In function ‚inkcoin_regenhash‚:
inkcoin.c:96: warning: unused variable ‚scratchbuf‚
inkcoin.c: In function ‚scanhash_inkcoin‚:
inkcoin.c:124: warning: implicit declaration of function ‚xhash‚
inkcoin.c:111: warning: unused variable ‚scratchbuf‚
  CC     sgminer-animecoin.o
animecoin.c: In function ‚animecoin_regenhash‚:
animecoin.c:174: warning: unused variable ‚scratchbuf‚
animecoin.c: In function ‚scanhash_animecoin‚:
animecoin.c:189: warning: unused variable ‚scratchbuf‚
  CC     sgminer-groestlcoin.o
groestlcoin.c: In function ‚groestlhash‚:
groestlcoin.c:57: warning: unused variable ‚ctx_sha2‚
groestlcoin.c: In function ‚groestlcoin_regenhash‚:
groestlcoin.c:102: warning: unused variable ‚scratchbuf‚
groestlcoin.c: In function ‚scanhash_groestlcoin‚:
groestlcoin.c:117: warning: unused variable ‚scratchbuf‚
  CC     sgminer-sifcoin.o
sifcoin.c: In function ‚sifcoin_regenhash‚:
sifcoin.c:129: warning: unused variable ‚scratchbuf‚
sifcoin.c: In function ‚scanhash_sifcoin‚:
sifcoin.c:144: warning: unused variable ‚scratchbuf‚
  CC     sgminer-twecoin.o
twecoin.c: In function ‚twecoin_regenhash‚:
twecoin.c:115: warning: unused variable ‚scratchbuf‚
twecoin.c: In function ‚scanhash_twecoin‚:
twecoin.c:130: warning: unused variable ‚scratchbuf‚
  CC     sgminer-marucoin.o
marucoin.c: In function ‚marucoin_regenhash‚:
marucoin.c:187: warning: unused variable ‚scratchbuf‚
marucoin.c: In function ‚scanhash_marucoin‚:
marucoin.c:202: warning: unused variable ‚scratchbuf‚
  CC     sgminer-nist5.o
nist5.c: In function ‚nist5_regenhash‚:
nist5.c:139: warning: unused variable ‚scratchbuf‚
nist5.c: In function ‚scanhash_nist5‚:
nist5.c:154: warning: unused variable ‚scratchbuf‚
  CCLD   sgminer
make[2]: Leaving directory `/opt/miners/sph-sgminer_x11mod'
make[1]: Leaving directory `/opt/miners/sph-sgminer_x11mod'
root@smos-1:/opt/miners/sph-sgminer_x11mod#


intotherain
Sr. Member
****
Offline Offline

Activity: 402


Blocklancer - Freelance on the Blockchain


View Profile
June 23, 2014, 09:57:50 AM
#157

got 4.400 my r9 280x toxic. thank you. Kiss

Is that on windows 32 or 64 ?  (Does it mater, using 32/64?)
windows 7 64bit

SolarFox
Member
**
Offline Offline

Activity: 103


View Profile
June 23, 2014, 10:15:57 AM
#158

@DJM34

Mining with x11modTahitiglg2tc8262w256l4.bin generated with this new miner is a little slower than with *.bin generated with "x11x13mod_03_06_2014" miner.

but check it... Maybe it`s only me.
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 23, 2014, 10:22:56 AM
#159

Are you all here such a f* snobs?
Asked a question but nobody bothers to drop a word for it.
atp1916
Legendary
*
Offline Offline

Activity: 854



View Profile
June 23, 2014, 10:28:16 AM
#160

Hi, guys.
Hi
I'm a newbie in mining and I'd highly appreciate some help with the sgminer on win7
For some reason I'm unable to get connected to any pool (I tried several).
Drivers are 14.6

And here's how it runs:

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>
D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -g 1 -w 128 -I 18 -o stratum+tcp://west01.us.trademybit.com:4440 -u xxxxxx.1 -p x --no-submit-stale --verbose

--text-only
[13:54:16] Started sgminer 4.1.0
[13:54:17] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[13:54:17] CL Platform 0 name: AMD Accelerated Parallel Processing
[13:54:17] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:17] Platform 0 devices: 1
[13:54:17]      0       Caicos
[13:54:17] Number of ADL devices: 1
[13:54:18] ATI ADL Overdrive5 API found.
[13:54:18] ATI ADL Overdrive6 API found.
[13:54:18] Found 4 ADL adapters
[13:54:18] ADL index 0, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0

iVendorID:1002 name:AMD Radeon HD 7400M Series
[13:54:18] ADL index 1, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 2, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 3, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[13:54:18] ADL GPU 0 is Adapter index 0 and maps to adapter id 321458240
[13:54:18] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[13:54:18] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[13:54:18] Init GPU thread 0 GPU 0 virtual GPU 0
[13:54:18] CL Platform vendor: Advanced Micro Devices, Inc.
[13:54:18] CL Platform name: AMD Accelerated Parallel Processing
[13:54:18] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:18] List of devices:
[13:54:18]      0       Caicos
[13:54:18] Selected 0: Caicos
[13:54:18] Kernel x11mod is experimental.
[13:55:15] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 128
[13:55:15] initCl() finished. Found Caicos
[13:55:15] Probing for an alive pool
[13:55:15] Testing Pool 0
[13:55:25] Waiting for work to be available from pools.
[13:55:25] Setting GPUs to idle performance.
[13:55:58] Closing socket for stratum Pool 0
[13:56:15] No servers were found that could be used to get work from.

[13:56:15] Please check the details from the list below of the servers you have input
[13:56:15] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers
[13:56:15] Pool: 0  URL: stratum+tcp://west01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[13:56:15] No servers could be used! Exiting.


Where am I wrong with that?
Thanks in advance


For posterity, here was the post that contained the question.

You did update to the "fixed" SGMiner that the OP updated to, right?  

It would appear that your miner is connecting just fine to the actual pool (as it is waiting for work to be available), and by extension your worker (maybe).. but dying because no work was found.  As such, i would rule out a config error wrt to the hardware.  You did do your workers on the pool(s) right, right?
thefrog
Sr. Member
****
Offline Offline

Activity: 364


View Profile
June 23, 2014, 10:28:56 AM
#161

Are you all here such a f* snobs?
Asked a question but nobody bothers to drop a word for it.


? what was the question again ?

running 280x at 4.2 with this release, linux. I can answer linux related stuff, but not windows.
atp1916
Legendary
*
Offline Offline

Activity: 854



View Profile
June 23, 2014, 10:31:34 AM
#162

Are you all here such a f* snobs?
Asked a question but nobody bothers to drop a word for it.


? what was the question again ?

running 280x at 4.2 with this release, linux. I can answer linux related stuff, but not windows.


It got buried couple pages back, i brought it back above your post.
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 23, 2014, 10:49:52 AM
#163

Hi, guys.
Hi
I'm a newbie in mining and I'd highly appreciate some help with the sgminer on win7
For some reason I'm unable to get connected to any pool (I tried several).
Drivers are 14.6

And here's how it runs:

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1
SUCCESS: Specified value was saved.
D:\ISR\sgminer_14.6_fixed\kernel>
D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -g 1 -w 128 -I 18 -o stratum+tcp://west01.us.trademybit.com:4440 -u xxxxxx.1 -p x --no-submit-stale --verbose

--text-only
[13:54:16] Started sgminer 4.1.0
[13:54:17] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[13:54:17] CL Platform 0 name: AMD Accelerated Parallel Processing
[13:54:17] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:17] Platform 0 devices: 1
[13:54:17]      0       Caicos
[13:54:17] Number of ADL devices: 1
[13:54:18] ATI ADL Overdrive5 API found.
[13:54:18] ATI ADL Overdrive6 API found.
[13:54:18] Found 4 ADL adapters
[13:54:18] ADL index 0, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0

iVendorID:1002 name:AMD Radeon HD 7400M Series
[13:54:18] ADL index 1, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 2, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] ADL index 3, id 321458240 - BIOS partno.: BR41330.001, version: 013.0
09.000.010, date: 2011/07/20 06:08
[13:54:18] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[13:54:18] ADL GPU 0 is Adapter index 0 and maps to adapter id 321458240
[13:54:18] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[13:54:18] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[13:54:18] Init GPU thread 0 GPU 0 virtual GPU 0
[13:54:18] CL Platform vendor: Advanced Micro Devices, Inc.
[13:54:18] CL Platform name: AMD Accelerated Parallel Processing
[13:54:18] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[13:54:18] List of devices:
[13:54:18]      0       Caicos
[13:54:18] Selected 0: Caicos
[13:54:18] Kernel x11mod is experimental.
[13:55:15] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 128
[13:55:15] initCl() finished. Found Caicos
[13:55:15] Probing for an alive pool
[13:55:15] Testing Pool 0
[13:55:25] Waiting for work to be available from pools.
[13:55:25] Setting GPUs to idle performance.
[13:55:58] Closing socket for stratum Pool 0
[13:56:15] No servers were found that could be used to get work from.

[13:56:15] Please check the details from the list below of the servers you have input
[13:56:15] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers
[13:56:15] Pool: 0  URL: stratum+tcp://west01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[13:56:15] No servers could be used! Exiting.


Where am I wrong with that?
Thanks in advance


For posterity, here was the post that contained the question.

You did update to the "fixed" SGMiner that the OP updated to, right?  

It would appear that your miner is connecting just fine to the actual pool (as it is waiting for work to be available), and by extension your worker (maybe).. but dying because no work was found.  As such, i would rule out a config error wrt to the hardware.  You did do your workers on the pool(s) right, right?

The stratum west01 is offline due to problems on serverside.

Quote
2014-06-22 at 07:55pm EST: Our provider continues to have issues in their west-coast datacenter. We will be opening new west-coast servers hopefully over the enxt few days.


btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 23, 2014, 10:54:43 AM
#164



For posterity, here was the post that contained the question.

You did update to the "fixed" SGMiner that the OP updated to, right?  

It would appear that your miner is connecting just fine to the actual pool (as it is waiting for work to be available), and by extension your worker (maybe).. but dying because no work was found.  As such, i would rule out a config error wrt to the hardware.  You did do your workers on the pool(s) right, right?


Hi
Thanks for your reply and sorry for being rude.
yes, I updated to the "fixed" but tried also the original version in this thread. Both do the same.
I tried dozen of pools but it's always the same. So. I think the problem is on my side.
I Installed  14.6 drivers, perhaps something is still missing....
No idea how to proceed from this point  Embarrassed
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 23, 2014, 11:05:16 AM
#165

[14:02:02] Pool: 0  URL: stratum+tcp://east01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[14:02:02] Press any key to exit, or sgminer will try again in 15s.
[14:02:18] Testing Pool 0
[14:02:45] Closing socket for stratum Pool 0
[14:03:18] No servers were found that could be used to get work from.
[14:03:18] Please check the details from the list below of the servers you have input
[14:03:18] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers


atp1916
Legendary
*
Offline Offline

Activity: 854



View Profile
June 23, 2014, 11:30:47 AM
#166

DedRes: when you make your worker, you don't retype your username in, right?

If you retype your username in, you'll end up with a workername that looks like this: workername.workername.xyz.  It's a common mistake.
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 23, 2014, 11:36:42 AM
#167

DedRes: when you make your worker, you don't retype your username in, right?

If you retype your username in, you'll end up with a workername that looks like this: workername.workername.xyz.  It's a common mistake.

Yep, I checked that. No double names. I actually even checked some P2P pools and drk.ghash.io where the worker is created automatically.
No luck.
Perhaps you can give me some server:port and worker which is 100% OK and I'll test it. I'm pretty sure there will be the same picture, but it worth a try.

Thanks
atp1916
Legendary
*
Offline Offline

Activity: 854



View Profile
June 23, 2014, 11:39:24 AM
#168

DedRes: when you make your worker, you don't retype your username in, right?

If you retype your username in, you'll end up with a workername that looks like this: workername.workername.xyz.  It's a common mistake.

Yep, I checked that. No double names. I actually even checked some P2P pools and drk.ghash.io where the worker is created automatically.
No luck.
Perhaps you can give me some server:port and worker which is 100% OK and I'll test it. I'm pretty sure there will be the same picture, but it worth a try.

Thanks

Ok:  Here is my wafflepool server config.  Mining on it right now

Code:
-o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 23, 2014, 11:50:59 AM
#169


Ok:  Here is my wafflepool server config.  Mining on it right now

Code:
-o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02


D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1

SUCCESS: Specified value was saved.

D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02 --verbose --text-only
[14:46:50] Started sgminer 4.1.0
[14:46:50] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[14:46:50] CL Platform 0 name: AMD Accelerated Parallel Processing
[14:46:50] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[14:46:50] Platform 0 devices: 1
[14:46:50]      0       Caicos
[14:46:50] Number of ADL devices: 1
[14:46:51] ATI ADL Overdrive5 API found.
[14:46:51] ATI ADL Overdrive6 API found.
[14:46:51] Found 4 ADL adapters
[14:46:51] ADL index 0, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0 iVendorID:1002 name:AMD Radeon HD 7400M Series
[14:46:51] ADL index 1, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] ADL index 2, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] ADL index 3, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[14:46:51] ADL GPU 0 is Adapter index 0 and maps to adapter id 53022400
[14:46:51] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[14:46:51] Init GPU thread 0 GPU 0 virtual GPU 0
[14:46:51] CL Platform vendor: Advanced Micro Devices, Inc.
[14:46:51] CL Platform name: AMD Accelerated Parallel Processing
[14:46:51] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[14:46:51] List of devices:
[14:46:51]      0       Caicos
[14:46:51] Selected 0: Caicos
[14:46:51] Kernel x11mod is experimental.
[14:47:44] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 256
[14:47:44] initCl() finished. Found Caicos
[14:47:44] Probing for an alive pool
[14:47:44] Testing Pool 0
[14:47:45] Pool 0 difficulty changed to 0.160
[14:47:54] Waiting for work to be available from pools.
[14:47:54] Setting GPUs to idle performance.
[14:48:14] Closing socket for stratum Pool 0
[14:48:44] No servers were found that could be used to get work from.
[14:48:44] Please check the details from the list below of the servers you have input
[14:48:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[14:48:44] Pool: 0  URL: stratum+tcp://useast.wafflepool.com:3331  User: 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4  Password: d=0.02
[14:48:44] No servers could be used! Exiting.
atp1916
Legendary
*
Offline Offline

Activity: 854



View Profile
June 23, 2014, 12:00:02 PM
#170

Something is definitely borked on your end, Dedres.

You do have a tunnel for your miner through any sort of firewall you're running?
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 23, 2014, 12:06:26 PM
#171

Something is definitely borked on your end, Dedres.

You do have a tunnel for your miner through any sort of firewall you're running?

No FW is running on the computer but there may be some filter on the ISP side. I don't really know how to check that.

BTW, here's the info from the GPU. I realized the device is actually 6760 while the name says 7400M series. Not sure if it makes any difference.

Name   AMD Radeon HD 7400M Series
PNP Device ID   PCI\VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00\4&2179970E&0&0008
Adapter Type   ATI display adapter (0x6760), Advanced Micro Devices, Inc. compatible
Adapter Description   AMD Radeon HD 7400M Series
Adapter RAM   1.00 GB (1,073,741,824 bytes)
Installed Drivers   aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version   14.200.0.0
Driver   c:\windows\system32\drivers\atikmpag.sys (8.14.1.6387, 544.00 KB (557,056 bytes), 5/23/2014 4:11 AM)
bullus
Sr. Member
****
Offline Offline

Activity: 294


View Profile
June 23, 2014, 02:14:52 PM
#172

Something is definitely borked on your end, Dedres.

You do have a tunnel for your miner through any sort of firewall you're running?

No FW is running on the computer but there may be some filter on the ISP side. I don't really know how to check that.

BTW, here's the info from the GPU. I realized the device is actually 6760 while the name says 7400M series. Not sure if it makes any difference.

Name   AMD Radeon HD 7400M Series
PNP Device ID   PCI\VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00\4&2179970E&0&0008
Adapter Type   ATI display adapter (0x6760), Advanced Micro Devices, Inc. compatible
Adapter Description   AMD Radeon HD 7400M Series
Adapter RAM   1.00 GB (1,073,741,824 bytes)
Installed Drivers   aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version   14.200.0.0
Driver   c:\windows\system32\drivers\atikmpag.sys (8.14.1.6387, 544.00 KB (557,056 bytes), 5/23/2014 4:11 AM)


Then u need x13mod-old.

btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
TR8888
Hero Member
*****
Offline Offline

Activity: 528


View Profile
June 23, 2014, 02:16:50 PM
#173

Works a treat, Thanks  Smiley
splawik21
Legendary
*
Offline Offline

Activity: 1148


DASH is the future of crypto!


View Profile
June 23, 2014, 03:01:31 PM
#174

I can also confirm that the openCL file copy method works on 14.4 / 13.12 with 290s and 270s.  Just deleted old bins and extra hash is there.

Here is a shot of the AMD openCL files i pulled:


Edit: I am noticing 13.12 rigs are slower than the 14.4 / 14.6 rigs (maybe).  May need minimum 14.4 to make this work.  Testing now...  No difference with 13.12 vs 14.4/14.6 with same settings.


after puting all selected files here and changing parametr to g1 in conf file I finally get mine 4,2MHs Ufffff Smiley


My conf:

@ECHO --------------------------------------------------------------
timeout /t 15
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0E

sgminer.exe -k x11mod -o stratum+tcp://drk.coinmine.pl:6090 -u user -p xxx -g 1 -w 64 -I 13 --lookup-gap 2 --thread-concurrency 8191 --gpu-memclock 1500 --gpu-engine 1090 --temp-target 70 --temp-overheat 80 --temp-cutoff 82 --gpu-powertune -15 --gpu-fan auto --failover-only --expiry 20 --scan-time 10 --queue 0 --no-submit-stale



NOOOOOOOOOOOOOOOO I`ve just saw I get all HW errors ... helllllllp me.....

EDIT2. Added bin files for x11 and x13 which I`ve found on pages before and works cool....on 2 gpu 280x I`m getting 13,3 MHs
bin files here: https://bitcointalk.org/index.php?topic=658411.msg7429385#msg7429385

thefrog
Sr. Member
****
Offline Offline

Activity: 364


View Profile
June 23, 2014, 03:42:29 PM
#175


Ok:  Here is my wafflepool server config.  Mining on it right now

Code:
-o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02


D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

D:\ISR\sgminer_14.6_fixed\kernel>setx GPU_USE_SYNC_OBJECTS 1

SUCCESS: Specified value was saved.

D:\ISR\sgminer_14.6_fixed\kernel>..\sgminer.exe --kernel x11mod -o stratum+tcp://useast.wafflepool.com:3331 -u 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4 -p d=0.02 --verbose --text-only
[14:46:50] Started sgminer 4.1.0
[14:46:50] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[14:46:50] CL Platform 0 name: AMD Accelerated Parallel Processing
[14:46:50] CL Platform 0 version: OpenCL 1.2 AMD-APP (1526.3)
[14:46:50] Platform 0 devices: 1
[14:46:50]      0       Caicos
[14:46:50] Number of ADL devices: 1
[14:46:51] ATI ADL Overdrive5 API found.
[14:46:51] ATI ADL Overdrive6 API found.
[14:46:51] Found 4 ADL adapters
[14:46:51] ADL index 0, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] GPU 0 assigned: iAdapterIndex:0 iPresent:1 strUDID:PCI_VEN_1002&DEV_6760&SUBSYS_161E103C&REV_00_4&2179970E&0&0008A iBusNumber:1 iDeviceNumber:0 iFunctionNumber:0 iVendorID:1002 name:AMD Radeon HD 7400M Series
[14:46:51] ADL index 1, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] ADL index 2, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] ADL index 3, id 53022400 - BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] GPU 0 AMD Radeon HD 7400M Series hardware monitoring enabled
[14:46:51] ADL GPU 0 is Adapter index 0 and maps to adapter id 53022400
[14:46:51] GPU 0 BIOS partno.: BR41330.001, version: 013.009.000.010, date: 2011/07/20 06:08
[14:46:51] Failed to ADL_Overdrive5_FanSpeed_Get for default value
[14:46:51] Init GPU thread 0 GPU 0 virtual GPU 0
[14:46:51] CL Platform vendor: Advanced Micro Devices, Inc.
[14:46:51] CL Platform name: AMD Accelerated Parallel Processing
[14:46:51] CL Platform version: OpenCL 1.2 AMD-APP (1526.3)
[14:46:51] List of devices:
[14:46:51]      0       Caicos
[14:46:51] Selected 0: Caicos
[14:46:51] Kernel x11mod is experimental.
[14:47:44] Initialising kernel x11mod.cl with bitalign, 1 vectors and worksize 256
[14:47:44] initCl() finished. Found Caicos
[14:47:44] Probing for an alive pool
[14:47:44] Testing Pool 0
[14:47:45] Pool 0 difficulty changed to 0.160
[14:47:54] Waiting for work to be available from pools.
[14:47:54] Setting GPUs to idle performance.
[14:48:14] Closing socket for stratum Pool 0
[14:48:44] No servers were found that could be used to get work from.
[14:48:44] Please check the details from the list below of the servers you have input
[14:48:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[14:48:44] Pool: 0  URL: stratum+tcp://useast.wafflepool.com:3331  User: 1Et8Ma3KcwoSmRogLtWgNo7oGv83mrK6T4  Password: d=0.02
[14:48:44] No servers could be used! Exiting.

\
Try to change -p xxx
just xxx instead what you have now.

try to use -o stratum+tcp://ca.p2pool.sk:7903 -u <whateverdarkcoinaddress> -p xxx

just to see if you get some work.

trankil
Hero Member
*****
Offline Offline

Activity: 504


View Profile WWW
June 23, 2014, 05:15:28 PM
#176

could someone try help me https://bitcointalk.org/index.php?topic=658411.msg7465165#msg7465165

i do the make and the .sgminer  don't be create

steveperry
Jr. Member
*
Offline Offline

Activity: 53


View Profile
June 23, 2014, 05:56:29 PM
#177

running a 290 and two 290x, using the 14.4 drivers and not getting any better results than with the miner i was currently using.


they are running @ 3.75M x 2 and 3.4M,

using

"intensity" : "18",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "32765",
"shaders" : "0",
"gpu-threads" : "2",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"failover-switch-delay" : "300",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"vectors" : "1",
"no-submit-stale" : true,
"kernel-path" : "/usr/local/bin"


running core and memory @ 1000 and 1250, because thats what my baseline is.  I will adjust that once I figure out problem.

any ideas on why it's not faster? thanks

edit -- i installed the 14.6 drivers and that boosted the speed to 4.2M and 3.5. not a huge jump but i'll take it.  still would like to hear tips to improve
happoman
Newbie
*
Offline Offline

Activity: 14


View Profile
June 23, 2014, 06:12:54 PM
#178

[14:02:02] Pool: 0  URL: stratum+tcp://east01.us.trademybit.com:4440  User: xxxxxx.1  Password: x
[14:02:02] Press any key to exit, or sgminer will try again in 15s.
[14:02:18] Testing Pool 0
[14:02:45] Closing socket for stratum Pool 0
[14:03:18] No servers were found that could be used to get work from.
[14:03:18] Please check the details from the list below of the servers you have input
[14:03:18] Most likely you have input the wrong URL, forgotten to add a port, or  have not set up workers




Same problem here.
L3pje
Sr. Member
****
Offline Offline

Activity: 283

www.l3p.nl


View Profile WWW
June 23, 2014, 07:14:10 PM
#179

First try with this new miner.
I was running at 3.6MH per Gigabyte Windforce 290

Downloaded this driver:
http://www.guru3d.com/files_details/amd_catalyst_14_6_rc_(14_200_1004_june_2)_download.html

They do get 10 degrees hotter but:




setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x11mod -o stratum+tcp://multipool.minerals.pro:7777 -u X -p X -I 16 -g 4 --shaders 2048 -w 256  --lookup-gap 2 --gpu-engine 1050 --gpu-memclock 1350 --thread-concurrency 8192 --expiry 1
xgtele
Sr. Member
****
Offline Offline

Activity: 285



View Profile
June 23, 2014, 07:55:26 PM
#180

got 4.400 my r9 280x toxic. thank you. Kiss

Could you please upload your generated r9 280x toxic .bin file to mega and post a link here? Thanks
nwls31
Newbie
*
Offline Offline

Activity: 2


View Profile
June 23, 2014, 07:57:13 PM
#181

Great job, my Powercolor 280x have gone from 3.4 Mh/s to 4.3 M/hs using this and just by moving those 8 files from the 14.6 directory, rather than the full driver update.

My config. is as follows if anyone is struggling :

Quote
"kernel" : "x11mod",
"intensity" : "20",
"vectors": "1",
"thread-concurrency" : "8193",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads" : "2",
"gpu-engine" : "1150",
"gpu-fan" : "30-95",
"gpu-memclock" : "1550",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "65",
"shaders" : "2048",
"api-allow" : "127.0.0.1,192.168.1/24",
"api-listen" : "true",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : "true",
"expiry" : "1",
"nfactor": "11",
"failover-only" : "true",
"gpu-dyninterval" : "7",
"gpu-platform" : "1",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

http://i76.photobucket.com/albums/j36/hlxbravo/Noname.jpg



 Wink
DriverDan
Newbie
*
Offline Offline

Activity: 18


View Profile WWW
June 23, 2014, 09:27:26 PM
#182

Has anyone checked if this increases utilization / increases power? Someone said temp went up so that would seem to indicate power draw is up.
jimlite
Legendary
*
Offline Offline

Activity: 1330


View Profile WWW
June 23, 2014, 09:37:43 PM
#183

Anyone worried about the trojan hits on virustotal?

15-35% off anything on Amazon + .01 free BTC with Purse/Amazon https://t.co/ui0FEgypOX
Need to rent Big Hash https://www.nicehash.com/?refby=1393
NEED TO RENT A RIG? All algos at http://www.miningrigrentals.com/register?ref=627
TREZOR HARDWARE BTC SAFE WALLET http://tinyurl.com/olw2qe3
https://rawx.io Secure alt exchange that PAYS you interest!
BTC dice and FREE bitcoin faucet with only 1% edge https://t.co/blurpfa3Q4

  ✵ Super FAST block times      ✵ Block Explorer right in the wallet!     ✵ Stealth Addresses     ✵ PoW/PoS hybrid   
██
██
██
██
██
██
██
██
██
██
██
Ancient Money
for a New World
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
Join the conversation!
██
██
██
██
██
██
██
██
██
██
██

                 ▄████▄▄    ▄
██             ████████████▀
████▄         █████████████▀
▀████████▄▄   █████████████
▄▄█████████████████████████
██████████████████████████
  ▀██████████████████████
   █████████████████████
    ▀█████████████████▀
      ▄█████████████▀
▄▄███████████████▀
   ▀▀▀▀▀▀▀▀▀▀▀

TWITTER


jimlite
Legendary
*
Offline Offline

Activity: 1330


View Profile WWW
June 23, 2014, 09:44:28 PM
#184

OP djm's mega link doesn't' work.
Kozmos link fails virustotal.
Can OP post link again?

15-35% off anything on Amazon + .01 free BTC with Purse/Amazon https://t.co/ui0FEgypOX
Need to rent Big Hash https://www.nicehash.com/?refby=1393
NEED TO RENT A RIG? All algos at http://www.miningrigrentals.com/register?ref=627
TREZOR HARDWARE BTC SAFE WALLET http://tinyurl.com/olw2qe3
https://rawx.io Secure alt exchange that PAYS you interest!
BTC dice and FREE bitcoin faucet with only 1% edge https://t.co/blurpfa3Q4

  ✵ Super FAST block times      ✵ Block Explorer right in the wallet!     ✵ Stealth Addresses     ✵ PoW/PoS hybrid   
██
██
██
██
██
██
██
██
██
██
██
Ancient Money
for a New World
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
Join the conversation!
██
██
██
██
██
██
██
██
██
██
██

                 ▄████▄▄    ▄
██             ████████████▀
████▄         █████████████▀
▀████████▄▄   █████████████
▄▄█████████████████████████
██████████████████████████
  ▀██████████████████████
   █████████████████████
    ▀█████████████████▀
      ▄█████████████▀
▄▄███████████████▀
   ▀▀▀▀▀▀▀▀▀▀▀

TWITTER


zing96
Sr. Member
****
Offline Offline

Activity: 266


View Profile
June 23, 2014, 11:27:25 PM
#185

OP djm's mega link doesn't' work.
Kozmos link fails virustotal.
Can OP post link again?

OP's link does work...just not formatted correctly.

https://mega.co.nz/#!hZUAzQDQ!GrLynWXGP5wFIiDmFpXnTiXV-AI_bkXEFfQrJpbwF1o
jimlite
Legendary
*
Offline Offline

Activity: 1330


View Profile WWW
June 24, 2014, 01:32:18 AM
#186

Oh, should have seen the different color in the link.
So I downloaded it, and virustotalled it.
DOESN'T THIS CONCERN ANYONE?

AntiVir    APPL/Bitcoinminer.Gen    20140623
Baidu-International    Hacktool.Win32.BitCoinMiner.BBF    20140623
DrWeb    Tool.BtcMine.141    20140623
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140623
K7AntiVirus    Trojan ( 00494bd01 )    20140623           MAINLY THESE TROJANS, not the bitcoinminer!
K7GW    Trojan ( 00494bd01 )    20140623
Sophos    Generic PUA GF    20140623
Symantec    WS.Reputation.1    20140623
TrendMicro-HouseCall    Suspicious_GEN.F47V0620    20140623

15-35% off anything on Amazon + .01 free BTC with Purse/Amazon https://t.co/ui0FEgypOX
Need to rent Big Hash https://www.nicehash.com/?refby=1393
NEED TO RENT A RIG? All algos at http://www.miningrigrentals.com/register?ref=627
TREZOR HARDWARE BTC SAFE WALLET http://tinyurl.com/olw2qe3
https://rawx.io Secure alt exchange that PAYS you interest!
BTC dice and FREE bitcoin faucet with only 1% edge https://t.co/blurpfa3Q4

  ✵ Super FAST block times      ✵ Block Explorer right in the wallet!     ✵ Stealth Addresses     ✵ PoW/PoS hybrid   
██
██
██
██
██
██
██
██
██
██
██
Ancient Money
for a New World
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
Join the conversation!
██
██
██
██
██
██
██
██
██
██
██

                 ▄████▄▄    ▄
██             ████████████▀
████▄         █████████████▀
▀████████▄▄   █████████████
▄▄█████████████████████████
██████████████████████████
  ▀██████████████████████
   █████████████████████
    ▀█████████████████▀
      ▄█████████████▀
▄▄███████████████▀
   ▀▀▀▀▀▀▀▀▀▀▀

TWITTER


Bojcha
Hero Member
*****
Offline Offline

Activity: 746



View Profile
June 24, 2014, 02:04:33 AM
#187

what about 5xxx/6xxx cards?

daeminium
Sr. Member
****
Offline Offline

Activity: 367



View Profile
June 24, 2014, 02:07:45 AM
#188

Huh??

the_g00se
Newbie
*
Offline Offline

Activity: 3


View Profile
June 24, 2014, 05:02:17 AM
#189

Thread explaining how to update to 14.6b and compile on BAMT can be found here:  http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/


Achieving 2.7mh/R9270 with this version!  16mh for the rig. Thank you djm34!!

planeswalker
Newbie
*
Offline Offline

Activity: 15


View Profile
June 24, 2014, 05:03:08 AM
#190

If anyone had issues with "locked clock" speeds, I figured out what was causing mine.  One of my rigs has 4x 290x cards in it.  MSI afterburner recently expired, so I upgraded to the latest beta.  This upgrade didn't keep the "enable unofficial overclocking" setting to whatever you had it before.  I re-enabled it, bam, I can change core/mem clock speeds and not have my cards crash at the defaults.

BURST-FLGD-2KP4-X38S-6KSFY
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 24, 2014, 05:06:51 AM
#191


Then u need x13mod-old.

I tried it and got an Error (both x13mod and x13modold):
[08:01:59] Error -11: Building Program (clBuildProgram)
[08:01:59] "C:\Users\leonz\AppData\Local\Temp\OCL352T5.cl", line 1106: error: identifier
          "buf" is undefined
          INPUT_BIG;
          ^

"C:\Users\leonz\AppData\Local\Temp\OCL352T5.cl", line 1112: error: identifier          "buf" is undefined



Try to change -p xxx
just xxx instead what you have now.

try to use -o stratum+tcp://ca.p2pool.sk:7903 -u <whateverdarkcoinaddress> -p xxx

just to see if you get some work.


Tried. No change.


Furthermore.
Today @ morning my antivirus found a trojan in the fixed version. I see people already complained about that. So, I just confirm it.
Switching to NON-fixed version now..

Any suggestion of how to get this stuff to work?
Litejavichu
Hero Member
*****
Offline Offline

Activity: 675



View Profile
June 24, 2014, 05:48:46 AM
#192

what about 5xxx/6xxx cards?

Run fine in 13.12 5850hd 
I18 TC6144
If you let the sgminer compile the default kernel (tc6016) gives problems. Edit a config to tc6144

Reinstall the drivers from the windows panel, not the whole process of catalyst
DedRes
Newbie
*
Offline Offline

Activity: 11


View Profile
June 24, 2014, 09:02:34 AM
#193

Hmm
I suspect I may have some ports filtered out.
Does anybody know the X11 pool operating on port 80, 8080 or 443?

sesko
Sr. Member
****
Offline Offline

Activity: 392


View Profile
June 24, 2014, 09:34:27 AM
#194

If this helps anybody:

2x r9 280x Vapor-x gains (using 14.6 fixed version of sgminer).

- Windows 8.1
- updated to 14.4 ATI drivers, did not gain anything.
- uninstalled drivers with DDU (highly recommended you use this to remove ATI drivers)
- Installed 14.6 ATI beta drivers (without HDMI audio drivers)

x11 data:
--- x11: 4,1Mh/s hashrate on both, it was not stable at first using old sgminer settings
   - bumped up just little GPU core, from 1060 to 1075 (at 1100 i got a lot of HW errors)
   - less undervoltage, before i was having 1,09V, now 1,11V
   - stable 48hours without HW errors
gains combined both gpu's:
   - before 6,2Mh/s......now 8,2Mh/s,   33% gain
   - electricity: before 295W..... now 315W,  7% more electric consumption.
BAT FILE BASIC SETTINGS: --thread-concurrency 8192,8191 -g 2,2 -I 18,18 -w 256,256 --auto-fan --gpu-memclock 1488,1488 --gpu-engine 1075,1075 --gpu-powertune -20,-20

x13 data:
--- x13: 3,1Mh/s on both
   - same settings and vboltage as x11
gains combined both gpu's:
   - before 5Mh/s .... now 6,2 Mh/s  20% gain
   -  electricity not measured yet
BAT FILE BASIC SETTINGS: --thread-concurrency 8192,8191 -g 2,2 -I 18,18 -w 128,128 --auto-fan --gpu-memclock 1488,1488 --gpu-engine 1075,1075 --gpu-powertune -20,-20

As you can see, only difference in settings between x11 and x13 is in worksize. Rest is the same. Trying to bumping up intensity, memclock, thread-concurrency and gpu powertune did not gave nothing more.
innergy
Hero Member
*****
Offline Offline

Activity: 602



View Profile
June 24, 2014, 09:42:26 AM
#195

Got 4.85MH/s stable on 290
Win 7 x64, 14.6, 1000/1300 (every higher memclock causes SICK message sooner or later, due to the known 150-1350 variance.. I think)

Quote
sgminer -k x11mod -o stratum+tcp://drk.coinmine.pl:6090 -u ... -p ... -g 1 -w 128 --lookup-gap 2 --thread-concurrency 8192 --intensity 19 --gpu-engine 1000 --gpu-memclock 1300 --gpu-powertune 20 --auto-fan --temp-target 70

ZenCash        Conducting Private Transactions Worldwide Completely
slack   III   ANN Thread   III   Blog   III   Telegram   III   forum   III   twitter
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬  ▄▄▄▄  ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
nfox
Sr. Member
****
Offline Offline

Activity: 434


View Profile WWW
June 24, 2014, 01:37:38 PM
#196

Anyone tested with linux? what catalyst?
OPTiK
Full Member
***
Offline Offline

Activity: 122


View Profile
June 24, 2014, 03:09:41 PM
#197

Any gains for r9 270? What are people hashing?
whocares
Full Member
***
Offline Offline

Activity: 160


View Profile
June 24, 2014, 03:41:26 PM
#198

Diamond kernel doesn't work(creates ckolivas binary and throws many HW errors).
Should be great if it gets fixed cos groestlcoin kernel doesn't support DMD stratum.
litecoinbeast
Full Member
***
Offline Offline

Activity: 123


View Profile
June 24, 2014, 03:56:55 PM
#199

Any gains for r9 270? What are people hashing?

x11 ~ 2.7
x13 ~ 2.0

The sweet part being still using 13.12 drivers with 14.6 opencl dropped in to folder. So didn't have to use "modded" drivers for Win7x64 to get the 5 270x "recognized".

Was getting ~2.0 and ~1.7 respectively before.

Took about 5 mins...didn't change a thing in bat or conf file.
kaltar
Full Member
***
Offline Offline

Activity: 205


View Profile
June 24, 2014, 03:58:36 PM
#200

Well i;m posting my problem in case someone read this on a previous threads.

all my cards are hashing at the increased Hashrate, GREAT Job btw, you guys are coming up with great improvement before i can deploys the previous ones  Grin

so here is my problems, i have R9 280X and r9 270x running stable
but my Gigabyte R9 290x starts off at full speed, 5.5 mh/s on x11 but at an indeterminate time it will drop to about half speed, card restart doesn't fix this, i have to reboot.

it does this on sgminer416, and also on the sgminer5 and LSB version also. i read other people having this issue, but can't pinpoint the threads anymore.

anyone .?

thanks
the_g00se
Newbie
*
Offline Offline

Activity: 3


View Profile
June 24, 2014, 04:11:22 PM
#201

Any gains for r9 270? What are people hashing?

x11 ~ 2.7
x13 ~ 2.0

The sweet part being still using 13.12 drivers with 14.6 opencl dropped in to folder. So didn't have to use "modded" drivers for Win7x64 to get the 5 270x "recognized".

Was getting ~2.0 and ~1.7 respectively before.

Took about 5 mins...didn't change a thing in bat or conf file.


Config for x11?
djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 24, 2014, 04:20:35 PM
#202

are you speaking about my link
Oh, should have seen the different color in the link.
So I downloaded it, and virustotalled it.
DOESN'T THIS CONCERN ANYONE?

AntiVir    APPL/Bitcoinminer.Gen    20140623
Baidu-International    Hacktool.Win32.BitCoinMiner.BBF    20140623
DrWeb    Tool.BtcMine.141    20140623
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140623
K7AntiVirus    Trojan ( 00494bd01 )    20140623           MAINLY THESE TROJANS, not the bitcoinminer!
K7GW    Trojan ( 00494bd01 )    20140623
Sophos    Generic PUA GF    20140623
Symantec    WS.Reputation.1    20140623
TrendMicro-HouseCall    Suspicious_GEN.F47V0620    20140623
Yes I am a bit surprised too by the result...
I will try to recompile and see if I get the same thing, but not for the moment.
Now as I have stated already, it is better to compile yourself than use any binaries
(and actually, that will be the last I put binaries with my release... problem solved.)

djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
solo20
Full Member
***
Offline Offline

Activity: 184


View Profile
June 24, 2014, 04:25:18 PM
#203

14.6 amd drivers
I install them but when I run
sgminer it crashes any way to to fix this . do I need other files to make it work
was not crashing befor  Huh
litecoinbeast
Full Member
***
Offline Offline

Activity: 123


View Profile
June 24, 2014, 04:58:32 PM
#204

Config for x11?

Here ya go mate...basically a C & P from Lazybear or w/e his name is from x11/x13 mod release (without the hidden 2%):

Code:
"no-adl" : true,
"gpu-powertune" : "20",
"intensity" : "17",
"kernel" : "x11mod",
"vectors" : "1",
"worksize" : "128",
"gpu-threads" : "2",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1120",
"gpu-memclock" : "1500",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "66,66,70,70,70",
"api-mcast-port" : "4028",
"failover-only" : true,
"api-port" : "4028",
"expiry" : "120",
"log" : "5",
"device" : "0,1,2,3,4",
"no-pool-disable" : false,
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
junkun13
Jr. Member
*
Offline Offline

Activity: 44


View Profile
June 24, 2014, 05:06:07 PM
#205

where do you put those files?

Great job, my Powercolor 280x have gone from 3.4 Mh/s to 4.3 M/hs using this and just by moving those 8 files from the 14.6 directory, rather than the full driver update.

My config. is as follows if anyone is struggling :

Quote
"kernel" : "x11mod",
"intensity" : "20",
"vectors": "1",
"thread-concurrency" : "8193",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads" : "2",
"gpu-engine" : "1150",
"gpu-fan" : "30-95",
"gpu-memclock" : "1550",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "65",
"shaders" : "2048",
"api-allow" : "127.0.0.1,192.168.1/24",
"api-listen" : "true",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : "true",
"expiry" : "1",
"nfactor": "11",
"failover-only" : "true",
"gpu-dyninterval" : "7",
"gpu-platform" : "1",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}





 Wink
nfox
Sr. Member
****
Offline Offline

Activity: 434


View Profile WWW
June 24, 2014, 05:09:07 PM
#206

So what files and from where you take them..?
cryptoangel
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 24, 2014, 05:13:03 PM
#207

Oh, should have seen the different color in the link.
So I downloaded it, and virustotalled it.
DOESN'T THIS CONCERN ANYONE?

AntiVir    APPL/Bitcoinminer.Gen    20140623
Baidu-International    Hacktool.Win32.BitCoinMiner.BBF    20140623
DrWeb    Tool.BtcMine.141    20140623
ESET-NOD32    a variant of Win32/BitCoinMiner.BF    20140623
K7AntiVirus    Trojan ( 00494bd01 )    20140623           MAINLY THESE TROJANS, not the bitcoinminer!
K7GW    Trojan ( 00494bd01 )    20140623
Sophos    Generic PUA GF    20140623
Symantec    WS.Reputation.1    20140623
TrendMicro-HouseCall    Suspicious_GEN.F47V0620    20140623

Huh??



Explanation please?.

9 Red flags.

https://www.virustotal.com/en-gb/file/3d0b950d432165c33cf46512344c16d12a34fe9df696ec45eb917c6acacdc888/analysis/1403630203/

djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 24, 2014, 05:27:40 PM
#208

no idea... sorry. (file removed, just in case...)
and you are down to compile it yourself, because I have other things to do than giving explanation over something I don't understand myself.

djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
cryptoangel
Sr. Member
****
Offline Offline

Activity: 322


View Profile
June 24, 2014, 05:31:11 PM
#209

no idea... sorry. (file removed, just in case...)
and you are down to compile it yourself, because I have other things to do than giving explanation over something I don't understand myself.

Lazybears miner just hit 22 red flags :S.

OPTiK
Full Member
***
Offline Offline

Activity: 122


View Profile
June 24, 2014, 05:36:06 PM
#210

Any gains for r9 270? What are people hashing?

x11 ~ 2.7
x13 ~ 2.0

The sweet part being still using 13.12 drivers with 14.6 opencl dropped in to folder. So didn't have to use "modded" drivers for Win7x64 to get the 5 270x "recognized".

Was getting ~2.0 and ~1.7 respectively before.

Took about 5 mins...didn't change a thing in bat or conf file.

Yeah, I'm seeing the same with x11. I originally changed all my rigs to 14.6, but after reading this thread I've gone back to 13.12 and loaded the opencl files into the sgminer folder. This is nice since I can switch back to scrypt-n on the fly.
djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 24, 2014, 05:36:14 PM
#211

no idea... sorry. (file removed, just in case...)
and you are down to compile it yourself, because I have other things to do than giving explanation over something I don't understand myself.

Lazybears miner just hit 22 red flags :S.
Now I understand why the other devs, don't give binaries (unless they have a 5% fee included in there miner  Grin)

djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
Mylo
Full Member
***
Offline Offline

Activity: 196

%insert your text% soon!


View Profile
June 24, 2014, 06:29:53 PM
#212

Guys,

New beta is out amd-catalyst-14.6-rc2-windows-june23.exe

Any input on 270/280x/290 performance?
jimlite
Legendary
*
Offline Offline

Activity: 1330


View Profile WWW
June 24, 2014, 06:37:25 PM
#213

no idea... sorry. (file removed, just in case...)
and you are down to compile it yourself, because I have other things to do than giving explanation over something I don't understand myself.

Lazybears miner just hit 22 red flags :S.
Now I understand why the other devs, don't give binaries (unless they have a 5% fee included in there miner  Grin)

I run windows rigs, and use binaries because no one ever tells how to compile one for windows.
Is it easy or a pain? What programs do you need to download to compile stuff on windows?
I am not a coder, but can build a mean rig and know my way around windows.

15-35% off anything on Amazon + .01 free BTC with Purse/Amazon https://t.co/ui0FEgypOX
Need to rent Big Hash https://www.nicehash.com/?refby=1393
NEED TO RENT A RIG? All algos at http://www.miningrigrentals.com/register?ref=627
TREZOR HARDWARE BTC SAFE WALLET http://tinyurl.com/olw2qe3
https://rawx.io Secure alt exchange that PAYS you interest!
BTC dice and FREE bitcoin faucet with only 1% edge https://t.co/blurpfa3Q4

  ✵ Super FAST block times      ✵ Block Explorer right in the wallet!     ✵ Stealth Addresses     ✵ PoW/PoS hybrid   
██
██
██
██
██
██
██
██
██
██
██
Ancient Money
for a New World
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
██
Join the conversation!
██
██
██
██
██
██
██
██
██
██
██

                 ▄████▄▄    ▄
██             ████████████▀
████▄         █████████████▀
▀████████▄▄   █████████████
▄▄█████████████████████████
██████████████████████████
  ▀██████████████████████
   █████████████████████
    ▀█████████████████▀
      ▄█████████████▀
▄▄███████████████▀
   ▀▀▀▀▀▀▀▀▀▀▀

TWITTER


Newwsr
Sr. Member
****
Offline Offline

Activity: 306


View Profile
June 24, 2014, 06:49:05 PM
#214

I'm mining for with this sgminer 14.6 with this virus even someone already tested?
solo20
Full Member
***
Offline Offline

Activity: 184


View Profile
June 24, 2014, 07:33:21 PM
#215

question is this free
djm34
Legendary
*
Offline Offline

Activity: 1078


View Profile WWW
June 24, 2014, 07:49:59 PM
#216

question is this free

it is free, though donations are welcomed
(however, viewing what I got, 0.09drk and 0.01btc (I take the opportunity to thank the 2 persons who sent something  Wink) I understand why there are more and more closed source...  or with mining fee  Grin)

Regarding the compilation under windows, you have to install mingw (however everything step is explained in details in the doc/windows_build.txt

djm34 facebook page
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
Bawb3
Jr. Member
*
Offline Offline

Activity: 44


View Profile
June 24, 2014, 08:48:51 PM
#217

I really don't think the red flags in virustotal are anything to worry about.
Remember you're scanning an executable (GIANT RED FLAG THERE), from an unknown source/publisher (Another red flag), for an unknown program (another red flag). Why WOULDN'T virustotal throw some flags? Plus zips containing batch files are also going to make them go nuts.

ALSO, "sgminer.exe" has probably been reported as a virus (in their databases) from being maliciously included in downloads (usually from torrents) to mine on people's computers without them knowing.

Just be careful, and watch for odd behavior ... like hidden mining quotas and such Smiley
Real_Unhooked
Hero Member
*****
Offline Offline

Activity: 560


View Profile WWW
June 24, 2014, 08:49:56 PM
#218

Someone please post a conf file for 290/290x.

                                 
                  █████████████████████████████▒
               ▒███████████████████████████████▓░
             ▒████▓                         ░▓███▒░░
         ░▒▓████▓░                            ░▓███▓▓▒▒░░
▓▓▓▓▓████████▓▒               ░░░▒▒▒▒▒░         ░▒█████████▓▓▓▓▓
████████▓▒▒░              ░▒▓▓▓▒▒▒▒▒▒▒▓▓▓▓▒         ░░▒▒████████
▓██▓                   ░▒▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▓███▒░             ███▓
▒███                 ░▓█▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓█████▒░         ▓▓█░
░█▓█░               ▓█▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▓▓▓▓▓▓█████▓██░     ▓███░
 ▓██▓             ▒██▒▒░▒▒▒▒▒▒▒░▒▒▒▒▒▒▒▒▒▒▒░▒▒░  ░▓█▓      ███▓
 ▒█▓█░           ▓█▓▒▒▒▒▒▒▒▒▒▒░▒░▒░░░░░▒▒░ ░▒░░▓███▓      ▒███▒
  █▓█▓          ▓█▓▒▓▒▒▒▒░░░░░░░░░░░░▒▓▒▒░░▒▒▓█████░      ███▓
  ▒█▓█░        ░██▓▓▒░░░░░░░░░▒▓▒░ ░░░ ░░▒▒▓▓▓▓▓█▒█░     ▓███▒
   ▓▓▓▓        ███▒░░░░░▒░░░▒▒▒▒▒░░░░░▒▒▒▒▒▒▒▒▒▓▓ █░    ▒███▒
   ░▓▓▓▓   ░▒▒ █▓▒▒▒▒▒▓▓▓▒░▒░░░░░░░▒▒▒▒▒▒▒▒▒░▒▒▓ ▒█    ░████▒
    ░▓▒▓▒ ░▓████▓▓▓▒▒▒▓▒░░░░░░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒  ██   ░████▒
     ▒▓▓██  ▓████▓▒▒░░░░░░░░░▒▒▒▒▒▒▒▒▒▒▒░▒░▒▒░ ░██▒  ░████▒
      ▓████  ░██████▓&