New sgminer support x11, x13, x14 and x15, fresh (with source)

[adaseb]

I tried just about everything but can't get X15 to work properly.

It works fine on my R9 270X but not on my older 6990 cards.

[basilisk]

Dear. Someone could put a file .bat for mining multicoin with Nicehash with this sgminer? . Thanks

I have 2x280x and 2x7950.

[mrbrdo]

All changes by aznboy84 have been merged to official sgminer v5.0 beta, see this thread for more information about v5.0 https://bitcointalk.org/index.php?topic=632503.0

[Rebeli]

I tried just about everything but can't get X15 to work properly.

It works fine on my R9 270X but not on my older 6990 cards.

You need to use bitblockold kernel and make sure your worksize is not 256, it has to be 64 or 128.

[StuffOfInterest]

Dear. Someone could put a file .bat for mining multicoin with Nicehash with this sgminer? . Thanks

I have 2x280x and 2x7950.

Rather than a batch file you could try this: NiceHash with Radeon

I would suggest running two instances (one for the 2x280x and one for the 2x7950) as the hash rate ratio between algorithms may be different between the two models of card.

[remulan]

one config, 2 profiles

Code:

"profiles" : [
	{
		"name" : "x15",
		"algorithm" : "bitblock",
		"thread-concurrency" : "10240",
		"gpu-memclock" : "1250",
		"device" : "0,1"
	},
	{
		"name" : "x15old",
		"algorithm" : "bitblockold",
		"thread-concurrency" : "7040",
		"gpu-memclock" : "1150",
		"device" : "2"
	}
]

to run
first instance: sgminer.exe -c x15coin.conf
2nd instance: sgminer.exe -c x15coin.conf --default-profile x15old

problem: if set "remove-disabled":true... miner start 2nd instance and card there OFF
if not use "remove-disabled" miner incorrect work with "auto-fan" : true (keep 0% till temp lower "temp-target" and if above set cooler speed to 100%.. and to 0% again when lower target ....)

[basilisk]

Dear. Someone could put a file .bat for mining multicoin with Nicehash with this sgminer? . Thanks

I have 2x280x and 2x7950.

Rather than a batch file you could try this: NiceHash with Radeon

I would suggest running two instances (one for the 2x280x and one for the 2x7950) as the hash rate ratio between algorithms may be different between the two models of card.

Thank you very much for your help my friend, for now goes perfect in my 280x.

Now, with NiceHash control, the program change the most proffit algorithms? or I have to change manually?

Nt: In "Action" I have in Auto. Thanks again

[SpeedDemon13]

I getting nothing but hardware errors with FRESH.

[SpeedDemon13]

I getting nothing but hardware errors with FRESH.

My bad, I put freshcoin as the Algo flag instead of fresh only....lol

Will there be a fresh mod for old AMD cards, ie. 5xxx/6xxx?

[shogun47]

I'm mining a darkcoin variant x11 and am getting my 7970's to 3.12mh each. Does any one have an optimal setting for these cards. This is only a little better than the other x11mod sgminer I was using. I'm hearing i should be getting 4 mh each or better. i'm having best luck with config file so a best case sample of that would be cool.  

[Divorcion]

I have mixed cards on one rig and if I try to set in config

"algorithm" : "bitblock,bitblock,bitblockold"

miner just ignore it, build ckolivas kernel and start with it
suggestion?

I have the same problem, my 2 cards R9-280x and 6950 won't mine, always the complete computer freezes (only "bitblock" setted) or when i try with
only "bitblockold" i got only rejects. But mining x11 for example works without problems.

[litecoinbeast]

I am still getting 25+ hw errors on x15 using the given bin files for 13.12 drivers. Win7x64, 270x. Anyone get this setting "stable"?

[litecoinbeast]

I am still getting 25+ hw errors on x15 using the given bin files for 13.12 drivers. Win7x64, 270x. Anyone get this setting "stable"?

[charmees]

how can I switch to x15 on bamt/smos?

when running x13 I could change kernel type by

kernel: "x13mod" but at when putting x15mod or x15, it says "algorithm x15mod not found"

[Boko]

Tired to compile the Freshcoin Version. This is what i got when using "MAKE"

make[4]: Leaving directory `/opt/miners/freshgpu/lib'
make[3]: Leaving directory `/opt/miners/freshgpu/lib'
make[2]: Leaving directory `/opt/miners/freshgpu/lib'
Making all in submodules
make[2]: Entering directory `/opt/miners/freshgpu/submodules'
Making all in jansson
make[3]: Entering directory `/opt/miners/freshgpu/submodules/jansson'
make[3]: *** No rule to make target `all'.  Stop.
make[3]: Leaving directory `/opt/miners/freshgpu/submodules/jansson'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/opt/miners/freshgpu/submodules'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/opt/miners/freshgpu'
make: *** [all] Error 2


Please help

[aznboy84]

Tired to compile the Freshcoin Version. This is what i got when using "MAKE"

make[4]: Leaving directory `/opt/miners/freshgpu/lib'
make[3]: Leaving directory `/opt/miners/freshgpu/lib'
make[2]: Leaving directory `/opt/miners/freshgpu/lib'
Making all in submodules
make[2]: Entering directory `/opt/miners/freshgpu/submodules'
Making all in jansson
make[3]: Entering directory `/opt/miners/freshgpu/submodules/jansson'
make[3]: *** No rule to make target `all'.  Stop.
make[3]: Leaving directory `/opt/miners/freshgpu/submodules/jansson'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/opt/miners/freshgpu/submodules'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/opt/miners/freshgpu'
make: *** [all] Error 2


Please help

Since the lastest sgminer v5 beta implemented jansson lib as a submodule, you need to pull it down to .... here's the build instructions

cd /opt
git clone https://github.com/aznboy84/freshgpu.git
cd freshgpu
cp -av /opt/ADL-SDK/*.h ./ADL_SDK/
git submodule update --init --recursive
sh autogen.sh
CFLAGS="-O2 -Wall -march=native" ./configure
make

[reza_abay]

Tired to compile the sgminer-5 Version. This is what i got when using
install-recursive
make[2]: Entering directory `/opt/miners/sgminer-5/lib'
make[3]: Entering directory `/opt/miners/sgminer-5/lib'
make[4]: Entering directory `/opt/miners/sgminer-5/lib'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/opt/miners/sgminer-5/lib'
make[3]: Leaving directory `/opt/miners/sgminer-5/lib'
make[2]: Leaving directory `/opt/miners/sgminer-5/lib'
make[1]: Leaving directory `/opt/miners/sgminer-5/lib'
Making install in submodules
make[1]: Entering directory `/opt/miners/sgminer-5/submodules'
Making install in jansson
make[2]: Entering directory `/opt/miners/sgminer-5/submodules/jansson'
make[2]: *** No rule to make target `install'.  Stop.
make[2]: Leaving directory `/opt/miners/sgminer-5/submodules/jansson'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/opt/miners/sgminer-5/submodules'
make: *** [install-recursive] Error 1

my compile config here
#!/bin/sh
mine stop
sleep 5
cd /opt/miners/sgminer-5
cp -av /opt/AMDADL/* /opt/miners/sgminer-5/ADL_SDK/
make clean
sleep 5
chmod +x autogen.sh
./autogen.sh
sleep 2
CFLAGS="-O2 -Wall -march=native -I /opt/AMDAPP/include/" LDFLAGS="-L/opt/AMDAPP/lib/x86" ./configure --enable-opencl
sleep 5
make install
sleep 5
clear
cp example.conf /etc/bamt/sgminer-5.conf
cd /etc/bamt/
patch /etc/bamt/bamt.conf <<.
116a117
>   cgminer_opts: --api-listen --config /etc/bamt/sgminer-5.conf
124a126
>   # Sgminer 5 - Multi-Algo
130a133
>   miner-sgminer-5: 1
.
patch /opt/bamt/common.pl <<.
1477a1478,1480
>       } elsif (\${\$conf}{'settings'}{'miner-sgminer-5'}) {
>         \$cmd = "cd /opt/miners/sgminer-5/;/usr/bin/screen -d -m -S sgminer-5 /opt/miners/sgminer-5/sgminer \$args";
>         \$miner = "sgminer-5";
.
cd /etc/bamt/
mv /tmp/config.patch /etc/bamt/
cd /etc/bamt/
patch /etc/bamt/sgminer-5.conf < config.patch
rm config.patch
sync
echo 'SGMiner 5 Installed.'
echo 'Please review your /etc/bamt/bamt.conf to enable.'
echo 'Configure /etc/bamt/sgminer-5.conf with a pool'

[Boko]

Tired to compile the Freshcoin Version. This is what i got when using "MAKE"

make[4]: Leaving directory `/opt/miners/freshgpu/lib'
make[3]: Leaving directory `/opt/miners/freshgpu/lib'
make[2]: Leaving directory `/opt/miners/freshgpu/lib'
Making all in submodules
make[2]: Entering directory `/opt/miners/freshgpu/submodules'
Making all in jansson
make[3]: Entering directory `/opt/miners/freshgpu/submodules/jansson'
make[3]: *** No rule to make target `all'.  Stop.
make[3]: Leaving directory `/opt/miners/freshgpu/submodules/jansson'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/opt/miners/freshgpu/submodules'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/opt/miners/freshgpu'
make: *** [all] Error 2


Please help

Since the lastest sgminer v5 beta implemented jansson lib as a submodule, you need to pull it down to .... here's the build instructions

cd /opt
git clone https://github.com/aznboy84/freshgpu.git
cd freshgpu
cp -av /opt/ADL-SDK/*.h ./ADL_SDK/
git submodule update --init --recursive
sh autogen.sh
CFLAGS="-O2 -Wall -march=native" ./configure
make

Thanks. U're the best

[mig6r]

it would be really nice to use SEVERAL kernels as in the old sgminer

"kernel": "x13mod, x13modold" -> "algorithm": "marucoin-mod-marucoin modold"

It's possible to compile a sgminer who can do it?

[bensam123]

Anyone successfully get x13 to run? It always crashes sgminer when it's building the bin file.

Building binary marucoin-modtahitigw128l4big4.bin
error -11: building program (clbuildprogram)